B axis Turning NTRX300L using Mastercam and Camplete 

No problem, here is sample code of beginning of cutting: N1 M41(B AXIS TURNING) G54 G17 G00 G28 U0. V0. G28 W0. G340 T001001. G342 B0. I3. M785 G97 S3488 M04 G0 X3.4123 Y0. Z.1 G435 A1. D1. G98 G01 Z0. F50. X3.4481 Z-.0003 B-87.949 F17.44 X3.4838 Z-.0013 B-85.898 X3.5195 Z-.0029 B-83.847 X3.555 Z-.0051 B-81.796 X3.5903 Z-.008 B-79.745 X3.6254 Z-.0115 B-77.694 X3.6603 Z-.0156 B-75.644 X3.6948 Z-.0204 B-73.593 X3.7289 Z-.0257 B-71.542 X3.7627 Z-.0317 B-69.491 X3.796 Z-.0383 B-67.44 X3.8288 Z-.0454 B-65.389 X3.861 Z-.0532 B-63.338 X3.8927 Z-.0615 B-61.287 X3.9238 Z-.0704 B-59.236 X7.2273 Y-.0001 Z-1.1351 B-57.185 X7.2618 Z-1.1467 B-54.803 X7.2953 Z-1.159 B-52.42 X7.3277 Z-1.172 B-50.037 X7.359 Z-1.1857 B-47.654 X7.3891 Z-1.2001 B-45.272 X7.4181 Y.0001 Z-1.215 B-42.889 X7.4457 Y-.0001 Z-1.2305 B-40.506 X7.4721 Y.0001 Z-1.2466 B-38.123 X7.4971 Y-.0001 Z-1.2632 B-35.741 X7.5206 Z-1.2803 B-33.358 X7.5428 Y.0001 Z-1.2979 B-30.975

Thank you. Always fun trying something new.

No. I used Multiaxis module. Still haven't played much with the Mill Turn module

@@cuttingcnc9111 I bought millturn + multyaxis + moldplus a week ago Millturn module is so hard I use machine name is DMGMORI NTX2000/S1500 MAZAK INTEGREX J300

Nice machine list.I usually do not use Millturn since i find it easier to put my wait codes right on machine. Alot of nice features in Multiaxis.

@@cuttingcnc9111 Yes i know But millturn module have special tool path

@@policebox1092 Do you have some example, start and end code of B-axis turning for NTX2000/Fanuc? I would appreciate the help