Auxbeam 6 Gang Switch Panel - 4x4 Light & Accessory Controls

Подписаться 4,1 тыс.

Просмотров 26 тыс.

50% 1

Thanks for Watching. This cost effective little switch panel controller will hopefully be a great solution to control a few lights and accessories around the truck from in the cab. Couldn't spend the money for Spod or Switch Pros at the moment so I wanted to test this thing out instead of wiring up my own rocker switches. Happy with it so far and a really good price.
If you liked the video consider subscribing, mashing that like button. Definitely comment down below with any questions or anything else you might want to share. .
I will link item from the video in the description below. Please connect with us over on instagram @evergreenoverland as well as evergreenoverland.com
Auxbeam 6 Gang Switch Panel
amzn.to/2XG8e4t
Takclife rivnut Tool
amzn.to/35AcDuj
Heavy Duty Lug Crimper
amzn.to/39vaxx7
Have a banner day!

Развлечения

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@alltractx 3 года назад

I've watched a couple of your videos and appreciate your attention to detail. Kudos! Well done!

@Milesamanjaro 3 года назад

Guess I know what's going next into the Tundra. Thanks a lot. You pushed me over the edge. 😎💵

@masteryodaman639 3 года назад

As always, great work! Really appreciate your content

@EvergreenOverland 3 года назад

Thanks for watching. My audio sync being off toward the end is killing me. Oh well, 1% better each week I guess

@lucasbarajas630 3 года назад

Great video, I’m installing the same one in my truck.

@EvergreenOverland 3 года назад

Awesome man. Thanks for watching and good luck. Pretty straight forward.

@rfrontera042 3 года назад

Great video👍🏻 just ordered one for my Tacoma

@EvergreenOverland 3 года назад

Sweet! I hope mgt video helps you out somehow. Thanks for watching

@callansturgeon8356 3 года назад

You look and sound almost identical to the you betcha guy! 😂 nice install I’m looking and doing doming like this in my 76 series cruiser

@ridgedbullet2420 2 года назад

I was thinking the same exact thing. Fist thing that came to mind was the outro to his vids

@stephaniecurlee6936 3 года назад

Hey I really enjoyed the video. I was on the fence about getting one of these. Now I need to decide Either the eight or six switch kit.

@EvergreenOverland 3 года назад

Thanks for watching. Glad it was useful.

@5thGenNativeTexan 3 года назад

On mine, the short primary power cable wasn't an issue, because I always install a large in-line circuit breaker between the unit and the battery. Common practice in high amperage installs. So I just snipped the end off the short cable that came with the unit, installed the circuit breaker, and then used a longer length of heavy gauge wire to run to the battery.

@EvergreenOverland 3 года назад

That's definitely a good call. I installed a breaker for my dual battery in the rear. Even though I'm only running across the engine bay I think that's a good call. I'm going to add one in

@glenniz1 3 года назад

That is the same way I will install my fuse and relay box. A Stinger 75 amp breaker fuse and then 4 gauge primary wire from there to the battery.

@glenniz1 3 года назад

Just got the same model of Auxbeam Switch Panel in the mail from Amazon last week. Looks like a very well made unit, however, I would recommend a bead of silicone around the lid on the fuse box, and some rubber grommets between the mounting bracket and the body of the vehicle. Overall, I am very happy with the price, design, quality, and after watching your video.....the ease of installation!

@EvergreenOverland 3 года назад

Thanks for the advice and for watching the video

@glenniz1 3 года назад

@@EvergreenOverland the video was very well done and quite informative. Keep up the good work!!!

@EvergreenOverland 3 года назад

Thanks for the encouragement. they'll keep coming good sure.

@DuanDao 2 года назад

you can always run a circuit breaker from the fuse panel and then you can use whatever length you need to go to the + on the battery terminal

@woodsmanadventures1492 2 года назад

Awesome video. Thanks for sharing. Question. Can this be use with auxbeams strobe pods? Or do I have to use the provided switch that comes with the pods? Wondering if the gang has the software to run the different strobe functions. Amber and white pods. Thanks in advance! New to the channel!

@johnburke8582 3 года назад

Great video and installation! I would put the power cables in some split plastic loom just to be safe, but that’s just me. Might be overkill.

@EvergreenOverland 3 года назад

That's a good call and also on my list to do. Do you prefer the plastic split loom or the fabric mesh stuff?

@johnburke8582 3 года назад

@@EvergreenOverland I like the look of the plastic. It is also easier to install after you get everything mounted.

@brianparsons5904 3 года назад

You had the best video for this install, great idea on the rivet nuts. I was looking under the hood for about an hour trying to figure out where to mount. Now I got to buy the tool. What size rivet nut did you use? Enjoyed the video.

@EvergreenOverland 3 года назад

Thanks man, glad you liked the video. I have kind of standardized on 1/4 x 20. Kind a good middle ground I find.

@jasonthurman9922 Год назад

Can you share some pictures, of how your winch controller is mounted.

@taadventures6312 6 месяцев назад

How did the Auxbeam switch panel work out over time. Thanks.

@leerodriguez7842 2 года назад

Looks good how durable is it know that you have it for a while?

@officialWWM 2 года назад

There seems to be 3 versions of this thing. One has a clear fuse box and comes with a fused link to the battery. It also has solid state relays. The other has a similar fuse box to this one, with solid state relays and a main power switch on the power cable to the battery. Then there’s this one, my least favourite cause it has those huge, old school relays.

@EvergreenOverland 2 года назад

They must have come out with updated models

@lukebaldwin3682 2 года назад

The 8-switch panels have Solid State Relays, one has you accessory power wires coming out both sides and the other has you light wires on one side. They are both not waterproof, which is the advantage of the box for the 6-switch Relays. I bought if for that factor.

@officialWWM 2 года назад

@@lukebaldwin3682 I bought the 8 gang one. Sure it might not be waterproof but that doesn’t bother me, I was able to mount it somewhere dry 🤷🏻‍♂️ I would rather have the extra 2 switches.

@AyeMcCloud 2 года назад

So the Acc wire is only for the light power when the vehicle is on? Would I just use an inlay spice then?

@17chevyrado27 2 года назад

Can I use the fuse tap on any fuse as long as its one that is off when the key is off and on when its on?

@errndog Год назад

So are the fuses slot specific?? Meaning if I put a 20 in the 30 slot would it work?? Can you add more 30amp fuses?? If I only need a 15amp fuse can that be used in one of the slots??

@garydixon3277 2 года назад

Do individual wires coming from the battery go to each circuit/switch. I would like to replace one source wire and tap in a highbeam circuit for my light bar that switches its own relay.

@EvergreenOverland 2 года назад

Only one wire from each of the positive and negative connection of your battery go into the auxbeam switch panel. From there it has the six different circuits that can go out. Not sure on the specifics of how it would work for your application though.

@Warpetrie 2 года назад

How's it working 11 months later?

@ryanhusid7332 2 года назад

Hey can you let me know where you got that net that is in the backseat inside roof of your tundra ? I have an 06 4x4 and like the organization idea.

@EvergreenOverland 2 года назад

Hey Ryan, Not sure the guy makes them anymore. I would reach out to Blue Ridge Overland Gear to see if they have one that might work

@PKDiver 3 года назад

Where do you hook up the negative wires on the accessories like a light bar? From what I can tell you only plug in and screw down the positive wires. Am I wrong?

@EvergreenOverland 3 года назад

I mounted the negative wires to the same nutsert/bolt in the auxbeam mounting holes which grounds it out to the inner to the chassis by the way of the inner fender it is mounted to. Thanks for watching.

@patriotsedge6730 3 года назад

Ok, maybe I missed something. Does whatever you're hooking up to the relay box get both the HOT and GROUND wires hooking into it? Which of the screws gets the HOT and which gets the ground on the Auxbeam relay box? It's not labeled that I can tell and the included instructions don't make sense to me.

@EvergreenOverland 3 года назад

I ran a negative wire for my lights all the way back to the unit and grounded them out on the mounting bolt I used in the engine bay but honestly you could ground it out anywhere on the chase I'd think.

@Buzz944 Год назад

As per Auxbeam the wire gauge for the 8 gang is 7 AWG. Does it mean in order to extend the battery wires I have to use 7 AWG wires for the Red and Black wires?

@EvergreenOverland Год назад

Honestly depends on how far one is extending it. I don’t have the chart available to me but there are metrics online show how conductivity drops at what distance for 12v wiring. If I needed to only go a few more feet I would use more 7awg but if I was going a longer distance I might rewire all the way back to the unit with a larger gauge.

@phill1491 3 года назад

Is that Acc wire just for the backlight on the switch panel? Or does it also limit the accessories to only come on when the ignition is on?

@EvergreenOverland 3 года назад

Correct on the second one. It controls when the accessories are powered or not. I guess you could hook it to an always on fuse for use when the vehicle isn't running, but the backlight to the unit would have a slow draw on the system. Thanks for watching Phill.

@YamadaFaka 2 года назад

If the backlight is always on even when the truck is off, will it drain the battery fast?

@smfmotors 3 года назад

Thanks! Just ordered the 8 gang. What gauge wire do you recommend for 12v outlet that will be wired to this? It will be used to charge a 1500wh battery.

@EvergreenOverland 3 года назад

I'm confused how you are wiring a battery charging system through this. So are you going to be turning on and off a relay or solenoid? Thanks for watching

@smfmotors 3 года назад

@@EvergreenOverland I will be wiring a 12v outlet to this. That 12v outlet would be used to power a 300w inverter which will have a Bluetti EB150 portable battery connected to it for charging.

@EvergreenOverland 3 года назад

What I found it really depends on what amperage you use. I know the auxbeam have different amperage outputs for the different connections. My gut would be to use a 20amp or the 30amp output for your 12v socket, but it will really be limited more by the 12v socket plug that you get. I found a Nocco for 15amp. Not sure if there are others at higher amperage, but I would size the port you use on the auxbeam to whatever the maximum input of the socket is that you get. All that to say if I were doing that I would probably oversize it and do 10 gauge since you will have some voltage drop over the length of wire either way.

@smfmotors 3 года назад

@@EvergreenOverland I planned on putting it to the 30amp. 10 awg it is! Thanks again! Keep the vids coming!

@torsteingravdal2568 2 года назад

Hi, dose it remember the position of the switches when you turn of and on the key?

@officialWWM 2 года назад

No.

@davidjensen5626 2 года назад

So how do the actual light wires feed into the panel? I got mine second hand and it looks like there’s only one hole per switch, so where do all the grounds go?

@motorcyclemanthony1552 2 года назад

You can feed the positives to the panel and secure the grounds to anywhere on the frame. Any bare steel you can access.

@91cat 3 года назад

Is it possible to chance fuses to higher ones without damaging something?

@officialWWM 2 года назад

Yes.

@motorcyclemanthony1552 2 года назад

Strange that the 6 switch is for 720w and the 8 switch is for 600w. My lightbar is 780w

@anselhiggins4912 3 года назад

Super interested in doing this. Currently in the process of building out my tundra as well!

@EvergreenOverland 3 года назад

Awesome! What year is your Tundra? Thanks for watching Ansel.

@anselhiggins4912 3 года назад

@@EvergreenOverland ive got a 2004 Double Cab! Found your channel last year trying to gather ideas for what i ultimately want to do.

@krustythecarhauler 2 года назад

I added wire and mine is mounted in the bed of my truck

@__waffle_soup__7909 3 года назад

The whole install idea for me makes me nauseous. I'm not knowledgeable about all this. That being said, this video helped me 100%.

@EvergreenOverland 3 года назад

I completely get it. It honestly is only intimidating until you start gaining some skills and knowledge. If I can do it anyone can. Thanks Waffle Soup for watching and commenting on the video. It helps with staying motivated when people reach out.

@hooddreamer20 3 года назад

Whats the total amps ....

@EvergreenOverland 3 года назад

I believe it is 60amps max. Thanks for watching!

@hooddreamer20 3 года назад

@@EvergreenOverland how is it 60 and has more than 60amp fuses

@EvergreenOverland 3 года назад

This is what the description says. Operating voltage:12V; Max output power: 720W. Max input current: 60A

@hooddreamer20 3 года назад

Can u have all your switchs on at the same yime or will it blow a fuse

@EvergreenOverland 3 года назад

Each which is individually fused. I only have three of the fuses running any power through them but I can use all three no problem. I don't think it would be an issue as long as you don't exceed 60 amps draw Total and your fuses are sized accordingly. I would honestly message the manufacturer through Amazon and let them know what you're trying to run on it. I'm sure they could tell you 100% whether work for your application or not