Axial SCX10II - Proline Toyota SR5 

Thanks for the kind words!

Thanks for watching and commenting!

You just made my day! And will do!

Thank you! Much appreciated!

I’m a long time subscriber of your channel friend!

It’s the gearhead rack. It’s pricey but nice. www.ebay.com/itm/182021985680?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5T4EPG-ASLe&sssrc=2349624&ssuid=LyIirh6SRmu&var=&widget_ver=artemis&media=COPY

You can get it without the lightbar for cheaper. www.ebay.com/itm/311597945742?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5T4EPG-ASLe&sssrc=2349624&ssuid=LyIirh6SRmu&var=&widget_ver=artemis&media=COPY

@@krlaturn nice thank you!

I used 3D printed parts from Shapeways. Please see link below. I used front grill, front lenses, rear lenses, and rear light buckets. www.shapeways.com/shops/rc_nerds?li=pb

The wrap did ok. On hard hits it would tear and you could see the body underneath. But since it was patina it still looked good. I just used a heat gun to smooth out the tear. Thanks for watching and commenting friend!

I used the Shapeways front grill and rear proline sr5 light buckets. I wired up my own leds 👍🏻

that is the axial honcho bed/rollbar integrated into the proline body

@@montana4069 check out this video which explains how I did it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-A4XAMXVB4tI.htmlfeature=shared

Shapeways. Here are four links. www.shapeways.com/product/2LLNDF7ND/rcn004-full-grill-for-pro-line-toyota-sr5?optionId=62161655&li=marketplace www.shapeways.com/product/QLPLU9YJ2/rcn003-front-light-lenses-for-pro-line-toyota-sr5?optionId=62160178&li=marketplace www.shapeways.com/product/CR9QFPGW3/rcn015-rear-light-buckets-for-pro-line-toyota-sr5?optionId=62203073&li=marketplace www.shapeways.com/product/7U2GLKMNB/rcn016-rear-lights-lenses-for-pro-line-toyota-sr5?optionId=62203062&li=marketplace

It takes work. You have to wet sand and paint the lenses

@@krlaturn Thank you

Tamiya dark blue metallic

Thx for watching and kind words 👍🏻

Proline sr5 lexan

The body is a proline sr5 body. www.ebay.com/itm/273988370600

The rear rollcage and bed are from the axial honcho. You would need to find that on ebay either used or from a parted out kit.