AWD Miata Sits On Its Own SUSPENSION FOR THE FIRST TIME!

Подписаться 698 тыс.

Просмотров 96 тыс.

50% 1

Today we finish the tube chassis, make a trans mount, and a strut tower brace, and set the car on its own suspension for the FIRST TIME!
CarMarshal ►
Patreon ► / gingium
OTHER VIDS!!
Drift Truck ► • Building THE ULTIMATE ...
Adventure Bus ► • College Dropout Conver...
Rally Miata ► • Building a Supercharge...
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
AWESOME Welders & Supplies ► www.usaweld.co...

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 721

@Sbinott0 4 года назад

Build a stretched miata front, it's a rally Miata, so it should stay a miata

@francoocchipinti9842 4 года назад

Please, kinda like Rob DAMN did in his RX-7

@AlexPagliro 4 года назад

Franco Occhipinti exactly what I was thinking rob damn did it and it looks amazing

@Megawaffle55 4 года назад

Yea but whose build is it?

@boldoglazar369 4 года назад

Rob dahm changed the wheel base lenght which has a functional purpose, stretching the front in this case would look garbage

@Sbinott0 4 года назад

@@boldoglazar369 the front is already stretched, since the lower part of the bumper was cut in the rally miata and the wheel arches are going to be widened and cut I think it'll look awesome

@gavinmeyer8937 4 года назад

Ginguim: *buys cutting oil* "im never gonna use wd40 again gingium at 9:24: *uses wd40 again* Also def put miata panels back on but do a wrx hood scoop

@gerritkipkerrit5999 4 года назад

Best idea in this comment section

@Leotheleprachaun 4 года назад

Gingium: Opens bottle of cutting oil and immediately dislikes it and went back to wd40 in the same video

@nungal573 4 года назад

Gavin Meyer why not use the old hood from rally Miata when it’s still green, it still has a big hood scoop, probably to big for this version but it’s easier, just bolt it and that it

@most_909 4 года назад

Look sick! Just one thing: Please never operate a drillpress, or anything thats spinning rapidly, with gloves. Might end pretty bad for you.

@redsquirrelftw 4 года назад

Yeah that's a good point, with gloves it has a bigger chance of pulling you in, without gloves you can still get cut/hurt if not careful but there is less chance of it actually pulling your hand in. Also once in a while it's good to take a step back and ask yourself if you are doing everything safely, as it's easy to get complacent.

@bingbong5939 4 года назад

I’ve seen a guy broke every bones in his hands on a press drill because of his gloves

@dougsfan9984 4 года назад

YES!!!!

@Freehand59 4 года назад

I had the same thought. Would suck if we got an update that he had MA gled his hand or something.

@reiniervanzwieten7092 4 года назад

Just like the comment so fabium sees it i guess. looking our for ya boys safety

@wouterh5729 4 года назад

I think miata body panels would be amazing, its the rally MIATA after all

@timothyatkinson7204 4 года назад

I think Miata panels with the bar-work and strut towers sticking through would look cool, but a trophy truck style Miata front end would also be cool Either way this thing will be awesome, we're all proud of you Gingium!

@rex_s80 4 года назад

Timothy Atkinson i like the idea of the bar work sticking out of the Miata panels as well

@tom3056 4 года назад

stretch the mx5 body panels and add a wrx bonnet scoop!

@sashawaxman807 4 года назад

I just love the idea of a Miata with chassis bars sticking out of it on top

@alexo4600 4 года назад

i was literally about to suggest just that 100% agree

@rex_s80 4 года назад

Yeah that’s what I said on the last video. I agree ☝️

@DingDongDaily 4 года назад

oh and cap those tube ends in the front.

@_Anthony___ 4 года назад

Not yet

@ryanhodgkin7475 4 года назад

After the bash bar has been built itll be closed off

@Da_Canadian_man 4 года назад

No fill it with chlorine pellets so he can milk 7 episodes from it in a couple years

@TheNachito258 4 года назад

I think you should put a beefier trans mount...

@Joebroni1957 4 года назад

And get rid of the hiem joints

@Dhigzzz 4 года назад

Agreed

@Wmoore1 4 года назад

Yah definitely caught me off guard with those heim joints on the trans mount.

@bazza108 4 года назад

I was surprised to see that format used but I ain’t mad at it, maybe a piece of thick rubber for vibration dampening but all in all I like the heim concept

@TheNachito258 4 года назад

@@bazza108 the concept is unique, but I think it should be beefier...

@stans5270 4 года назад

I just Googled "What could go wrong" and it brought me here.

@AimlessMoto 4 года назад

You need a stronger trans crossmember... that heavy-wall tubing is going to bend VERY easily.

@mikeythanos 4 года назад

One of the most badass projects on RU-vid that has never been tackled.

@josevasconcelosligeiro9471 4 года назад

Have you seen project binky? Makes this look like super simple 😂

@SeaNaCl 4 года назад

Rob Dahms rx7 will forever be number one in my heart

@GrandCaravanSE 4 года назад

I don’t feel like that transmission support is substantial enough. I would at least want two mounting points to the chassis for redundancy. Especially for what you will be using it for.

@zippyoya 4 года назад

Update log 1/9/2020 Rally Miata -front tubes are almost done -mounted mostly all the engine stuff -added strut braise Other -set shop towel on fire lmao

@fit1n 4 года назад

strut brace, but otherwise good :^)

@zippyoya 4 года назад

FitinFroog thx man :)

@LoneRevD 4 года назад

-set shop towel on fire lmao 🤷‍♂️🤣🤣

@charlieworsfold2661 4 года назад

needs miata panels to keep it as the rally miata

@rex_s80 4 года назад

Charlie Worsfold yeah I agree. Even if it means having the tube parts sticking out of the panels which would look kinda cool imo. Very mad max

@riccardo1796 4 года назад

"structurally" you're gonna need some triangulation, my dude

@LMDF2000 4 года назад

and gussets, gussets ftw!

@TheGalifrey 4 года назад

Haha I just posted the same thing lol

@Gixxer2247 4 года назад

Im a mechanical engineer, I can attest to more triangles

@zerohourdrift 4 года назад

carlos bean dude me too! And I also drive a 4th gen f-body... though mines a firebird😂

@Nicktheblasian 4 года назад

I just wanna see working pop ups on this thing 😂

@thijsbrouwer8722 4 года назад

I must say that was soooo fast already on its own weight

@wowthtsgood 4 года назад

Only add bars where needed. Adding bars to look cool is just unnecessary weight. This is the coolest build on youtube right now!

@tylerckapp 4 года назад

can we appreciate that caleb is one of the few youtubers that made a promise on a project forever ago and ACTUALLY KEPT IT? this dude is crazy. congrats dude you deserve this.

@Chrisisbiking 4 года назад

Just make it like a pre runner only its a miata so pre jogger 😂😂

@Ac3sdg 4 года назад

never thought i'd see a carolina squatting miata

@Samuellapointe09 4 года назад

ahhaha

@christopherpiper7926 4 года назад

Alex Marczuk please no

@francoocchipinti9842 4 года назад

He should leave it like that

@Natschke_Family_Adventures 4 года назад

@@francoocchipinti9842 Hell no!

@eel1331 4 года назад

Those spherical ends for the trans mount is going to allow it to pivot forwards and backwards, changing the pitch. Just weld the spherical bearing

@ProMotoo 4 года назад

Please put the miata panels back on. Then just precisely cut out in the top for the bar work so it sticks out of the top. I think it would look sick!

@jacobskaalen9794 4 года назад

Pasha editing lvl 1000

@802Garage 4 года назад

Right? Love it.

@tannerhobbie2497 4 года назад

The time lapses and loud music every video can get boring. Not that I can edit.

@802Garage 4 года назад

@@tannerhobbie2497 I just love the memes. The overall quality is good too.

@JustPasha 4 года назад

Aw, stop it 😘

@jacobskaalen9794 4 года назад

@@JustPasha keep up the awesome work 😄

@theman3343 4 года назад

that pitch mount connected to the sway bar is absolutely going to snap.

@CasketLife 4 года назад

You think so? Its really custom now lol

@tristan8243 4 года назад

the big space behind the engine looks so funny edit: could build a *frunk* ginge ;)

@c4mp3rd4n 4 года назад

That bottom trans mount isn’t beefy enough. Those joints aren’t supposed to support weight in that way. Keep pushing though dude your doing well 👍🏼

@HeadBubbel 4 года назад

At tha moment your content is the best on RU-vid for me ! Seeing forward to every upload ! Regards from Germany ! 🤘🏼

@RantzCore 4 года назад

Just curious when you'll start to plan out the skid plate? You're killing it as always Caleb! I am so glad I subscribed to your channel and joined your patreon. One of these days I will have to come out and say hi when it warms up. Until then... Best wishes and Peace out brother!

@alexgherghiceanu2094 4 года назад

To think this channel started with forza budget builds and now to this is amazing

@josephsamsor1698 4 года назад

Alex Gherghiceanu in an extremely short amount of time too

@Cole.Van. 4 года назад

In love with this. Couple thoughts: coil overs for wider meats in the front, headers that tuck up higher for a sweet skid plate. Sure you’ve already thought if it.

@aBROhamLincoln42069 4 года назад

Something that’s always overlooked that can help so much is a fire extinguisher. Make sure you have some that are near by always

@oskarstaudte 4 года назад

As soon as these go up, I instantly watch. Love it man keep it up

@pietroghedini98 4 года назад

This new early video perk for patreon is great, I had to subscribe 😅

@chillgates9892 4 года назад

Love how he's wearing evan shanks merch, i guess you want that evo

@mxp7443 4 года назад

I am so happy and excited at the same time... This is the most unique build on youtube! Just asking myself which fenders and all of that he is going to install, I mean those are way different measurements.

@jacobskaalen9794 4 года назад

F-150 fenders?

@mxp7443 4 года назад

@@jacobskaalen9794 Nah wont look good on it :D

@RantzCore 4 года назад

I wonder who wants to see Caleb hammer the Miata fenders into custom fenders with a wide body stance?

@mxp7443 4 года назад

@@RantzCore well no one I think. Its a rally car not a show car or drift car.

@RantzCore 4 года назад

@@mxp7443 - only reason I say this is because whatever fenders he would put on would give it a wide stance. Show car or not we all know Caleb wants it to look good. Do you think he should re-use the nose?

@SleeveOfWizzard 4 года назад

There is SO much room between the engine & firewall!

@thatgingar8765 4 года назад

keep it looking like a miata put the miata body panels back on

@johnnychun9728 4 года назад

make a bash bar for the miata and skid plates. for rock/car/water protection :D

@benm.8461 4 года назад

Your shop really needs actually rags with a sealed garbage container to put dirty ones in. It’s a really big safety thing that can prevent oil fires and keeps a shop looking cleaner

@GrannygearKiller 4 года назад

Pretty sure that trans mount isn’t quite strong enough for off-roading. Maybe that’s just me though

@fastbicyclerider7300 4 года назад

GrannygearKiller no it’s a not strong

@jakeadams1423 4 года назад

Greatest build on RU-vid right now. Change my mind

@thomassmith2239 4 года назад

Impressive! I thought you were crazy and I'm still curious if all that motor will fit behind a Miata nose but for what I've seen sofar I love it!!! Keep going!!!

@thesyndiactefanboy7776 4 года назад

Bro you going from video games to doing this is honestly just inspiring.

@ismet_sxv 4 года назад

*Camera man Pasha is awesome 🔥 his footage is lit af*

@ilyayemets4517 4 года назад

Make custom Miata fenders!!! Sculpt with either clay or spray-foam, then make a fiberglass mold for it, then the actual fenders. Make it a Baja wide Miata.

@sc1837 4 года назад

This is a truly amazing series.... This is what RU-vid is made for

@LouisSubearth 4 года назад

"I don't remember what I filmed yesterday, 🐬🐬🐬🐬, REEEEEEE" -Gingium, 2020, probably

@Hauuy-el1vv 4 года назад

Editing was outstanding 👍🏻👍🏻👍🏻 well done boys

@WillJow99 4 года назад

Miata front end! Looks sick the way you’ve already done it!

@charliehelfand969 4 года назад

Gingium: *Takes Rally Miata to a rally event* Rally Miata: *Fails tech*

@johnathandoe5357 4 года назад

Charlie Helfand I meannnn yeah could happen

@Nst25Todd 4 года назад

By far the best build on RU-vid!!! A pinnacle build for my favorite channel. I hope many subs are to come because it’s well deserved. You’ve Came along way since I started watching in the home garage talking about this build. As usual I’m eagerly waiting more vids.

@harryfp1494 4 года назад

Gingi your a beast man you don’t build for sema you build for your smile and ours . That’s a dope heart you have bro

@ceesvandop5297 4 года назад

It's amazing to see how far fabium has come

@ELLeeOh 4 года назад

You have to put fenders back on it Tube front end looks cool in all but not so much for on road driving The Miata fenders cut at the beginning of the radius stretched up to fit over the bars would make it look finished just my two cents Two thumbs up from this guy

@j3blanton8 4 года назад

This build has gone by fast (at least for me) and you’ve put in a lot of work. Can’t wait to see the final product!

@alejandroramos5917 4 года назад

You should add some more bars to the back, and make more solid. Like a trophy truck set uo

@n1ccerouswinters704 4 года назад

You are killing this re camp of the Miata love the show can’t wait to see more !

@ELDELACHEVY93 4 года назад

You should use the paint hoonigans used on the merch van!!!! To stop and prevent rust!!!!

@BobbykahrLP 4 года назад

I really wish u would put some link to the music u use in your videos, u always use the best cinematic songs, its awesome to watch and just relax. Thumbs up for u and Pasha! Rallyata looks sick!

@Carnerd101 4 года назад

Watching you create awesome things from nothing is enjoyable.

@nicksaj1797 4 года назад

Easily the coolest build ive seen on youtube i look forward to seeing the new progress videos!

@tylerwilson5425 4 года назад

Loving these new edits and the miata

@sgsax 4 года назад

Really impressive work so far. I'm still completely undecided about how I feel about it. Withholding judgement until I see the finished product. Thanks for sharing!

@thelonewanderer420 4 года назад

I think a trophy truck front end with the pop ups and the big mouth would be pretty cool

@Kirkov36 4 года назад

I have been watching you since your Forza 6 drag videos. I'm genuinely so happy for you. Congrats and keep on making sick projects!

@tylerliversuch7081 4 года назад

Such a unique build. I'd love to see the rally miata next to the rally Porsche

@Voskaridis 4 года назад

I love this build!!! Cant wait to see it in action!!! You are becoming a grear mechanic and youtuber Caleb keep pushing!

@radstayathomedad9178 4 года назад

Caleb, I’ve been watching your channel for a while now and I have to say you’ve become quite the fabricator. I remember some of your first welding projects with the booger welds. You’ve come a long way. Also, the Rally Miata should have a Miata front end IMO

@nickfury1279 4 года назад

This thing is starting to look badass

@dominickstrohmayer541 4 года назад

I like seeing the real raw uncut Gingium

@real_Fabiot 4 года назад

Your uploads are so frequent right now , it's awesome !

@SonyFoLife 4 года назад

Why did you use heim joints for the strut tower brace?

@HoustonKilby 4 года назад

Tubing work is looking man ! I know when I was bending out my chassis it was a blast seeing it come together. Nothing like bending some chromemoly 😎🏁🦅🤝

@micahcarss790 4 года назад

Been watching your chanel since it was just gaming videos, before you had the miata. Crazy how much stuff you do now. Good job.

@your_fbi_agent311 4 года назад

Went from a SUPERCHARGED Miata to a Subaro chases swapped Miata. Love the idea of using a Subaru chases for it with exposed chases bars.💥🚘

@LFSDataBase 4 года назад

try fit miata panels. youre planning to off road this alot.. leaving as it sits now (tube front) will make the engine alot more dirty i think

@Cherry945t 4 года назад

By far the best content on RU-vid keep up the good work Gingium

@jorgec5335 4 года назад

keep the old miata front

@xxkillervibezxx1919 4 года назад

You should definitely do miata panels with a Subaru scoop on the hood, also POP UPS!

@onniolawale 4 года назад

This project is just awesome! Can't wait to see more.

@631BikelifeBMX 4 года назад

Why doesn’t gingium have a million subs yet?

@Justindrifts 4 года назад

Highly suggest spl arms for the rear uppers for camber adjustment when lifting. They can do custom applications for shorter or longer Heims.

@big50calgaming92 4 года назад

You’ve gone from tiny videos to these builds man, take a step back and see how far you’ve come, can’t wait to see this thing ripping dirt apart🤘🏼

@corkydryden6022 4 года назад

Ive been watching this channel for a few years now and this build has me more excited than any other

@greenmountainsuriving 4 года назад

Best Mazda Miata build On youtube EVER ty from Vermont

@ludicrousfilms635 4 года назад

I feel like that trans mount will just twist with those heim joints. Why didn't you just make it solid without those heim joint/spherical bearing mounts?

@benson4u215 4 года назад

Heim joints*

@ludicrousfilms635 4 года назад

@@benson4u215 ahh that's the word! Thanks haha!

@1BadRAMLimited 4 года назад

Look at you fabricating like a boos ging! Way to freaking go bro keep up the hustle man!

@southerntiessxs1515 4 года назад

You gonna regret not wearing safety glasses when you get some metal in your eye... just sayin bro it ain’t fun had a buddy almost lose vision in his eye over it.

@Pheatan 4 года назад

Especially when you can get decent enough glasses for like $8. Had an angle grinder blade blow up on me about a month ago and besides bruising around my eye from the force of the piece hitting the glasses i was completely fine

@oof578 4 года назад

My safety squints didnt protect mine

@tailorlanam4359 4 года назад

Aye man I'm really liking the new video format. It looks so much more professional and overall better. Keep it up cant wait for the rally miata to be finished. 😘

@VectorNinja1 4 года назад

This fab work is soooooo freaking cool and seeing it all get done step by step is dope I love this channel big brainium with the tube chasis geometry

@RileysMotoGarage 4 года назад

Loving the car channel support shown when you where even shanks five three sweater ✌

@Darthadios 4 года назад

Put the Mazda front fenders, bonnet and the bumper to it. Also I saw a Volvo for sale which was failed on MOT because of customization, like the springs were too short, one silencer and catalytic converter were missing from the exhaust, and because of that it was too loud and failed on emissions. Also the bonnet had too much cuts.

@erloisaaks105 4 года назад

I could watch this channel all day everyday

@brandongrant1107 4 года назад

I had to become a patron for this XD

@yannickbreunesse327 4 года назад

At 12:41 in the back you can see what made me go to this channel. Donut media babyyy. LIGHTNING LIGHTNING LIGHTNING

@simondaberooni6483 4 года назад

thanking for not making clickbait content

@_Anthony___ 4 года назад

With it being a custom front end frame. You could have anything in the front. 4runner bumper, wrx, legacy etc

@mattsee45 4 года назад

When’s the Datsun coming back?

@Natschke_Family_Adventures 4 года назад

February 31st.

@t7vrxn 4 года назад

@@Natschke_Family_Adventures how tf do u know bruh

@Alex-qs2hm 4 года назад

teezy lol dawg you slow

@Da_Canadian_man 4 года назад

NATSCHKE FAMILY ADVENTURES that is a long ways away I think there will have to be an extinction level event on par with what happened 65 million years ago to cause that to happen it would have to prolong a year by destabilizing the orbit for what equates to 2 or 3 days