Battery Cell Balancing and State of Charge (SOC) Estimation

Подписаться 516 тыс.

Просмотров 53 тыс.

50% 1

Explore battery pack electro-thermal modeling and simulation. In this video, you will learn to:
- List the tasks of a battery management system.
- Identify how Simulink® can model the physical plant and controller for the battery pack and its balancing circuit and provide results in terms of the electrical and thermal behavior.
- Use one of the nonlinear observer blocks from the controls library to keep track of the state of charge of a cell.
Download model files: bit.ly/2KFSjfN
Join the Power Electronics Control Community: bit.ly/2ZY7NCq
--------------------------------------------------------------------------------------------------------
Get a free product Trial: goo.gl/ZHFb5u
Learn more about MATLAB: goo.gl/8QV7ZZ
Learn more about Simulink: goo.gl/nqnbLe
See What's new in MATLAB and Simulink: goo.gl/pgGtod
© 2019 The MathWorks, Inc. MATLAB and Simulink are registered
trademarks of The MathWorks, Inc.
See www.mathworks.com/trademarks for a list of additional trademarks. Other product or brand names may be trademarks or registered trademarks of their respective holders.

Наука

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@elec3phi 4 года назад

Perfectly what I was looking for. Thank you.

@shadwalsingh6789 3 года назад

the model files .slx are not accessible, can you please share them via link directly especially for SOC estimation

@KMKZ-oq6tb 3 года назад

I have a strange problem on my ebike battery pack 60v 32ah 16s11p panadonic 18650 i forget my key and the headlight stay on for few day it completly drain the batrery like very dead now when i charge it my charger stop at 75% and only do 64v total instead 67.2v. I suspect i have some cell out of balance and bms not bring them coorectly and all my other cell are full...... Also when i discharge now on battery meter it will read like im 10% left and in fact i read 55v+ whit voltmeter it like my bms read the low battery and give me % anyway i need help to fix this battery pack it almost new and cost me 2000$

@markamores143 4 года назад

Can i use 9 18650 batteries woth different amphere but using bms?

@wooferhound7571 4 года назад

I would not recommend it. They will drift out of balance rather quickly if they are not closely matched.

@vtorsi610 3 года назад

@@wooferhound7571 What you claim is FALSE! A BMS that does a Top Balance of the cells, works just fine. Start with all cells at Top Balance, then use ( discharge ) the pack until the weakest cell hits the lowest allowed voltage, then recharge the pack and the BMS will Top Balance all cells again. All cells will return to the max upper voltage = NO DRIFT ! ... Repeat over and over and over ... Mixed capacity just wastes the capacity of the largest cells. All 18650 cells have different capacity.

@shinosg-wiz4619 3 года назад

Should the weakest cells grouped together or mixed/coupled with three strongest to even the system out?

@bandarnes 3 года назад

No.Always group cells of similar capacities

@shinosg-wiz4619 3 года назад

@@bandarnes thanks. I'm a bit confused though. A diy powerwall made buy a famous RU-vid was made out of recycled 18650. He mixed the weakest with the strongest to even out each module of the powerwall. Why?