Тёмный

Baudis GP15 JETA / GP Racer overview & maiden flight with Jetec E-80 

RC Aviation Adventures
Подписаться 251
Просмотров 9 тыс.
50% 1

I thought it'd be useful to some people out there if I made a video that covered some of the aspects of the Baudis GP15 JETA scale moulded glider. There is lots to say about this model but I've covered some of the main bits of info. I was missing when it came to putting the model together and taking it out for its maiden flight.
This is the standard carbon layup 160g carbon / herex / 50g glass. The colour is a white with a custom grey wing decoration to match the fuselage decals. I ordered the GP Racer / GP15 combo which means I got two 1st rate models for an excellent price as they share the same wings. I decided to go with the Jetec E-80 in the GP15 and left the GP Racer as a pure glider. The GP Racer as a pure glider is absolutely excellent and somewhat overlooked as an absolutely awesome model in its own right. I'm really glad I got them both!
If you have any questions or if you'd like me to cover any other aspects of this model then please let me know in the comments and I'll get back to you. There is lots more to say, but I hope you find this video useful.
The build uses the following electronics:
Mig Flight Jetec E-80 (www.migflight.de/produkte/e-80/)
Jeti Mezon 160 Lite
Jeti REX10 ASSIST and 900NG
Jeti DSM ESC Dual Switch Mixer
x6 MKS 6130 servos on flaps, ailerons, elevator and rudder Mig Flight Jetec E-80
x1 Hi-Tec HS-5585MH for ducted fan retract
Baudis GP15 - www.baudismodel.com/en/produc...
YOWOO Graphene Battery 6S 22.2V 4000mAh 100C - www.amazon.co.uk/gp/product/B...
All Jeti running gear from Jeti UK - esoaringgadgets.co.uk
00:00 Introduction
01:34 Electronics
05:40 Jetec and ESC
08:00 CG and Ballast
09:45 Servos
12:22 Transmitter setup and programming
17:43 Wing loadings
20:48 Winglets and LDS
22:51 Flight characteristics
24:46 Overview and final thoughts

Хобби

Опубликовано:

 

6 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@49er701
@49er701 Год назад
Great video - you communicate lots of information. I think that comes from knowing your subject.
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Thanks Andrew 👍
@darrylChanin
@darrylChanin Год назад
yes, please do the same on the Skywalker XL ;-)
@leightolson89
@leightolson89 Год назад
Great review dude ... I'm glad you like the GP15 👍
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Cheers man. I love the combo for sure. Very different to the SW! Hope to catch you on a ridge soon ;)
@leightolson89
@leightolson89 Год назад
@@rcaviationadventures7698 Yes for sure!.. and an utterly diff flying experience than the SW 👍
@rc_glider_and_more
@rc_glider_and_more Год назад
Thank you for your content. Very Good Video and Review.
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
You’re welcome bud, thanks a lot for the comment 👍
@f3fisa
@f3fisa Год назад
I have a double carbon GP15 with FES and a GP Racer fuselage. I disagree with you about landing. I find it one of my easier planes to land. In your video you show your landing flap at about 40 degrees, but later on the flaps go down almost 90 degrees. This is how I have mine and it makes a huge difference. Also I suggest you try having the ailerons on the inboard flaps only work when you move the aileron stick above half travel. It means you get full ailerons when you need it, but most of the time only the ailerons move. I also have a 3.8m Skywalker, so look forward to your review of it.
@pilotmiami1
@pilotmiami1 Год назад
Bravo.Thenks
@tortugaF3J
@tortugaF3J Год назад
nice Video, well done review/overview. Flying Video of "GP RACER" would be fine & further Skywalker XL videos. Thanx.
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Thanks a lot. I’ll definitely get to the Racer and the Skywalker comb in that case 👍
@atomicbonds6790
@atomicbonds6790 Год назад
Hello! You've done a real service for people like me that are interested in purchasing this model. I'm sold on the Jetec 80 install that's offered by Baudis. I noticed that you did not include landing gear in your model. May I ask why?
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Sorry for not replying sooner! I only fly from slope, not flat field, so there was no need to add the extra weight for me. If I were aero towing or launching and landing from flat fields I'd have included the gear.
@user-it8mt3zg9f
@user-it8mt3zg9f 6 месяцев назад
OP, I hope you're alive and well since this is the last video you've uploaded. I was wondering what sort of problems you encountered with the idea of mounting the ESC to the forward part of the bulkhead/jetec 80? One other question...does the size of the opening for the Jetec concern you as a point of structural failure?
@rcaviationadventures7698
@rcaviationadventures7698 4 месяца назад
Hi there. I've not had any issues at all. The ESC is mounted to the side of the fuselage, behind the bulkhead. Cooling seems fine and the Jetec retracts with a small amount of clearance between the fan casing and the top of the ESC. I can see how the size of the opening could be a structural concern, but again, I've not had any problems with this. I have only had one 'heavier' landing and I did not have an issue - thankfully! Saying that, a buddy of mine did have a bad landing that caused a small fracture behind the fan opening. There was more damage to other parts of the model so I would not say the opening is any more vulnerable than any other part of the airframe. Overall I find the build quality to be superb. I hope this helps!
@craiglaird3752
@craiglaird3752 4 месяца назад
Hi, awesome video. Can you please share what ESC did you use?
@rcaviationadventures7698
@rcaviationadventures7698 4 месяца назад
Thanks. I use a Jeti Mezon 160 Lite with the Jetec. It pulls about 140A with the throttle wide open. The ESC runs into a Jeti DSM ESC with a Jeti Power-ion RB 3100 to provide some battery redundancy 👍
@Ludovic07g
@Ludovic07g Год назад
Dear, I'm not confident in my English... If I understand well, according to what you have said the GP Racer is closed to the Skywalker 3.8? I own a SW and was interested in the GP Racer... If you can confirm that the performance of these 2 gliders are very similar? Thank you for your video
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Hi there, thanks for the comment. I've flown the GP Racer for a while now it has quickly become my favourite glider. The 3.8 Skywalker is fantastic but the Racer can fly in much calmer conditions and finds lift very well. The GP Racer wing seem is a little more suited to finding thermals and I would say is more efficient than the Skywalker. I tend to fly the Skywalker in stronger winds now, and the GP Racer for pretty much everything else. I still love them both, but the Racer really suits my flying style. It's a superb glider. I now fly the Racer more than any other model I have, but I prefer to fly in calmer conditions where the lift is a little more scarce. I hope this helps.
@johnvella5834
@johnvella5834 Год назад
Your mix of roll with the flaps seems too excessive. On the full size it is about 40% mix and works well on my 6m ASH 26. Very nice model.
@philltadman
@philltadman Год назад
Excellent! Is that Pole Cottage?
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Thanks Philip, the maiden was in the Brecon Beacons. I live down the south west but I do hope to get up to the Long Mynd at some point 👍
@fragnix2k
@fragnix2k Год назад
If you do your wiring like this the wires of the motor will brake in short time because they are not flexibel, also if the wire move at the soldering point of the esc it will break also - this is dangerous - please dont do it like this
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
Thanks for the comment. I really had trouble with the wiring because they leads are not long at all. I'd love to see how others do it. Maybe the leads need extending a bit, but I am reluctant to do so.
@Ra_dio_Iberico_ea4ggc
@Ra_dio_Iberico_ea4ggc Год назад
Buen avión, Mucho Lastre y Poco Control, de Altura,Velocidad y Telemetría TODO AFECTA La Emisora Yeti es de las Mejores, y También de las mas Caras... Yo tengo una FrSkis X20 Ethos y Funciona igual de Bien (Es mas Barata) Pero es Made in China y otro Detallado, Mis Receptores Son Estabilizados con Giróscopos Electrónicos Ajustables (MUY IMPORTANTE, para tener +/- Mando en las Superficies o Aletas) En Cuanto al Motor Fan (Nada que Añadir, Solo que yo NO LO PONDRÍA Así) Yo lo habría puesto, en una Hélice Plegable y en el Morro. Lo VEO Un Avión de LUJO y Tan Eficaz Como otro Cualquiera, Solo que, Cuando lo Vuelas Te Sientes Como La NASA en Florida Despegando el Columbia, Un Secreto, "Hay que ir a lo Practico y Barato". Que lo disfrutes.
@creepinonthebabes
@creepinonthebabes Год назад
what radio is that?
@rcaviationadventures7698
@rcaviationadventures7698 Год назад
This is a Jeti DS-16 mk2 NG 👍
@tubbs191158
@tubbs191158 9 месяцев назад
just watched you gp video , all be it a year ago , im well interested in purchasing can i contact yourself direct
@rcaviationadventures7698
@rcaviationadventures7698 9 месяцев назад
Yes please do. You can contact me on my website rcaviationadventures.co.uk
Далее
How to find thermals, Speedster style
10:54
Просмотров 19 тыс.
GP15 JETA - 400 m vertical
2:42
Просмотров 43 тыс.
GP15 JETEC80
4:32
Просмотров 311
ASW22 RC glider
3:59
Просмотров 4,2 тыс.
Baudis GP15 on the field
3:08
Просмотров 1,2 тыс.
Baudis Skywalker 3.8 setting
1:48
Просмотров 1,9 тыс.
GP 15 JETA promo video
4:18
Просмотров 23 тыс.
Explorer BF F5J - aileron servo and IDS installation
2:03:02
Jeta Renewable
4:31
Просмотров 838
Survive 100 Days In Nuclear Bunker, Win $500,000
32:21