Audi A6 C6 3rd Centre LED Brake Light Replacement (Avant)

Подписаться 1,9 тыс.

Просмотров 32 тыс.

50% 1

In this video I will talk you through each step required to replace a 3rd centre LED brake light on an Audi A6 Avant on the C6 chassis.
Please let me know if you have any questions in the comment section below.
You can really help the future success of my channel by clicking the link below to subscribe, it's free and I will greatly appreciate it!
ru-vid.com...
You can now support my channel with a super thanks by clicking the thanks button below the video.
Support me on PATREON:
/ ryansworkshop
Tools Required:
Flat head screwdriver
Plastic pry bar
Contact cleaner
Links for parts required:
Budget brake light:
ebay.us/FwgcvY
amzn.to/3XSeX9Y
Genuine brake light:
ebay.us/i1VTPt
Safety disclaimer: Ryans workshop is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information.
The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury.
Ryans workshop strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

Опубликовано:

5 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@vakeiniux321 19 дней назад

Thank you! Really helped! Getting old one out was insanely hard... Had to break it to get it out... For the new one I just used silicon to seal it, that way I'm sure water wont get in 😅😅

@RyansWorkshop 19 дней назад

Happy I could help

@user-ui8bj9oy5y 7 месяцев назад

Great video and I successfully changed my rear light after watching it. Getting the old one out was the hardest part and the light, clips and sliding mount also separated for me. I found part of the problem in getting the light out was that the now free clips were catching on various edges of the body work and light recess. When the light is out I recommend cleaning the area where the light is as I found dirt hid the fact there were deposits of rubber from the light seal / cushion (red in colour) which had begun to degrade. When the light was pushed back it needed a firm push at the right hand end (as you look at the rear of the car - the same end as the electrical connection) but the was awarded with a rewarding "click."

@RyansWorkshop 7 месяцев назад

Happy I could help

@PVflying 5 месяцев назад

Thanks for sharing your info 👍

@pilotdavo Месяц назад

Thank you. Great instructional video. Really clear and well filmed. I'll get mine fitted when it arrives in the post.

@RyansWorkshop Месяц назад

Thanks

@stevebox2494 3 месяца назад

Cracking video, straight to the point without all the usual waffle, thanks a lot 👍

@RyansWorkshop 3 месяца назад

Thank you, glad I could help

@waynewatson8036 4 месяца назад

Simple and concise instructions make such a welcome change! Thank you.

@RyansWorkshop 4 месяца назад

Thank you 🙏

@AF-wr8ig 10 месяцев назад

Nice and well explained video. It is very useful for me, thanks!

@RyansWorkshop 10 месяцев назад

Thank you, I'm happy I could help.

@cameronlm 9 месяцев назад

Thanks mate! This video is a massive help

@RyansWorkshop 9 месяцев назад

Glad I could help 👍

@sergiupaval9088 7 дней назад

Thanks 👍👍👍

@DavidDiaz-vn8fe 10 месяцев назад

I'll replace mine in a few days. I hope I can do it right thanks to your video 🙏

@RyansWorkshop 10 месяцев назад

I'm sure you'll be fine if you follow my guide 😜

@DavidDiaz-vn8fe 9 месяцев назад

@@RyansWorkshop I followed the steps, but the light keeps stuck in its place... Everything went ok until I had to release the light. I can move it a little sideways from the outside, but I have no enough place to pinch it and pull it out. ¿Maybe if I lever it from inside? I'm afraid of breaking something :(

@paho188_iron_phill4 2 месяца назад

thanks for guide, i need to change centre brake light on my audi a4 b7 avant hope its same

@RyansWorkshop 19 дней назад

Hope so

@Rebenga89 3 месяца назад

How about audi a6 c7 facelift avant modell is the same to fixit???

@bigmaxxybyrne1063 Год назад

Getting a strange rattle out of my 2016 a6. C7… it happens when the car is running down the revs through the gears it seems to happen about 1300 rpm to 1000 rpm any ideas would be appreciated! 👍🏻

@Svein1971 6 месяцев назад

First thanks for instructions! I've just changed my light now with a new, but I'm not certain if the gasket all the way around really felt thight. Guess it should be thight to avoid water ingress?

@RyansWorkshop 6 месяцев назад

Technically it should be tight, but I've found that that never really feel that great which is why I think the fail in the first place

@Svein1971 6 месяцев назад

Thanks for sharing common quality experience. I'll try come back some later time with more user experience after some rain or car wash.

@PVflying 6 месяцев назад

Thanks for the fantastic video! I know my electrical connector has corroded because first the number of LEDs working reduced, then finally the light failed, so I am thinking the best thing is for me to renew the whole connector when I change the light. So I get a reliable connection which will last. Any idea what the type name for that style of connector is, so I can order one in ahead of time?

@RyansWorkshop 5 месяцев назад

Thank you, to be honest I'm not sure of the plug type without looking further into it

@PVflying 5 месяцев назад

@@RyansWorkshop ok no problem, thanks. I figured out my problem must be water ingress because each time the car is parked outside this problem I get the warning on the dashboard that the 3rd brake light stopped working, but if it’s parked in my garage for a week it must all dry out and start working again, because the warning disappears. So I don’t think I have to replace the connector so much as renew the foam gasket around the lamp housing to make it all leakproof again 👍

@bobbybasic1 Месяц назад

can you replace individual bulbs on the third brake?

@RyansWorkshop Месяц назад

They don't have bulbs, they are soldered LED chips

@laaparicion2eltiempo922 7 месяцев назад

Hi. Could you make a video on how to find the battery inside the Audi A6 C6 and how to recharge it? It would be very useful and helpful.

@RyansWorkshop 7 месяцев назад

Hi, yes I can potentially do a short video on this in the near future 👍

@PVflying 6 месяцев назад

The battery should always be charged via the terminals under the hood / bonnet and never directly from the terminals of the battery itself (which lives under spare wheel well in the boot). You can mess up the energy management module and ultimately damage it or the battery by charging directly at the battery terminals as the BEM (energy management module) can only track the battery state of charge when the proper charging terminals at the front of the car are used.

@bartekzaj 3 месяца назад

Why you did not use second and third clip?

@RyansWorkshop 2 месяца назад

I did

@deathmaniac95 6 месяцев назад

Mine is stuck :( wont come off the lid

@RyansWorkshop 5 месяцев назад

They can be a bit tricky to get out sometimes

@deathmaniac95 5 месяцев назад

@@RyansWorkshop i figured out the previous owner of my car replaced the rear windshield and glued the light with rtv, probably water leaking, so I bought a new light and will have to destroy from outside to change it haha