AXIAL SCX10 - PROJECT BULLET PHASE 8 DRIVE SHAFTS

Подписаться 20 тыс.

Просмотров 43 тыс.

50% 1

This my build series on the Axial Scx10 titled Project Bullet. In this video I assemble and install the MIP drive shafts onto the axles and transmission. Enjoy the video my friends and thanks for watching!
iROCK STUDIOS LLC
PO BOX 5053
KAILUA KONA HI, 96745
iROCK™ RC/ iROCK™ Studios © 2014 iROCK STUDIOS LLC. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of iROCK Studios LLC. iROCK Studios LLC is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the iROCK RC film series broadcast on RU-vid is intended for entertainment purposes only.

Развлечения

Опубликовано:

30 окт 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@rocbud43 9 лет назад

These Axial Scx10 Phase Vids Are Going To Help Me Big Time With My Build. Awesome Work IRock.

@satorrotas 9 лет назад

Excellent demonstration, very well.

@WickedRCAdventures 9 лет назад

Can't wait to see it finished!

@WestCoastRC 9 лет назад

bomb proof!! nice upgrade!

@RCGIGSportugal 9 лет назад

Sweet Build! !! 100% beefy

@jmd200766mustang 9 лет назад

That rig is so sick bro!!! It's a shocka!!!

@nealquagonQUAGONRC69 9 лет назад

Man bro that's gonna be a tank!!

@BlackSmithRC 9 лет назад

Can't wait to get an SCX-10 so I can MIDWID. Great build bro!

@chrismillersrcfamily 9 лет назад

Looking good...

@Mrtojo 9 лет назад

Great video! Looking very good! That RC is going to be awesome!

@HinchoRacing 9 лет назад

That right is looking sick brother sweet

@BudgetGuyrc1967 9 лет назад

awesome work as usual my friend have fun rcing

@scalerc4x4 9 лет назад

That's is one tough rig. =] liked.

@georgesjunglerc 9 лет назад

Hey iROCK! Great job bud. Looks like the project is off to a great start. Thanks for sharing and happy building bud.

@HeliMouse 9 лет назад

Pretty good work man , liked

@dirtydsrc 8 лет назад

Yeh. The lower control arm got switched around. Very nice build vids buddy. :)

@JacobHayden 9 лет назад

Seen it @ 3:19 the input shaft on rear pumkin angle fixed and went from down to up Awesome glad it was fixed but wanted to see why it was facing down if it was the links reversed or pumkin and tubes not lined up because of all the different location options with how there made

@tinsleysmith2305 9 лет назад

Bro you have awesome video (keep pulling the trigger my friend)

@HighVoltsEntertainment 9 лет назад

Awesome video Bro!

@irockrc 9 лет назад

Thanks a ton Skip!HighVoltsRC

@blackmennewstyle 9 лет назад

This is Art of building :O Awesome! Happy halloween :)

@chieffirewolfBorgman 9 лет назад

Eye candy

@gerundlanada9851 9 лет назад

Cool

@irockrc 9 лет назад

Thank you Gerund!Gerund Lanada

@2011k 9 лет назад

Hello irock. Nice equipment here. I'm looking forward to seeing the final rig. Just one comment : it may be the video or just me but the angle of the rear axle's driveshaft is strange. Try to type "drive shaft angle" in google for more details. It can be adjusted with the length of the links. Thanks for the video.

@kendallreeves2994 9 лет назад

Ahh so sexy I've been dieing for some of those axles !! Lookin good !!

@JaxTellerRC 9 лет назад

Great vid Rock, whats in the contact lens container? thread lock and grease?

@texasrcmaniac5578 9 лет назад

Now you do know my friend...That you have to start all over and do this ALL with the 1/8 Yeti right? :)

@DanPRC 9 лет назад

What's up iRock, I tried to put some MIPs on the scx10 but one end rubs on the spur cover. Is it safe to run without that cover or does somebody make a slimmer case? Thanks in advance.

@irockrc 9 лет назад

Mostly likely you won't run into an issue but anything can happen out on the trails. From my experience I haven't had a problem running the Scx10 without the spur gear cover. The Tf2 & Gelande 2 don't have spur gear covers and I haven't had a problem with them either. When Axial first came out with the Scx10 it didn't come with a plastic spur gear cover. It became a safety concern for children so all of their RC's come with a spur gear cover. If you still want to run your Scx10 with the spur gear cover I would recommend going with an extended output shaft from www.supershafty.com Hope that helps my friend! Dan P

@DanPRC 9 лет назад

That helps a lot! Thanks brother! First I'll cut the section out that rubs and see how that works...but good to know I can run without it. One of my concerns was wires getting caught.

@tommyhammel 8 лет назад

Who makes those axles

@johnstevens7643 6 лет назад

Guarantee that sucker didn’t run right after this vid mip’s can’t angle like that mine had the gmade 93mm and they were binding I’m pretty sure those are the 103mm he has so 😬. Someone please prove me wrong lol

@devolutionrc8016 9 лет назад

Shaka and I'm out! :-)

@CarminesRCTipsandTricks 5 лет назад

Yeah..... NO Shaka!

@igorgamingrc 8 лет назад

Can you plz give me a part number for the biggest, strongest, and coolest axles for an scx10 thanks :)

@irockrc 8 лет назад

Front axles: www.rpphobby.com/product_p/vps06601.htm rear axles: www.rpphobby.com/product_p/vps06602.htm www.vanquishproducts.com/axial-scx10-parts/ Hope that helps my friend and thanks for watching! +igorgamingrc