Bafang LCD 850c/DPC14 Display for BBSHD, BBS02, BBS01 

It actually has a light sensor built into it. That's what the little dot at the bottom of the screen is. it will auto dim the screen and turn your headlight on (if you have one tied to the controller) automatically. Really nice feature!

Incredibly helpful video! Very easy to follow. Thanks!

This video saved me a lot of time and aggravation. Thank you very much!! Aaron

great information, loud and clear, just got me an X1 with this display

Very helpful walkthrough of the 850c. I think only topic left uncovered is purpose / meaning of the yellow band that gooes around the bottom of the circular display. Much appreciated!

It is great people like you help out lazy people like me.

A lovely smooth tutorial on this display👌 Brilliant 👏👏👏👏👏👏

Just ordered my kit with this dispay. Thanks for reviewing it.

Just got this system today very helpful video thanks again

Thanks! I got one today, fitted on 20" folding bike. It's going like crazy! Just needed to know how to set up right parameters on it!

Very helpful description it heped me to change the miles to kilometers, thank you

Great video, much easier than reading the manual.

Great video - simple and comprehensive. Thanks for posting and sharing..

Brilliantly explained 👍👍👍

Just bought a bafang 48v 750w with this display, Hence why im looking at this vid, lol, Feels like a little kid waiting for xmas now i bought it, I got a really nice carerra hellcat lmt edition 29 inch, Green an black colours are amazing, Looking forward to different travelling, I got a 1600w monster scooter see, So be kool to see what difference is on hills ect, As the 750w is 1500w at peak, Isnt it, lol.... Cant wait to actually get the bafang motor now, lol....

Excellent job. Thank you!

Good video. Do you know if you can extend the cable for the push button control. I have a beach cruiser with a BBSHD and ape hanger bars, and the original monochrome display had a hard wired cable from the display to the control pad. It was too short to reach to the grip so I put one of those smaller displays that mount near the grip with the button integrated. I want that 850c display but obviously want the assist buttons near the grip.

Thank you. I'm getting the DPC-18. Hope its the same.

Thanks: Great video.Got my Trek build going today Bafang BBS02 doesn't have instructions for the 850 c. I put a 52v 1500 w battery on it.It almost pops a wheelie.

Thanks, very helpful!😊

Thanks for the video man.

Thank you so much. Well done..

I recently got the DPC 14 for the features it showed. Especially the range indicator. Unfortunately it doesn’t seem to be calculating properly as it keeps rising until the high 400 and then it stops and resets itself to 1klm and stays there. The only way to start it again is to turn off the display and back on but it keeps doing the same. Any input on this situation would be greatly appreciated.

Great. Video.....very informative

nice vids mate - which display do u think is the best to get? the DPC18 or 850c or 860c or 500c ??

Awesome vide, thanks for the info..

Very helpful thanks.

this was a big help in setting up my screen, thanks! BUT the time will not stay set . When I turn off the battery it seems to go back to factory settings. So when I next use the bike the time is wrong again. What am I doing wrong? Thanks

So cool

very useful info thanks

Hi great video but can't see the difference between this 850c and the c18 display?

The clock is the time saved after removing battery or do you have to reset the time again?

can I use a 36v battery on a 750 watts BBS02 48v?

There was a question if you Can change The speed limit and your Answer was if we had seen The video. Does that mean if you buy this and replace it, it Will work out of The Box? I just bought a Leader fox Lucas With bafang m420 today, and The display looks exactly like this, but under advanced i Can only change 2 options - not The speed limit?

Excellent video. but I'm confused about the differences between 850C, P850C and 860C. Can you point me to some place that compares these products. I wish you had a video on each.

Changing the speed, is that as in its set for uk speed restrictions by increasing it the bike can go faster?

Thank you 🙏

Does this display work on the voilamart kits?

Does this display work with the 750 hubdrive bafang moters

How many 3.5 - 4.0 inch displays are there for the Bafang models ?

*Hello! Please tell me which display models will fit my BAFANG 500W motor? 850 C with UART protocol does not suit me! We really need your help! Thank you!*

Hi, how do i change the percentage from increments of 20% with my 850c display

why there is a different voltage setting? is the bafang bbs02b 48v 750w can pair with 36v 20ah battery?

IS THERE A WAY TO CHANGE BACK GROUND COLOUR? MINE IS SET TO WHITE OR BLACK EVERYTHING ELSE IS IN COLOUR

I am running a 52volt battery on my bafang 750w. Is this display capable of running a 52v battery. Does it have the ability to change it in the settings?? Any info would be of much help. It is very unclear trying to get a straight answer, alot of conflicting info.

will this work on any ebike ? i got a ebike with befang 965 right now but wanna change to get accses to more info and settings

Is this can use to unlock speed in mate X 250w,?

is there a cruise control on it?

how do you change bafang 850c display clock from 24 to 12 hour?

Very helpful ta

How do you disable the pedal assist? I want to go fully throttle.

When you put in the wheel size I assume it is the rear wheel? I have 20” front and 26” rear tire size. Thanks for a very good video!

Great video. On mine at the bottom of the screen I seen lit up 21 hrs what does this mean thanks .never seen it before

What the different between 850c & c965?

told me what i needed to know

Helpful video but I do have one question. I just purchase a 850c colour display for my Voltbike Yukon. Everything is perfect except for the odometer. The odometer reads 497,715 total km and I can’t figure out how to zero it out so I can start with a zero Km. Any help would be appreciated.

Hi mate ,my bike keep going to p with out my will and moves even when I put it a zero

i have a rear hub motor can i make it work with rear hub motor

I just cannot get the MPH to work? sensor seems to blink showing operation & correct depth, but i get 1 to 5mph or 3 to 9kmh?, just don't know what to do next?, power clock voltage all working.

Why are there like 8 displays to choose.from.bafang? Super.confusing.... which one or 2 are the best?

why is the power uip passsword promp coming on ?

Is there a controller that allows you to set the motors output power in watts? I would like to get a 1000w motor and still keep the class 1 or 2 designation by limiting both continuous output power (500w) and by speed sensor to 32 km/h then when off-road I could set it back to no restrictions?

Does this unit enable you to alter speed limitations or does it come with restrictions on altering this attribute?

Hi . My bafang 48v 500w . But display shows me error 08H . And motor no run. What does mean 08H . please help me.thanks

I would like to know what the differences are, if any, between the 850C, 860C and C18. They all seem to have the same settings. The Bafang web site only shows the C18. Does this mean the 850C and 860C and discontinued?

Hi I wonder if you can only turn of pedal assist but thumb gas still works?

Hope you can help me.When I turn on display the battery lite comes on and goes off only when I use throttle. BUT HAVE NO PEDDLE ASSIST.???????

How can I change the voltage options so I can select 52v. I can only see 36 or 48v?

So this one can calculate how far can Drive on battery?

how to update firmware this display for example "scenes" only analog mayby in new firmware another scenes is available

I put the code and not let me to change advanced settings. Why?

Good...now, mid-drive (52v @ 50amps) or rear MP5 @ 52v. Or even setup a 2wd w/GM hubs? ;-)

Можно подружить его с китайскими контроллерами кунтенг?

What is ube on assist settings

Is it waterproof? I just got one and I'm not sure!

What's cap out ?

when I brake at higher speeds the display shows me a red exclamation mark and when I want to start again it no longer accepts gas. The display shows km but the bike is standing, as if holding the brake and the red exclamation mark is still on the display.

2 years ago i bought a Bafang middlemotor with this 850C Display. The Discription said its a 48V System. Later i recognized that i could change the settings to a diffrent voltage. When my 48V Battery was done i bought a 36V battery and changed the settings to 36V. But the System still thinks there is a 48V battery. And because the 36V battery has fully loaded only 38V the Display/System thinks the battery is low in voltage and doesn't allows to start the motor. I tryed the reset to factory settings and changed again to 36V. Even so the system accepts this change by showing 36V in the main menu it still thinks there should be a 48V Battery and shuts of the motor. What can i do? Bafang support service is not anwsering my mails.

More info on battery info cap'out etc

Is this display unit fixed to the bike, or can you quickly dismount it, to take it with you when park, and lock up, in a public place? Thanks.

I already have a DPC-18 but (after 10,000 km) it's heavily scratched and also 1 of my buttons are bent. So how does the 850c compare to the DPC-18?

setting a password on start up only seems to effect the display, the bike still works when no password has been inputted , to me this kinda makes having a password set useless, someone can still jump on your bike switch it on and ride away at full power

I have a problem, my Bafang 750w 48v 17.5 Ah doesn't give me any range information? Anyone else with the same problem? Or maybe a fix?

Hi can you help me about something please?

Come programmare L acceleratore??

I can install this display for my ebike 36v, 350w ?

hello this display with controller, can it support 14s battery? because I installed a 13s battery and when it is charged to full 54.6v on the screen it indicates that it is at 93% please help me

Anyone know what pedal assist UBE stands for I have been trying to figure this out and he just skipped over it without saying?

When I charge it, it doesn't show 100%, what is the reason?

Hello, can I install hydraulic brakes with this display?

Does the 850c allow you to set a power level limit - like suppose you want to use a 48V battery with a 250 Watt motor and keep the power under 250W so the motor will not overheat. ?

Dude how did u get the battery % in the top right? Cheers

When does the range update?

Can I use this display to any other ebike

I had a 21A! show up on mine, what does that mean?

hello bro mujhe ek issue ha plzz resolve do bro😢

Come sbloccare motore con questo displei

hello it is possible dont reset the value of trip?

Good job, I has suscribed👌. Voy a montar un kit con este display. Subiré videos a mi canal de ytb EBK ErgoooBike 😜👌🏻

Where are the list of error codes and solutions?