B-Pillar Chop, Cutting Up A $50,000 Jeep Is Terrifying!

Подписаться 438 тыс.

Просмотров 163 тыс.

50% 1

Robby takes on the formidable challenge of slicing through the B-pillars of the Tread Lightly Jeep using the cutting-edge GenRight kit, showcasing precision and expertise at its finest. Meanwhile, the shop comes alive as our resident expert Hillbilly diligently engages in shop work, artfully spot welding and meticulously preparing truck beds for a pristine paint job.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton...
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Repair
ARMOR SHIELD IX DIY CERAMIC COATING KIT + FREE 16OZ ARMOR SHIELD LITE: avl.kg/robbyas...

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 269

@Majja13 11 месяцев назад

I am sure I am in the minority but I love it when I hear you or Cody explaining the why and the how. You are all a wealth of knowledge and we are the benefactors of that.

@mendonesiac 10 месяцев назад

I might be in the minority as well, but I see this channel as the 'body shop' I appreciate their 4x4 builds, but there's plenty of other channels for that content

@scottmiller2455 11 месяцев назад

Your videos of antics and adventures are good. BUT it was nice to see you back in the shop doing technical work and doing it to your high level of standards. I don't know how someone would think Hillbilly is being pushed to the side. I see you giving him more responsibility and him growing in confidence and knowledge. You appear to have very high standards in your profession and you are mentoring him. Thank you

@JRs-Garage 11 месяцев назад

Great to see Hillbilly improving and learning new skills 👍🏻👍🏻

@kenstringer9756 11 месяцев назад

I love the way hillbilly is getting better and better!

@erichall9438 11 месяцев назад

I’m not a child, I like your whole crew, I imagine trying to make RU-vid videos and run a full time shop takes all kinds of after hours work. Nice video gentlemen.

@davidweidner1675 11 месяцев назад

Good to see Hillbilly learning from an expert

@Peteblz1 11 месяцев назад

Hillbilly please use safety glasses when grinding man! We want you safe and sound bro! The channel needs you.

@shakes5847 11 месяцев назад

Usin the good ol' safety squint I see

@Peteblz1 11 месяцев назад

@@shakes5847 except he wasn't even doing that much. He's was straight up like 👀 hmmmmmmm

@remorrey 11 месяцев назад

Amen!!

@timhenson4815 11 месяцев назад

Hillbilly is doing such a great job !!! Seriously jack of all trades ! Great to see all of yall 👏 keep building awesome things

@dougalexander7204 11 месяцев назад

Mr. Layton with his crew trained for Robby perfection, he can fix anything from a broken heart to the crack of dawn, even weld a Mountain Dew can under water.

@5SpinnWin 11 месяцев назад

For the past 5 years the machine shop I work for has made all of swag offroad parts. I personally have been responsible for all of there fingerbrake line of products. Really cool to see them on this channel.

@jerryseal6062 11 месяцев назад

The interaction between you and Hillbilly is a large part of your attraction

@billbillinger2491 11 месяцев назад

15:10 Robbie doing the work of three... that's what a good business owner does. Keeps customers coming back. Too bad there's a LOT of grinding going on without eye protection. That can lead to more personnel 'outages'. Safety practices are best led by example...and holding employees accountable. Nobody wants a 'one-eyed body man'. They have no depth perception!

@surlyogre1476 11 месяцев назад

A wise man once (more than once, actually) said: "Safety rules are written in blood." Hillbilly, wear your safety glasses.

@DB-yj3qc 11 месяцев назад

Many U-tubers don't use eye pro it's drives many of us nuts. I've experienced quite a few incidents, always having glasses and or safety glasses/ face shield on has saved my eyes.

@gregorygene9003 11 месяцев назад

I love watching this type of body repair videos.

@timvanasen9822 11 месяцев назад

Great video Robby is lucky to have Hillbilly he'll do anything & learn something new if need be, Cody is a very skilled bodyman I like when he explains a project & polightly corrected Hillbilly with the "hingpiller that's good teaching, great video thanks for sharing ❤️😉👍

@Janer-52 11 месяцев назад

New stuff is always fun ...the fact you did your work first shows your dedication to your clients. Fun stuff and videos must always come second. I appreciate your work ethic (and your fun videos as well)!

@JohnGotts 11 месяцев назад

Want to add another comment that I really enjoy Mr. William from the Hills' work.

@user-nj2jn5ld8i 11 месяцев назад

What is the purpose of cutting the B pillars?

@bleakyfinder2692 11 месяцев назад

why are you cutting the the B pillers off, and then put on a connecting plate to put them back on again?

@Highlordratick 11 месяцев назад

It is like my motto says: Pay work comes before Playwork.

@bryanmcdermott4204 11 месяцев назад

This could have easily gone wrong. Robby has skills. Also, it was interesting to see how Hillbilly and Cody got the pickup done correctly. I have successfully done a similar job wrong before on my truck, and it showed.

@randymiller7521 11 месяцев назад

If it wasn’t for Hillbilly I wouldn’t watch this channel. You other guys are cool but Hillbilly makes it what it is.

@kellyamos1321 11 месяцев назад

Love it when Steve videos, please keep him on the camera!!!! Great job steve!

@jamesbigham9036 11 месяцев назад

Robby I like the divide and conquer method having Hillbilly working on other projects so u guys don't get behind schedule is smart.

@Classifiedreality 11 месяцев назад

15 mins of bobby and crew is never enough....just saynnnnn🙃😎🙃👨‍🌾🚜👨‍🌾

@danielmurray3496 11 месяцев назад

glad to be back in the shop the team seam to be great together Cody is a great wealth of knowledge and Stability good to see hillbilly learning more

@mcdavis101 11 месяцев назад

We need more Hillbilly!

@randyjones2494 11 месяцев назад

Hillbilly, you are awesome man, but please wear your safety glasses when grinding

@saintracheljarodm.holy-kay2560 11 месяцев назад

Sometimes that's just how the workload happens, have a blessed week amen.

@larrygomez5521 11 месяцев назад

King of free tools

@imfloridano5448 11 месяцев назад

Robby and crew keep making it happen as always. The content is always educational and informative to me if I ever attempt to assist anyone repair a damaged vehicle or metal working. The tips y'all provide, like 23rd Garage channel, are awesome👍🏾👍🏾👍🏾💯💯💯

@johnnyadams1755 11 месяцев назад

Funny watching Hillbilly critiquing Robbies welding.😂

@codymcclaskey1043 11 месяцев назад

would like to see Cody in more of your content!

@johnlennon335 11 месяцев назад

Safety glasses boys!

@gregb76 11 месяцев назад

Come on Robby I can't believe that Milwalke doesn't make a belt grinder but as a body shop, you should have one anyway. Robby you know we always love to watch you weld! Come on Steve you and Hillbilly should be working on the new press and pipe bender. Hillbilly making big muscles that is why you are so much country stronger than him. Hillbilly remember the children watching wear your eye protection they are too valuable. Great job guys love it.

@delbutler885 11 месяцев назад

Are you deaf? Robbie said that there's 3 guys in the body shop gone this week. We watched body work on the video because the paying work has to be done.

@lonhoschar1943 11 месяцев назад

Great video guys!! You are certainly a bunch of busy little bees!!! Love watching you guys work and seeing all the craftsmanship you put into your jobs!! NICE!!

@mattc.310 11 месяцев назад

Lots going on at the LAB shop. You guys are making it happen.

@MaskedUnknown408 11 месяцев назад

Wish I had friends at Harbor Frieght lol I could get some project done finally

@bobtucker8875 11 месяцев назад

Yeppers, I must say that you guys know what you're doing. There's no way alot of us could do what you do. Thanks 👍 for sharing.

@billybike57 11 месяцев назад

I’ve actually visited the SWAG shop in Portland, I purchased the portable bandsaw platform, love it. Quality products from SWAG!

@tonywoodward3167 11 месяцев назад

You guys do great work.we picked up our daughters car from our local body shop and it was cover in bird poop I wish they cared about their customers as much as you do.

@opendstudio7141 11 месяцев назад

Good job pulling together a nice video with an abundance of variety. With the BOSS out; people will complain about the minute changes though.🤷‍♂️

@808SSCamaro 11 месяцев назад

Only 6 months of waiting huh! I got to give you a hard time LOL! Thanks guys for sharing! Always cool seeing the repair videos!

@dustinadams6336 10 месяцев назад

I hate having to calibrate the welder every time you switch the head but it’s a nice machine. Use it seems like daily at work.

@happydaddy2618 11 месяцев назад

YALLLLLL SHOW SOME LOVE IF YOUR A MEMBER OF THE HILLBILLY HOARD! WE NEED SOME HOARD SHIRTS CUT!

@reddog543211 11 месяцев назад

Great job on the jeep....she's lookin great !!

@MarkoMygun 11 месяцев назад

Nice job Robby and Crew

@joemcintyre2090 11 месяцев назад

Props to Robby's skills!

@Johntasticful 11 месяцев назад

Cool to see Cody

@imonlyaman4381 11 месяцев назад

Thanks for the video guys! You're doing great.

@stephenpoe2037 11 месяцев назад

NO REST FOR THE WEARY ! Thanks for sharing !

@RambozoClown 11 месяцев назад

You really need a TIG welder.

@DirtyDiezel 11 месяцев назад

less Robby more Hillbilly!

@Frippa212 11 месяцев назад

Great work as always!! Keep it up and we’ll see you in the next video 👍👍

@Autodoc3275 11 месяцев назад

Not so terrifying that he's cutting the piller. Terrifying that jeeps cost $50k now lol

@brandenthompson6351 11 месяцев назад

I dought hillbilly is going anywhere. As businesses grow they need good employees and he's definitely not a bad employee. Just because Robby is bringing someone else into the videos doesn't mean alot is changin.he just probably wants to show more of his crew off. Love the video and will wait for the next

@albertdehn8381 11 месяцев назад

Thanks for sharing 😀👍

@danknight5019 11 месяцев назад

Hillbilly don’t forget your safety glasses, you only get one set of eyes 😅

@garychaiken808 10 месяцев назад

Great job guys 😊

@RayleighCriterion 11 месяцев назад

It would be nice if Hill Billy would wear safety squints when grinding.

@misharoy284 11 месяцев назад

Hello from Corey in Fredericton New Brunswick Canada

@kimetherington2252 11 месяцев назад

Shortstaffed and lots of irons in the fire! Talk about multitasking, I don't know how you keep things straight! I can hardly wait until you get back on the laymo, I'm really looking forward to that! Til next time, see you then. 😊

@mikecamrcplus3057 11 месяцев назад

Grinding with glasses once I felt something in my eye. Thought it would get better and so didn't worry about it. It was minor but after the 3rd day it still bothered me on and off. Thought I had scratched it rubbing it. Ended up going to the doctor to be sure. Well he was not happy. Being hot it had burned into my eye and so did not come out. After 3 days it also started to rust. So use eye protection but even then if you feel something go get the dye treatment and checked properly.

@edwicks66 11 месяцев назад

Hurry hurry , and get it done . Hurry !

@TheOldaz1 11 месяцев назад

So the B pillar top section is no longer attached to the lower section? How does that go for the upper seat belt mounting in the event of an accident??

@louis220558 11 месяцев назад

GREAT JOB

@randalmartin438 11 месяцев назад

And that's the rub to be in the boss you're the fill in for everybody else

@robda7195 11 месяцев назад

When you blow through on a weld stop count to 20 then carry on don't keep at it as you'll only be chasing your tail and making a TRD show

@johnkranz4004 11 месяцев назад

Very nice job guys

@auldman 11 месяцев назад

How does this not weaken the B-pillars? The B-pillar started as a double skinned box section that gave good bending resistance. Now it just rests there with only a pin to stop it sliding about and gives no bending resistance!

@joshdaniel7894 10 месяцев назад

Rollse lggee

@taylormade710 11 месяцев назад

Nice work.

@sandkworkshop 11 месяцев назад

Interesting stuff as usual.

@thomasgraham5842 11 месяцев назад

got the lasor level , but was the jeep level on the floor . tyre presure up down swing it all around , was the floor lever to the jeep being level for the lasor .

@SudoSamurai 11 месяцев назад

You spelled laser wrong.. twice. 🎉

@HandTightGarage 11 месяцев назад

You missed something. He used the Laser as a straight edge, not a level.

@robertsmith7580 11 месяцев назад

Hillbilly safety glasses man !

@neilfromclearwaterfl81 11 месяцев назад

Sometimes its the even simpler jobs than cutting the B-Pillars that can be even more Terrifying. Imagine the simple task of installing a relatively inexpensive CB antenna dead square in the middle of the roof of a new off the showroom floor top end custom Maserati brought in by a Lawyer to a very small shop in 1978. No Internet or RU-vid Videos to find out how to remove the headliner or even know if it was possible to install the antenna in the required location. I would have refused the job as the risk was greater than the cap on the small shops liability policy. Boss did the work himself, ended up in court and lost everything paying the damages. Something about violating the structural integrity of the roof due to where he drilled the hole. A seemingly minor mishap can become an extinction level event for a small shop. Best!

@carlstephens-tm7zj 11 месяцев назад

What is the purpose of the pieces you installed in the B pillar. Please explain for us that don’t know why you installed them

@dbo11tango 11 месяцев назад

You guys on this video one min after it drops like you're running a Drag Tree. Lol i don't even get notified till 5mins max after a video drops.

@ordinarypete 11 месяцев назад

Same. I’ve been on RU-vid when it drops and still don’t get the notification for five minutes or so.

@dbo11tango 11 месяцев назад

@ordinarypete They're running youtube Cheat Codes or something lol

@UncleManuel 11 месяцев назад

This really is a nice "bee pillar job kid"! 😁🤟

@GeorgeT6566 11 месяцев назад

No boss lady on Mondays. Oh well I am out of here until she comes back. LOL

@donmadere4237 11 месяцев назад

Swagg off-road makes some cool stuff that works great!

@bob3485 11 месяцев назад

Thanks for the video Robby. 💯

@1944chevytruck 11 месяцев назад

AWESOME!

@redzed40 11 месяцев назад

14:01 safety glasses mate..you only have one set of eyes 👀

@johngraymusic 10 месяцев назад

Colton looks like Jerry Cantrell from the rock group Alice In Chains!! Rock on dude!!

@_Merica_USA 11 месяцев назад

Another Great Video 👍 Great content, keep up the great work!

@jmjm6607 11 месяцев назад

great job again.

@keithhill9138 11 месяцев назад

Just remember Robbie use the tools that you spent good money for (like your level) to do the job except the job on the Jeep where you had to be unlevel!

@Christian76S 11 месяцев назад

AWWWWRRRRRSOME !

@MrDan1509 11 месяцев назад

Lasers are cool, just gotta make sure the subject being worked on is level. I learned myself real fast on a slight bathroom fuq-up🤣

@riquimikulewicz6828 11 месяцев назад

Robby has to be a multi millionaire cause that man spends more money then ill ever see 😅😢

@terryderush2657 11 месяцев назад

Great 👍 stuff 👍 🇺🇸

@riffraff9000 11 месяцев назад

"Laser beams, in my dreams..."

@randyjackson8138 10 месяцев назад

Awesome video as always watching you guys build stuff, but have to say why do you guys never wear safety glasses. I have had metal in my eye and can say it’s not fun getting it removed. Thank as sharing