So far, most helpful ikea sink video I've seen! The clips were driving me crazy, so I'm grateful for the tip. I prefer my instructions in words versus pictures, so the ikea instructions frustrate me (hence why I'm googling videos)! I appreciate that you get to the point and your camera work is 👌. Nice job!!
Did you use any sort of silicone or plumbing adhesive around the seal at the drain? I did not on initial install and everything was fine for about two years. But now it seems to have worked a little loose and has a little leak.
@@UltimateDIY Ok, thanks for the response. I ended up cleaning it out (smelled absolutely awful) and tightened it all back up and seems fine for now.. I have a feeling silicone or putty would help cement it all together so it doesn't work loose.
I have the same sink, there is just one problem. The side of hose that goes into wall is lose I installed the black grommet same as you. What can be the problem?
@@UltimateDIY thanks a lot! I gathered as much from the instructions but had to be sure, as I am going to have it precut by the manufacturer, and Ikea won't confirm
...9 per instructions! I get it, it's two different methods. In theory, you should get to the same result, that is: sink 56 x 53 -> hole 55 x 52, but your/Ikea process allows you to inherently take into account any difference in the actual dimensions of each sink.