Тёмный

Befaco - Muxlicer (bi-directional switch, sequencer, advance pattern generator and more!) 

DivKid
Подписаться 48 тыс.
Просмотров 52 тыс.
50% 1

Timing index below so you can skip through the patches and sections to check out all the functions.
Here's the powerful and fun to use Muxlicer from Befaco. It's a module that's capable of sequencing CV, advance gate patterns with ratchets/bursts/re-triggers, bi-directional sequential switching where one input goes to several outputs or several inputs go to one output. There's internal clocking and tap tempo, external clock divisions/multiplications and a clock out with independent div./mult. too. It can be a real hub of a patch, self patched for more complex functions and it can be ran by clock or CV addressed moving through the stages. It can play/stop/reset or even one shot play through. One shot play through with additional external slew limiting (I'm using Rampage here) can create some unique 8 stages envelopes too.
Other Befaco modules used and mentioned in the video
Rampage - • Befaco - Rampage
Hexmix series - • Befaco - Hexmix, Hexpa...
Sampling Modulator - • Befaco - Sampling Modu...
More Muxlicer action with Burst - • Juggling Rhythms with ...
00:00 Hello and previews patches
00:42 Feature run down and overview
02:12 Sequencing CV
02:39 Gate mode (ratchets/re-triggers per step)
03:37 Modulating gate mode
04:01 Clock division / multiplication of the input clock
04:57 Clock output with independent division / multiplication
05:59 Play switch (play, stop, reset and one shot)
07:24 Self patching to change step length
08:19 Run & address - CV addressing stages in sync with the clock
09:33 Internal clock and tap tempo
10:16 Building beats with individual gate outputs
11:01 Modulating gate mode to add ratchets to beats
12:20 Self patched sequencing to create an advanced gate sequencer
14:16 Sequential Switch - multiple ins to one out / all input
15:16 Volume/level control over each switch stage
18:07 Creating custom stage lengths while switching
18:20 “Fake Expansion” to 12 stages.
19:27 Sequential Switch - one in to multiple outputs
21:37 Using one shot mode and external slew to create custom 8 stage envelopes
Subscribe for more DivKid videos: bit.ly/DivKidYTSub
Be awesome! Support me on Patreon - / divkid
/ divkid
/ divkidmusic
www.divkidmodular.com/

Видеоклипы

Опубликовано:

 

3 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 115   
@PatternRecognitionMusic
@PatternRecognitionMusic 6 месяцев назад
Finished building mine last night, I know I'm barely scratching the surface of its capabilities right now. Demos like this are really helpful, and I can't wait to dive deeper!
@DivKid
@DivKid 6 месяцев назад
thanks, hope you get some great results out of it.
@antiHUMANDesigns
@antiHUMANDesigns 4 года назад
So much power for such a good price. I'm getting one. Gotta hook this up to a Moog DFAM!
@obtwon
@obtwon Год назад
Divkid you are a mastermind in the modular world thank you!!
@DivKid
@DivKid Год назад
thank you, really appreciate that and it's a pleasure to be able to share things with such a great audience.
@kirabarsmith9353
@kirabarsmith9353 6 лет назад
The best thing about your demonstrations is that you get good results.
@DivKid
@DivKid 6 лет назад
good results? As in patches you like?
@alexnosek1066
@alexnosek1066 5 лет назад
I freakin' love this module for some reason. One of my favs ever.
@DivKid
@DivKid 5 лет назад
yeah really creative and fun way to sequence and switch.
@robertrhoades1618
@robertrhoades1618 6 лет назад
Purely based on the sequencing, my 'weird sequencer' collection needs to continue with one of these :)
@DivKid
@DivKid 6 лет назад
Weird Sequencer collection ... that sounds great! :)
@GuitarsAndSynths
@GuitarsAndSynths 3 года назад
@@DivKid just like VCAs you can never have too many sequencers!
@accidentaltrigger
@accidentaltrigger 4 года назад
Have returned to this tutorial soo many times, always find something new to consider, thanks
@jamesl5944
@jamesl5944 6 лет назад
Demos consistently good, I’ve really slept on Befaco and normally mix and match but could totally see a Sequencer skiff focussed on these and a few of their others you’ve shown us. Thanks from Aus
@DivKid
@DivKid 6 лет назад
Yeah a Befaco skiff would be really cool.
@turingheat8933
@turingheat8933 6 лет назад
Got mine built up and firing away this afternoon. What a corker! I'm going to take the individual gate outs into a sequential switch and use the EOC to start switching through reset points to make even more complex gate sequences tomorrow.
@DivKid
@DivKid 6 лет назад
oooh nice.
@lovedeathdisco
@lovedeathdisco 3 года назад
just got mine yesterday and this video is extremely helpful 🤘🏼
@nzd8870
@nzd8870 2 года назад
Awesome module. I'm just getting started and was looking for other "more complex" sequencers... not sure is want I want anymore, think I'm going to explore this one for a good while. Thx for the tutorial!
@hugofauvez8911
@hugofauvez8911 5 лет назад
owww , i've just ordered it, seems to be the ultimate weapon alongside my matter & transient. glitch all way trough !! haha thanks for your vidéos man, cheers!
@DivKid
@DivKid 5 лет назад
nice one Hugo.
@ben-rosfeld
@ben-rosfeld 5 лет назад
12:33 is super cool for like 2 seconds, I like that effect
@DivKid
@DivKid 5 лет назад
25 minute video ... only cool for 2 seconds! haha. But yeah that effect is something to explore.
@PspiralifeTutorials
@PspiralifeTutorials 3 года назад
What a super cool Module!
@FishfaceFP
@FishfaceFP 5 лет назад
Beautifully formed module and demo, love these videos the best Ben. Cracking cheese Gromit😊
@invisibleralfgerritse1667
@invisibleralfgerritse1667 Год назад
awesome video on a awesome module! :) Thanks.
@DivKid
@DivKid Год назад
thanks
@nathanbryers
@nathanbryers 3 года назад
16:30 - wow! Beautiful
@BrunoWiebelt
@BrunoWiebelt 6 лет назад
really very compact fun and useful
@DivKid
@DivKid 6 лет назад
Yeah compact but not a cramped interface they've really cracked that.
@brianreilly6545
@brianreilly6545 2 года назад
Tremendous tutorial. Thx!
@DivKid
@DivKid 2 года назад
Glad it was helpful!
@Starthief
@Starthief 6 лет назад
This is really cool... Ben, if I have to buy a bigger case it's your fault. :)
@DivKid
@DivKid 6 лет назад
:) buy two, you'll need them eventually. It's a trap!
@davidsimons1377
@davidsimons1377 5 лет назад
Man, I really dig the groovy Reggae riff at 16:15!
@DivKid
@DivKid 5 лет назад
I guess it does have a little reggae vibe, didn't think about that.
@stolencoats63
@stolencoats63 Год назад
Sounds more like the Macarena hahahaha.
@jsleeio
@jsleeio 6 лет назад
The spawn of the Doepfer A-152+A-155, sort of. Looks great. Thanks again for your comprehensive coverage of things! I don't really like the layout of the controls+jacks at the top, and also don't like the idea of using an encoder press for tap-tempo (would prefer separate buttons that are actually buttons), but those are both fairly minor whinges. If I hadn't already just submitted a Thonk order I'd go submit a Thonk order!
@DivKid
@DivKid 6 лет назад
To be honest I nearly exclusively clock it from other sources so I haven't really thought about the tap tempo. Good comparison to the Doepfer units, it definitely brings a lot of things together into a useful package of it's own.
@markblacket8900
@markblacket8900 2 года назад
a fun way to use this module is clocking it at audio rate to get a lo-fi graphic vco with a harmonically related (until it drowns in aliasing that is) pulse wave on the gate out
@stolencoats63
@stolencoats63 2 года назад
This sounds interesting. Can you explain a little more in depth. Noob here but would love to try this out. So far I'm guessing you send a square wave at audio rate to clock it but then what are you doing from there?
@radpix
@radpix 6 лет назад
wow around 16:20 ... great !
@DivKid
@DivKid 6 лет назад
oh yeah that one is good fun.
@TheCheeriosMan
@TheCheeriosMan 2 года назад
Awesome video and such a cool module. Thinking about this for my sequencing because of the patch programmability. Is there a way to trigger it to advance 1 step at a time, say if you had a trigger sequence running into the clock that wasn't consistent, say just hitting on 1,2,3 but 4 had no trigger? Or does it just try to maintain the clock at all times? Wondering if I need something like a Clep Diaz to gain that additional functionality.
@kentxx12
@kentxx12 6 лет назад
Good :)
@DivKid
@DivKid 6 лет назад
thanks.
@synkrotron
@synkrotron 6 лет назад
The price of this thing is amazing... Just bought an ADDAC206 which is more expensive and nowhere near as feature packed. That said, I could see the ADDAC206 working very well in conjunction with Muxlicer in the same setup.
@DivKid
@DivKid 6 лет назад
Yeah having multiple similar but slightly different units can yield some interesting results when you chain them or push them into the areas where they differ. I don't know the 206 well.
@NickHchaos
@NickHchaos 6 лет назад
ADDAC stuff is nice but sort of overpriced IMO if you buy it new, and their digital modules are a mixed bag. I sold the 206 because there was only one out for all the ins.
@accidentaltrigger
@accidentaltrigger 5 лет назад
Great demo, as always, I bought one! Spent all day trying to stop the Pico drum double striking from the gate out of muxlicer. Which drum modules were you using that ignore the second stage of the gate?
@DivKid
@DivKid 5 лет назад
not sure to be honest but I haven't had issues with the PICO Drum double firing. It might be the level of the gate, can you attenuate the gate output and try that?
@accidentaltrigger
@accidentaltrigger 5 лет назад
@@DivKid attenuate the gate! Why didn't I think of that! Thanks for the suggestion Ben, and, taking the time. 👍👍
@pablospace
@pablospace 5 лет назад
Vest videos ! 👍🏻
@DivKid
@DivKid 5 лет назад
nice one Pablo! :)
@hernangmn
@hernangmn 2 года назад
great demo. I have the diy kit but i think it has a problem. When i try to do a basic sequence with a vco, puntting all faders down, the step one sounds higher than the other 7 steps (wich sound the same between them) any ideas of what could it be happening? thanks!
@Syncopator
@Syncopator 6 лет назад
I'm wondering if you can make use of the slider voltage to control the clock speed and thereby have an adjustable step time. Either way, looks pretty dang cool...
@DivKid
@DivKid 6 лет назад
Not by patching it back onto itself. You could use an external clock generator, clock Muxlicer with that, use Muxlicer's output to modulate the clock module and you'd have what you want.
@DBPawlan
@DBPawlan 6 лет назад
Wow...this looks incredibly useful. Kind of like a sequencer and sequential switch married into one...this can replace quite a few modules in my rack! Any idea on future price?
@synkrotron
@synkrotron 6 лет назад
£209 at one place I tried.
@DivKid
@DivKid 6 лет назад
Hey D B and Andy, I think around 200, released Wednesday.
@DBPawlan
@DBPawlan 6 лет назад
Hey, I have the Muxlicer now and want to use it to step through 4 notes of a chord. I have the CVs coming out of the Harmonaig into the i/os and the common i/o going out to a VCO. However, is there no way to trigger or gate one step at a time? The one-shot triggers goes through all 8 steps, but I simply want to use it as a sequential switch with a manual trigger to each step.
@roboslobonator
@roboslobonator 5 лет назад
@@DBPawlan Interesting. I own a Harmonaig as well and will soon own this one. My guess would be to modulate the address on muxlicer(could use its own cv sequence? Or another cv sequence) to shuffle through each individual gate step. Just guessing here based on the demo. I haven't really explored my harmonaig because I'm still trying to figure out what'd be best paired with it. I'm anticipating Loopop coming out with a video on it very soon! Also curious to hear how you're coming along with it.
@DBPawlan
@DBPawlan 5 лет назад
@@roboslobonator I couldn't get the Muxlicer to work as a sequential switch until I realized that it was expecting +10V and I was only feeding it +8V which didn't work. You can, however, set each slider as the CV pitch for your VCO and select (or randomize) each note through CV addressing.
@tcrist56
@tcrist56 2 года назад
DivKid, if you have time, I'd like to know more about addressing the switch in order to move to non-adjacent steps using probability from Marbles or the ADDAC504. I haven't done this before, but it looks like if I was using all 8 steps with the run/address knob sent to 0-10v, that each step would have a 1.25v trigger range. I don't see this in the manual and have been looking everywhere for some clarity.
@woodlandcritterpunch
@woodlandcritterpunch 6 лет назад
I've been telling myself that my rack is going to have no sequencing modules and that I'll just keep doing it all externally, but this is making me very conflicted about sticking to that...
@DivKid
@DivKid 6 лет назад
well just tell yourself it's a switch then you're fine! :)
@philhippie
@philhippie 6 лет назад
just a question, it seems that in the first simple sequence example, the sync between the gate and the cv change for pitch is slightly off, shouldn't that be more together? thanks
@DivKid
@DivKid 6 лет назад
can you give me a specific time in the video and I'll check that out.
@philhippie
@philhippie 6 лет назад
sure, it's at 2:45, probably most obvious when only 1 gate per step, it seems as if the gate is a bit earlier than the cv change
@DivKid
@DivKid 6 лет назад
Ah ha sounds like an issue I was having with a quantizer. Just tried the module and I can't repeat that behaviour (minus said quantizer - it's not in the case).
@philhippie
@philhippie 6 лет назад
thanks for checking!
@mattd2129
@mattd2129 3 года назад
I get this as does my bro who also has module.
@motoboy6666
@motoboy6666 3 года назад
What happens if you take the sequence CV out and put it in the Adress CV in? Would its sliders be able to control the pattern of the gate outputs?
@Ratimus_
@Ratimus_ 2 года назад
2:30 huh, so that's what the Thonk logo sounds like...
@DivKid
@DivKid 2 года назад
haha! Wondered what you were on about until I looked. Very good.
@chrisbliss7130
@chrisbliss7130 5 лет назад
I have been rewatching this again and again. I am trying to sequence a beat using the muxlicer and some patching panda moduls. Is there any way to get shorter gates or to turn them into real triggers?
@DivKid
@DivKid 5 лет назад
Do they need to be triggers? If it's an input that expects a trigger that module will likely ignore the sustained gate length any and just read the rising edge of the gate (the start). So you might not need to do anything.
@chrisbliss7130
@chrisbliss7130 5 лет назад
DivKidVideo thanks, ben! I am using the n.v.h.s from patching panda. It seemed to me that I couldn‘t reproduce the same sound with gates as I could with short triggers. Maybe that‘s just my lack of knowledge because I am still learning. Your answer gives me hope and I am going to try some more!
@timnordberg7204
@timnordberg7204 4 года назад
Is the address mode necessarily quantized by a clock? Was hoping this thing could do exponential rhythmic patters (accelerando, rallentando) with curved envelopes.
@thomaspatteson
@thomaspatteson 4 года назад
Great question. I am also wondering.
@sumocloud
@sumocloud 2 года назад
Anyone?
@mntbighker
@mntbighker 3 года назад
I just got mine working. Despite the fact this can sequence pitch, would you classify this as primarily a percussion sequencer/tool? What is the default CV sequence voltage range? What's the best method to limit it to say a 2 octave range, so the sliders are less sensitive to pitch change? You should totally do a video of this with OCHD.
@markblacket8900
@markblacket8900 2 года назад
there are two ways to limit the voltage range: you can plug an offset into all in or you can push the switch up or down while holding down the encoder to limit it internally
@PercivalThe23
@PercivalThe23 4 года назад
i dunno much about eurorack, but can you compare it to mutable stages?(looks similar^^)
@angrybobdylan
@angrybobdylan Год назад
What would we do without you
@DivKid
@DivKid Год назад
awwww thanks
@JB-xv4bw
@JB-xv4bw 5 лет назад
Perfect 808 BD there on 10:28 what module is that?
@DivKid
@DivKid 5 лет назад
Peaks from Mutable Instruments most likely.
@Lfo05
@Lfo05 5 лет назад
Can I just hook up a sine wave to this sequencer and than I can make sequences with pitch changes?
@geecen
@geecen 4 года назад
Yes
@naushilb
@naushilb 3 года назад
Hi, when using this module as a sequencer, is there any way to limit the 'range' of CV / notes ?
@demianluburic5257
@demianluburic5257 2 года назад
Yes, watch the official muxlicer videos, can't recall how
@jeanse27
@jeanse27 6 лет назад
Just ordered a RYO paths kit... Maybe build this Befaco kit after... Switching switch=joy?
@DivKid
@DivKid 6 лет назад
Double switch! That's good fun.
@jeanse27
@jeanse27 6 лет назад
DivKidVideo Oh yes!! Just finished building the RYO paths... Fun and easy build!
@DivKid
@DivKid 6 лет назад
Black panels and red, they'll look good next to each other too.
@jeanse27
@jeanse27 6 лет назад
DivKidVideo indeed!!
@peter-klausnikolaus4823
@peter-klausnikolaus4823 Год назад
there is quite a lot of glide glide going on. it seems the cv is still adjusting when the gate is firing...
@Molluszk
@Molluszk Год назад
Hi, Possible to individually randomise the steps or ratcheting them? As we can do with Xaoc Triana2 Like: four CV/gate steps per step repetition or ratcheting per step trigger/gate muting on board clock divider voltage controlled play direction, transposition and reset Thx, David
@DivKid
@DivKid Год назад
Hello, that's not possible on the module.
@tomnicholson1653
@tomnicholson1653 3 года назад
I can never hear you hi hats, Ben. Or hardly. I guess youtube filters the top end of your lovely sparkly hats.
@domtak
@domtak 3 года назад
Sounds like the CV is slewing to it's new value when the gate hits. It's not a clean jump.
@ekoboydj
@ekoboydj Год назад
I can't figure how to ratchet specific steps with incoming clock
@sebp400
@sebp400 7 месяцев назад
Com I/O to gate mode
@BadChizzle
@BadChizzle 4 года назад
Cool! Not sure you know... but that oscilloscope module follows you around a lot. Ha ha Sorry! Soooo... I’m sending you my address, so you can send me your module overflow. Lol 😝 one dem Clouds or Maths might be crowding you, for all I know.
@syzygygyoza
@syzygygyoza 8 месяцев назад
Are you using a quantizer?
@DivKid
@DivKid 8 месяцев назад
if I say I am (I think I do, but I haven't watched the video back) then yes. If it's definitely quantised to musical scales (probably a natural minor) then also yes. If you want to point me to specific sections of the video I'll check and tell you. The outputs aren't quantised, it's variable analogue voltage.
Далее
Befaco - Burst (more than a basic burst!)
20:31
Просмотров 31 тыс.
3 levels of sequencing with the Befaco Muxlicer
20:12
Советы на всё лето 4 @postworkllc
00:23
Бмв сгорела , это нормально?
01:01
$15m Russian helicopter destroyed by Ukrainian drone
00:11
Befaco MEX (Muxlicer Expander)
13:30
Просмотров 7 тыс.
Basslines can't get any easier than this!
16:02
Просмотров 27 тыс.
Muxlicer eurorack module - Demo and patches
7:28
Просмотров 16 тыс.
Exploring the 4MS Looping Delay!!
20:54
Просмотров 6 тыс.
Let's Talk Low Pass Gates!
21:10
Просмотров 17 тыс.
2HP Slice - Tutorial -  Glitch-audio buffer
7:36
Просмотров 5 тыс.
지민 (Jimin) 'Who' Official MV
3:28
Просмотров 29 млн
OBLADAET, YASMI - YSM PC
2:19
Просмотров 101 тыс.
АМ АМ
1:31
Просмотров 3 млн
Молодой Платон - МОЯ ДЕВОЧКА
2:29