Your Rig NEEDS This Auxiliary Switch Panel!

Подписаться 19 тыс.

Просмотров 66 тыс.

50% 1

Clean up your wiring with an auxiliary switch panel by AuxBeam!
Get the Auxbeam switch panel here: www.amazon.com/dp/B08RRV197G
The riv nut tool I used:
www.amazon.com/One-Sight-Exqu...
(The switch panel was sent to me for install and review by AuxBeam)
==========================
Music on my videos provided by Epidemic Sound. If you’re interested in royalty free music, click here and help me get to ambassador!share.epidemicsound.com/1eeb7m
Thank you to my sponsors: Lightforce (www.lightforce.com), 67 Designs (www.67d.com) & Zero Breeze (www.zerobreeze.com)
Thank you to my Patreon supporters Cameron Matsumoto, Kurt Barone & Brady Wilson!
Thank you also to the companies that have supported this channel: MyMedic (www.mymedic.com), Midland Radio (www.midlandradio.com), Gorilla Dirt (www.gorilladirt.com), Pillow Cube (www.pillowcube.com), Front Runner (www.frontrunneroutfitters.com), Harbor Freight (www.harborfreight.com), LasFit (www.lasfit.com) and FreeSpirit Recreation (www.gofsr.com)
To check out my affiliate links for products I’ve reviewed, check it out here:
LIGHTFORCE: (use BAPTISM10 at checkout for a 10% discount): www.lightforce.com
67 DESIGNS: www.67d.com/baptismoverland
FRONT RUNNER: bit.ly/3u0iZ52
MYMEDIC: bit.ly/45NSbCA
ZERO BREEZE (use code ZBYTB for $50 off): bit.ly/3QxRBUW
MIDLAND RADIO (use code baptismoverland for 10% off): bit.ly/3QBAgdZ
OFF THE GRID SURPLUS: bit.ly/46UTlxy
LASFIT (use code BAPTISM at checkout for discount): www.lasfit.com
==========================
**We got new PVC patches courtesy of www.GS-JJ.com! Go check them out to have patches and other marketing products produced!
www.gs-jj.com/pvc-patches/Cus...
If you want MY patch, message me on Instagram @baptismoverland or send me an email at blesstheride@gmail.com**
==========================
Don't forget to subscribe to this channel and support us on the following social network platforms:
Patreon: www.patreon.com/baptismoverland
IG: @baptismoverland

Авто/Мото

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 177

@BAcHIGU_ 3 года назад

At least your real brotha! A lot of these tubers basically have sponsored rigs. 🤙

@BaptismOverland 3 года назад

I mean lemme not lie…if I get a call fr a company wanting to sponsor my rig….😂

@BAcHIGU_ 3 года назад

@@BaptismOverland but at least you will say it's sponsored

@BaptismOverland 3 года назад

@@BAcHIGU_ these are facts

@DarealAGee 2 года назад

I've been looking for a video to install this system for my 2021 tundra and bro....this is a great video! You're information is very detailed, simplified and it just so happens its for a 4runner! The layout under the hood is pretty much the same as the tundra. I love this video thank you man! now I'm pulling the trigger in my checkout box for this kit. 👍👍👍👍👍

@overlandfun Год назад

Best auxbeam install video. The white overlay diagrams are SUPER helpful. Thanks!

@BrentWmBauer-li7vh 7 месяцев назад

Excellent walk-thru! Chose the same unit for my 99XJ build. Love the results. Thank you!

@FRMN8R_T4R 2 года назад

Bro - BEST video ever as I'm at the front-end of my 2020 4Runner build and trying to do this RIGHT (and with some thought/planning) from the get-go. One of my favorite channels - keep it up my friend!

@craigversetti5700 2 года назад

Years back when I had a 78 K5 Blazer all set up for off-road and camping I had the power welder from wild horses ( I think was the name ) installed and it was AWESOME !!! It was expensive but I got it on a 50/50 Barter , it saved my ass a couple of times when I didn't have replacement U - joints and when my tie-rod busted . I regret letting it go when I sold the K5 and would love to get another one but that 1400 bucks can go along way in other areas right ....

@AddkisonAlesAndLagers 2 года назад

Clean install! Love the switch location.

@kazecl9600 2 года назад

Best video I've seen regarding this product. I'll buy and install it myself

@xblack1209 11 месяцев назад

Kudos! I really like the videos you are making. been looking for some good options for my 4x4 overland build with LR3. and some of the ideas are well thought. keep it up!

@Dutch1951x 2 года назад

Another GREAT video, thanks!

@neiloneill9208 2 года назад

Love the video and explanation. Thanks.

@wanderlostNW Год назад

Great presentation, bro!

@greggkerber1936 Год назад

Excellent video and review

@drummerdudextream Год назад

I have this one and love it adding accessories to it is soo easy

@BaptismOverland Год назад

Yep. My only issue is it doesn't have negative terminals built in on the 6 switch (it does on the 8 switch)

@ronhughes1822 Год назад

Hey Bro, I just started watching this video, and I just had to shout out! I like your attitude, honesty and straight forward way of presenting useful info. Hey You Tubers... take note, this is how it should be done..You rock dude!

@BaptismOverland Год назад

Thanks brother!

@benmiller9544 5 месяцев назад

Love the Chanel brah!!! Mad sick content keep it up brudah

@supayota7265 2 года назад

Thank you for the information, Man! I subscribed because I need your help! Haha. JK. I'm new to electrical wiring, and your content was top notch! Keep up the good work!

@Winch_Offroad Год назад

Hell of a video, I watched all of it even though I didn’t need the information.

@greatcrossings Год назад

Very helpful! I got mine installed today. Like you said it’s fairly easy install, the only challenge part for me is the red line connection with the fuse box under the steering wheel, for some reason it didn’t get power at first, couldn’t find the reason, then unplugged the fuse and flipped the other direction it worked. Weird, thought either direction would work.

@colinarnold3726 Год назад

that's why I found a fuse in the engine bay box and wired it in that way. Didn't have to run the red wire into the cab.

@carlosholguin6739 Год назад

Amazing, just subscribed 🙏

@gilhernandez605 5 месяцев назад

I will be installing provisions to possibly hook up a welder to my RAM in the future.

@Senki207 2 года назад

Some people use their welders in remote areas. These are "mobile welders" usually mounted to a truck, usually powered by diesel / petrol generators. However, using an inverter and some huge batteries, it is possible to wire a smaller welder (usually stick / flux core) into a dual battery system (less "dual" since they usually use a powerbank made from multiple batteries). Welding on fences / cabins / remote infrastructure that doesn't have power is much easier from a truck modified into a mobile welding station that running idk how many km-s of cord / cable to the site, especially since it can easily be damaged by rocks / wildlife or traffic. Welders draw a lot of amps, so you don't want a live wire touching a puddle or something.

@alfonsoalvarez5349 Год назад

Comment was meant for another product bro.

@alexisduarte3917 15 дней назад

The welder thing is for not getting stranded on the trails if you break a link or your drive shaft having a welder is pretty useful

@BaptismOverland 14 дней назад

So I've learned haha. This was so long ago. I've seen some things since then

@love4steel Год назад

for the placement of box... you could mount same place, but use longer bolts going to your rivnuts... and then use barrel spacers to push it out off wall a bit

@BaptismOverland Год назад

Yep. I actually ended up doing that. Crazy thing is their new version actually has space now.

@twitchc6c723 2 года назад

Building an off-road racing chase truck currently and looking for a switch panel….eventually the truck will have welder on it. 🤣

@Piklikr 6 месяцев назад

Nice Vid... Sold

@crazy-eyewoodguy4489 9 месяцев назад

The cut is an offering to the car gods....no blood, it will never work :)

@BaptismOverland 9 месяцев назад

I say the same thing about my knives. You don't own it until it cuts you

@MrRocket654 4 месяца назад

I liked your video, you do a good job explaining the process. I have a 2020 Ram 2500 Tradesman that does not have fog lights so I am wanting to install some. I have looked at several difference options and I can't help but believe using a controller like the Auxbeam is the answer. However I have looked in the engine compartment and I don't really find a place to install the control box around the battery or firewall. My Question is have you installed one on a 2020 Ram 2500 with the 6.4 Hemi, if so where did you put it.

@BaptismOverland 4 месяца назад

I have not no. Man I hate how new vehicles leave no room in the engine bay anymore!

@shanemilway3740 2 года назад

One downside I found was you can't use the high beam with your high and low beam toggle has to be done manual pushing of buttons on and off which gets annoying on highway

@overlandvoyager2780 11 месяцев назад

I use a Switch Pro 8 switch panel in my Taco and it keeps everything clean.

@wildxtrek24 Месяц назад

This is such a great video! Thank you. How does this wire into your Xprite trailing bar? Were you able to maintain the functionality of the amber flashing lights?

@BaptismOverland Месяц назад

You don't wire it to a chase light because of how it's setup. Like, you COULD but you still have to install the chase light switch cuz it has 3 positions so really you're gonna have to press two switches just to activate it. Would be pointless

@seandalejackson2525 2 года назад

!!Beast Mode My Man!! Appreciate Cha! P.S. Ya know what I'd like to know, is why is the 6gang fuse/relay box sooooo much nicer than the 8gang?!?!

@harrellellison9243 8 месяцев назад

Wow that was easy

@Onebandit 2 года назад

Some of jeeps who off-road a lot in the rocks will have these welders on their rig for those times when you break something to get you home

@BaptismOverland 2 года назад

I legit wanna learn how to weld. I have so many ideas I can't execute because of that lack of skill lol

@ifitsnotbrokenfixit1193 2 года назад

@@BaptismOverland no better time to learn is now if you can.

@IvanHz-21 3 года назад

What do you think of the Voswitch system? I am running the voswitch jk100 on my Jeep and it was plug and play. I would recommend installing a fuse or a circuit breaker from the battery to the auxbeam system or you risk burning your Jeep. It’s similar to the previous electrical issue you had before.

@BaptismOverland 3 года назад

I’ll look into it but I’m running ApolloIntech now

@BaptismOverland 3 года назад

At this point both vehicles now have a switch pod system that works. If any of them fail I’ll look into Voswitch

@Jim-uo7mz Год назад

Hard core wheelers take some kind of welder with them. They break it weld it and repeat.

@BaptismOverland Год назад

Yep I've learned that since lol

@mikesweeney5685 Год назад

Came across your channel and this video, very informative so I like and subbed. Even though I only have 2 lighting mods for my 2015 4Runner Limited - Engine bay LED lights and Raptor lights and don’t plan on anymore, at least for now, lol! 🤓😊But I’ve been curious about these affordable switch pods so this was good for me to watch. Like others have said, I would mount this on a tray so it can sit horizontally away from the fender wall. Also, not too crazy about drilling holes in my dash to mount the switch pad. I’ve seen where others have mounted it in the same spot using 2 sided tape so it lays flat on that shelf. Any thoughts on doing if that way?

@BaptismOverland Год назад

You def can. It's light enough to just use some really good adhesive. My problem is we live in Florida where it gets really humid and every time I use adhesive to mount anything, the heat and humidity eventually gets to it and it comes off.

@mikesweeney5685 Год назад

@@BaptismOverland Good point on the adhesive.

@BaptismOverland Год назад

@@mikesweeney5685 I feel like if you do it discreetly and just punch one hole somewhere it should be ok. Besides it makes wiring sooo much easier and then if you sell the vehicle keep the pod there for the next person and just take your lights

@colinarnold3726 Год назад

It comes with a double sided adhesive pad.

@FRMN8R_T4R 2 года назад

About the mounting of the box and being too tight to the body wall to remove the cover - thinking I'm just going to go ahead and mount this whole setup to an aftermarket tray (or just fab one myself) like from SDHQ or PowerTrays or something....

@BaptismOverland 2 года назад

Yes! Def do something else cuz it's annoying pressed up against the wall. In retrospect wish I woulda done that. I probably will. Maybe some spacers

@johnielake Год назад

y not just use a spacer/washer, enough 4 clearance?

@markouellette788 8 месяцев назад

I see this video is 2 years old. I am curious if you still believe the quality and functionality of this switch is good. I am leaning toward this switch pod.

@BaptismOverland 8 месяцев назад

Oh yeah and I've still recommended it to people. Works great. I'm actually considering another one for other accessories I plan to add to the dual battery system

@americanmade422 11 месяцев назад

Add washsers to the bolts so it gives room to take the lid off the box

@BaptismOverland 11 месяцев назад

Yep did that already. The newer version actually opens differently so I'm glad they changed that

@stephanm.4715 6 месяцев назад

Are the fuses interchangeable? Can I replace a 20A with a 10A?

@BaptismOverland 6 месяцев назад

Yes of course! And so are the relays. One of the relays failed and I was able to just swap it out. It has to be that way because they won't know wha r you'll be hooking up to it

@7sunsetmaro7 Год назад

Maybe add spacers behind the box between the mount and body. Could use a rod or something and cut it so the screw goes through it or something.

@BaptismOverland Год назад

Actually did that! Crazy because their new versions have the space now to open it!

@soynwasabi Год назад

Welders are pretty common in rock crawling scene

@BaptismOverland Год назад

So I've learned 😂

@erniegarcia4724 3 года назад

So you have to ground every groundwire to the frame? The other Auxbeam you put both wires into the box.

@BaptismOverland 3 года назад

Exactly! Kinda sucks cuz on my Jeep both go into the box too.

@BaptismOverland 3 года назад

In a way, it COULD be advantageous. For instance, if I’m putting rear lights, I only have to route the + wire up to engine bay and I can ground it somewhere closer to the back

@SHORTSCOMP777 20 дней назад

I just bought this and after seeing the video I am purposely breaking the back tabs to make it easy to open

@BaptismOverland 20 дней назад

Yep lol. I ended up putting spacers.

@bretthumberstone8148 Год назад

I think you said add it to the acc which is a 5amp in the cabin. I went to use the aux beams add a fuse but the Tacoma’s fuses are low profile so I couldn’t fit the tacomas fuse in the auxbeams add a fuse. Do I need to get normal 5amp fuse? or will I need a different add a fuse that has low profile fuses?

@BaptismOverland Год назад

Funny I JUST installed one of these last night! So you're in luck. Lol. So Toyota uses mini fuses but the problem is they use the kind without the long prongs. You can fit the add a fuse fr the auxbeam but then there's no way to add the yota fuse into the add a fuse. You'll need to go get a mini fuse in the same amperage but with the longer prongs to replace the yota one

@bretthumberstone8148 Год назад

@@BaptismOverland Just what I was looking for! I will be grabbing a extra 5amp fuse with long prongs so I can use the auxbeam add a fuse! Thank you!

@BaptismOverland Год назад

@@bretthumberstone8148 yeah man. LITERALLY did this last night on my friends Runner and I forgot what I had done before till I remembered 😂 LUCKILY I had an extra fuse laying around for my wife's Runner or else we couldn't have finished the install.

@bretthumberstone8148 Год назад

@@BaptismOverland Haha exactly! I got the temporary mount done and wires through the firewall but couldn’t go further than that!

@agentelopez82 9 месяцев назад

I have 2 set of led lights, different switches , different harness inside the cabin three wires is there any different on my case? Thanks!.

@BaptismOverland 9 месяцев назад

Do you have the 8 switch one or 6?

@agentelopez82 9 месяцев назад

@@BaptismOverland 6

@BaptismOverland 9 месяцев назад

@@agentelopez82 I'm trying to figure out what you're asking. Are you asking if you could use all those accessories on this switch pod? If so yes. You can get rid of all the switches and wires and just plug directly to the switch pod

@enice617 2 года назад

I’m a noob. I have a question: do you need a switch pod WITH this auxbeam kit?

@BaptismOverland 2 года назад

This auxbeam kit IS the switch pod.

@sturgeonman5208 2 года назад

Do you have an update on how the system is working after a year of use?

@BaptismOverland 2 года назад

Oh it's fine. Tons of aux items already plugged into it and it's still going like a champ.

@fredA1234 2 года назад

What do you think about this compared to switch pro for the $? I just ordered a new truck and will need one. Which one would you get. Thanks

@BaptismOverland 2 года назад

Heard a lot of great things about the Switch Pro. I couldn't give you my honest thoughts as I've never used one but all these systems are pretty much the same. I have the ApolloIntech installed in the Jeep and love it and I've also loved this on the runner too. It does what I need it to do.

@fredA1234 2 года назад

Any idea why they only make this for a jeep and nothing else? I like that it mounted to the pillar. But mine is a ram

@BaptismOverland 2 года назад

@@fredA1234 the ApolloIntech? I'm not sure. I like it also. But I WILL say this auxbeam in the runner works really good and it's universal

@finger8588 2 года назад

thanks for the sharing! but have you considered to mount it on top of the stock fuse box (the plastic cover) instead of the side? If yes, do you think of any cons of doing that? coz i’m just bought the auxbeam but don’t wanna drill a hole into the rig.

@BaptismOverland 2 года назад

Absolutely I did. But think about this...there's a ton of wires coming out of this thing. If it's on top of the fuse box, when I need to get to it, I'll have to move the lid AND this box with all the wires. It's just a lot more mess to deal with. I would rather just have it to the side

@BaptismOverland 2 года назад

Also I would rather drill a hole in the rig where it's secure vs mounting it to a plastic lid because the box will be slightly heavy and I don't want it bending the plastic lid of the fuse box. Also if you drill the lid you'll destroy the fuse chart underneath it and I def don't want to do that

@finger8588 2 года назад

Got it sir! really enjoy your vid, looking forward to your next one.

@finger8588 2 года назад

The fuse adapter originally comes with a 5A fuse, so i add extra 7.5 stock fuse on top to a 7.5A slot, coz add up its 12.5 which more than the 7.5A spot thst i insert, would that blow my battery? thanks!

@BaptismOverland 2 года назад

@@finger8588 well the fuse is so that the battery doesn't blow lol. You have to figure out the amperage of what your powering and that's how you determine what fuse to put in. You can def swap the fuses but you need to get just slightly above the amperage of your accessory so if it runs to hot it'll blow the fuse and NOT your battery or start a fire

@2448juan 2 года назад

What fuse did you use in the add a fuse, what numbers. I cant seem to get the button controller to get power.

@BaptismOverland Год назад

It was a mini because that's what Toyota uses. I don't remember now what amps. I think it was 20. Have you tried turning on the unit? Because I know someone that thought it wasn't getting power but didn't realize there's an on off for it.

@bretthumberstone8148 Год назад

@@BaptismOverlandI think you said add it to the acc which is a 5amp in the cabin. I went to use the aux beams add a fuse but the Tacoma’s fuses are low profile so I couldn’t fit the tacomas fuse in the auxbeams add a fuse. Do I need to get normal 5amp fuse? or will I need a different add a fuse that has low profile fuses?

@hmoobfire Год назад

Welder are for real offroad.......rock crawler, Baja desert, dunes.......I seen people on the Rubicon and Fordyce trail welding knuckle steering arm etc just to get back on the main road so it could get trailer home

@BaptismOverland Год назад

So I've learned!! And have actually seen it since too lol.

@jasoncfm361 2 года назад

How have you liked the Badlands winch?

@BaptismOverland 2 года назад

Been awesome! I actually winched someone out of the sand last week (damn tourists lol) and made $50 haha

@paul.aragon 2 года назад

do you know of a similar solution that is smaller for motorcycles?

@BaptismOverland Год назад

I do not. That would be dope!

@MrPaveles 2 года назад

Hi, does it do momentary switch as well?

@BaptismOverland 2 года назад

No. Just on and off lol

@MarioMartinez-is1cg 2 года назад

So you don’t need a relay that comes with the wiring harness correct?

@BaptismOverland 2 года назад

Nope! This kit IS your relay already.

@MarioMartinez-is1cg 2 года назад

@@BaptismOverland thank you 🤙

@boderick1 2 года назад

could space the box out with washers

@BaptismOverland Год назад

Yep. Exactly what I did. I actually found some metal tube spacers that worked great

@WeekendWarrior604 2 года назад

do you have an online shop for decals?

@BaptismOverland Год назад

I will soon!

@JonnyBgooD007 2 года назад

Where did you get the mount from?

@BaptismOverland 2 года назад

Comes with….

@ThomasTribeTrails Год назад

FYI Jeep owners:I purchased the control panel cable extension. I ended up not needing it in my 2016 Jeep JKU install.

@BaptismOverland Год назад

Awesome! I run the ApolloInTech in the Jeep and didn't need one there either. The distance fr the Jeep battery to the inside of the vehicle is very short compared to the runner. (I own a 2016 as well)

@adidas4275 3 года назад

umm, "who needs a welder" is not something you will be saying if you run challenging trails reguarly with a group of people. I have a Bun portable welder from Sue Bun on FB out of Sacramento and it is nice... but the alternator based welders are a nicer solution to weld on other people's rigs.... you cant weld on your own rig with that setup but still they are very nice. break a control arm mount, shock mount, putman arm, sector shaft, steering box bolts, steel tie rod.... plenty of other situations also..... broken spider gears in an open diff.... lincoln locker them for the trail and then fix it back at home ..... lots of situations

@BaptismOverland 3 года назад

THAT is awesome. That’s the answer I was looking for as I had never seen a rig with a welder on RU-vid. Thanks man!

@ifitsnotbrokenfixit1193 2 года назад

@@BaptismOverland paul from Fab Rats has a few on his rigs. he has a few videos on them. and them in use. they run off his Alt and has a throttle lock to keep his RPM's up..

@sergigahr 2 года назад

Does it have a Low Voltage Cut off?

@BaptismOverland 2 года назад

No it does not. What I DID though was add a 100 amp circuit breaker so if it shorts it'll cut the whole system. But as far as low voltage it doesn't. I'm sure if I get a dual battery setup though I'll use the low circuit cutoff fr that

@DennisWigmore 2 года назад

Welders used on trucks that work on pipelines

@americanmade422 11 месяцев назад

They have had issues. Lots of people i know are on their 2nd and even 3rd one. Possibly quality issue on the manufacture side.

@BaptismOverland 11 месяцев назад

I'm still on the 1st. Hopefully no issues going fwd

@joecipaninon6794 7 месяцев назад

I hope this is available here in 🇵🇭

@BaptismOverland 7 месяцев назад

Hmmm I'm sure it should be. If not there are tons of other options

@usmarinenapinoy 7 месяцев назад

Auxbeam or Nilight?

@BaptismOverland 7 месяцев назад

Auxbeam

@hj7993 2 года назад

How the auxiliaries positive wire is protected from the weather. The terminals are open to the weather.

@BaptismOverland 2 года назад

No it's covered. Which- a gripe I had- was that it's hard to remove the cover because it's butted up against the wall. On my Jeep I have the Appollointech and that one can be removed easily.

@hj7993 2 года назад

@@BaptismOverland I mean the side area where the wires are screwed in are not covered.

@BaptismOverland 2 года назад

@@hj7993 and that's what I mean...when the cover goes on, it is covered. It's not FULLY covered because obv the wires need to go out to...but covered enough. I think of it like this...even your battery terminals are fully exposed under the hood and many other components. It's been fine and we live in a hurricane prone area. Haven't had a problem. We've also taken it off road where the entire hood area was covered with mud. So I'm not super worried

@hj7993 2 года назад

@@BaptismOverland Thanks for the info. I may consider using dielectric at the terminal.

@BaptismOverland 2 года назад

@@hj7993 sounds like a good idea. Better safe than sorry!

@gregscherf9385 2 года назад

Jeremy on the bleeping Jeep channel who drives the chubby chaser has a welder installed in his Dash

@sar4x474 Год назад

Seems odd that they did not put a negative bus bar in the switch box. Would make it a lot cleaner when routing loomed wires from your devices.

@BaptismOverland Год назад

My thoughts exactly!! The one I have for the Jeep (ApolloIntech) has negative terminals :)

@colinarnold3726 Год назад

@@BaptismOverland The auxbeam 8 does do the pos & neg. Too bad it's not for the 6. Oh well.

@BaptismOverland Год назад

@@colinarnold3726 yep. I almost considered upgrading

@colinarnold3726 Год назад

@@BaptismOverland but hey, you got a freebie! I actually bought a Talon Cat cover from a guy and he goes "hey, want this new Auxbeam 6 gang?" Who am I to say no? So like you, I made it work. Thanks for the vid.

@modevans3569 2 года назад

Pipe welders and site workers

@jeremywhite779 2 года назад

Link for the switch doesn't work 🤔

@BaptismOverland 2 года назад

Sorry about that. I think they had sold out but they're back in stock. Try this one: www.amazon.com/Auxbeam-Universal-Circuit-Automatic-Dimmable/dp/B08RRV197G/ref=sr_1_2_sspa?crid=1Y9O4PYCEZYP5&dchild=1&keywords=auxbeam+switch+panel+6+gang&qid=1634582023&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExNEdHNEdZM1A2WDlJJmVuY3J5cHRlZElkPUEwNzMyODQwMjhIWVoyMk82UDJFNCZlbmNyeXB0ZWRBZElkPUEwNDIxNTI5MlNISjJPUlBUUTVWUyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

@dirtrascal171 Год назад

7:00 minutes right to install info 😎

@BaptismOverland Год назад

That's because I gotta do the unboxing and show the parts and what you get with the kit. My videos are comprehensive thus the time stamps so you can skip if you want

@truevinetoday1398 2 года назад

Dude you don't have a welder in your rig come on man!!😂✔️ that sounds awesome for real. I have not needed a welder on the trail yet. But I thought to myself I need one in my gladiator. I know I will down the road. Come on now about to check your channel out subscribing now we're a little bit behind you only 800 subscribers but we're working on it, I got to get back on the trail. Been too busy cutting logs on the sawmill Check us out if you get time thanks

@BaptismOverland Год назад

😂

@juicetin942 Год назад

No label for front parking sensors

@BaptismOverland Год назад

They can only fit so many lol. And although I'm sure many use a button for that, it's prob not as common

@h001139 2 года назад

Hyperlink for Amazon don't work

@BaptismOverland 2 года назад

Yeah they switched it recently. I'll update it but for now here ya go: www.amazon.com/dp/B08RRV197G

@leonsoto8333 Год назад

the only issue is ... the leads +- short AF

@BaptismOverland Год назад

Man listen lol. Especially if you're mounting it to a secondary battery in your trunk. You'll def have to extend

@TurboJThomas Год назад

DC welders are not crazy uncommon with the hardcore wheeling crowd.

@BaptismOverland Год назад

So I've learned lol

@StVick Месяц назад

Lol thats funny you didn’t know what a welding rig was. I know this was 2 years ago, you probably know what kind of truck it is now.

@BaptismOverland Месяц назад

Yeah haha I've been corrected many times. We live and we learn

@UncleT0ny 3 года назад

i watched this on mute - only because im on the phone wit my gf.. so you might've addressed this: but does this void your warranty?

@BaptismOverland 3 года назад

It’s not the kind of mod that should. Normally warranties are voided if you’re switching out parts that alter the ride or performance of a vehicle (suspension, brakes, engine, etc). I could be wrong but this is just an add on that if you wanted to, you could easily remove it and the ride quality hasn’t changed

@cobwill8181 Год назад

You’ve never seen a welding rig?

@BaptismOverland Год назад

I've been made aware many times now that people bring their welders off roading 😂

@speeddemonrr2600 2 года назад

Pipeline welders mount welders to their trucks

@jbivvy420 Год назад

Welders on off road wreckers

@officialWWM 2 года назад

You talk too much. But I’m going to subscribe anyway.

@BaptismOverland 2 года назад

I actually did a video on exactly that. Go watch it.

@juniorbriseno 8 месяцев назад

Talk too much

@BaptismOverland 8 месяцев назад

Type too much

@arieorange 2 месяца назад

One time we go off roading in a deep into a jungle remote area in Indonesia, and one of our team member car got broken axle, at that time, one of the team pull out the welder kit and start repairing the broken axle, so yeah, sometimes there are welder playing the part hehe

@BaptismOverland 2 месяца назад

Wow. That's pretty amazing. In the Philippines they do the same type of things as well.

@arieorange 2 месяца назад

@@BaptismOverland awesome bro!! Anyway thanks for the review, i just bought that panel today, can’t wait to install it in my MU X