Тёмный

Bad News: FUEL INJECTOR Leak 

JeepSolid
Подписаться 83 тыс.
Просмотров 59 тыс.
50% 1

I found a leak at my fuel injector. Come along as I diagnose why it's leaking.
Proudly sponsored by Enginetech enginetech.com/
Engine rebuild kit I used on my 4.0L rebuild: amzn.to/2WuNdbu
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
👨‍🔧 A few of my favorite tools 👇
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver I use. Love this thing
amzn.to/2fTDoTR
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeepyj #jeepwrangler #jeeps
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Опубликовано:

 

15 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 52   
@randyrichards5647
@randyrichards5647 2 года назад
Thanks man. This really helped. I was able to find the leak and repair it.
@laadams5617
@laadams5617 4 года назад
Thanks again. I was on my way out to work today and smelled gas and sure enough, a leaking fuel injector. Thanks for the video, it helped me out ✌
@moabwheeling
@moabwheeling 4 года назад
Good job Dale . At least you found it at home instead of on the road when your jeep was on fire . Looking forward to your next video . Until next time take care ,
@JeepSolid
@JeepSolid 4 года назад
But man a jeep fire would have been good footage! Haha 😂
@chrif3398
@chrif3398 4 года назад
Had to replace oil scraper rings, and headgasket, finally got the motor put back together and I smelled the gas. Sure enough my injector had spit an ungodly amount of fuel all over the engine. Luckily It was just a upper o ring not seating correctly. Bought a new one just to be safe. So happy that somehow that was the only issue that I had!
@greenmarine5
@greenmarine5 2 года назад
Glad you got the problem fixed, I ran into the same thing with my Honda Motorcycle, I thought it was also leaking from the air box side but it was actually leaking from the fuel rail side running down, Haven't fixed it or been riding yet but for a $1.45 fix I will certainly try this. Thank you for the video excellent content 👍
@arniceousmaximus2183
@arniceousmaximus2183 3 года назад
ty experiencing something with injectors stopped by now I have more of an understanding after watching, calling a trusted shop tomorrow. thanks!!
@Eurospec73
@Eurospec73 3 года назад
Excellent video sir, I'm glad I came across this video because I'm working on my Volkswagen VR6 Corrado and I just did a fuel injector swap and unfortunately one of my fuel injectors are leaking. I spent about 6 hours doing the job and I'm so ticked off right now. I like how you said don't put those o-rings in dry or else they can leak. I think that was my problem I put most of them in dry without using any dialectic grease or whatever it is and perhaps that's why it's leaking have a blessed day sir thank God for this video.👍 What's the best type of lubricant to use for these fuel injector rings?
@akmr789
@akmr789 2 года назад
I did some injectors clean up and l put them back dry, now I'm having a leak, I hope it gets fixed after I try that
@Eurospec73
@Eurospec73 2 года назад
@@akmr789 Make sure the chamber walls are clean with no dirt or grease in them before you put the fuel injectors back in and most importantly make sure you use dialectic Grease all around. Whatever you do don't force them in just rock them back and forth like a seesaw until you hear or feel a slight pop, that's when you know they're secured. I made the mistake of pushing one of mine too far in so definitely use a magic marker and mark the height of the fuel injector before and after that way you won't have any more leaks it's so important!
@felixvargas4112
@felixvargas4112 4 года назад
Good video Dale! This is a major help.. I started having a hard start issue. I'm hoping this is the problem..
@billbly1691
@billbly1691 4 года назад
Love your channel look forward to seeing your videos thank you
@JeepSolid
@JeepSolid 4 года назад
Great! Thank you
@allenwatkins4972
@allenwatkins4972 3 года назад
Buy two sets of "O" rings. It's very easy to damage/twist them during installation and so have dangerous fuel leaks. Two sets. No leaks.
@n2cable
@n2cable 2 года назад
lol...2 sets is always a good call but the whole Hellfire explosion thing is a bit of a 2022 thing. Snowflakes can figure it out but 2 drops of gas aint gonna do a thing
@jozik_sk
@jozik_sk 2 года назад
You mean 2 rings per injector ?
@malungamutunda121
@malungamutunda121 3 года назад
great job, you saved my day😉😉😉👍👍👍👍👌👌👌
@Luigi-yu5wv
@Luigi-yu5wv 2 года назад
Great video!!!! Thanks for sharing!!!!!!!!!!
@drgil65
@drgil65 3 года назад
Thanks for your video, it’s been over a year now, did you notice any difference with the 4 port? Thanks again.
@tomf3969
@tomf3969 8 месяцев назад
Dale, what would you estimate was your elapsed time for this task?
@tomdonnelly611
@tomdonnelly611 4 года назад
Great job Dale....I’m curious to know if you have ever had an issue with the fuel pressure regulator O rings? Mine has gotten torn more than once and man can that make the engine run bad! Btw good luck with the radiator.
@JeepSolid
@JeepSolid 4 года назад
Mine is ok so far
@jat-justamaturetech-philpj8285
Im now getting on the odometer a p1292 fuel relay after i did a fuel pressure test with a jumper on the fuse fuel pump relay. No engine codes. I had just replaced injectors and regulator. Im getting a little murmur at idle when cold @ 700 rpm but running great on acceleration. Do you think i need to run more miles on it for the ecm to learn as i only have less than 40 miles on new injectors.
@blackfang2619
@blackfang2619 2 года назад
How long do you have to wait to remove the fuel injector to clear out from gas before starting to remove them after the car was running?
@michaelburtin3457
@michaelburtin3457 3 года назад
Did you notice a fuel smell and idling roughly wen starting up the car and did that leak get into the spark plugs holes wen gas smell is on top of the engine or should I just replace the o rings
@TheJurassicJunkie
@TheJurassicJunkie 4 года назад
Nice work! Also, I just love the sound of the Jeep's straight 6. After re-assembling my YJ's engine, a god awful squeak reared its head. Not sure yet if it's a bad alignment of the belt pulleys or a bad new part (I've replaced all accessories and idlers with new parts when I rebuilt it).
@JeepSolid
@JeepSolid 4 года назад
And new belt?
@TheJurassicJunkie
@TheJurassicJunkie 4 года назад
@@JeepSolid Yep!
@BroncoSolid
@BroncoSolid 4 года назад
Automotive stethoscope time
@TheJurassicJunkie
@TheJurassicJunkie 4 года назад
@@BroncoSolid Right? Funny enough, I actually have one. Once it gets warmer out I plan on clearing off the Jeep and trying to do something about that squeal! lol Also, when are we going to see more JP Jeep vids? 😉
@mikedaugherty7645
@mikedaugherty7645 3 года назад
I have had a leak ever since installing a crown automotive rail last summer, is it possible that the aftermarket rail isnt allowing it to seat proper? Its number 4 like yours did..went through 2 sets of injectors and numerous o-rings.. still leaking
@rondoschiavoni8840
@rondoschiavoni8840 2 года назад
my kind of guy DIY not those rip off dealers
@stevenbruce9617
@stevenbruce9617 2 года назад
I have a whistling sound coming from my jeep do you have any answers
@alvinlawanto
@alvinlawanto 3 года назад
What problem did you feel when driving the car?
@Corporal_Fluffy
@Corporal_Fluffy 3 года назад
Mine looked just like this, the same leak on the top of the engine bay but its black and not yellow.. the colour is black like oil
@michaelburtin3457
@michaelburtin3457 2 года назад
Was that oil mixed with gasoline
@RandomVids-hx1py
@RandomVids-hx1py Год назад
Wish I knew about the jelly before. My fuel shot out 😮
@gordongman3423
@gordongman3423 4 года назад
Polish the inside of the rail where the fuel injector goes in with a fiber brush (very lightly). Aluminum does oxidize. A little spit on the o-ring, yea spit, it works. Lol. And the injector will slide right in.
@JeepSolid
@JeepSolid 4 года назад
Good idea. Man it sure was a tight fit! But got it in, and so far so good.
@cjstubejackofalltrade1551
@cjstubejackofalltrade1551 3 года назад
I smelt gas and puddle of Diesle all over engine on my VW golf last night. Gonna be a crazy day looking for a Mechanic.
@ksk5517
@ksk5517 3 года назад
Go Hawks!
@travisguy6044
@travisguy6044 3 года назад
Got a 96 Laredo 4.0 was my stepdads work car hes maintained it well but had enough this time when it started missing i bought it been trying to get it going replaced the distributor noticed 1or2 plugs fowed bad soaked with gas the mis is still there and then noticed the oil smelled of gas finally would u say there's definitely a leaky injector iam running out of ideas anyone able to help me with some ideas?
@revolutionday1
@revolutionday1 2 года назад
Just put 4-hole injectors in my WJ's 4.0 motor, and the goddamn FPD (fuel pulsation damper/dampener) is leaking gasoline onto the hot intake manifold now. Use a lubricant called "P-80" on fuel injector O-rings. You'll thank me for it.
@starrvalley12
@starrvalley12 4 года назад
Still think about that red Jeep you had, sorry to say but you should of kept it.
@JeepSolid
@JeepSolid 4 года назад
Yeah! It was a good one. But I have new plans.. 😁
@leskobrandon538
@leskobrandon538 4 года назад
There is a specific o-ring lube that helps... It's a pink paste
@JeepSolid
@JeepSolid 4 года назад
Good to know 👍🏽
@sinr666
@sinr666 4 года назад
a bad fuel injector can leak coolant also?
@chrif3398
@chrif3398 4 года назад
No. That would most likely be a headgasket leak, or if lits leaking coolant on the outside it it most likely a water pump gasket, or the pump itself or just a hose somewhere.
@jat-justamaturetech-philpj8285
And you still haven't replaced the belt. 😂
@maniacalmonster2293
@maniacalmonster2293 2 года назад
So if one leaky injector, off with the entire fuel rail? Daaamnit ☹☹
Далее
How To Clean Your Dirty Or Clogged Fuel Injectors
17:22
РЫБКА С ПИВОМ
00:39
Просмотров 626 тыс.
САМАЯ ТУПАЯ СМЕРТЬ / ЧЕРНЕЦ
1:04:43
Better Fuel Injectors?? 4 hole VS 1 hole
10:17
Просмотров 65 тыс.
SYMPTOMS OF LEAKING FUEL INJECTOR ANY CAR
6:32
Просмотров 36 тыс.
Fuel Injector Upgrade Install
8:32
Просмотров 339 тыс.
Fuel Pressure Issues: How to test Jeep Fuel Pressure.
11:59
Jeep 4.0 Fuel Injector Replacement
19:27
Просмотров 34 тыс.
РЫБКА С ПИВОМ
00:39
Просмотров 626 тыс.