Basic Engine Bay Wiring Harness Routing for the 1967-1972 F100 for

Подписаться 668

Просмотров 6 тыс.

50% 1

After watching ‪@nopartsgarage6691‬ 's latest F100 build video, decided to throw together this little video to help answer one of the questions he had with his '72 F100 project... "Where's all that wiring GO?" Well hope this helps him out a little bit. Wish I had a truck with the dash pulled out and all that to do a better job of showing the under dash areas. This will apply to 1967, 1968, 1969, 1970, 1971, and 1972 F-series F100 F250 and F350.
#olysgarage #1969 #1968 #F100 #Fseries #wiring #harness #bumpside #wiringharness #fordtrucks #ford
Please leave a comment and let me know what you think!
Be sure to LIKE, SHARE, and SUBSCRIBE!!
(I WILL have more content, Sloooowww at editing!)
Also if you want more up-to-date progress or see some of my other projects not on YT, follow me on Instagram: @olysgarage
Email me at: olysgarage@gmail.com

Авто/Мото

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@navidkhalaj9886 Месяц назад

Tank you so much ❤

@OlysGarage Месяц назад

You are very welcome!

@EYE_SPIDER Год назад

Awesome breakdown brotha! Very helpful to see how it’s all laid out!!! I’m jealous e over the perfect looking windshield wiper reservoir Cool video brotha!!!!!

@OlysGarage Год назад

LMAO, dude you gotta keep those AWAY from the headers! HAHAHA!! Think this one was from C&G Ford Parts in California. He sells mostly Dennis Carpenter stuff, no markup. Just ALOT quicker than waiting for the stuff direct from DC. I'm betting LMC Truck carries them too. Gotta GETCHA one! BOOOOOM BROTHA!

@jjsonsspeedshop4962 Год назад

Man that’s a cool pickup. Well done. 👍🏻 You’ve got some nice trucks. 👍🏻

@OlysGarage Год назад

Thanks! The 69 (the one with the engine) I've had since 1999. It's got quite a story to it. One day I will have to do a Voice over Slide show as I had started restoring it some 20 years ago. Of course never finished, but it's always been a runner/driver.

@BubbaAyers1969 Год назад

Wiring… you got to love it… great video 👍

@OlysGarage Год назад

I actually enjoy wiring. (Its a little less dirty!) But if you haven't seen the '55 Ford, I've been rewiring it from scratch from stem to stern. I'm almost done with it.... just got back burner'd for a bit. you know how it goes! Thanks for watching Bubba!

@timwindsor03 Год назад

Awesome video brother. Thanks for sharing. Keep the content coming. Hope you have an incredible weekend. Much love and RESPECT brother

@OlysGarage Год назад

Thanks for Watching! Hope you have a fantastic weekend too, brother! Love and respect back at ya!

@frankmccartrivet_in_f1003 Год назад

Holly crap that little relay is for the horn. You just answered a question that I forgot I had 😂😅

@OlysGarage Год назад

Thats Awesome!!! Ha!!! Love it when my cheesy videos help outs out! Also, that really last I checked was still available over the counter. 😉😁

@RoyMarkosGarageRMG Год назад

Well done video explaining all those details. 👍👍👍

@OlysGarage Год назад

Thanks Roy! I sure do like these trucks. Just wanted to help No Parts Garage with his project so he can get it going. Thanks for watching and commenting!

@RoyMarkosGarageRMG Год назад

@@OlysGarage That’s how we do it! Help each other along.

@VinoRatRodbuilds Год назад

Very cool sharing. Right on.

@OlysGarage Год назад

Thank you VINO! Really appreciate that! Thank you for watching!

@VinoRatRodbuilds Год назад

@@OlysGarage your a awesome utuber fur sure. 👍

@OlysGarage Год назад

@@VinoRatRodbuilds Awwe geeez, that means alot coming from a great and well established You Tuber/Craftsman such as yourself!!! Thank you for the kind words, sir!!!

@BareRoseGarage Год назад

I think Ford was the 1st ones to use "Quick Connectors" on their wiring harness' and it makes it "easy" to label & pull it all in 1 piece to lay it all out on the floor. When I start a Re-Wire I grab a roll of cheap masking tape & a Sharpie and start disconnecting & labeling EVERYTHING. Good video man!

@OlysGarage Год назад

Yessir! i do the same thing. Back when i put the truck back together, i was still learning. Was 21 or 22 when it became my daily for a few years. Its funny to go back into something you did two decades ago and think to yourself.....why didn't I do this? Or why did i do that?? Hahaha I haven't really worked on any early GM or Chrysler stuff to know how they did their connections. Ford started using the individual bullet terminals in the 40's I believe. Of course there wasn't much for wiring in them back then anyways!

@BareRoseGarage Год назад

@@OlysGarage Oh man, I hear ya there... lol.

@Taco_Syndicate Год назад

Under the hood looks good!

@OlysGarage Год назад

It use to be REALLY nice. It has been kinda neglected over the last 10-12 years... but has fared well for not having much maintenance over the last decade! Life has a way of keeping one busy from some projects! Thanks for watching!

@DesertRatFabrication Год назад

Hey Dano, that was nice of you to show the wiring, you are becoming one of my best Ford friends on RU-vid, lol, oh and I got your stickers, I will do a sticker video pretty soon, have a fantastic week my friend and catch you soon

@OlysGarage Год назад

You very welcome, buddy! Not many of Ford guys in the sea of Chevy dudes, even on RU-vid! But I appreciate them all. 😁 I've been slacking too. Got some mail call stuff to do too aswell! Hit me back with one of yours too! Stay safe out there and if I don't talk to ya sooner, have a Happy Thanksgiving!

@DesertRatFabrication Год назад

@@OlysGarage I sent you my stickers the same day I received yours

@OlysGarage Год назад

@@DesertRatFabrication awesome! Got me a little bit of a sticker wall thing in the works. Should be pretty cool!

@DesertRatFabrication Год назад

@@OlysGarage looking forward to that, yeah I sent you a couple of mine to your PO Box, I will do a sticker video pretty soon, have a fantastic day & Thanksgiving Dan

@RobertsGarage Год назад

👍

@OlysGarage Год назад

👌🤘

@nopartsgarage6691 Год назад

OLY thanks buddy. I see the wiring I have is a little bit different. I didn't see your ignition module. I pretty much know where most of those were bolted down tho. I have one plug left to figure out and I think it must be for the tail light wiring. . The plug is about 1 1/2 inches wide and maybe 3 inches long. No sure on exact measurements. When I first seen it I thought cab wiring block or something. It's not tho. Thanks for the video. I appreciate it.

@OlysGarage Год назад

No problem! Kept delaying on getting it out to ya with other crap popping up so sorry it was a bit of a delay from your video. They didn't use ignition modules until 1973 (Duraspark I) and trucks didn't see them until '75 I believe, which would have been the more common Duraspark II. Not a huge deal as people do add in the Duraspark into earlier trucks especially on engine swaps. Your '72 would have originally just had a single 'resistor wire' that went straight to the coil. (dropping voltage to 6-7 volts) If you send me a picture of the plug (Email or on Instagram) and even wire colors, I could probably tell ya exactly where it goes or to what for.

@cmintsurfer Год назад

I also had a 67 and a 68. There were plenty of differences. I know why I let the 68 go but I must have been brain-dead when I sold the 67.

@OlysGarage Год назад

You are very right! Lots of little detail differences most may or may not know. Ford is well known for integrating previous year parts to exhaust inventory on new model runs. More Ford idiosyncrasies... lol

@DesertRatFabrication Год назад

Hey Dano, I’m sure that was a big help, wow that video was super clear what are you filming with

@OlysGarage Год назад

Hey Mike!!! Thanks! That was filmed with my GoPro Hero8 Black. And yes quite a difference in quality compared to my older shot videos, which were done with an old GoPro Hero+. Audio is much clearer in the Hero8 too. Not cheap, but worth it for the quality in my opinion! Hope all is well!

@frankmccartrivet_in_f1003 Год назад

My 73 has an anti theft dummy harness. It is under the steering wheel and is a Hopkins style (for utility trailer)flat four prong connector that one side just does a factory looking loop to its self. You unhook the wires from the starter which has the same connector, then plug it into the dummy connector and it just looks like a wire for a trailer brake hanging down and the truck will no longer have juice.

@OlysGarage Год назад

Thats interesting. Was it specifically designed for the 73-77 trucks? I've been trying to figure out a clean and minimal disturbance of wiring way, to put some kind of anti theft on my 78. Just hate hacking into the wiring. I like the dummy setup though. But honestly, power jumped from battery to coil, screwdriver across the solenoid...and boom its gone. Hence chained and padlocks hoods on a lot of Fords. Lately I've been pulling the coil wire and battery terms and just not driving it. Which sucks, but as many vehicles that are getting stolen around here these days I don't want to take it anywhere! The later duraspark slows them down but anything with points or pertronix will certainly be gone if they are 'in the know..'

@frankmccartrivet_in_f1003 Год назад

I’ll send a picture

@frankmccartrivet_in_f1003 Год назад

@@OlysGarage I discovered what it was when I thought it Was a trailer hook up and tried to use it.

@Dancing_Alone_wRentals Год назад

Great video. What is over the fence at 9:09? I thought I saw Robert's lighting up a BBQ next to the camper?

@Dancing_Alone_wRentals Год назад

That should read , What cool stuff is over the fence? I got sad and distracted when I was writing cause Robert's said " Yeah When Spiders fly" after I asked if I could get a cheeseburger.

@nopartsgarage6691 Год назад

I thought I seen him too. Hahaha

@OlysGarage Год назад

Well.... lets just say you could film one heck of an episode of "Hoarders" next door at the neighbors place. He grew up on a rural Idaho farm..... and well, they like to save stuff... all of it. LOL. Super nice guy, and always helpful. His place doesn't bother me, just makes mine look that much better! 🤣

@Dancing_Alone_wRentals Год назад

@@OlysGarage Hmmm, He probably didn't even notice Robert's catching some z's over there. Wonder if the smell of the BBQ catches his attention.

@OlysGarage Год назад

@@Dancing_Alone_wRentals i dunno, but it sure would catch mine!!!!

@JoeMorris-d4i 28 дней назад

What is the green with red striped wire on the passenger side used for .? I have a 67 f100

@OlysGarage 28 дней назад

So that wire Green w/red stripe should connect to the "I" terminal of your voltage regulator. It comes from the idiot light (charging system warning light) on the dash which is then powered buy the ignition switch through the idiot light. It excites the regulator/alternator. Is or has your charging system been working?

@roberteast4160 Год назад

Help me please!!!! I have my dad's old 1970 f100. My truck has some electrical issues.over by the starter solenoid. My truck has two plugs ,one is two wires and the second has three. Third has big black wire with a yellow stripe,a small yellow,then a red. No info on any site about the second harness. Also can you tell me what the wiring on the alternator goes? After two weeks this is driving me nuts.

@OlysGarage Год назад

Yes! First, can you take pictures and email them to me. Pics says much more than words in most cases. Should be able to help you sort this out. Email- Olysgarage@gmail.com I'll be home in a few hours to check.

@OlysGarage Год назад

You're gonna have to give me some pictures, or more detailed descriptions of the plugs and wires with their colors and where you can see that they run to or from.

@roberteast4160 Год назад

Let me know if you got the pictures. Yellow wire on the 3 wire plug . Goes into cab, but not sure on the other side

@OlysGarage Год назад

@@roberteast4160 I didn't get any pictures. Check the spam folders and all. Nothing. Would be helpful to see these connectors. So generally speaking, the large gauge black w/yel stripe wire is power for the cab essentially. It powers up the ignition switch, fuse block and turn signal switch. As for the red, does it have a stripe? There's a couple different reds that run down that side, one one is with a blue stripe, That one goes to the "S" terminal on the starter solenoid. What's throwing me off is you're sayin it's a 3 wore plug you're searching for. I only recall 2 prong or 4 prong connectors at that time. Try again with the email: olysgarage@gmail.com

@roberteast4160 Год назад

Issues with my phone. I resent them. Need to know we the yellow wire goes to the engine side of it.

@Chilly2Shiesty 5 месяцев назад

Do you need to remove the engine to rewire?

@OlysGarage 5 месяцев назад

No not at all. Actually rather prefer to have it installed, especially if you're doing custom things with it or adding in more non-factory items. The dash is the area that becomes the hardest, and helps to have much of it removed for access.

@SamuelSoto17 Год назад

My 72 Ford F-250 missing the wires connecting to brake switch at break pedal.. do you know what wires are connected to brake switch? Is it red and red with black tracer wire?

@OlysGarage Год назад

Yep, those are the colors! Same for all 67-72 and really, pretty much most Fords. Red being hot it should pull from a shared terminal with a Red/white Tracer on the emergency flasher. The Red /Black Tracer should go back to the Turn signal switch. Hope this helps!

@Dancing_Alone_wRentals Год назад

7:37 Well you would not have to lock things up if Wood & Metal and 615 would stop sneaking into your beverage hide out, while you are at work.

@OlysGarage Год назад

I think if they did they MIGHT be kinda disappointed...... hahahaha!

@Dancing_Alone_wRentals Год назад

@@OlysGarage Well, if nothing else, they would get a pretty penny just by selling the aluminum empties.

@OlysGarage Год назад

@@Dancing_Alone_wRentals hey now.... How do you think I FUND this high-end operation around here.... 🤣