AUTOCAD 3D HOUSE SLOPED ROOF | AUTOCAD SLOPED ROOF | 3D ROOF 

Awesome teaching Sir

Thanks for your feed back ... Watch out for more such tutorials in future .....

More than great! Along years I had been trying to find an easy way to build it. Thanks a lot sabeercad.

Your channel is great! I'll be working as a cad designer and your videos are very helpful. Will be watching more. Thanks for this.

Thank you ! This has been a life saving tutorial

Nice, clean tutorial, outstanding job!

you are good teacher, easy to understand thank you very much for this video

I am planing to upload . Please wait for it

Thank you so much sir .l Don't have any idea about Sloped roof thanks for helping me.

You must have selected a the wrong object or the object you have selected may not be closed and continuous . Just make the pline profile once more picking the point the correct order , when you have reached the last but one vertex , just give "close" to exit the pline . Then you extrude with the taper angle

You look like you're an expert. I appreciate your videos they're very helpful for me.

Jajakallah

thank you so much sir.i almost solve my all problems with the help of your tutorial thanks again sir

Just follow the procedure in the video step by step pausing the video , you will definitely get the result . All the best

Thank you Please don't stop your tutorials.

the best instructor, I learn a lot from you

thank you for your tutorial its really a big help for a biginners like me

Excellent teaching method. Thanks, I do enjoy learning.

Thanks Mr:Sabeer.Thanks a lot.

Sir your are amazing tutor, I learn a lot from you. Your explanations are very easy to understand.

tnx this really helps specially in my 3d project house, im having a hard time making this slope roof, hope i can do this :D oh ya i just press subscribe ^_^

wooow you are the best sir . you my much help solve my problem I had on autocad 3d

thanks for the explanation really appreciated it :)

Your roof method is so simple. Thank you.

man you are good. keep it up. God bless you for sharing

Thank you. well done

Nice

Superb sir...... Good..your explanation..............lot of thanks sir

hey ser your great, thank u for everything

the best

Very good

Thank you so much !!!!

Thank you so much sir!

'MAGIC' NOT WORKING! Error message: No solution for vertex. For weeks I struggled to understand what I was doing wrong. Sometimes the 'MAGIC' happened; sometimes it did not. Now I know why. Solution: After selecting the base point or displacement, make sure you DO NOT specify a second point of displacement which is too far (vertically) from your base point. Having said that, thumbs up to the owner of SabeerCAD. Excellent job👌.

Just follow my tutorials step by step . You will definitely get the result . To move the solid roof you have to give solidedit command and go to face option and then take move option and the select the face to be moved .

Very helpful. Thank you.

I am a beginner, thanks for this video guideline

it really a big help thank you man

Very informative.

big help, thumps up for you sir.

You are welcome . Do subscribe to my channel to get mails on my future video uploads.

TY BRO U HELPED ME A LOT

your videos are good. I'm now a subscriber! Thanks!

Hi Sabeer. Thanx for all of youre tutorials but how to make a cable roof? Thanx

thank you for this!

Hello, is that possible that the video get french subtitles, please ? It's a really good video.

i am pretty interested in watching a full 3d house tutorial

thank you so man

I appreciate your thanks

Thanks for the tutorial.Pls can you advise how do you get back to previous view.

You can also create the mould using the SWEEP command

wow, thank you very much.

Awesome tutorial!!

es un programa muy bueno tengo 53 años y en estos momentos estoy haciendo un curso

matur nuwun

thank you too so much for this tutorel

thank you!

great work

Pls, on my AutoCAD 2018, the move is not applying to the roof but when I try offset it works but display the bottom of the roof on top of it as well. What can I do

🖒🖒🖒

Thank you sir

I am the student your vedio tutorila very very thanks sir

great. go ahead, good explanation...

this helps a lot

The Move Faces command give a 'change in topology' error. Do you know why?

That was great!

thank for this vedio bro.

Very nice 👍

Thanks for this tip

extrusion using a path seems valid only on 90deg angles of the polyline on the xy plane. however, i tried using it on polyline with acute angle and the extrusion ignores the path of the acute angled polyline. is this true or is there something wrong on my drawing?

Thank you.

sir your work and your language style is good.....i like your work...g0d bless u... and sir same problem here tapering angle sloped roof. when i make face command then select move aftr slop make equal. nt show in 30 degree nd 60 degree... plz tell me something about this problm.thnanku

please which auto cad do you use 2022 or?

got it!except for the parapet molding part...i can't create the pl arc, don't know what i'm doing wrong, that's why it won't extrude!hahhaha! (what i did was draw a different molding in wcs then made use of the 3d orbit then move it...)

Is that possible to work in 3d plan and then switch on to 2d mode? I need also 2d plans and 3d as well.

THANK YOUUUU

thank you

Thanks men

i love you bro

Sir when i am extruding, this surface is end up with grid lines , how to convert this surface into solid.?

Thank you Sir for your nice tutorial, but I am unable to join the slope d roof edges. Please give me tips. I am working on 2010 version.

verry thanks

i thank u

i figured out lately that my problem is a bug in autocad. i am using autocad architecture in particular. the bug lies to those who are using millimeter as a unit. solidedit command won't work if you are away greater than 1000 units in the wcs. anyway, thank you.

Great

Am having a problem when I try to start putting the roof my line are remaining in 3D I need your help please

I cant do roof slope, every time i tried solidedit then face then extrude but never went full sloped. it always keep halfway but i did put high random number up to move

Interested i want to know More, and then the rendering aspect too

hello sir? how can I access your private video? in the sabeer3d. Your video tutorials are very helpful, appreciated the effort of explaining things clearly and easy to understand. I will be grateful if you can give me access to your private videos

Hello Sir, I have tried a 100 times but cannot get the roof well. Getting stuck at the solidedit level. Followed same process again and again but not getting it. Its a polyline. Please help. Thank you

bro can you pls show! how to move the solid roof? i wont work here!.. when i click the second basement nothing happen!. no majic!

sir when i tried to insert the taper angle it says"self intersecting curve"what will i do???

I was following your command step by step but it can't be move for the existing roof...i'm using autocad 2010 please give some advice how make it properly the slooped roof.

HELP!!! If i decide to take out one window , eventually the wall will still have an empty hole at the place of the window. Can you tell me please how to fill up the empty space? Thank you in advance Mo

Sir, i am student of autocad. i can't draw a tapper roof, when i am extrude the object with tapper, it is showing model operation error and gap cannot be filled. Please give me a reply

I stuck on solidedit level too. I had to do 30 angular roof and I do this:extrude>taper angle>30 (maybe there is something wrong)>50; and next solidedit>face>move... and my roof is so high. Please help

hi sabeercad, Im a student and i learn autocad 3D by myself, and i base on your tutorial to learn but i get a problem like that : when i want to draw a polyline in a plan xOy, the polyline was draw in a nother plan like xoZ. So i wonder what the command to choose a plan to draw. Thanks for your reply.

whenever i move on solidedit command, the autocad would always reply: change in topology detected. i can't close the entire slope with any of the solidedit options including the offset.

how about a full 3d house tutorial.

thanks sir. What software you have used for screen capture?