No video :(

Ballistic Goggle Paintball Test | Wiley X vs First Strike【 Warheads Paintball 】

Подписаться 2,8 тыс.

Просмотров 3 тыс.

50% 1

Full goggle test of the WileyX SPEAR seated on a dummy face (MIL-PRF-32432(GL), clear thermal lens used. FSR's fired at 310-322 FPS at ca 1-1.5 m. FS T15 Gen4 used during this test. The goggles withstand multiple direct lens hits. Small paint splatter was noticeable after several fire sequences and was caused by left over water and paint around the frame from earlier washes. During no fire sequences did the frame separate from the lens nor was any paint or shell debris hitting the eyes of the dummy.
!Always replace your lens after a direct hit!
Wiley X official ▶️ • Wiley X Ballistic Testing
Subscribe for more ⏩ www.youtube.co...
• Music - Danheim - Tyrfing (Modified)
• Markers - First Strike T15 Gen4
• Cameras - Sony RX100 MK4
• Sponsor ➡️ www.tacticalstore.se
Promo Code 10% ▶️ warhead2019
• Website - www.warheadspaintball.com
We are Warheads. A small but dedicated team of players focusing heavily on the Mag-Fed/Mil-Sim side of Paintball, but love every aspect of Paintball. Our play style is solely Mag-Fed with aggressive yet tactical strategies and we prefer to keep our groups small and effective.
This channel is dedicated to share our experiences throughout Europe.
#warheadspaintball # #magfedpaintball
All Rights To Their Respective Owners

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@romeoromojr613 4 года назад

There still very good goggles thumbs up bra 👍👍👍

@andreasrosenlind3202 3 года назад

Kan ni göra en film kring utförandet av dessa masker, vilket material osv.. ?

@WarheadsPaintballOfficial 3 года назад

Hej, vi har inga planer på det i nuläget men finns det ett större intresse kan vi absolut planera in en video 🙂

@XRacKS 4 года назад

I won't trust them... I saw a guy on the field who got a lense shot and the lense "detached" (was still in the frame) itself... a second shot would have cost his eyes... he never used the combi again...

@WarheadsPaintballOfficial 4 года назад

You don't have to. Which brand was he using and how were they connected? We've seen many many masks and lenses shatter, problem was they were cheep knockoffs.

@Frinz 4 года назад

i still only trust in certified paintball masks

@WarheadsPaintballOfficial 4 года назад

That's good. You should play with what feels best, it's each player's choice.

@baokhanglacasse8778 4 года назад

A center in Montreal, Quebec already banned mesh mask because there was an incident, and the owner said it would probably extend to all fields soon.... I have no details about the incident if it was really something dangerous or the owner's fault

@WarheadsPaintballOfficial 4 года назад

We hope the accident was of no severe nature. Do you know what brand or how that mask was used? There are many risks involved in Paintball and faulty or wrongly used gear is one of them.

@baokhanglacasse8778 4 года назад

@@WarheadsPaintballOfficial no info on anything.. :/ except in was at a specific center indoor.

@LtKevin 4 года назад

Hmm, I'd like to know about this too. I play mainly in Paintball Mirabel (30ish minutes from Montreal) with a JT goggle and mesh mask combo and they've yet to ban it. I only play outdoors but it would make more sense indoors to ban considering the chaos and distance.

@WarheadsPaintballOfficial 4 года назад

@@LtKevin your eyesight is one of the most precious things you have. But clearly if using the right equipment the right way you're safe. Remember First strikes were globally banned and still are in some areas. It's up to how protective each field owners is and that you have to respect.

@baokhanglacasse8778 4 года назад

@@LtKevin I really hopes it does not become a general ban un Quebec...:/

@nekit102 4 года назад

Could you please show or give us some tips on how to make that pair of protective googles and mask? Did you just use thermoglue to hold them together?

@WarheadsPaintballOfficial 4 года назад

We do not as of yet have a guide on how we fuse the two parts together. But in basic terms, the mesh is sawed to a snug fit. The heavy duty or metal stripes secured the mesh to the goggle. At the same time construction glue is used while merging the two. At the seam (inside and outside) a elastic sealment is used to ensure no gaps and that paint or moisture won't compromise the glue. As a final step a fabric strip is glued along the seam as yet a layer of protection and as estethics.

@nekit102 4 года назад

@@WarheadsPaintballOfficial Vielen Dank!

@BartGoem 3 года назад

@@WarheadsPaintballOfficial Hi. Interesting Thanks. How did you secure the mesh with the metal stripes exactly? Or is it only the glue that holds the mesh and goggle together?

@WarheadsPaintballOfficial 3 года назад

@@BartGoem Hi, it's secured be removing the fabric edge at the top of the mesh and looping the stripes through the mesh and the goggles. Then the glue is added as a second layer of security and filament. Lastly the fabric edge is put back over the seam as a third layer, both for esthetics and further protection 🙂

@BartGoem 3 года назад

@@WarheadsPaintballOfficial Thanks. You did use metal stripes or filament? And did you bore holes in the goggles?