No video :(

Be Quiet! Noise, Hum, Gates & Suppressors - That Pedal Show

Подписаться 397 тыс.

Просмотров 256 тыс.

50% 1

Welcome to That Pedal Show! Please subscribe to our channel and visit our store www.thatpedalshowstore.com
Life too short for long RU-vid videos? Please see the ‘Interesting bits and go-to sections’ information below.
Are you buzzing, hissing or humming? Well, enough about Saturday night/Sunday morning and on to this week’s show. Groan.
Regular viewers will know that Dan and I are not big fans of noise gates and suppressors… for reasons on which we expand in this episode. However there does come a point where it can be appropriate to use one, so we discuss the causes of noise, potential remedies and solutions before exploring when and where you might wish to bring in some technological, pedal-shaped help.
Do we run through all the commonly available noise gates and suppressors on the market? No. And we never will, but we do offer some food for thought if you //think// you might need one.
Please enjoy the episode…
Pedals in this episode…
• TheGigRig Three2One
www.thegigrig.com/three2one
• D’Addario Pedal Tuner
UK & Europe: bit.ly/2tIN4lD
USA: bit.ly/3IRrhPE
Australia: bit.ly/2tfHqHN
• Laney Black Customs TI Boost
UK & Europe: bit.ly/2Ip9fVb
USA: bit.ly/3m3UBcc
• Ibanez Tube Screamer Mini
UK & Europe: bit.ly/2dRVXa2
USA: imp.i114863.net/mM4KX
• Amp Tweaker Tight Metal Pro - no longer made, links to latest version
UK & Europe: bit.ly/3JM8bet
USA: bit.ly/337KsV0
• Walrus Audio ARP-87 Multi-Function Delay
UK: bit.ly/2khFrA2
USA: bit.ly/3s5wr4J
Australia: bit.ly/2xXMsvF
• TC Electronic Sentry
UK & Europe: bit.ly/2Lcwa7X
USA: imp.i114863.net/rMEKR
Australia: bit.ly/2JfKQBv
• Boss NS-2 Noise Suppressor
UK & Europe: bit.ly/2NJLafe
USA: bit.ly/33uw6yp
Australia: bit.ly/2NJt1xS
• TheGigRig G2
www.thegigrig.com/g2
Interesting bits and go-to sections…
- Intro playing: 0:00
- What are we doing today? 0:54
- The bigger question: 1:20
- Today’s amps: 2:02
- Amptweaker Tight Metal Pro and the Strymon Big Sky - noisy! 5:35
- Death to the daisy chain! 6:45
- Clean power is the MOST important thing: 8:50
- Goodbye daisy chain, hello isolated power: 9:47
- When gain adds noise: 12:30
- Pickups, hum and strategies for coping: 16:35
- Humbuckers. Bucking hum: 22:25
- The problem of high gain and noise: 29:25
- But I want loads of gain! 31:35
- Time for a gate or suppressor. But only now: 33:50
- Gate or suppressor? 34:25
- TC Electronic Sentry: 37:50
- Tight Metal Pro noise gate: 45:27
- Boss NS-2 Noise Suppressor: 47:58
- What about other loop effects? 53:20
- Why not just forget about all that other stuff except the noise gate? 56:30
- General conclusions and observations, long-winded windbags that we are! 58:20
- The stank face and Mick’s power supply story: 59:05
Guitars in this episode:
• Fender Custom Shop 1952 Telecaster - watch Dan’s video at bit.ly/2Hlpy5Y
• Gibson Memphis 1958 ES-335 - no video yet
• Collings 290 DCS - watch Mick’s video at bit.ly/2dDG96k
Amps in this episode
• Victory V30 The Countess MkII with V212-VH (1 x Celestion Vintage 30, 1 x Celestion G12H Anniversary)
UK & Europe: bit.ly/2Dh1f7Y
• Marshall 1987x with 1960AX cabinet with 4 x 12-inch Celestion G12M Greenback speakers
UK & Europe: bit.ly/31eVWmc
USA That Pedal Shop: bit.ly/3v3Xazc
We hope you enjoy this episode. Please subscribe to our channel.
You may even want to buy a T-shirt to support our efforts www.thatpedalshowstore.com
We are also on Patreon - crowdfunding for creatives
/ thatpedalshow
Please visit our preferred retailers!
UK & Europe: Andertons Music bit.ly/2cRvIvt
Australia: Pedal Empire bit.ly/2mWmJQf
USA: That Pedal Shop www.thatpedalshop.com/

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@guitarfreak585 6 лет назад

There's a T shirt for you. "With great power, comes great isolation."

@eldestroyo13 6 лет назад

CodyMBB I would buy at least two of those shirts.

@danadrian2752 4 года назад

Not sure how well this comment aged

@louifroiamusic 2 года назад

@@danadrian2752 Very Badly hahahahahahahahah

@just.off.the.a4208 2 года назад

@@danadrian2752 🤣🤣🤣

@relevantinformation6655 Год назад

Excellent 🤣👍👍

@theshitheads3178 4 года назад

This is funny. You don't need a noise gate! *constant noise throughout the entire video*

@CalanReichel 3 месяца назад

These deaf boys can't hear the CONSTANT noise

@risteardohaodha23 2 года назад

Getting the Boss NS-2 installed on my board has been a game changer (all my gain pedals going through the NS-2 loop). I'm working with a singer who is sensitive to amp noise and this is a great solution as well as helping in with the textured ambient playing I like to indulge in at home. Even playing in a regular reggae band, it works a treat. Every now and then I switch the NS-2 off to see what its doing and wow the noise is loud, and definitely not missed. And it's important to note, when you are playing the amp hum and the noise of the single coils are fully there in the sound, so nothing is lost. Many thanks as always TPS for a great overview and information!

@linasandoval1062 7 месяцев назад

Hi, how do you set all your gain pedas through the NS-2 loop?

@eranmontiel 6 лет назад

Every Time I feel like I have a handle on guitar info, you guys come along and show me I know nothing. Asymetrically wound? I had no idea that was a thing! I used to think I hated learning. You both have showed me that while I HATED school, I absolutely love learning. Cheers gents. Never stop.

@ThatPedalShow 6 лет назад

Ah that’s awesome Eran :)))

@lrmars 6 лет назад

Let's cut right to it...it's time for a new Grammy category and time for these two fellows to be recognized for the sheer body of and value of the work they have done...! Talent...this is as good as it gets. EXCELLENT as usual!

@colaboytje 6 лет назад

Larry Marseglia I fully agree. Best guitar gear show. I have learned so much in a short (and in guitar universe, a few years is short) period for absolutely free. Not 1 shop will take the time to explain even 5% of what these amazing guys do. This show deserves so much more subscribers. Now I'm going to order the TPS shirt Mick is wearing. Thank you so much guys!

@OriginEffectsUK 6 лет назад

This is going to be such a useful episode for so many players out there. We get emails every week from people asking about how to rid noise from their systems so I'll be pointing a lot of folks to this video. I like Mick's point about single-coil hum being a part of that guitar's sound.

@ronnieeagleandthealchemist2333 6 лет назад

For a time I thought the buzz from my amp was a power supply issue. Nope. It was the effects loop of Marshall JCM and an ESP noise suppressor did the trick. For high gain patches, I need to loop in a TCE Sentry to kill the bad frequencies that come up in the gain. To know all that hiss, crackle and buzz is not there anymore does make your tone cleaner, more palatable. It's subtle, but its there particular the higher volumes you go.

@EverettDudgeon138 6 лет назад

I think the issue is less to do with the single coils themselves but the hum that’s increased when it’s run through pedals and amplified. I use both your SlideRig and Cali76 pedals..the larger format versions. Running a SlideRig into a wah into a Fuzz and into my modulation pedals. All that with my Strat (even with noiseless pickups) sounds incredibly noisy and as such I’ve struggled to record using that setup. I’ve just been using my Roger Linn Andrenalinn iii pedal and just going direct. I really don’t think the argument of “its part of the guitar’s sound” is practical when you are trying to get the best guitar sound in a home recording sense.

@EverettDudgeon138 6 лет назад

I would say the ISP Decimator G String is the best noise suppressor/gate on the market today. For me it's not so much a problem with the guitar itself, like I said I have noiseless pickups in my Elite Stratocaster but soon as I run it through my SlideRig and into a Fuzz it's noise city. Living with the noise or accepting it as part of the guitar's sound is a bogus argument. It may be all well and good in a live setting or if you are in a punk or Grindcore band but it's not realistic when you are laying down a guitar part in a score for a motion picture or when it's so noticeable in the mix to the point where it's distracting.

@EverettDudgeon138 6 лет назад

Well man at the end of the day you get what you can afford. Unfortunately top quality stuff is priced accordingly.

@EverettDudgeon138 6 лет назад

Like I said...get what you can afford.

@Dave_Sacca 6 лет назад

Dan, hearing you play Raining Blood made my morning. Also, I was surprised that white Ibanez Jem didn't make an appearance.

@davedavem 6 лет назад

I always wear a tinfoil hat when I play guitar. Perfect for that electromagnetic interference.

@heatherwade2373 3 года назад

This is the correct answer.

@BigMagnumims 3 года назад

Saved my time on this video. Id rather buy a noise supressor than watch this hour long video :D

@joeyhays5503 Месяц назад

Ok chuck mcgill

@BellTunnel 6 лет назад

Seems like every week you add a thousand subscribers to the channel. Love it. Keep up the great work, guys!

@JediAxis 6 лет назад

Excellent episode guys. Just hearing that you guys are actually getting the same noise that I do and that it is normal alleviated so many worries. You also presented great solutions. Thanks so much. On a side note, the lighting is improving as you guys are getting used to your new digs. It looks a lot brighter without sacrificing warmth. Keep it up guys and thanks as always.

@myronmosley2167 4 года назад

Starts video saying you never need a noise suppressor. Then spends an hour making a case for why you should have one. Lol

@dushk0 3 года назад

And 66 minutes are still not enough to mention that both the pedals have both a gate and a suppressor function.

@joshualee8448 6 лет назад

I love when Professor Dan takes us to school! I must have watched the VCPI episode half a dozen times when putting together my first pedal board (after 20yrs playing guitar) just to make sure I understood what to do about noise and such. Thank you guys for all the help! Much love to everyone involved

@danabnormal5892 6 лет назад

Bravo Dan. I love when you guys do this type of video. Very very useful and educational. I know a little bit more now than I did an hour ago.

@franknguitars7671 6 лет назад

Important episode - thanks for doing that. The need for clean and isolated power can not be over emphasized. I learned it the hard way 🤬 Dan has been very polite in not mentioning it - I have no connection to the company whatsoever but I wanted to say: his modular GigRig power system is just the absolute best solution out there. Small, light, powerful, clean, modular ... just absolutely stellar ... my wallet is in pain after buying so much of it, but it is worth it. All noise, hum, cable mess, daisy chain troubles are history now. Trying to save money in the power system is not the way to go. If the pedals are worth it for us, the power must be too.

@applemanuk 6 лет назад

Totally agree. A quality power supply with isolated power is the way to go. So may guitar players object to spending money on their power supply and wonder why their set up sounds crap when they get tons of noise, hum etc. I use the T-Rex Junior it’s an awesome power supply and I run half a dozen pedals with zero noise.

@CaveMonkey72 6 лет назад

Saw the NS-2 in action today and went out and bought one used at my local shop... best $40 I've spent on my board.

@ryanmrdmpro8251 4 года назад

I cannot thank you guys enough for this video. Particularly the first half. Indispensable information. In the beginning, there was a plan. You came into existence with a purpose! And you’re fulfilling that universal purpose! Best pedal channel imo.

@christinegoulden7940 4 года назад

Loved this episode. It is so much better now with me recording via a clean amp with a power brick instead of daisy chaining. Always find the shows useful from you guys. Thank you. :)

@calebstrader558 6 лет назад

I've been wanting an independent video on this subject for so long, thank you guys so much for giving me the info I need so I know what do to when I look for pedals for my dream board

@saustrian69 6 лет назад

I can NOT thank you guys enough for the amount of info shared in this medium format. VCPI episode and this made me feel like I went to audio engineering school for rockers. Absolutely brilliant! I will have to live with that single coil hum, it’s just that sound. Tone chasing is a never ending quest.

@DRodMuzicman 4 года назад

This was the best episode! most in depth about a subject we all most go through NOISE. Thanks guys!

@oansun 6 лет назад

It's like, Dan shows his metal/shred roots once in a while and he's at home. He does the blues kind of stuff and stumbles because it's not his thing. Just shred Dan, SHRED AWAY. Mick, you can chug decently too tho

@JordanJamesAW 6 лет назад

I'm happy for Bea to become That Pedal Show's resident Djent/Prog expert.

@EzzRidesBikes 5 лет назад

Thank the good lord for That Pedal Show. I've been using the Sentry for over a year and still had a bit of noise (not much) from the high gain channel. I finally get around to watching this video. It's simple. Just run the send and returns through the fx loop. Problem solved. I had no idea. Thanks guys. SLAAAYEEEERRRR \m/

@jacquesd5781 6 лет назад

I just love this show. Every second is instructive and/or entertaining. Awesome work guys, cheers!

@MythosSoundStudio 6 лет назад

I am always amazed as to how you guys take what seems to be a simple pedal, into a science experiment, AND have it all make perfect sense. I have a whole new respect for power isolation and when to use a gate (even if the hiss got really grating at times - lol). And one thought, might be good to put a cabling graphic up when talking signal chain. I'm not sure I get how it was setup, but would be nice to see it visually. Thanks guys!

@lazyguitarman9438 6 лет назад

That ending was the best thing that ever happened on TPS

@ronnieeagleandthealchemist2333 6 лет назад

They literally look like Beavis and Butthead rockin out.

@PBOD 6 лет назад

Don’t forget the merit of the in-between pickup positions when using single coils. I’ve had to change all the lighting in my studio due to interference from transformers. This is such a great subject guys thanks for covering it.

@adamdam 6 лет назад

Top notch vid, I as a metal guitarist have been Ummming over the sentry gate pedal for at least a year as mine only cuts the obvious sound and therefore ruining attack and tone and this has helped me decide to take that plunge and just from watching this vid I've confirmed what my main signal issues are...just the kind of info I've needed recently so this vid was a treat!

@GummyWormeon 4 года назад

Great episode. Sometimes I watch tps just for fun, sometimes it’s to solve a problem with my guitar tone. Today was the later, and I’m glad I did. I need to tame down the noise from my combination of boost and fuzz. I’m not a super high-gainer, but I like being able to roll my guitar volume knob to get anything from thick fuzzy goodness to chimey OD. The Land Devices harmonic percolator is perfect for that, but especially with my always on dirtyish boost in front of it, the noise is massive (even with an isolated power supply, MXR Iso-Brick)!

@Craig1959M 6 лет назад

Great show gents. Loved the Slayer!

@NunoGuitarsSilva 4 года назад

Amazing video, great demos and explanations, thank you guys!! You’re the best! I just got a preamp Engl E530, really high gain equipment and the noise supressor works just like you say! :-) Cheers! Greeting from Portugal and stay safe, stay healthy.

@paultwiselton1996 6 лет назад

What a truly educational and interestingly informative show. I prostrate myself at your feet Dan as the true guru of sound. 👌🏻

@abramtreadwell722 6 лет назад

Great episode! I was using an ISP decimator g string and it worked great for some time. But once I discovered my power supplies were causing proximity noise I replaced those and my rig was quiet as a mouse.

@ThatPedalShow 6 лет назад

Hooray. :0)

@TheMitjalovec 6 лет назад

38:57 Raining Blood time! You two are awesome!!!!!

@timbob. 6 лет назад

Mitja Jalovec SLAAAAAAAYER!!!

@zombiemosher1139 3 года назад

Another great video. Being a metal player I knew pretty much everything covered but still enjoyed it. Obviously with you not playing in that world you don't need these pedals but its not always possible to turn down the volume in fast start/stop parts & that's where gates etc are essential.

@antoniojazzyguy1754 5 лет назад

Great video, Im a big fan of both of you guy, i really love to learn every time a little more about the gear world!!!

@krimsonlediable 6 лет назад

Hey Daniel and Mick, the TC gate is probably the worst gate ever to take as an example. And you’re right Mick noticing a difference in loosing frequencies, when turned on. It’s a shame you didn’t have the ISP G-string, because it is by far the best gate pedal on the market.

@rolandashdown4903 6 лет назад

Great show (again). Thanks. Humble request here please: Might you be able to put up on screen a "napkin-sketch" of the signal chain/path at the end of each vid.? I know there's a lot of the G2 wizardry going on, but when Dan said the guitar goes into the NS, is that direct and then the out of the NS goes into G2? Or is there a loop out from the G2 going into the NS which then does a merry dance around any number of combinations of loop/pedals then split into humdingers then back to the input of amp(s) then... etc. For me a very basic sketch would be most useful in the learning curve... Thanks again.

@jamesgalea4092 4 года назад

Great job guys ! Thanks for sharing your knowledge!

@777Yoni 6 лет назад

Great shows as always, gentlemen. Thanks for the content.

@MNGuitars 6 лет назад

Still saving for the whole G2 system for a big board however at the moment my small gig board, used all the time, uses a 1 spot daisy to power a D+M and a keeley comp only, then i have an HX FX and use its included supply...i also have a 1 spot cs12 brick on my medium board, its great...great episode guys!

@tompoynton 6 лет назад

Mike Nappi +1 for the CS12, superb power supply

@2Plus2isChicken2013 6 лет назад

I agree, I have one and it's great, but still doesn't have enough connectors. There are never enough!

@mattgilbert7347 6 лет назад

That's why I use two bricks and two separate 9v adapters. C'est la vie.

@EverydayGuitarist 6 лет назад

I love how Dan is trying to make a serious point *Mick reaches over and drinks out of comically large water bottle* actually though. That thing must be a half gallon of water! Hydration = Tone

@BlackRootsUNLIMITED 8 месяцев назад

Very informative video. I've been enlightened. I'm a Bass Guitarist, I'm using the EHX Hum Cancelling pedal at the moment, coz our power here can be atrocious, and there's lots of interference. I've learned so much. Thank you. Greetings from Uganda 🇺🇬👊🏿🖤

@edwinpringle7342 4 года назад

I use the ISP decimator ll when I have to and it sounds great, no tone suckage at all and it also doesn't kill the sustain at all. Best noise suppressor I have ever used. Sometimes you gotta do what you gotta do, J.S. nothing to do with wiring or power supply.

@jamescull8047 6 лет назад

I use the Boss NS2 and the TC Sentry for specific purposes (ideal for synth pedals like the EHX 9 series). Mick noticing that the Sentry changed the tone is spot on - it's digital so therefore there is A/D conversion and some latency, hence the phase change Mick noticed. TC don't publicise this but this is how they can do frequency gating in the digital domain. The Boss is totally analog with a colored sound. The Boss is not capable of hard gating and It is not intentionally changing the frequencies either. It is really an Envelope Controlled Amp. This means that the amplitude of the gate follows the amplitude of the input signal. That can be either very useful or very annoying. Saturated signals basically are brickwall limited and don't have much dynamics left. The NS2 can be used to impose the original guitar dynamics onto the saturated signal. But for synth or metal sounds we may not want this. That is where a hard gate can be much better - where the gate is either on or off like a switch and does not change the dynamics in between. The TC can do this. The Decimator is pure analog signal path whith sophisticated hard gating which is why I believe it rules for metal. At 52:30 when Mick notices that the reverb is gated he is correct. It is the NS dynamic behaviour that was letting some reverb through but when he damped the strings the reverb got shut off too. Time based FX don't make much noise and could be inserted *after* the noise gate but still in the amp FX loop. That would allow the reverb tails to ring out fully and mask the hard gating. Some metal guys use two noise gates but I don't see the need for this if it's done correctly with the clean envelope detection immediately from the guitar, and the actual gating done immediately after the final dry sound stage but before any wet FX that need to ring out. Great show :)

@sambormann2369 3 года назад

I find the 1 spot pro 7 to be a great power supply, I've never had noise issues using it.

@ThePanchomack 6 лет назад

Awesome Episode ... great explanation of different sources of noise ...VICP !! Thanks for this one guys! Cheers

@levicoats 6 лет назад

Thanks for the awesome episode, you guys have a knack for knowing what questions I have and releasing videos with the answers. You’ve done it so many times it’s almost scary! Lol

@Paul_Lenard_Ewing 6 лет назад

I tried them all and owned a few. I use 60 pedals. YES 60. They are in 5 loops. The dirt pedals are in 3 and I use 3 Sentry gates. I have no problems at all. The Sentry are the very best!!!

@Paul_Lenard_Ewing 6 лет назад

One thing I should add. Once setup for your particular rig you can leave it alone. But before I do a tune you reset the decay knob with a minor tweak to just get the right perfection for the tune I'm doing and the pedals I have selected. I can tighten up parts of tune like when playing chords for backing a vocal when I use a medium gain OD. It makes all the parts I play come off like the sound you hear on recordings where the engineer has cleaned up all the slop. I couldn't live without them. Without them the overall sound sounds crude and amateur.

@williewilson9836 6 лет назад

I used to need a noise gate....isolated power from gig rig and a G2 has made me forget all about that 🤙

@rmcunningham3874 6 лет назад

This is fantastic! I guessed this was the problem with my pedals last week and ordered an isolated power supply. Now I get a full explanation about why I needed to do it!

@joewilliams3204 6 лет назад

A long overdue subject for TPS to address. Great job! I definitely learned a few tricks/remedies to try the next time hum & noise takes over my rig.

@1961jscofield 6 лет назад

Really, really looking forward to the show where you bring Rabea on again!. Stop teasing!

@asmallfarmhomestead3657 6 лет назад

16:46 Mick demonstrates how the light saber sound was achieved

@Bullittbl 6 лет назад

Great show! I can’t believe how much better your new place sounds. Your audio has never been better!

@ThatPedalShow 6 лет назад

Hooray. I’m happy. Mick here.

@chedhead3278 6 лет назад

Food for thought, must go through my board with this in mind, cheers chaps :)

@andreaslinderholm6186 3 года назад

Dan playing Slayer on a Telecaster. Pure gold.

@southpaw335 6 лет назад

Dan, it’s not Red, but i have to say I am liking butters more and more...

@Adamhauk22 6 лет назад

Great show guys. You’ve definitely started to hit your stride in the new “That Pedal Lounge” Really enjoyed it. The new Victory sounds amazing. 😄🎸🎛🔊🎼❤️

@TheRaggamuffin1000 6 лет назад

Great show as always! Just wanted to share a signal path that served me wonders as a someone who uses gain pedals as well as heavy amp gain. Guitar->tube screamer -> OCD -> Input of NS2-> Send of NS2 into input of amp -> send of amp -> GE7 -> return of NS2. And by using it all with a switcher I can get rid of the NS2 when I'm playing clean.

@thekramdens 6 лет назад

Got a D&M Drive on the weekend. Love at first shwang. Well done

@ThatPedalShow 6 лет назад

Hooray! Hope you love it!

@muuhn 6 лет назад

thank fuzz it's friday!

@marklangley217 4 года назад

Came here because of last week's VCQ and, man, I'm so glad I did. Learnt so much. The daisy chain is in the bin! I now have a power brick. Dan you're a legend and thanks to both of you as always 👐👊

@VanTastik 3 года назад

Great video guys! It does drag on quite a bit at times though and I don't have time atm. It feels like there's still a lot of ad libbing and atm I just need something to get to the point. Still great though. Thanks! 🤩

@justingarcia7722 6 лет назад

Saw Radiohead last night for the first time. Dan, beautiful work on Ed’s board. The sounds manifesting were otherworldly. That is all.

@ThatPedalShow 6 лет назад

Ah, cheers mate :)

@danielharper2030 6 лет назад

i know it seems silly. but please do a video on tuners... there an essential. and ive always wondered why you have the di'addario or the strobe? please do one. everyone i know wants it ;')

@philipellis7039 6 лет назад

Daniel Harper big issue with tuners is always how easy they are to read in bright sunlight. So, outside broadcast needed for That Tuner Episode. Before the British summer ends. This weekend really...

@ThatPedalShow 6 лет назад

Ooooookay. We use the D’Addario because it works and they sent it to us. Nice and bright, big display. I use the TU-3s, Mick here. Dan uses the Sonic Research jobbe. Very personal decision. Cheers!

@michaelangeloh.5383 5 лет назад

Basically get a Korg or Boss... Done. - I've had the TU-2 for over maybe 15 years, still working despited being stomped on very regularly. - The only reason I'd want a different one is the looks and design and perhaps newer ones would respond a little quicker. But every time I just kinda shrug and don't bother replacing it, cause it's still like new and doing nothing wrong actually.

@BothellPlaysMusic 4 года назад

keep in mind that having a meter that shows how many cents off-pitch a note is can be crucial for some musicians picky about intonation/temperment. Check out guitarist James Taylor's youtube video on how he tunes his guitar. Honestly I can't hear the difference when I follow his oddly specific instruction vs standard tuning. Some people have 8 strings with a fanned fretboard, and the advice may not apply to them. Others rely on a trem/whammy to fine tune each note they play and DGAF about tuning.

@joethrelfall6370 3 года назад

@@ThatPedalShow two things in observation here. 1 being that the lights interfering with lights etc. I'd recommend getting your guitars shielded as it will help reduce noise

@IzzaZone365 3 года назад

Oldie but Super Informative Just start building my pedal and working through issues!! Great Channel crazy and much appreciated content!!!

@thomasraven 6 лет назад

The show looks great and sounds better than ever. Congrats, guys!

@ludlow555 6 лет назад

Dan and Mick haven’t heard Metal since 1986. 😂😂😂😂😉 Maybe if you bring Rabea for a Metal equivalent of this, you can get Kevin Shields and do a proper Shoegaze show.

@CrutchExe 6 лет назад

I love how natural and how unforced these guys act, it just makes the viewing experience . It’s so much nicer over the usual shouty delivery of other content creators

@CrutchExe 6 лет назад

William Campbell I like the sarcasm, however I don’t think you understood my point. What I mean is that they don’t look like they put on some false persona i.e: they don’t act overly enthusiastic, shout lots and attempt to force comedy nor do they actively make out like everything they try is the best thing since sliced bread.

@CrutchExe 5 лет назад

William Campbell sorry for taking your message too literally, it can be difficult to understand the tone of message over text 😁

@PulpFreePress 3 года назад

Still a helpful video today! I switched from a daisy chain pedal power cable to individual cables and now only need the noise suppression if I turn on two distortion pedals at the same time. Thanks guys!

@ThatPedalShow 3 года назад

Hooray!

@GerryBlue 6 лет назад

I have my NS2 at the beginning of the chain, love it, also use it to power half my board, great pedal.

@suspnd6170 6 лет назад

9:30 "If you don't power your pedals right, NOTHING else matters".

@peterjessop1878 6 лет назад

I’m sure this will be a useful episode for a lot of people. Personally I find the hum of single coils and noise from a dimed fuzz rather reassuring that everything is about to sound glorious😄

@ThatPedalShow 6 лет назад

I’m 100 per cent with you. Mick here.

@chrisegg7936 6 лет назад

absolutely yes

@CorbCorbin 6 лет назад

This is the proper way o' things. ✊🏼

@george1906 6 лет назад

That Pedal Show I have an AC30 with only the one pedal (Wampler Plexi Drive) and for some reason when I plug it in via amp and guitar, it makes a lot of noise. Is this because the power adapter I use to power the pedal is terrible?

@CorbCorbin 6 лет назад

George Richards It could be. Make sure what you use is the proper volts and ma(milliamps) for the best result. Does your Vox have a Bright, or second channel, that gets more of the noise? Because your using a Marshall in a box style pedal, with your Vox, so you want to have your amp set right as well. Wampler will answer questions on his channel quite often, maybe email him. It doesn't hurt to try. Did you see the episode the boys did on Fuzz/distortion with Vox amps? It's a good one you might find interesting, if you haven't already.

@StringsOfCrossroads 6 лет назад

Really helpful advice here. As a Worship guitarist I’ve struggled keeping the noise down with drive pedals / single coil hum but then had issues when doing volume swells where the first part of the note is lost... sort of have a love/hate relationship with noise gates etc and as my playing has progressed I’ve also come to the realisation that without is better and knock the volume off when not playing! So glad you guys are on this same wavelength! I guess I’ve learnt a lot from you guys over the episodes! Thanks

@stevendobias2960 6 лет назад

Loved your approach to this complex topic about noise - you guys are always teaching me new things - nicely done! I just started using a TC Sentry for my P90 LP when pulling high gain out of my Marshall amp. Easy to switch the Sentry off when the gain is dialed back and its not needed. I just run it in the effects loop, but I will have to try the setup you used today. That Boss noise suppressor did a nice job as well ... hmmm. Loved that P90 guitar Mick! The creamy tones you pulled out of that guitar were amazing! 60 cycle hum is something to be embraced, not feared :)

@rossridesmtb7497 6 лет назад

That metal show!

@wlawnsldj 6 лет назад

You need Jazzmasters and compare the P90 pickups with the Jazzmaster

@sadmanmahdi8281 6 лет назад

Erjim Delos Reyes agreed

@gilbertsevdays 5 лет назад

That guy on the left use a p90 and it sounds fine without noise gate

@redielg 3 года назад

Jazzmaster pickups are very noisy. It would have been great to include them.

@thedavegoodman 6 лет назад

I really appreciate this topic. I play a lot of metal and hardcore and it has taken me years and years to come to terms with how giant crunch and clipping gain sounds are produced AND perceived.

@tushar8998 Год назад

Thanks a lot! This is such a useful video. You guys are doing epic stuff for the community.

@ericolson326 2 года назад

It wasn't your imagination -- I've heard that "weird phasing sound" with all TC products I've ever tried, Spark boost excepted. Something about their A/D conversion, I reckon.

@paulcowart3174 2 года назад

Never did get on with TC so maybe that's why

@10sassafras 6 лет назад

Great show. My only problem noise is the preamp on my old Boogie for some mainly acoustic type gigs. I use an NS2 rigged the same way as here with the preamp in the NS2 loop. I set the NS2 decay to minimum and the output then goes to delay, reverb and looper on the board before going to the FX return on the amp. Delay and reverb tails sound so good when not competing with background noise!

@jamesgoddin8880 6 лет назад

What a coincidence this video turning up this week. It just so happens that I ordered a shiny new power setup from Gigrig earlier in the week because I was suffering the exact symptoms you demonstrated here. Can’t wait to rewire the board with the generator, distributors and isolators and get it nice and quiet.

@ajdsp Год назад

Thank you guys. This was sooo helpful.

@evanward4303 6 лет назад

I love my ISP Decimator II.

@georgeadkins2352 6 лет назад

Evan Ward it's a decent pedal. Wish I would have known about the G-string before I picked it up, tbh. Anywhere between 12, and 1 o'clock, the decimator 2 really starts affecting tone

@evanward4303 6 лет назад

george adkins Not for me.

@jimlong3223 6 лет назад

I use a isp decimator in my loop just for when I am using a strat with high gain. Helps with shrieking feedback, though I do play a 100watt peavy xxx in my living room these days.

@MouseCopLives 3 года назад

I have got the same amp actually cheers! Theyre amazing underrated metal amps especially for the price you can get them on the used market these days

@MrWilson-WithaPbass 6 лет назад

my gosh ! that tone with the P-90 thru the tube screamer, TB, and big sky ,just great .

@juanmartinreborati7928 6 лет назад

Interesting! I never had noise problems because I use independent transformers and batteries. But it's a pain in the neck sometimes. One day I will solve that with some of your stuff Dan. Cheers!

@filemonlysander 6 лет назад

Much Love from Indonesia! Please make some video about guitar action , Buzz and the other things about that :)

@TheRealFreekBos 6 лет назад

Yes.. but don't forget... It is called That PEDAL show.

@MrCaedo 6 лет назад

What's the steady low hum I'm hearing throughout the entire show? Really annoying after a while... Oh, right... it was the fridge in the room next to me.

@kmw5100 4 года назад

I was just sitting here thinking about that. After years of modeler amps/pedalboards and bedroom playing I’ve joined a band and bought myself a proper amp rig and have started buying pedals and I’m trying to make sense of it all, then I was watching this thinking “oh god that must be unbearable in the room” then I realized my computer, fridge, air conditioner, etc all making so much noise all the time that I’ve just grown immune to. not that I don’t feel like a noise suppressor wouldn’t help, but I guess I don’t need to go throw another $200 or so down the drain after I’ve just bought another pedal this week.

@PapaWheelie1 4 года назад

My dog is snoring

@lungbuster666 6 лет назад

Awesome show today. There's guys out there who use a lot of gain from their amp, in heavy bands like I do, yet use vintage guitars and still love their pedals and like to straddle the world of metal and bluesier noodlings at the same time. Noise suppressors are essential and you covered the topic brilliantly. Thumbs up.

@garyhicks789 4 года назад

Thank you, good explanation, cheers

@davidhawkins9206 6 лет назад

Isp decimator is great, especially to kill hum between songs

@CGCEifel 5 лет назад

I got hooked by a Tosin Abasi Pedalboard video and got my ISP Decimator II. Never looked back.

@DevilMayAsian 6 лет назад

Didn't think I wanted to hear Dan and Mick play thrash songs, but I was obviously wrong. Delightful.

@Zchordmaster 6 лет назад

Hey guys! Another fantastic video! Just a comment on the boss. I've used both the boss ns-2 and the sentry the same way you used them in the fx loop of the amp. I've found that if you use the "hiss" mode on the sentry it essentially acts the same way the ns-2 acts. However I've found that the sentry has way more natural of a cut off than the boss. Just an opinion. Maybe something you guys could try yourselves. I know it's definitely helped me. I use a cranked Victory Kraken on Gain 1 pretty much all the time and my sound floor is almost silent. The settings on the pedal are Damp 1:00 Threshold 11:00 Decay 11:00. Thanks again for making these awesome videos! You guys are what got me really into pedals! Keep it up!

@guitarlife6190 6 лет назад

Bought your pedal, I use it with my Friedman BE 100 amp. Truly an amazing sound. I know that has nothing to do with the context of this show I had to give a shout-out. After chasing a sound I’m 100% happy with for 35 years the search is over.

@ThatPedalShow 6 лет назад

Wow! Thanks Kevin. Whatever you have, we’re just glad you’re inspired by the sound. That’s all that matters!

@SCOREWIZARDSMUSIC 6 лет назад

Any chance of a video on shielding? I know its a hot subject but I would really like get your opinions on shielding in your usual thorough manner.

@ThatPedalShow 6 лет назад

It’s not something either of us do, at all. So - Mick here - I don’t anything about it. Maybe Dan does?

@DavidMorisset 6 лет назад

Shielding what? Is that when they place foil under the caps and pickups?

@SCOREWIZARDSMUSIC 6 лет назад

Yeah, gluing foil or spraying metal paint into the guitar cavities to theoretically create a Faraday cage that blocks RF...which after googling I think might be hogwash

@SCOREWIZARDSMUSIC 6 лет назад

I did some googling and I have concluded that shielding doesn't do anything either way...I withdraw my video request

@duel2k7 6 лет назад

Shielding does make a difference, and does reduce hum. Ever picked up noise from your phone being in your pocket? That would be reduced with good shielding. There is an argument it can reduce resonance in the guitar but that's on the guitar and player to decided. Here's a video which shows the difference shielding can make. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OpPjF3NMcaU.html

@nicholaspetergagg7769 6 лет назад

I think it is essential if heavy drive or compression are used .I really like my boss ns2 and it actually slightly enhances the sound on my pedalboard

@DavidMorisset 6 лет назад

nicholas peter gagg why would you need gate with a compression pedal?

@gabe2869 6 лет назад

because one of the things a compressor does is make the quiet parts louder. So, if your sustain is up high, the otherwise quiet noise will become MUCH more noticeable.

@mattgilbert7347 6 лет назад

My Comp has an inbuilt gate. You can roll it off completely and bring it up if necessary. Mi Effects Compressor.

@frank_gappa 6 лет назад

Great video! I had a pocket watch when I was in high school. I remember hearing a beep every second (literally) when I stood with my guitar. Come to find out that the pocket watch was doing something to the signal through the volume pots. Super weird. Love your videos!!