Тёмный

Avoid MAJOR Plumbing Issue When Installing Kitchen Sink! 

That Fix It Guy
Подписаться 90 тыс.
Просмотров 82 тыс.
50% 1

Avoid MAJOR Plumbing Issue When Installing Kitchen Sink! Sink drain is too high for kitchen sink plumbing pipe to connect the p trap on a new kitchen remodel. Taking measurements will save you. Subscribe here : / @thatfixitguy
Milwaukee Hole Hawg Link:amzn.to/2x2KIFm
Milwaukee switch blade kit link: amzn.to/34UrkGW
Reed pipe cutter link: amzn.to/2VthRDz
Ryobi Contractor Kit link: amzn.to/2XWdse0
Pittsburgh screwdriver link: amzn.to/2y61nrL
ABS Glue link: amzn.to/3cge41X
Stanley Tape Measure link: amzn.to/3auX9aC
Mechanix Gloves link: amzn.to/2VMxB3m
(Amazon Affiliate links)
DISCLAIMER: This fix is not building code compliant in some areas. Not recommended to drill into king stud. My friend wanted this done to avoid a massive cost addition on the project. Talk with local authority having jurisdiction if your not sure.
Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
(creativecommons.org/licenses/...)
Artist: audionautix.com/

Развлечения

Опубликовано:

 

21 апр 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 79   
@ThatFixItGuy
@ThatFixItGuy 3 года назад
DISCLAIMER: This fix is not building code compliant in some areas. Not recommended to drill into king stud. My friend wanted this done to avoid a massive cost addition on the project. Talk with local authority having jurisdiction if your not sure. Please leave your nasty comments here!!
@Southpaw07
@Southpaw07 2 года назад
Awesome tip and saved me a lot of rework. Happy found this video as i am about to install an undermount sink TY!
@ThatFixItGuy
@ThatFixItGuy 2 года назад
Your welcome! It is always good to check that height.
@Broxty
@Broxty 3 года назад
Man..... Before my drywall guys came I was curious about my drain height! You saved me a big fix! Thanks brother.
@ThatFixItGuy
@ThatFixItGuy 3 года назад
Glad that this helped! I have seen it too many times. Hope we can help again.
@susanseymour641
@susanseymour641 4 года назад
Thanks for the tips Brian! Calling a plumber for that job! Janae is right - you make it look easy!
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Right tools go along way for an easy job.
@brittblanton8342
@brittblanton8342 4 года назад
Wow neat job Brian you make it look so easy. That bad boy drill would break an arm.👍
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Thank you. It would break an arm for sure!
@StoneyRidgeFarmer
@StoneyRidgeFarmer 4 года назад
Good times!
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Thanks bro!
@stevesproul3744
@stevesproul3744 4 года назад
Great information brother
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Thank you. I’m trying to put the knowledge out there.
@pamelapeery4528
@pamelapeery4528 3 года назад
You’re great. Good attitude. Cute as hell! Look like you love your job. Thanks.
@ThatFixItGuy
@ThatFixItGuy 3 года назад
Thank you for making me blush and my wife jealous! I really enjoy doing RU-vid. It has been fun and helps me feed the family.
@pamelapeery4528
@pamelapeery4528 3 года назад
@@ThatFixItGuy Awesome! Keep on trucking humble man.
@Aglassact77
@Aglassact77 2 года назад
Thank you sir 👍
@ThatFixItGuy
@ThatFixItGuy 2 года назад
Your welcome! Thank you for watching.
@mcg6252
@mcg6252 Год назад
when you used the level was that level or some kind of inclination for the pipe?
@MrMarbles0Xecution
@MrMarbles0Xecution 3 года назад
Thanks
@ThatFixItGuy
@ThatFixItGuy 3 года назад
Your welcome. Thanks for watching.
@eloyreyna504
@eloyreyna504 4 года назад
Great Vid. I have a question: can I use a low inlet trap for a garbage disposal and cut the black pipe from disposal? The wall drain height is 17 1/2 O.C and the new single bowl sink is 10” deep (undermount) dishwasher is gonna be connected to disposal. Thanks.
@ThatFixItGuy
@ThatFixItGuy 4 года назад
You could be ok as long as the drain line coming out of the wall is lower than the disposal discharge. If not you will want to cut and lower the drain in the wall.
@eloyreyna504
@eloyreyna504 4 года назад
Thank you so much.
@jgardner4033
@jgardner4033 4 года назад
You make the job look easy. How long did it take you?
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Thank you for watching. It took about 1 1/2-2 hours.
@buckk9414
@buckk9414 4 года назад
Feels good to take copper out. No worries on leaks when that gone.
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Yeah that will be good for along time. Those Johnson Tees are a joke. Problem waiting to happen.
@Rico702Vegas
@Rico702Vegas 3 года назад
Horrible grammar, you have. (like Yoda... and this idiot in the video)
@ThatFixItGuy
@ThatFixItGuy 3 года назад
Thanks for watching! I really hope the video helped! Please subscribe, we would love to have you keep coming back.
@hedonisthobbyist707
@hedonisthobbyist707 3 года назад
Hello, Does the new drain pipe rest level, or does it have some fall towards the exit end?
@ThatFixItGuy
@ThatFixItGuy 3 года назад
It has slope. 1/4 in per foot.
@flowerchild496
@flowerchild496 Год назад
Light materials but works very well
@michaelgervasoni8009
@michaelgervasoni8009 2 года назад
Sorry but what happens at 4:55 on the top part of the pipe to be able to connect the two pipes together? Looks like some sort of sleeve or threading?
@ThatFixItGuy
@ThatFixItGuy 2 года назад
it is a no hub coupling. It is a rubber gasket that then has a metal sleeve with two worm clamps on it that secures both sides together.
@ranger178
@ranger178 2 года назад
i have an old hole hawg and one day it stopped working the motor came on and drill bit wouldn't spin the shaft actually sheared off inside the drill so guy at repair shop called Milwaukee and they said they would cover the repair because it was a bad batch of main drive shafts it happened to a lot of people's drills even though it was not under warranty
@ThatFixItGuy
@ThatFixItGuy 2 года назад
Wow that is awesome! You still got that thing in service?
@ranger178
@ranger178 2 года назад
@@ThatFixItGuy yes i still have it don't use it that often just big holes i am always using my dewalt cordless drills
@robertochavez6221
@robertochavez6221 Год назад
What’s the code for sink drain off the floor?
@ranger178
@ranger178 2 года назад
you put a rubber clamp on coupling on the vent line don't they have abs slip on couplings you could just glue in? we use pvc around here seems abs is popular on west coast for earthquakes probably
@ThatFixItGuy
@ThatFixItGuy 2 года назад
Abs does not shatter like pvc can is the reason I guess. But I think they make soft core pvc as well. I don’t really know what I just know they do. I had no play on that top pipe that is why I had to use a no hub. Makes the repair easier. I have not see a slip abs coupling. How would that work being glued?
@regularguy9264
@regularguy9264 3 года назад
I don't believe that you are allowed to drill through a king stud on a load bearing wall. You could go up to about 2" hole if you double up framing studs on load bearing walls. Maybe your building code is different, but feel free to let me know if I am wrong. Thanks!
@regularguy9264
@regularguy9264 3 года назад
Just to clarify, I often see the trap arm running through cabinets due to this issue.....admittedly very ugly though and homeowners don't like it. My guess is that with the shear reinforcement of the plywood and being on the second floor only supporting the roof, the structural would never become an issue. Just don't know that code allows for it.
@ThatFixItGuy
@ThatFixItGuy 3 года назад
No are correct that you should not notch out or drill the king stud, totally against code. It was a situation that would have cost an arm and leg to do any other way. With crawl space constraints or king stud replacement they were into the realm of crazy money to make a proper code approved repair. repair. Thought about bringing out the wall and notching the cabinet, but the dishwasher gies in that space and was not going to fit properly if the pipe got 45ed out. I did not want to get into that on a video, but looking back I should have. I am going to take the video down. I don't want people learning wrong things from me. I really love doing this and am not in the habit of bad practices.
@regularguy9264
@regularguy9264 3 года назад
I'd rather you leave it up and add a caveat. There's not much content on RU-vid for this type of issue. I think that Simpson makes a stud shoe to reinforce a notched stud, but don't know if it can be used for a King stud.....might be another option
@ThatFixItGuy
@ThatFixItGuy 3 года назад
Sounds Good. I have not seen a stud shoe for a king stud. I am searching for other options. Have reached out to a few people. I will write a disclaimer comment and pin it. There is already a disclaimer in the description box of the video. I'm trying to help not hinder! Thank you
@bkoz319
@bkoz319 3 года назад
you need to use a long turn 90 or (2) 45's under the sink. You used a 90 Ell which is against code.....very hard to snake the drain the way you did it... that why its the code
@ThatFixItGuy
@ThatFixItGuy 3 года назад
WA state UPC that is not a code violation. I can see where it might be nice to put a long sweep in there for snaking purpose, but I have never seen a long sweep installed there. Thank you for watching.
@dannyalvarado3067
@dannyalvarado3067 Год назад
​@@ThatFixItGuy horizontal to horizontal you should put a long 90
@irvinwaters3162
@irvinwaters3162 4 года назад
Can you do changing a bedroom door handle video?
@ThatFixItGuy
@ThatFixItGuy 4 года назад
I can do that for sure. Thank you for watching!
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Hey Irvin I just released a door knob replacement video today for you! Thank you for the suggestion and thanks again for watching!
@irvinwaters3162
@irvinwaters3162 4 года назад
That Fix It Guy thanks
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Happy to help!
@dutchside33
@dutchside33 3 года назад
Is that an exterior wall
@ThatFixItGuy
@ThatFixItGuy 3 года назад
It is on a exterior wall right below a window for the kitchen.
@jonathanklopf7581
@jonathanklopf7581 6 месяцев назад
not a terrible job, I do hope you deburred inside pipe after using pipe cutter to cut pipe, there will be a ridge left inside pipe after cutting.
@irvinwaters3162
@irvinwaters3162 4 года назад
I meant bedroom door knob
@ThatFixItGuy
@ThatFixItGuy 4 года назад
I can do that.
@21gonza21
@21gonza21 3 года назад
drilling thru those 2x4 like that will weaken your structure
@ThatFixItGuy
@ThatFixItGuy 3 года назад
How do you put the pipe in the walls if you don't drill out the 2x4? I would love to know your method.
@21gonza21
@21gonza21 3 года назад
Just have your pipe come up from the floor
@ThatFixItGuy
@ThatFixItGuy 3 года назад
You can do that, but you still have vent pipe that needs to be ran in the walls. You don't want a piece of two inch pipe just hanging out there exposed.
@timdouglass4934
@timdouglass4934 3 года назад
As a builder I agree that installing a 2" line thru a 2x4 stud doesn't leave much of the stud left but their isn't any alternative. Your right about the hole hawg, when it binds up and it will you'll come out on the losing end every time and I don't care you are. Good straight to the point well made video. My brother gave me some good advice. He said when using a pistol grip type 1/2" drill motor with a hole saw , grip it in your left hand. He said when it binds up the drill motor will come out of your hand naturally without torguing your wrist.
@ThatFixItGuy
@ThatFixItGuy 3 года назад
That is great advice from your brother! I will keep the left hand trick in mind. Thank you for your input in this. It is the way I was taught to install the pipe. Much better than notching it out.
@tribalism_is_toxic1989
@tribalism_is_toxic1989 2 года назад
Isn't it called a right angle drill??
@ThatFixItGuy
@ThatFixItGuy 2 года назад
It technically is a right angle drill, but made with a bit more of a purpose super beefed up version.
@billedgecombe9040
@billedgecombe9040 4 года назад
that drill will break limbs
@ThatFixItGuy
@ThatFixItGuy 4 года назад
Yeah it is crazy. I have a couple stories when I review it.
@ee7966
@ee7966 3 года назад
U screwed the handle in the wrong side
@ThatFixItGuy
@ThatFixItGuy 3 года назад
Which handle?
@ee7966
@ee7966 3 года назад
Holehog handle
@ThatFixItGuy
@ThatFixItGuy 3 года назад
That is the lovely part about that tool is the handle can go on either side. Thanks for watching.
Далее
How to Plumb Kitchen Sink Water Lines
14:15
Просмотров 250 тыс.
How to Drain and Vent a Kitchen | This Old House
4:12
Просмотров 273 тыс.
How To Connect a Kitchen Sink Drain - 2023
9:19
Просмотров 809 тыс.
TIPS for Rough Plumbing a Sink 🔨💧🪚
14:01
Просмотров 54 тыс.
How to Move a Kitchen Sink
7:23
Просмотров 32 тыс.
HOW TO PLUMB A KITCHEN SINK THE EASIEST WAY
22:16
Просмотров 243 тыс.
Kitchen Makeover + PLUMBING ON CONCRETE (Ep.2)
18:52
Просмотров 308 тыс.
How to Correctly Rough-In PEX (STUB OUT)
4:07
Просмотров 56 тыс.
БАТЯ И ТЁЩА😂#shorts
0:58
Просмотров 6 млн
Ревнивый песик😁
0:30
Просмотров 2,5 млн