Тёмный

B58 DOCRace Turbo Kit Install DIY 

kern417
Подписаться 24 тыс.
Просмотров 41 тыс.
50% 1

Driving sounds: • DOCRace Top Mount Turb...
This video walks you through the installation of a Doc Race Turbo Kit for F-series BMW with the B58 engine.
Turbo kit:
docrace.com/collections/turbo...
Kit Contents:
EFR Turbo
Turbo accessories
- Wastegate Bracket
- Wastegate Arm
- 4x Wastegate mounting nuts/bolts
- Recirc Valve blockoff
- Oil Feed line + fittings
- Oil Drain Hose + fittings
- Coolant feed line + fittings
- Coolant Drain line + fittings
Intake Filter
Doc Race Turbo Manifold
- T4 Gasket
- 4x Studs/nuts
Doc Race Chargepipe
- Upper Chargepipe
- Lower Chargepipe
- Silicone 90° coupler
- Silicone reducer coupler
- 4x Hose Clamps
Doc Race Downpipe
- Heat Wrap
- 1x Vband Clamp
PCV System
- PCV Dump tube
- T-fitting
- PCV Filter
- 4x Hose clamps
OEM Parts you'll need
1x Chargepipe Gasket: 13547563377
1x Turbo Manifold Gasket: 11657643149
7x Turbo Manifold Nuts: 11658670587
1x Oil Line O-Ring (Feed): 11427590576
1x Oil Line O-Ring (Drain): 11427590577
1x Coolant Line O-Ring (Feed & Drain): 11277702625
------------------------------------------------------------------------------------------------------------------------------------
Become a Channel Member by joining my Patreon to get access to perks:
/ kern417
Order your B58 parts through my BimmerNetwork Affiliate Link (Coupon Code "kern417"):
www.bimmernetwork.com/?afmc=k...
Blackvue Affiliate Link: shop.blackvue.com/shop/ref/ke...
Coupon Code (10% off): kern417
MERCHANDISE
T-Shirts: kern417.creator-spring.com
Stickers: $5 each. Email kern417yt@gmail.com
FOLLOW ME ON MY SOCIAL MEDIA
/ kern417youtube
/ kern417
/ kern417
Support the people that support me! If anything that I post has influenced your buying decision, please let the company know and tag me on social media!
Sponsors:
DOCRace
docrace.com/
/ doc_race
/ docracemanifolds
OdinTuned
/ odintuned
/ odintuned
‪@KiesMotorsports‬
www.kiesmotorsports.com/?aff=28
/ kiesmotorsports
/ kiesmotorsports
Eurocharged Cincinnati
eurocharged.com/
/ eurochargedcincy
/ eurochargedcincy
Blackvue Dash Cameras
shop.blackvue.com/shop/ref/ke...
/ blackvueofficial
/ blackvueofficial
Paradigm Engineering
paradigmengineering.co/?ref=k...
/ paradigm_engineering
/ paradigmengineeringllc
Ross Racing Performance
www.rossrperformance.com/
/ rossrperformance
/ rossrperformance
BimmerNetwork
www.bimmernetwork.com/?afmc=k...
/ bimmernetwork
/ bimmernetworkco

Авто/Мото

Опубликовано:

 

18 фев 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 150   
@kern417
@kern417 7 месяцев назад
Driving sounds after installing the turbo: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hGs9gHhAObw.html
@tumorroww
@tumorroww Год назад
your channel should be waaaaay bigger than it is. In love with this turbo!
@BMWEnjoyer
@BMWEnjoyer 2 года назад
Kern. Your videos are so valuable and helpful. Thank you for taking the time to make these. Once I get my 340i I am going to have this video up while I do the job. Thank you, thank you, thank you!
@BMWEnjoyer
@BMWEnjoyer 2 года назад
Question: Would there be any benefit to adding an oil catch can instead of having the PCV vent to the atmosphere? Would it be possible with this kit? I'm sorry if you've already answered this somewhere, I haven't finished watching all of the videos yet.
@kern417
@kern417 2 года назад
It just depends if you're pushing a lot of oil. I'm not but some people have routed that hose to a VTA can.
@ruru2500
@ruru2500 3 года назад
I've been going through your videos and each one is great, keep it up!
@kenbias3523
@kenbias3523 3 года назад
Excellent tutorial!
@jacobmiller624
@jacobmiller624 3 года назад
Videos are great starting to think I can do this myself. hope to see the tuning and street driving videos soon!!!
@dedicate2559
@dedicate2559 3 года назад
Cant wait!!
@kern417
@kern417 3 года назад
Thanks for the support guys
@jackdiamondss
@jackdiamondss 3 года назад
great video
@waqariqbal125
@waqariqbal125 3 года назад
Wow, Docrace kit should sponsor this.
@aarondostou3888
@aarondostou3888 3 года назад
Excellent walk through
@kern417
@kern417 3 года назад
Thank you
@hefnerdon7462
@hefnerdon7462 2 года назад
Thanks for build list keep up the content
@F60Stunt
@F60Stunt Год назад
Bro got the most underrated chanel
@kern417
@kern417 Год назад
🙏🏾
@davec5237
@davec5237 3 года назад
Cool thanks for posting 👍
@yardkidd87
@yardkidd87 2 года назад
Great video bro
@aslannlannie3376
@aslannlannie3376 3 года назад
Bro your a boss , great work 👌
@kern417
@kern417 3 года назад
Thanks so much
@JO3KAH
@JO3KAH 3 года назад
You deserve way more subs. Keep it up buddy.
@kern417
@kern417 3 года назад
Thanks a lot for that
@seanmarrero3461
@seanmarrero3461 10 месяцев назад
This is great!
@ProcTech
@ProcTech 3 года назад
Goals! Thx
@anthonyh958
@anthonyh958 2 года назад
Superb sir
@ravneetsingh8612
@ravneetsingh8612 3 года назад
Damn that TURBO came with a whole ass engine LOL
@mphRagnarok
@mphRagnarok 3 года назад
You do some amazing camera work in really really tricky spots and angles. It's like you have a third arm. Bravo sir
@kern417
@kern417 3 года назад
Lol just the power of a cell phone. Thanks
@mphRagnarok
@mphRagnarok 3 года назад
@@kern417 seriously so many people have no idea what's actually in frame or in focus on their phone camera. Most often they just point vaguely and uselessly and don't move the camera at all
@ianbehm4837
@ianbehm4837 3 года назад
Awesome!
@LivinWith3M
@LivinWith3M 2 года назад
Awesome video and channel. New subscriber here!
@_luckii
@_luckii 3 года назад
Legend 💯
@Pitchplus8
@Pitchplus8 3 года назад
Nice video bro. Pls make a power measurement and a 100 - 200 kmh video. Greetings from germany.
@kern417
@kern417 3 года назад
Absolutely
@Idke92
@Idke92 3 года назад
Hey started watching ur videos love how detailed you are about what you’re talking about I’m looking into getting a 340i just not sure which year I should go with and what I should consider when getting one ? I had a 335i n54 fbo and loved it but it was a money pit always putting new parts don’t want the same problem Would like to hear what u think I should go with ?
@kern417
@kern417 3 года назад
I recommend 2017-2019
@trevorjelam
@trevorjelam 3 года назад
💪💪
@dantem306
@dantem306 3 года назад
Easiest sub ever, I just got my 340i
@kern417
@kern417 3 года назад
Thanks a lot man
@dantem306
@dantem306 3 года назад
kern417 followed on IG too, BodaciousB58
@ChrisDavis333
@ChrisDavis333 3 месяца назад
What else do you need for a righ like this? Do you have to build the trans? Outside of the turbo and the manifold, what upgrades are required?
@harjassingh9357
@harjassingh9357 5 месяцев назад
Yo kern, what happens to the CAI after you install a top mount turbo kit, where is it placed?
@ItsTheBlkStar
@ItsTheBlkStar Год назад
Is the coolant and oil feed locations on the block the same for n55?
@bhaskarakovvuri707
@bhaskarakovvuri707 5 месяцев назад
What size is the T fitting? For the EVap currently doing the install and struck there haha
@MrTheonly1one
@MrTheonly1one 3 года назад
Gradz car goals! More vids tunes dyno races in Mexico And are you daily driving?
@kern417
@kern417 3 года назад
I do in the good weather but it's parked in winter
@rhodybimmers8094
@rhodybimmers8094 3 года назад
Make sure you wrap your downpipe with heat wrap
@kern417
@kern417 3 года назад
Yep i was rushing and completely forgot haha
@Ghostinthe90s
@Ghostinthe90s 2 года назад
Hey man question used your video to install a doc racing turbo kit to a a90. How would you go about checking for a boost leak? If I run a smoke machine where would you check? Thanks
@kern417
@kern417 2 года назад
Remove the intake and attach it to the turbo then pressurize the system
@todddooley793
@todddooley793 2 года назад
Does a xdrive setup create a much harder instal? I know it does on the n55 but not sure about the m240 b58.
@kern417
@kern417 2 года назад
No it does not
@kosditrade
@kosditrade Год назад
Hi kern! Your video is very helpful. I saw in your video that your PCV outlet and EVAP vent out in open air. But now you don't get a vacuum leak? Or these two vents are only outlet when crankcase is positive? When crankcase is negative it will not suck air back into these 2 outlets? (it has check valves?) Many thanks to explain!
@kern417
@kern417 Год назад
Yes it has a check valve
@kosditrade
@kosditrade Год назад
@@kern417 oké, then it is clear, than you!
@nazeermohamed-gm8bw
@nazeermohamed-gm8bw Год назад
Good day kern just fitted my hybrid turbo and When I press the ignition button it closes and opens but after starting it stays open which I know is for cold start once cold start is complete ,it then remains open and no boost because the wastegate stays opened any advice
@kern417
@kern417 Год назад
Not sure i understand your issue but the first step is always scan for codes.
@RWattz24
@RWattz24 2 года назад
Hey what’s the link for the bmw insta software
@chuggalueroifan
@chuggalueroifan 2 года назад
Can you do a video on how to install the Ista+ on a computer
@kern417
@kern417 2 года назад
I'll see what I can do
@twinb5840
@twinb5840 Год назад
I wish doc racing still made this kit instead of ditching the Borg-Warner
@kern417
@kern417 Год назад
Me too but EFRs were always back-ordered
@JohnUnnever
@JohnUnnever Год назад
Do you still recommend this turbo kit for the B58 ? I have an a90 supra and i'm considering top mount options as well as hybrid turbo options. Does the kit come with everything needed or are there any supplemental parts required to gather outside of the kit?
@kern417
@kern417 Год назад
Yes i think it's worth it. There are new precision Options
@Antimatter.
@Antimatter. 3 года назад
Nice job on the Tutorial 👍, Why didn’t you install the waste gate actuator on the bracket first so you can install all 4 bolts , then install the bracket to the turbo , leaving bolts out is not cool
@kern417
@kern417 3 года назад
Unfortunately the 2nd 2 bolts didn't fit with the welds that were in place. The 1st 2 still hold it in securely.
@Antimatter.
@Antimatter. 3 года назад
@@kern417 Gotcha 👍Thanks
@NikkoCruz1
@NikkoCruz1 4 месяца назад
Did that crank case hose and filter come with the kit or did you get that separate?
@kern417
@kern417 4 месяца назад
came with it
@alanle249
@alanle249 3 года назад
Do you let the car run or just turn the ignition to ON when running the ista software?
@kern417
@kern417 3 года назад
I just turn on the ignition in accessory mode. I actually haven't used it with the car running but I believe it works as well
@brianlopez6374
@brianlopez6374 9 месяцев назад
do you need to change the gaskets if your reinstalling the same turbo
@kern417
@kern417 9 месяцев назад
highly recommended
@AmoDiaLZ
@AmoDiaLZ 2 года назад
For the 340i, is this do-able? Can you do this on a 340i? What would you need to do on the car if not?
@kern417
@kern417 2 года назад
Yes
@j.f.4765
@j.f.4765 3 года назад
Bro, when you do mechanical and electronic waterpump bleed. Do you keep both cap off? Cheers
@kern417
@kern417 3 года назад
I did
@carlsagan3065
@carlsagan3065 3 года назад
Air needs to escape
@Thatslow340
@Thatslow340 2 года назад
My computer wont support ista+ but I’ve spent hours trying to get it in range, it keeps closing/opening, but won’t close again.. any tips?
@kern417
@kern417 2 года назад
Try this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BGLLO7I7RFs.html
@melvinkimble7709
@melvinkimble7709 3 года назад
You need to put those other two screws in your waste gate actuator it has play
@kern417
@kern417 3 года назад
I will when i find more motivation but there are several guys running without them
@kern417
@kern417 3 года назад
Oh and the movement you see is the wastegate bracket not the screws. It's flexing from the wastegate finding its end stops
@xxthehuskycaboosexx
@xxthehuskycaboosexx 7 месяцев назад
Do you still have the cast manifold? Or have you gone tubular?
@kern417
@kern417 7 месяцев назад
it's a tubular manifold
@kosditrade
@kosditrade Год назад
Hi kern! Can you run your set without any tune? (+airflow sensor) Just for short testing if everything is oké. Or i have changes to make damage to engine? Many thanks for your answer.
@kern417
@kern417 Год назад
Theoretically yes but I never tried
@kosditrade
@kosditrade Год назад
@@kern417 Thank you!
@Rabbit.Hole.Racing.
@Rabbit.Hole.Racing. 2 года назад
does this kit fit the b58 found in the 2022 m240i?
@kern417
@kern417 2 года назад
DOCRace makes a kit for it
@sambrown8359
@sambrown8359 3 года назад
How are you supposed to take the filter out to clean?
@kern417
@kern417 3 года назад
Unbolt the turbo and lift it up
@dylanxyap2.0
@dylanxyap2.0 2 года назад
would this be the same install process on the A90 Supra? there's no other detailed videos like this on RU-vid
@kern417
@kern417 2 года назад
For the most part the same. The pcv vent setup is slightly different but you can figure it out from this video
@Ghostinthe90s
@Ghostinthe90s 2 года назад
I’m using this video to install my doc racing turbo kit on my A90. Great question Dylan
@dylanxyap2.0
@dylanxyap2.0 2 года назад
@@Ghostinthe90s update video when it’s all complete?
@KingDiamondBones
@KingDiamondBones Год назад
@@Ghostinthe90s how much Hp can the doc turbo give
@yonnyeilat9541
@yonnyeilat9541 2 года назад
what size did you get? i checked their website and they have 700whp-900whp sizes
@kern417
@kern417 2 года назад
8374
@killagiant907
@killagiant907 3 года назад
What's your power goals for the car? I recently purchased a 2017 340 xdrive and I like the idea of the top mount setup. What should be my first purchase? I currently have the MPPSK exhaust from BMW
@kern417
@kern417 3 года назад
550-600 for now. Your first purchase should be a tune
@killagiant907
@killagiant907 3 года назад
@@kern417 I have a MHD but haven't installed it yet. Was looking to get a downpipe so I can go straight to stage 2. What's your thoughts?
@kern417
@kern417 3 года назад
@@killagiant907 stage 1 is great. Stage 2 with a downpipe will be very loud with your exhaust so be prepared for that. If you have ethanol available then the perfect combo is downpipe+hpfp and do stage 2+ e30
@killagiant907
@killagiant907 3 года назад
Thanks @@kern417!
@Thatslow340
@Thatslow340 11 месяцев назад
Hey, what are the manifold nut torque specs or recommendations? I keep blowing the gasket every 4 months for the past 2 years with the doc race kit
@kern417
@kern417 11 месяцев назад
i used stock, but i learned it's important to double check torque after the gasket relaxes. So tighten it, wait a bit, then torque again.
@Thatslow340
@Thatslow340 11 месяцев назад
@@kern417 will definitely try that, appreciate it
@oneofm3409
@oneofm3409 3 года назад
Nice video. Can you run stock map on it?
@kern417
@kern417 3 года назад
Yes but I'd always recommend a custom tune
@oneofm3409
@oneofm3409 3 года назад
@@kern417 are u gonna use turbo blanket?
@kern417
@kern417 3 года назад
Yes and wrap the exhaust as well. I was so excited to get everything on I forgot to show it in the video
@bmwsincekid
@bmwsincekid Год назад
Thanks for The Video !! Where can i download ista from ???
@kern417
@kern417 Год назад
Search online. I found download links on a bmw forum
@bmwsincekid
@bmwsincekid Год назад
@@kern417 thanks ..
@michaelgranville1733
@michaelgranville1733 2 года назад
Who makes that air filter on turbo? Would work perfect for what im doing. Thanks.
@kern417
@kern417 2 года назад
DOCRace
@marqdre6529
@marqdre6529 2 года назад
Did you change your studs?
@kern417
@kern417 2 года назад
I ended up adding 7 studs to the bottom, that's it
@BigBlueRacing
@BigBlueRacing 3 года назад
What program are you using to calibrate the waste gate
@kern417
@kern417 3 года назад
ISTA
@luisvargas4577
@luisvargas4577 2 года назад
@@kern417 what version of ISTA do you have?
@hifam6451
@hifam6451 3 года назад
So um, this looks easier than the n54, as in...a lot easier. Is it?
@kern417
@kern417 3 года назад
Your eyes do not deceive you
@yardkidd87
@yardkidd87 2 года назад
What did u make on pump gas?
@kern417
@kern417 2 года назад
Never got to dyno unfortunately. I estimate around 520-530
@dtpman776
@dtpman776 3 года назад
does the calibration work with the a90 as well since they use the same engine and all? Doing a turbo install soon
@kern417
@kern417 3 года назад
Yes it should. All the engine electronics are BMW
@dtpman776
@dtpman776 3 года назад
@@kern417 okay, so I can use the same software as well with my ecu ? Thank you again for replying
@kern417
@kern417 3 года назад
@@dtpman776 yeah look up ISTA on the bimmerfest coding forums. You can also do it the trial and error way
@dtpman776
@dtpman776 3 года назад
@@kern417 AWESOME!! ill try to use the software first and if it fails ill do the trial and error way. Amazing video as well
@dtpman776
@dtpman776 3 года назад
Could you link the ENET Cable that you used?
@kietnguyen08
@kietnguyen08 2 года назад
So no intercooler need ?
@kern417
@kern417 2 года назад
No
@Track.340i
@Track.340i 3 года назад
Could you explain me step by step how the bleeding works for the coolant didn’t quite get it sorry
@kern417
@kern417 3 года назад
Press the start stop button three times (Should end with the car on but the engine not running) Turn the fan on the lowest speed with the highest temp for the gas pedal for 15 seconds until you hear the electronic water pump start running Turn on the engine Stay in park and hold the throttle at around 3500 RPM for about 10 seconds. Then let it go back to idle Do that 10 times to bleed the mechanical pump Top off your coolant levels as needed
@llkjjjss
@llkjjjss 2 года назад
Comment for the algorithm
@overlordtype25
@overlordtype25 Год назад
Hey this engine looks exactly what’s under my supra weird🤔
@kern417
@kern417 Год назад
🤔🤯
@beamerandthebeast3979
@beamerandthebeast3979 3 года назад
Wow... this is easier than n54...
@kern417
@kern417 3 года назад
Absolutely
@silver_n5442
@silver_n5442 3 года назад
Damn, its that simple to change the turbo on the b58!?!? This is a breeze compared to when I upgraded twins on my n54 😂
@kern417
@kern417 3 года назад
It's awesome. The engine is great but being so easy to work on makes it a winner
@silver_n5442
@silver_n5442 3 года назад
@@kern417 Will definitely be getting a car with b58 in the future once they're a bit older/cheaper.
@kern417
@kern417 3 года назад
You won't regret it
@nightfallm4981
@nightfallm4981 3 года назад
I just watch to hear your voice
@kern417
@kern417 3 года назад
Dawww shucks
@robertlawson1184
@robertlawson1184 2 года назад
just pull fuel relay
Далее
B58 DOCRace Turbo Kit Unboxing
11:57
Просмотров 8 тыс.
Guide to B58 Tuning "Stages" and Recommended Upgrades
7:20
Installing Port Injection on my 440i!
22:21
Просмотров 14 тыс.
Upgrading the LPFP on my Big Turbo 440i!
29:10
Просмотров 6 тыс.
HOW TO UPGRADE YOUR B58 | My Recommended Mod Path!!!
17:41
How much torque can the stock B58 Transmission handle?
14:02
Malo vozim, malo punim 😉🤣
0:16
Просмотров 4,3 млн