AX15 Rebuild Part 1 | Project Rowdy Ep002

Подписаться 38 тыс.

Просмотров 92 тыс.

50% 1

Part 1 of the AX15 rebuild Video will cover opening the case and removing all of the internal parts so that they can be inspected and all of the proper parts can be obtained.
Products used:
Red Line MT-90 GL-4 Gear Oil - amzn.to/2xbGw1H
AX15 Service Manual: bit.ly/AX15Ser...
AX15 Master Rbld Kit: amzn.to/2hj3AF1
Reverse Idler Gear: amzn.to/2z0594i
Reverse Gear: amzn.to/2zXeqbg
5th Gear Upgrade: amzn.to/2ycaEO6
Red Line MT-90 Oil: amzn.to/2zW6eIq
Project Rowdy is a restoration on a 1979 Jeep CJ7. Prior to installation into this Jeep, the transmission is being rebuilt to improve its usefulness.
Project Rowdy Playlist:
• Project Rowdy - Jeep R...
UCanDoIt2 Website: www.ucandoit2.c...
UCanDoIt2 Contact: UCanDoIt2Mike@gmail.com
JeepForum Thread:
www.jeepforum.c...
Facebook Page:
/ projectrowdy
#Transmission #transmissionrepair #ax15transmission

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@TheYotamaster 6 лет назад

Hey I want to say thank you for your videos on the AX15 rebuild saved my butt in a couple spots forgot which way this or that went back together. Followed your steps just took the XJ for a test drive yesterday and everything works great!! Pretty stoked so many parts all working together. FYI I used the angle syncro rings on 4th gear the ones that came with the kit, they work fine. Keep up the good work!!

@UCanDoIt2Mike 6 лет назад

This makes me smile!!!!! Thanks for the feedback. It's a great felling of accomplishment to tear into it and then get it back working again!!!!!!! Plus you get to figure out how this crazy thing works!!!! Awesome!

@MileytheJeepV2 2 года назад

Glad to hear you were able to rebuild your transmission.. Mind if i ask how long that took? Pretty sure My xj needs synchronizers and a reverse gear and im just wondering

@UCanDoIt2Mike 2 года назад

@@MileytheJeepV2 Video taping and lighting makes it take 3x as long.... But if it was my first time with out all of that, but still taking my time with the instructions and learning what I was doing... I believe it would take me 4-5 hours. Now that I have done one, it would only take me 2-3 hours. Those are just modest numbers. Give yourself time for finding an unexpected part that you need to replace/order. Cheers! Mike

@MileytheJeepV2 2 года назад

@@UCanDoIt2Mike thanks for the info man.. Really appreciate these videos im sure i wouldnt be able to handle this without some type of reference

@jackcooper4889 2 года назад

@@MileytheJeepV2 Hey, it took about a month. But if I had worked on it every day probably a week or so. My input shaft bearing was toast causing it to pop out of 1st gear. My reverse gear was a little chewed up. I found a kit on EBay that worked great. Be real careful removing the snap rings. I messed one up what a pita that was to find a replacement. Take your time lots of zip lock bags and tables. Keep everything in order as you remove it. I found a manual online that shows the tear down and reassembly. Good luck

@Mark622111 Год назад

Big Fat Thank You....followed your videos step by step during my AX15 rebuild. Rebuild came out just fine considering your very involved step by step videos....Thanks again. Could not have done it without you... As for marking the parts as they came out, I used sandwich bags & a paint pen marking each bag to the repair manual page #. Helped me alot during the reinstall.... As for my AX15, front main bearing was toast but went ahead with a full rebuild...could not be happier. Repair manuals are great but we need guys/girls to walk us through the visual steps via their videos.

@UCanDoIt2Mike Год назад

Love it! Congrats on tackling it and I can sense that you have great confidence in the outcome. Many thanks for the feedback! Mike

@Mark622111 Год назад

AX15 back in my restored 97 Jeep Wrangler, 4.0L...shifts smooth as silk. Before, front bearing shot (you should see the photo), sounded as if it was going to come apart in 5th. I'm just amazed out how a $400 rebuild kit, my attention to details, and your videos saved my ass..... I'm a confident engine builder. 4.7 Stroker in my 97 Wrangler....this was my first transmission rebuild. Thanks for the new skill sets....

@UCanDoIt2Mike Год назад

Love it! Congrats on tackling the Trans and having that new skillset! Cheers.... Mike

@miguelguerrero6035 5 месяцев назад

Thanks for the video made my whole day alot easier

@UCanDoIt2Mike 5 месяцев назад

Love it! That is the whole point in sharing... Have fun with yours... Mike

@willhowell8705 6 лет назад

Thanks so much for making this rebuild video. It's way better than the one I rented on Vimeo. Saved me a lot of money and frustration. Great job!!

@UCanDoIt2Mike 6 лет назад

Will Howell Thanks so much for the feedback. Glad it helped you. The primary reason to share it. Really good stuff. It is a great feeling to know it is helpful.

@stevejppcar6208 7 лет назад

I have the same build on my 79 CJ7. I have a complete power train from Novak that includes 5.3, AX15 and Dana 300. I originally had 3.54 gearing with 32" MTR tires. With the ax15 5th gear at .79 ratio I did not have enough gear. In October I just upgraded my gears to 4.10 with Detroit TruTrac and 1 Piece Axles . All I have to say my jeep now runs incredible. I have all the gearing I need. At 65 MPH I am around 2275 RPMs.

@UCanDoIt2Mike 7 лет назад

Steve.... You are the man! I didn't have a reference to compare to but since that is the same configuration, you have provided me the proof that I will need to change my gearing. I greatly appreciate this information and will plan accordingly! THANK YOU SIR!!!!

@TravisBishop-sg6yp 3 месяца назад

Amazing video and great job

@UCanDoIt2Mike 3 месяца назад

Glad you enjoyed it. Thanks for watching. Mike

@Youtubecensoredmyusername 3 года назад

The shop that built mine (Anaheim gear 😭 ca) Couldn’t do a half way decent job. Trans had a leaky input and I called and asked if I could just pull the motor and reseal it. They said yes. No more leak but I get noise with the clutch out. I encourage anyone to try cause it can’t be worse than mine done by a shop

@lynnanderson975 6 лет назад

Your videos are fantastic, and have saved me a huge amount of time and money...greatly appreciate your effort!

@UCanDoIt2Mike 6 лет назад

Glad you found the video series useful. Makes it all worth the while to share, when I find out they help others! Thanks for sharing your feedback.

@eliinthewolverinestate6729 8 месяцев назад

My thrust washer broke. Then I broke 3rd gear selector. To be able to move the jeep. And forgot to put thrust washer in. Been a while so rewatching some videos on it.

@UCanDoIt2Mike 8 месяцев назад

This would be one build that you don't want to have parts left over when you think you're done. ;) Mike

@CraftwerksMC 2 года назад

Just came across your video while looking for ar5 rebuild info and this transamission seems to share the body and size of the Aisin ar5's that were in the colorados up to 2008. Might come in handy. Thanks for the video!

@UCanDoIt2Mike 2 года назад

Yes. I believe they are extremely similar. I remember seeing reference to it when I rebuild mine. Can’t remember the difference off hand. Cheers!

@mdn61999 4 года назад

Thank you for posting the video! I'm following it step by step and rebuilding tlmy AX15

@UCanDoIt2Mike 3 года назад

Sweet! Enjoy your build!

@MrRay3801 7 лет назад

Stumbled across your channel today and absolutely love the content you're putting out. You tackle projects almost the exact way I do.....I even make up 3 ring binders with info I print out from the web and study it before I actually do the work. Keep up the good work and can't wait to see the conclusion to you LM7 build. New subscriber and predict you will have many many more in the very near future.

@UCanDoIt2Mike 7 лет назад

Raymond, I really appreciate you taking the time to post your response. I love observing the way people think and organize their thoughts. I often run across people that approach things as I would and love it! Keep hangin' around, looking to have a lot of fun. Thank you! Thank you!

@angelrodriguez6590 7 лет назад

WOW!!! Great Channel, just gave me the motivation i needed to start my own build. Thanks for putting in time and work.

@UCanDoIt2Mike 7 лет назад

I really appreciate you taking the time to provide your feedback!!!!! Love it!!!

@FluffyCatDogs 5 лет назад

After watching this, I realized that I’m going to take my ax15 to the shop because this is too complicated

@UCanDoIt2Mike 5 лет назад

You Know!!!! The series was meant to provide a good idea of what it takes to rebuild this Transmission. With that... everyone needs to make the decision whether it is something they want to tackle or not. Cheers to you!!!!!

@brandonbehee3359 5 лет назад

same

@ChrisLawley43 Год назад

First part I’m watching now I’m thinking hell yeah I’m gonna do it when the time comes. I rebuilt and re-geared my dana 44 and currently in transfercase rebuild. I’m all for this I sure like a good challenge. This guy explains real well.

@sushil1983 7 лет назад

great to see you working in your jeep, i doing the same in my 95 yj

@UCanDoIt2Mike 7 лет назад

I've owned this CJ for 28 years and it is time for a refresh. Have a lot of fun so far. Thanks for watching and good luck with yours. We may run into some similar issues. Cheers!

@delbryan3253 5 лет назад

I like the video you put on here and I seen all of them and I would like to see what else you did to Rowdy can’t wait to hear the 5.7 motor and all the work you did to Rowdy

@UCanDoIt2Mike 5 лет назад

Thank you Sir! I have a little bit of footage that I need to get out sometime. And some replacement parts that I have acquired. Cheers!!! Mike

@DoubleRRestorations 7 лет назад

Great work Mike. The TH400 for Project Overkill one of the things that I hired done. I would like to rebuild the t-10 on my 81 Camaro, but that will be awhile yet. Great vid.

@UCanDoIt2Mike 7 лет назад

Hey... now automatic transmissions are another story! I would love to assist someone with experience do one. Otherwise, always have a fallback... someone that is willing to take your box of disassembled parts and put it back together! ;) Definitely worth researching the effort for the T-10.

@mattrobertson8265 3 года назад

Awesome video new subscriber

@UCanDoIt2Mike 3 года назад

Glad you enjoyed the video. Hope your projects are doing well. Cheers!!!

@nissan300ztt 7 лет назад

Awesome Video.

@user-xt6ng5jh8i 9 месяцев назад

I got a 1976 cj5 I’m fixing to take all apart and redo it’s got 304 v8

@UCanDoIt2Mike 9 месяцев назад

These old Jeeps are very fun and easy to work on. Have fun with yours! Mike

@user-xt6ng5jh8i 9 месяцев назад

@@UCanDoIt2Mike Thanks

@montanalowgear8258 7 лет назад

this is absolutely fantastic Mike!

@UCanDoIt2Mike 7 лет назад

This is one of the coolest things that I have done in a long time. Really enjoyed the process. It was very straight forward with the documentation that I found. I feel very confident with the outcome. Thank you sir!

@montanalowgear8258 7 лет назад

Well you made it look easy as usual I really wanna do something like this myself lol that th350 is just sitting there haha!

@UCanDoIt2Mike 7 лет назад

The experience was very therapeutic to my engineering mind! I enjoyed the research and preparation just as much as the build. In part 2, I'll break out the Hydraulic Press!

@flinch622 4 месяца назад

Oils... I seem to recall that GL-4 is what is needed anytime a system has yellow metals.

@UCanDoIt2Mike 4 месяца назад

That is correct. There is a GL-5, but it is not recommended with yellow metals. I use a GL-4 product.

@thinkteamhustlebrand2195 7 лет назад

Nice Job Big Mike!!! Keep up the good work...

@UCanDoIt2Mike 7 лет назад

Thank you Kenny! It's been too many years my friend!

@ronicard 7 лет назад

Nicely done. Really good video!

@UCanDoIt2Mike 7 лет назад

Thank you Ron! I appreciate the feedback.

@curtisgreen481 3 года назад

Several questions for you: 1 Is there a tailshaft for this transmission that can be used for a two wheel drive system ?. 2 Can this system be modified to use a mechanical clutch (not hydroloilc ?) 3 What system or combination of systems can be used to install this transmission using a old school mopar engine (pre-1962) 1955 241 hemi?

@curtisgreen481 3 года назад

Thank you very much

@UCanDoIt2Mike 3 года назад

I believe there are 2WD versions of this transmission. Not sure if there are any issues with placing the 2WD tail section on a 4WD version. Assuming the output shaft would need to be swapped out possibly. Both mechanical and hydraulic clutch options are available. That is independent of the Trans.

@MileytheJeepV2 2 года назад

@@UCanDoIt2Mike would a mechanical clutch be the better way to go?

@fuKwa_99 4 года назад

Do you happen to have like a tool list or something to show me all the tools i would need to do this project? Currently about to tear my ax-15 out and rebuild and this video is definitely the reason i'm ganna try and do it myself. Great content and thanks for sharing your experience!

@UCanDoIt2Mike 4 года назад

I actually don't. Off the cuff, there are a few items that I can think of that might not be in everyone shop. 12 Ton Hydraulic Press (HF), Bearing Separators (I believe I used two different Sizes, HFrieght), Pulley Puller, a good pair of Snap Ring Pliers, and Feeler Gauges. That should get you started. I really enjoyed the Trans project. I learned so much. Cheers, have fun, and be safe! Mike

@martinw9425 3 года назад

Thank you for doing this , i have my ax15 in the corner in the garage, i know i should do it for my second yj, WHERE DID YOU FOUND THE SHOP MANUAL?

@UCanDoIt2Mike 3 года назад

I downloaded it from the internet somewhere. I have attached it to the description section of the video. You can download it free from there.

@RichieCat4223 5 лет назад

When you deal with a O-Ring plug like the lock ball. Hit the face of it with a large face punch or hammer. It will break free with no effort.

@ryanpaasch7464 3 года назад

I am later here. I like the video, very thorough. I am making a Plymouth valiant project with 360 mopar. Would this ax15 hold up to the 360? Close to 400hp and tq. I like sticks and a 5 speed would be great.

@UCanDoIt2Mike 3 года назад

I'm not sure. There certainly are stronger transmissions out there.

@marteck319 4 года назад

Great job pacing the teardown Mike. Where did you get the shop manual copy ?

@UCanDoIt2Mike 4 года назад

I had found the Service Guide somewhere on the Internet. If you cannot locate it, I can place it on a shared drive for you.

@RichieCat4223 5 лет назад

Please get yourself some snap ring pliers.

@Tsilsby 2 года назад

I know this video is old.. but are there any sites or companies that still sell ax15 products???

@UCanDoIt2Mike 2 года назад

Are you asking about spare/replacement parts? Rebuild kits and all individual parts are still available through a simple Google search.

@swapgarage3338 7 лет назад

What is the best fluid for that kind of transmission? And good luck with your project

@UCanDoIt2Mike 7 лет назад

I am not an expert, but here is what I have determined and believe to be true (and am going with)... The Original Manual specifies a lubricant with a GL-5 spec. They have since determined that GL-5 is very harmful on the Yellow metals in the transmissions (These are your Synchronizing Rings). They now recommend a GL-4 Lubricant, so that is what I am going with. I will be using Redline MT90 GL-4 (75W90). I have already purchased it, so that is what I will use. Hope that helps!

@mattsadach5208 6 лет назад

I just watched literally all your jeep vids. Where's the rest???

@UCanDoIt2Mike 6 лет назад

Still working on it. Actually working on it today. I'll get more posted soon. Thanks for watching!!!!

@mattsadach5208 6 лет назад

I'm an avid youtuber. Some of the greatest content I've ever seen. Keep up the great work. Keep um comin

@UCanDoIt2Mike 6 лет назад

I appreciate that Matt!!! Currently with all the sanding that is going on, I have to open the doors to help get the dust out. It is extremely hot and humid outside right now. I will keep plugging away at it. I may have to plan on a little shorter content per video through this time. I have the next vid 3/4 completed. Just waiting to finish sanding prep and then lay down some primer. Cheers!!!!! Mike

@stevejppcar6208 7 лет назад

You are welcome. This link is a great resource for gearing. www.grimmjeeper.com/gears.html Do not go by the actual tire size on your tires as most tires are usually smaller. Make sure you measure your tires and use the actual size.

@UCanDoIt2Mike 7 лет назад

Excellent! I have added this to my OneNote research page. Many thanks!

@weehatz3177 7 лет назад

How much experience did you have with transmissions before this project? I have learned more in teh last 36 minutes than in the previous 55 years. Do you know how much money you had in the trans once you were all done with it? I might have to buy one for $1000 or more...

@UCanDoIt2Mike 7 лет назад

Before this project , I had never seen the inside of a transmission! I am extremely mechanically inclined and love to learn new things. Reading through the service manual, I was convinced that I could do it. At the end of Part 3 (ru-vid.com?o=U&video_id=cmgu-4TxcAI), I listed the breakdown and the total cost that I have in this Transmission ($586). It was a fascinating experience. Thanks for your feedback!!!!!

@snowgoer540 6 лет назад

What is the point of the 5th gear upgrade? I can't find it anywhere?

@UCanDoIt2Mike 6 лет назад

I never could find thee reason that they offered an "Update" on the 5th gear. Only that they offered under a different part number the item that I used.

@snowgoer540 6 лет назад

UCanDoIt2 I did find somewhere that earlier AX15 popped out of gear a lot. But apparently they fixed it in later models. Mine is a 94 so I'm just going to assume it has it lol

@prevost8686 6 лет назад

snowgoer540 The Aisin units 5th gear is the weakest gear in the whole tranny. Guys riding the shifter with their hand going down the road will also mess 5th gear up. Toyota has owned Asin for years and I’ve rebuilt my share of them over the years. Hard parts for them can be very pricey,