Basic usage of the Raspberry Pi GPIO pins 

Loving your from-the-ground-up approach: great for learning how actually to build on the Pi. Hope you’ll make this a series.

Eyyy loved the video. Please continue and make this a series

Most clear coding example I've seen for the RPi. Definitely more RPi videos please I recently fell into the RPi rabbit hole.

This was brilliant E-Man, thank you. Looking forward to much more raspberry pi videos especially when coding using Python and the RPi's GPIO pins. I simply love tinkering with these SBC.

Great instructional video! I've watch many videos on very similar functions, but the way you explain each function, while showing the dual view (well, tri-view), made each step easy to follow. You've taken the fear out of programming. Thank you and keep it up!

Would love you to continue this series for sure my man!

Thank you, always love videos about Raspberries

That's a great tutorial, thank you. Please make more on this exact topic and more advanced physical projects. Thanks!

Great video, I learned a lot thanks to you. I love the RPi and look forward to seeing the next videos you make about it. Cheers

hope that this becomes a series! keep up the great work...

I was going to do a RPi project this summer that involves 7-segment displays. These are really helpful, hope you do more.

Definitely more RP videos! Or even some basic electronics could be interesting :)

This was super useful as someone that knows how to program + a little circuit knowledge. If you do more like this, hooking up a motor to a similar event would be cool.

Setting up a circuit to add to outdoor motion lights when one catches motion, it turns them all on. This was a perfect tutorial to get the basics I needed of using GPIO to detect input. Thanks.

Extremely helpful, I got all the information I needed, thank you so much!

Whats up man, I like this raspberry video, thank you so much!

I'd like to see more videos like this one, too. Thank You!

thanks for the videos bro, looking forward to more pi gpio tutorials

Excellent hello world here. I’ve done Pic and Arduino now for decades, just got a Pi, just needed this to figure out where to start.

You just gave me one more reason to start learning Python. Especially since I already have two Raspberry PIs that I switch back and forth between different projects (mainly retro gaming, music and video streaming).

This is the first video I’ve seen of yours but it’s certainly not the last. Everything explained thorough but succinctly without any waffle.

This video is exactly what I was looking for. Thanks.

This is sweet. Especially love that the code is in python. Please make more.

Only recently started with a RaspberryPi Zero, so would love to see more videos.

First time I've seen (what seems obvious) the use of an ide cable with a pi... Nice! And Clean!

Very helpful video - I'd like to see more.

Great video, and a raspberry pi series would be awesome!

man great video! keep it up PLEASE!

So good mate, keep the Raspberrypi vids coming I say!

Perfect tutorial to get started with gpio!! Thanks

Thank You, I'm trying to learn this!

Super good! please more!

Thanks Engineering Man!

More raspberry pie stuff would be awesome to see!

Great video! Just a small comment - It doesn’t matter where you put the resistor. It can be either on negative or positive side of the LED. It will still limit the current that goes through.

Awesome video! More please.

Thank you, very useful video!

Great introduction!

Thank you! More please!

Extremely helpful video

i subscribe because this channel can teach me on raspberry pi as what it was.

This was awesome manx

Loved the video!

Great video! I would like to see more RPi projects. This was a great warm-up to show how simple and powerful an RPi can be with just a little coding experience. I always thought a gun RPi project would be modifying an old garage door opener to a "smart" garage for opener with a RPi Zero. What do you think?

Awesome video. This is a great channel.

Good and complete video about RP GPIO manage, hope you may make a video using RP with hardware interrupts like we can make with microprocessors (INT), thanks!

Would like more raspberry pi videos. Thanks!

Awesome video. I'd love to see more Arduino and Raspberry Pi projects in the future.

thank you its really helpful

Great Video

Nice explanation.keep it up

I like your videos before watching them

super helpful

R Pi uses round the house would be a good vid

nice video! keep it up!

Yes, do some more Raspberry Pi videos!

Love the video by the way.

Great video, would love to see some python pi and sensor stuff

nice vedio! great explanation.

Great intro, can you possibly do something with reading data from an input such as a temperature sensor, movement detector etc?

Superb.... Please do more raspberry pi video's

Fuck.. now I need a breadboard.. seriously I've been to microcenter so many times this week! Thanks for the video

Keep showing the RPi stuff!

Your the best, im new to this and was understanderbly clear, cheers from down under Australia, can you maybe do tutorials using all the gadgets? How to go to install programs for your shields and install things through terminal onto Raspian so many people just assume because you have a Pi your and expert, but im just making the change over and people can be so arogant i cant see why people give up and run back to windows and never look back and hate the linux community or open source community. But you were very good going step by step and explaining why each step is like it and what piece does what and why this command command does that and if if you dont sceanario. New Subscriber

Please more pi videos!

Cool vid! Quick question. Could you use a variable, like the led_on variable, to set the GPIO state instead of GPIO.HIGH/LOW? This would eliminate the need for the if..else statement in the switch function (I could test this myself, but others might be interested).

Keep them coming! Worked with Pic Micro and Arduino but just getting into Pi. Where did you write the code and where did you execute it?

More Raspberry PI Videos please!

Random pixelization at the top side of your PiJuice makes it appear to letting out the magic smoke.

Thanks.

I soo Love my Raspberry Pi 4b.💙

One thing that I would be interested to see is actually a step further towards the "basics" and have demonstrate how to launch code on a PI. That, but also I would be super interested to see about things that you can do with a RaspberryPi that you can't do with something like an Arduino.

nice video

Really nice video, Questions, I'd like to connect to Pi & run python remotely, what kind of editor you recommend for Python (Windows app?)? I saw you mounted some drive or network drive, can you explain what working environment you have?

Clarified the BCM and Board setting...had me for a day trying to figure if the outputs were set right in the program..

Very Kewl!

are the pins the holes on the pcb or is it the little metal prongs that go through the holes? Also can you solder wires to get info/energy from the holes?

How would you convert an audio file into dsd to be played back through the PWM methods in this video? PDM is basically the same as PWM but instead of modulating the pulsewidth via time, it’s by keeping it on or off over clock cycles at a really high clock speed. All you would need is a capacitor to filter the high end. Would it be possible to use all the GPIO pins to output this kind of signal?

Do you have a script when the button is pressed it calls not for an LED but rather a shell script/file? Is the ‘callback’ would be the call for my script.

Hey, I plan to use Raspberry as a NAS using OpenMediaVault and I want it to act as a microcontroller to control some of my projects (on Arduino at this point, but my goal is to control them through PI's GPIO pins). How can I achieve both of those goals? Open Media Vault works in headless mode, no monitor and gui, everything controlled from other PC connected to the same network. Do you have any clues? Controlling GPIO in headless mode similar to microcontroller like Arduino or menaging Open Media Vault in normal Raspbian or something

How would I simulate a button press from another Pi? In other words, taking your example in this video, instead of having the physical button you had jumpers from another Pi. How would you define the GPIO pins in software for both Pi's? My idea is to use a WiFi enabled Pico W to trigger a button press on a 3B+ running Fruitbox (Jukebox software). I would then be able to use my phone's browser to control some aspects of it.

I’m yet to find a decent button which one did you use

What program are you using to do this for the raspberry pi?

Can you do some on OS Raspberry Pi cluster moving ICE is simple and easy cluster and thank you

Does the resistor have to be on the positive side coming in?

Do an apdated version of this.

Great intro - now how do I do it in C? I assume it's trivial, but could use a simple example like you've done here for python!

Super new to raspberry and arduino. Which IDE are you using?

More pie please.

hi man, i must do the same thing using forth, any tips?

Is it in any way possible to utilise the GPIO pins of a Raspberry Pi that is running a Home Assistant instance? IE to connect to the sensors of an old home alarm system.

How can you edit python remotely, what do you use?

Yum, more Pi please 8-) Or perhaps micropython on the ESP8266

what switch did you use ?

I do not believe it matters which side you put the resistor on a LED

What if it's not blinking? I can't measure voltage at the GPIO.

Anyone got epoll to work with Buster? i use JS and seems its borked.

I am in need of some coding help, I want time.sleeep(X) and I need X to be taken from another file. I am then going to have that file IE: input.txt have its values inside change from a php script\website. no one has been able to tell me how to do this.

Are the GPIOs same for raspberry pi 3 and 4?

Can‘t you change the voltage of the gpio output ?