Extremely helpful video thank you. Two points I'd add for others, is that 1) an option to the self adhesive tape trick on the rear dome, is to use the tip of the plastic tool and push the bulb out from behind (in between the two contacts) 2) Vanity mirror LED, on the basis the first one you removed is by getting the tool in nearest the centre of the car, but on the other side on my car, it wasn't from the centre, it was also from the left side (when looking out the windshield). there wasn't enough loose wire to return fit it any other way, so perhaps all A3's are the same as mine.
The glovebox was the worst. What i eventually did that worked for me was literally disconnect that housing and inserted the new LED in and reconnect the housing. I blew a few the first time I tried this....I recommend disconnecting the housing.
I’m stuck between a Audi A3 and a Mercedes A class A180 CDI. I prefer the interior on a Mercedes like the fresh board etc, but the main bit is like the hub above the gearstick. How do I change the screen and knobs etc so it looks more modern and not like a mums car. Thanks.
The mirror vanity lights would use a 36mm festoon type bulb which you can find here: www.precisionled.com/shop-by-led/automotive-leds/festoon-36mm-led.html
So I replaced the lights like how u showed in the video, but now when all the doors r closed the lights r still kinda on. It seems like they have some power to them to stay on like 1% Is there a way for them to completely be off or do u knw why there still kinda on
Did you install our PLED LEDs? This can happen when installing a lower quality non-Canbus bulb. This is the reason why we only carry Canbus products. A lower quality bulb may still have some power running through it when the car is off, which causes the light to slightly illuminate.
Hello! I have an 2017 A3 and I want to change the interior lights, but I don’t know if you sell your products in my country or if I can find them. Thanks for you video, it’s awesome
Hi what is the link to purchase this light set? Also Audi scares me and I want to make sure I don’t receive any sort of error message as well while changing them?
Hi! Check out the description box below the video for links to our interior lighting kits. We only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues!
PLEASE HELP I just tried installing LED interior lights on my 2016 A3 but right when I snapped my 4th LED into place I heard a small pop noise and then all my interior lights went out! (the ones I had converted to LED as well as the old lights all of them instantly went out) I probably blew whatever fuse controls the interior lights correct? Is that a common thing to happen when attempting to upgrade to LED's? Thanks everyone for your thoughts!
You most likely blew a fuse, which can happen if you are not using quality CANBus LEDs. However, you would just need to replace the fuse and then you are good to go!
Me pasó lo mismo, al cambiar la luz normal por led en la guantera, corto. Se funde el fusible de 7,5 de la caja de al lado del mando de las luces. Se sustituye y listo. Si investigais un poco por internet es el de la posición 29 del diagrama de fusibles.
I believe the footwells would be stock LEDs. However, if this is not the case, then they would use the T10 fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
