Assembling a Rear Bumper Kit | Move Bumper Build

Подписаться 123 тыс.

Просмотров 16 тыс.

50% 1

A complete walk thru on how a Move rear bumper kit was assembled and installed. If you are thinking about trying one out for yourself, be sure to use the discount codes below.
Use the discount code MAKINGSTUFF and save at any of the following:
👉 $50 on any bumper kit - bit.ly/3MUabD5
👉 20% off your order from North Ligths - bit.ly/3KOfDFM
To see a front bumper build check out this video - • Move Bumper Build - We...
🛠 Tools and Parts Used In This Video:
License Plate Post Lights - amzn.to/3K30bq5
Raptor Epoxy Primer: amzn.to/34JQlcr
Raptor Bed Liner with Spray Gun: amzn.to/34Oxv3W
Paint Mixing Kit - amzn.to/3Jd4g9D
Paint Gun Cleaner - amzn.to/3tcpQWo
Dewalt Angle Grinder - amzn.to/3Je9ZfJ
Welding Clamps - amzn.to/3tXp92f
Lincoln Welder - amzn.to/3CHINmQ
Other Making Stuff Videos You Might Like:
Move Front Bumper Build - • Move Bumper Build - We...
DIY Tracked Vehicle - • Taking It For A Spin -...
YesWelder Review - • YesWelder MIG 250 PRO ...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
🌎 Vist the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuff.info
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com/shop/makingstuff
👉Some of the links on this page are affiliate links. This means at no cost to you, a very, very small commission will be paid to Making Stuff to help cover the cost for projects like this one.
👉Thanks for watching!
(C)2022 TMI Enterprises Inc.
#makingstuff
#movebumper
#welding
#dodgetruck
#ramtruck
#offroadtruck
#liftedtruck

Хобби

Опубликовано:

18 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@MakingStuff Год назад

Don't forget you can use the discount code MAKINGSTUFF at both Move Bumpers and North Lights to save $50 on a bumper kit or 20% on lights.

@Movebumpers Год назад

Looks good! Great step-by-step process of building the Classic Rear Bumper Kit!

@MakingStuff Год назад

Thanks! 👍

@andyd1006 2 месяца назад

I watched both your videos for your bumper builds on the Ram. I bought a Move rear bumper for my 02 F-350. I really like the rough texture finish. looks really nice. I plan on getting mine powder coated. just to match the front winch bumper.

@MakingStuff 2 месяца назад

Glad you like them!

@BaxterKaleb Год назад

That bumper turned out great!

@johnmccanntruth Год назад

Looks great!

@imdeplorable2241 Год назад

That's a serious bumper, very stout, and looks great. Spraying that bedliner on really makes a difference. Well done, sir. Well done. 👍👍

@MakingStuff Год назад

Thanks 👍

@christiantheonlyone Год назад

Well done Sir, amazing work .

@MakingStuff Год назад

Many thanks!

@jonathan8349 Год назад

This is a great video, thank you!

@MakingStuff Год назад

Glad you enjoyed it!

@victorpena1755 Год назад

This deserves more likes my friend👍🏽💯

@MakingStuff Год назад

Thanks!

@moparnut6286 Год назад

Pretty cool man! I'd like a bumper like that for my 87 Ramcharger....plus it more fun too weld up your own.

@MakingStuff Год назад

Yeah these things are fun to assemble. Thanks for watching!

@AmateurRedneckWorkshop Год назад

Nice bumper look like you have become the bumper king.,

@MakingStuff Год назад

Thanks!

@andyb7754 Год назад

Nice looking bumper, great job!! One thing, I know you wiped it down with acetone before priming but you also were running your bare hands over it after the acetone which could put body oil from your hands on it. Hopefully you used wax and grease remover (with gloved hands) before priming it. Nice work.

@MakingStuff Год назад

Thanks for watching!

@regsparkes6507 Год назад

Good looking improvement over the o.e.m. chrome bumper,.. perhaps,.. no it IS stronger than original.

@MakingStuff Год назад

No doubt, the oem bumper is a piece of crap. Thanks for watching!

@sundanceseven Год назад

Great video. I'm building the same bumper for a Ram Rebel. What size hole saw did you use for the trailer wiring receptacle?

@MakingStuff Год назад

Sorry I don't remember.

@tfriesen3866 10 месяцев назад

Dial caliper from Harbor Freight can tell you what size you need. Bonus thing: the caliper is reusable.

@psykro5735 8 месяцев назад

Never disconnect your battery for more than a minute .. you will have to reset your radio clock. Instead unplug it then within that minute flip it around and plug it up backwards that will keep the time and it your vehicle wont be grounded since it’s reversed preventing shorts while welding

@PeterJvanHaren Год назад

Real nice job! Skinned your knee caps on the tow hooks yet? ;-).

@MakingStuff Год назад

Not yet! Thanks for watching!

@rainbows99 Год назад

Is that Negan on the door?

@tommysalami3087 Год назад

Im building that same exact bumper. I have a question, how thick of a piece did you weld on to the back of the bumper for the tabs on the trailer plug to engage on?

@MakingStuff Год назад

14ga

@jdirt1982 6 месяцев назад

Is it better to build a bumper, or get a blumper???

@richardcroll3 10 месяцев назад

How well has rhe raptor liner held up?

@MakingStuff 10 месяцев назад

It has held up quite well. The front bumper was done months before the rear and it looks just like the day I sprayed it.

@toddmayta7615 Год назад

I'm kinda surprised you didn't design and cut your own parts on your DIY cnc plasma machine. 😜

@MakingStuff Год назад

This way both the front and back match. I thought about making my own and I do have another truck, Hmmmmm.

@tfriesen3866 10 месяцев назад

Did you not need the hole for the spare tire rod?

@MakingStuff 10 месяцев назад

I didn't have to do anything extra for the spare tire hole on my truck. It is however a tight fit when I lower the spare, but it is do-able.

@DixieNormas 5 месяцев назад

Looking at these two bumpers, how much would you estimate each of them to weigh?

@MakingStuff 5 месяцев назад

Not sure exactly, but they aren't that much heavier than the stocks ones.

@DixieNormas 5 месяцев назад

@@MakingStuff Thank you, that info is still helpful. Didn't want to add hundreds of pounds to my truck...

@TheRainHarvester Год назад

Why is it necessary to disconnect the battery? Just curious

@BigBlueMotors Год назад

So you don't fry the truck computers when tack welding the bumper on the truck. Good question by the way. 👍

@MakingStuff Год назад

What @BigBlueMotors said.

@benjoseph260 6 месяцев назад

Why is the step portion of the bumper sloped? Can't stand on it.

@dwaynelejeune3508 Год назад

No back up sensors?

@tollav Год назад

Unfortunately most offroad bumpers don't come with them

@MakingStuff Год назад

Nope.

@dereksimenac8844 10 месяцев назад

Need some better lights so you can avoid backing into something, too late if you can see it after you hit it, lol

@juanrivera1624 Год назад

It would be nice to find someone here in Ohio who knows how/is willing to install one lol.

@MakingStuff Год назад

I believe there is a list of weld shops that will assemble/install bumpers on the Move bumpers web site.

@phynixbrd Год назад

Looks great!

@MakingStuff Год назад

Thanks!