This is one point what most of us forgot to improve...watch till end...Cheers Mike www.gigawatt.eu... The point at min 7:30, but please watch full video :) paypal: parkranger@web.de
Finally got a house and totally doing a dedicated group for audio. I just need to convince my electrician to use the Gigawatt breaker, installation cable and schuko outlets 😃
@@headquarteraudio5388 He is actually a video/audiophile himself and builds his own amps etc., so lucky find. If the parts are ok to work with and up to local regulations, I have hope! 😀
@@headquarteraudio5388 Hello Mike I've done a bit more digging and have found that Doepke offer an audio grade RCCB in two versions a single phase unit rated at 40amp and a three phase version rated at 63amp. These devices are specifically made for theatres, recording studios and Hifi equipment the contact faces are silver plated and the internal wiring is large gauge high purity copper. The RCCB offers a high level of protection against electric shock only 30mA is allowed to flow when it detects a short circuit to earth, hope this helps.
Hi, since I built and planned my house myself, I made sure that 3x 2.5mm² solid core copper was placed in the wall, a single line without another outlet. In Germany only solid core inwall is allowed.. dont forget the cable in the main fuse box TO the fuse, it must be solid core too ( 4mm² OFC )...cheers Mike
The same thin thin wires in most audio component fuses (the 5x20mm) is also a bottleneck. Wish manufacturers would start using Gigawatt type of breaker
@@headquarteraudio5388 hey ! No I think you're misunderstanding me. I simply mean imagine if the technology in the Gigawatt circuit breaker was in all gear
@@olatiden1148 Hi, i have understood that, in my tuning i use this technologie :)... manufacturer dont understand these things... mostly all... cheers Mike
@@headquarteraudio5388 Well that probably means nothing to most, but it does when you understand how electronic equipment is built, transformer primary resistances, tolerance of components, fact many loudspeakers have series resistances in single figure ohm values. Its pretty obvious upgraded fuses makes NO sense, provably so as well.