We had a great introduction to the ATEM audio pipeline a few weeks ago. Today, we'll discuss audio dynamics and processing on ATEM switchers.
Submit your questions anytime www.askofficehours.global
Join our global community officehours.global
00:00 Intro
14:45 A client of ours just bought an ATEM Studio 4K8 switcher for their in-house studio. We are often asked to run the studio for them, what are the differences in audio processing from an ATEM mini extreme?
16:02 How can I use the built-in delays on my Yamaha DM3 mixer to synchronize audio with video when feeding audio to my Mac via USB or Dante and video through the ATEM?
16:59 I have used the second mic input to quickly bring in audio from a DSLR on-cam Mic for some measure of Room applause of a small Pub. What would be the best way to get room applause and laughter in? I also have a 12 channel mixer.
25:26 What device would you recommend for a tone generator?
26:13 I noticed the best way to have audio sound at a good level on RU-vid is to have audio hitting somewhere in the red. Why is that?
33:34 I find the limiter on the Atem routinely blows past the threshold I set. I have the threshold set to -3db, attack at 0.70, hold at 0, release at 100ms. Is this to be expected?
36:52 Explain how to setup the EQ, compressor, expander, and limiter in the Blackmagic Design ATEM Mini and ATEM Mini Pro.
58:51 My setup is lines from a Presonus 19-4-2 (house), into a Mix-Wizard to a Sony EX camera, and HDMI to ATEM for broadcast. What’s would be the procedure to use tone for the setup?
60:15 You mentioned bringing audio inline with a HDMI into the ATEM - If I am using a mixer how would I do this? From the mixer into a camera or is there another device?
01:01:09 How do you monitor your audio in the Atem Mini?
01:01:31 I have an ATEM mini HDMI ISO. My program feed is currently taking audio from each input. Is there a way to have each input be embedded with its own audio in the recording, or do I have to edit together the iso audio and iso video together? AFV?
12 авг 2024
