Bambu Lab A1 Combo - AMS 3D Printer - Unbox & Setup 

OMG THANK YOU! This seems to be the ONLY video out in RU-vid land that actually shows you how to use the external spool! HUGE THANK YOU!

This is hands-down the BEST review I have ever seen of a 3d printer. Thanks dude....SUBSCRIBED!

In the slicer there are setting that you can tweak, plus community made filliment changes g-codes that makes it least wasteful and faster. Also the purge block can 60% smaller and it works fine

Bambu filament rolls have an rfid tag on them that tells the printer what color and material they are when loaded in an ams/ams lite. Also it's not a purge block, it's a prime tower, it's priming the nozzle with the color it's getting ready to print.

Great timing on dropping A1 review, when recommend by Bambu to not be used. Gotta give them a big thumbs up though for their honesty 👍 #transparency #honesty #A1review

That's a very impressive package. I'm relieved that it comes with a very nice little tool kit. I'll probably order mine today.

Mate I've watched alot of printer reviews and ur reviews and camera work are probably the best I've seen. We'll done. No one else focuses on the actual product itself the way u do. Thier all too interested in being in front of the camera which detracts from the product. Anyway keep up the great work

I’m really enjoying your videos, just purchased a P1P, your videos are really great and helpful.

Thank you so much ! We are new to 3D printing and this device was a tip from a friend and with you're video we can make a decision to buy it.

1:02:50 Bro you skipped the most interesting option in BambuStudio: The Flush options. We'd like to see how much purge/filament can be saved when printing flush into infill or supports.

One of the few subs I watch to the very end. Always thorough always helpful. I just bought the ams for my A1 and thanks to you I can set it up and poop :)Thank you

Show us how to do a re-boxing cause we may all have to send them back lol I liked and literally saved this video for when I am sending it back 🤣

Great review and demo. I bought an a1 mini since the a1 is on recall, but I didn't buy the a1 mini combo, just the machine itself. I love it. As soon as the full size a1 comes back in stock after the recall I'm grabbing one, probably with the ams lite.

The AMS knows what colour the filaments are because each Bambu filament roll has an RFID tag in it and the AMS reads it and sends it to the printer.

Hello from Romania ! love your vids!

Great video and man do I love this printer. Maybe I will still keep my Artillery X1 because it does larger prints.

A power outage system could also prevent electronic damage to your A1. Loved all your demo and review.

hey vlad great video, used this to build my A1!

You're lucky. I didn't receive grease with my order. I ordered the same kit, you did plus six Filament reels. Sorry, I got the mini version of it

Thanks for the good Video 👍🏻

What I did was put the cables into the ams facing forward so they bend forward

Nice Vlad

Great video just waiting to receive my A1 Combo printer I also have an Ender3v3se and Creality CR6se been 3d printing for 5 years no more manual levelling anymore out with the older printer in with the new....

Please do the A1 mini I need a review like yours (yours are the best)

Good video, but bad timing. Bambu has asked for everyone to turn them off until they come up with a solution to the cable problem

First Class video five stars to you.

The only reason to get AMS for me, was to be able to have PVA supports for some parts, to avoid having to divide and glue them. However, if that turns out too slow, I'll still probably divide and glue...

You are incredible 🎉

thats crazy fast

In Florida heb je ook outlet malls en daar is het zeker een stuk goedkoper. Ik haal spijkerbroeken bij Walmart. 15,- voor een Wrangler broek. Zit mij prima. Ik heb het foodcourt ff gemist in de mall.

I did not expect it to be so loud, its my first printer. It was not crazy loud but yes, I would not go to bed with that. From the door out of my room I cannot hear it anymore, but I can from within the room haha. Thats cute..... Headphones and thats it haha.

I've seen a few reviewers complain that the little tabs near the rear corners aren't high enough and they've had an issue where the build plate ends up on one of them and causes the plate to be raised and hit by the tip.

Can you do a review for the ender 3 v3 ke?

Thanks for making this. This is by far the best one

22:17: Fun fact, the A1 Mini and A1 doesn't have speakers, the tone you heard was produced by the stepper motors.

Who knew pandas had sloth hands 🤣

I would like to ask if I can only print with brands that have a 3D printer in the system or can I also print with other brands?

that vibration compensation sounded like a d*mn railgun charging up or something lmao

Wouldn’t use PET (or PLA) on brake calipers, they get way too hot!

Unfortunately the timing of the release of this video is at the same time that they are now asking ALL A1s to not be used regardless of cable damage or not.

22:15 Fun fact: The melody the printer is playing is coming from the stepper motors 😊

if you have many power outages, I would suggest an UPS. my printers are all connected to UPS...

If you recycle that's good but if you throw it away that's a huge waste. I would probably create a sorting machine to sort all the waste of the 4 colors on it own container so after that recycling it by re-melting will be easy

hello, did you pay for the filament swatches or did it come with the printer? I am looking to get one and would like to have it. Thanks.

We have all been told NOT to use our A1 whether or not you think the heat bed cable is defective or not !!!

When will us mere mortals be able to get this?

Looks like there may be more filament wasted than in the panda. Weigh them?

I want to get into the 3D printing should I wait for the new version of the a1 to come out or should I go for the p1p and why or should I just go with a different 3D printer thanks in advance

K1c pls

CHEAP? HERE IS yet another question regarding the prices of PLA filaments in the Brazilian market. Recently, when comparing filament costs between the United States and Brazil, I came across a significant disparity. While in the United States the average cost of PLA filament is approximately 25.52 dollars, in Brazil, this cost is substantially higher, reaching around 127.08 reais on average. This price disparity led me to reflect on the accessibility of filaments for 3D printing in the Brazilian market. While in the United States the cost of filament represents approximately 2% of the average minimum wage, here in Brazil, this cost corresponds to approximately 9% of the minimum wage. This difference is considerable and raises questions about the access of these inputs to a wider audience. I understand that there are economic and logistical differences between the two countries that can influence production and distribution costs. However, the similarity in filament prices, despite these differences, suggests the need for a more in-depth analysis of pricing practices in the Brazilian market (I may be talking nonsense but in my opinion the value in Brazil should be at least 4% which is already twice as much as the United States and also some companies say that they are 100% Brazilian with raw materials from Brazil, so why this value of 9%) I can be one of the few to raise this flag and discuss ways to make PLA filaments more accessible and competitive in the Brazilian market, and accessible to more people. However, for personal reasons I may not directly enjoy this benefit if filaments become accessible to a wider audience. However, I insist and reiterate, I sincerely hope that more and more people raise this flag, firmly believing that a review of pricing and recycling policies for materials that went wrong or leftover printing (returning to that issue of multicolor printers), we will have more people with access to this incredible technology, and nature thanks you. BARATO? AQUI TEM MAIS mais uma questão em relação aos preços dos filamentos PLA no mercado brasileiro. Recentemente, ao comparar os custos do filamento entre os Estados Unidos e o Brasil, deparei-me com uma disparidade significativa. Enquanto nos Estados Unidos o custo médio do filamento PLA é de aproximadamente 25,52 dólares, no Brasil, esse custo é substancialmente mais alto, chegando a cerca de 127,08 reais em média. Essa disparidade de preços me levou a refletir sobre a acessibilidade dos filamentos para impressão 3D no mercado brasileiro. Enquanto nos Estados Unidos o custo do filamento representa aproximadamente 2% do salário mínimo médio, aqui no Brasil, esse custo corresponde a cerca de 9% do salário mínimo. Essa diferença é considerável e levanta questões sobre o acesso desses insumos a um público mais amplo. Entendo que existem diferenças econômicas e logísticas entre os dois países que podem influenciar nos custos de produção e distribuição. No entanto, a similaridade nos preços dos filamentos, apesar dessas diferenças, sugere a necessidade de uma análise mais aprofundada sobre as práticas de precificação no mercado brasileiro (posso estar falando besteira mais na minha opinião o valor no Brasil deveria ser de pelo menos 4% que já é o dobro que os Estados Unidos e também algumas empresas falam que são 100% brasileira com matéria prima do Brasil, então porque este valor de 9%) Posso ser um dos poucos a levantar esta bandeira e discutir maneiras de tornar os filamentos PLA mais acessíveis e competitivos no mercado brasileiro, e acessíveis a mais pessoas. No entanto, por motivos particulares talvez eu não usufrua diretamente desse benefício se os filamentos se tornarem acessíveis para um público maior. Contudo, insisto e reitero, espero sinceramente que mais e mais pessoas ergam esta bandeira, acreditando firmemente que uma revisão das políticas de precificação e reciclagem dos materiais que deram errado ou sobras de impressão (voltando àquela questão das impressoras multicoloridas), teremos mais pessoas com acesso a esta incrível tecnologia, e a natureza agradece.

the RFID chip on each spool tells the printer the colors. Work ONLY with BAMBU LABS spools

Isn't that the printer that left on fire

Are the 4 filaments provided with the A1 combo package ??

I hope that mine was not a return, I did not have plastic on the heat bed to peel off, and I also didn’t have cardboard over the printhead. 😢

The A1 3D has been pulled from their website and not available.Bambu Lab has recalled these printers due to defective heatbed cable mentioned by other posters.

Does it work with generic filament sold by Amazon.?

Play the video in reverse, I think that's the right thing to do yes or yes hahahahahahahaha

SHaringan flow wheel

There’s a recent recall on this printer. The bed cable can get damaged and cause a fire. They now recommend you don’t use this printer until they figure a solution out.

Wtf? I buy a p1s and had to buy the swatches extra and I didn’t get no engine build kit for $1,000 and you get all that with the smaller printer what B.S.😂

VLAD IS THE 🐐 OF 3D Printing

No mention of the recall or was this made before it or maybe there is no recall does that mean I can use my A1 3d printer?

First of all, I'll let you know that it has nothing to do with the channel, it's just a rant about the world of 3D printing. Today, I bring a different perspective on 3D printers, based on the research I carried out. I came to a conclusion that I would like to share. I have a comment about the world of 3D printing, which, contrary to what some say about accessibility, is still a world for few. Despite the criticism I may receive for this, I believe that although printers have become more affordable, there is still a long way to go before they become an achievable dream for many people, including myself. It's not just the initial cost of the printer that must be considered. An often overlooked point is the ongoing cost of the filament. Just like in the early days of inkjet printers, where the price of ink was an obstacle, today we face similar challenges with filament. Even though printers have become a little cheaper, filament remains a considerable investment. It is notable that over the years we have not seen a significant reduction in filament prices. There appears to be a lack of real competition, resulting in companies setting prices almost like a monopoly. Filament quality is also a concern, with reports of poor quality not justifying the investment. Another aspect that is rarely addressed is the amount of material wasted due to unsuccessful prints, especially for beginners. Even though errors decrease over time, they do not disappear completely. This is a relevant point to consider, as it contributes to additional costs and not to mention environmental issues. That's why I say it and I repeat, cast the first stone if anyone who has never been through this, even with vast experience, still prints with errors and has to do it all over again, no matter the printer or your knowledge, there will be errors and as a result waste of material and input costs. what we need and start thinking about this issue, well the filament should be cheaper or there should be a collection of inputs by suppliers especially those that went wrong or leftovers that new printers leave to make multicolor parts and why not buy back the material, it would help the person who bought it and nature thanks you. antes de qualquer coisa ja aviso que não tem nada a ver com o canal é apenas um desabafo sobre o mudo das impressões 3d Hoje, trago uma perspectiva diferente sobre impressoras 3D, baseada nas pesquisas que realizei. Cheguei a uma conclusão que gostaria de compartilhar. Tenho um comentário sobre o universo da impressão 3D, que, ao contrário do que alguns afirmam sobre a acessibilidade, ainda é um mundo para poucos. Apesar das críticas que posso receber por isso, acredito que, embora as impressoras tenham se tornado mais acessíveis, ainda há um longo caminho para que se tornem um sonho alcançável para muitas pessoas, incluindo eu mesmo. Não é apenas o custo inicial da impressora que deve ser considerado. Um ponto muitas vezes negligenciado é o custo contínuo do filamento. Assim como no início das impressoras a jato de tinta, onde o preço da tinta era um obstáculo, hoje enfrentamos desafios semelhantes com o filamento. Mesmo que as impressoras tenham ficado um pouco mais baratas, o filamento continua sendo um investimento considerável. É notável que, ao longo dos anos, não tenhamos visto uma redução significativa nos preços do filamento. Parece haver uma falta de concorrência real, resultando em empresas que estabelecem preços quase como um monopólio. A qualidade do filamento também é uma preocupação, com relatos de baixa qualidade que não justificam o investimento. Outro aspecto pouco abordado é a quantidade de material desperdiçado devido a impressões mal sucedidas, especialmente para iniciantes. Mesmo que os erros diminuam com o tempo, não desaparecem completamente. Este é um ponto relevante a considerar, pois contribui para custos adicionais e sem falar das questões ambientais. por isso falo e repito , atire a primeira pedra quem nunca passou por isso ,mesmo com uma vasta experiência, ainda continua imprimindo com falhas e teve que fazer tudo de novo , não importa a impressora ou seu conhecimento , vai haver erros e como consequência desperdício de material e gastos com insumos. o que precisamos e começar a pensar sobre esta questão , poxa bem que o filamento deveria ser mais barato ou houvesse o recolhimento dos insumos por parte dos fornecedores principalmente aqueles que deram errado ou sobras que as novas impressoras deixam para fazer peças multicolor e porque não comprar de volta o material , ajudaria a pessoa que comprou e a natureza agradece.

Cool video and a well thought out design but you're too easy on the print quality here. This is definitely not good quality. I've seen way cheaper printers print much cleaner.

bro the waste is insane

creality ender 5 s1 bambu lab a1 arcee aligned rise of Unicron transformers prime arcee movie design creation plastics figure video 🙏🙏🙏🙏

I came here just for the comments on the power cord fiasco. And all the arguments on it. 😂. Poor Vlad should have done a bit of research before putting out this video.

THE FIRE STARTER PRINTER! Buy this if you want to BURN YOUR HOUSE DOWN!

Bambu wants everybody who has an A1 to stop using them until they come up with a fix, if you keep using the A1 you are risking a possible fire hazard which could burn your house down so please stop using this machine until a fix has been done.

For your safety and to prevent further damage to your printer, we kindly request that you cease using the A1 printer for now.

Bambu sucks all it is is speed look at all the a1 recalls what crap

I think I can deal with this beauty just have to validate the ching ching. Btw awesome review and thank you for sharing your experience.👍👍👍

K1c pls

K1c pls

K1c pls