Тёмный

Beginner Guide // $89 Micro FPV Drone Build - Eachine Tyro89 

Drone Mesh (Drone Reviews)
Подписаться 98 тыс.
Просмотров 12 тыс.
50% 1

Eachine Tyro89 Kit: bit.ly/2ZJN0D8
Runcam Split 3 HD Camera: bit.ly/330GIA8
Hex Driver: bit.ly/2NwBVxt
Battery: bit.ly/2xmvQ0V
XM+ Receiver: bit.ly/2Kamywh
X9 lite Transmitter: bit.ly/33WRpUs
Skyzone Sky03O: bit.ly/2YDi4q8
Get Your Premium FPV Drone Merch
shopdronemesh....
Consider Following me and supporting on Patreon.
/ dronemesh
----------------------------------------------------------
-- TOP 30x30 4in1 ESC --
Aikon AK32
BG: bit.ly/2uSBI0O
GetFPV: bit.ly/2FU854b
RDQ: bit.ly/2YVkL3K
Tekko32 Metal
BG: bit.ly/2G5VfRC
GetFPV: bit.ly/2VsroYV
RDQ: bit.ly/2UF3WKU
T-Motor F55A
BG: bit.ly/2JIdAo1
GetFPV: bit.ly/2P2i8sp
RDQ: bit.ly/2I3D69n
T-Motor F45A
BG: bit.ly/2CZe9IP
GetFPV: bit.ly/2D3g2U3
RDQ: bit.ly/2YZmCof
Dalrc Rocket
BG: bit.ly/2O5Pcxc
GetFPV: bit.ly/2WQ8Imk
RDQ: bit.ly/2Kg0EKe
-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG: bit.ly/2CM2oEG
GETFPV: N/A
RDQ: bit.ly/2GfMKDQ
Aikon AK32 Mini
BG: bit.ly/2Yu2E4p
GetFPV: bit.ly/2KlKlLU
RDQ: bit.ly/2KfQ6KV
Airbot Ori32
BG: bit.ly/2UTK2JF
GETFPV: bit.ly/2KlLfrM
RDQ: bit.ly/2U94tRe
Need Help with something?
dronemeshforum.com
Make sure to sign up to the newsletter and create an account to not miss big insane sales.
shopdronemesh.com
Android APP
play.google.co...
IOS APP
itunes.apple.c...
Follow me on Facebook
/ dronemesh
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmasterin...
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@DroneMesh
@DroneMesh 4 года назад
Eachine Tyro89 Kit: bit.ly/2ZJN0D8 Runcam Split 3 HD Camera: bit.ly/330GIA8 Hex Driver: bit.ly/2NwBVxt Battery: bit.ly/2xmvQ0V XM+ Receiver: bit.ly/2Kamywh X9 lite Transmitter: bit.ly/33WRpUs Skyzone Sky03O: bit.ly/2YDi4q8 Get Your Premium FPV Drone Merch shopdronemesh.com/product-category/fpv/
@doktordrone
@doktordrone 4 года назад
thank you very much for your useful sharing, Happy New Year 2020, may all the best for you 🙏👍❤️🥂
@rc3d490
@rc3d490 4 года назад
battery link are down, please check it.
@limestone_xyz
@limestone_xyz 4 года назад
Drone Mesh hey, are you still going to publish a part 2? I want to build my first micro drone. Any recommendations? I do have a 3D printer and am capable of printing tpu, pla and petg. Do you think this build would be a good start to get into building? Or would you recommend going all custom? Should be around the 100$ for the start ^^
@qs138v3
@qs138v3 4 года назад
At 12:01 you held your soldering iron on the tab for a solid 25 seconds which gave me a heart attack 😳
@Funcentric
@Funcentric 4 года назад
Thanks for taking the time to put this together and narrating in such detail with great footage to compliment. I know this took a lot of time to edit and put together. Much appreciated. Might give this one a try as I haven't built a quad before. I've only used BNF ones so far.
@ArchmageAU
@ArchmageAU 4 года назад
Good tutorial. For FrSky 2.4Ghz, I the best antenna placement is 90 degrees instead of 180 degrees. Still use 2 zip ties with heat shrink, but on different arms of the quad.
@gmivisualsjason3729
@gmivisualsjason3729 4 года назад
On a Kwad of such a small size I've not noticed any performance advantages to your method. Both do the job
@ArchmageAU
@ArchmageAU 4 года назад
@@gmivisualsjason3729 Not a big thing as small quads tend not to be flown as far away from the pilot. The limitation seems more to be the VTX than the RX. With a sub 3", you could likely run the antennas along the carbon arms and still not have an issue before unflyable through video loss.
@gmivisualsjason3729
@gmivisualsjason3729 4 года назад
@@ArchmageAU I'd agree with that. Interesting to note that on my 2 inch and 5 inch Kwad I place my antenna on the front arm/arms. So when flying away from myself and rssi starts to drop off then i do a quick 180 degree turn and signal strength bounces back up as antennas now facing me with no Kwad limiting the reception and I then do the return flight. When at the rear of Kwad it often gave me a scare when turning around and signal strength really drops off.
@MCsCreations
@MCsCreations 4 года назад
Beautiful build, Sam! Really fantastic job! 😃 All the best wishes for you and your family for 2020!
@KaizerTest
@KaizerTest 3 года назад
Excellent build video! And explained in a way that a beginner can understand. Thank you and subbed. 😃🍺🍺
@dronereviewman9580
@dronereviewman9580 4 года назад
Build it brother!!!! I want this kit!!! 👍😀👍
@Astropowergtv
@Astropowergtv 4 года назад
Love what are you doing keep it up
@sebastrianw.4673
@sebastrianw.4673 4 года назад
Thanks for the info. I'm thinking about my first build.
@gmivisualsjason3729
@gmivisualsjason3729 4 года назад
Seems to me it would be wiser for them to design specific areas for securely fitting vtx and Rx to the build.
@KaizerTest
@KaizerTest 3 года назад
I notice none of you drone guys put flux on the parts you solder. I know the solder has flux in it but when I solder on my cars I use flux everytime. It just makes the solder flow and stick much easier. But if you use too much it runs and can be messy. The flux makes the solder stick much better. Have you ever tried using flux?
@theproud77
@theproud77 4 года назад
How many Tyros are currently on the market ? 69, 79, 89, 99, 109, 119, 129, ...😅
@MCsCreations
@MCsCreations 4 года назад
4 or 5, I guess. 😬
@Julian-gv1fb
@Julian-gv1fb 4 года назад
First to the best.
@HomeDronen
@HomeDronen 4 года назад
I'm assuming the size of the compacitor doesn't really matter?...I've seen 330uF 25v on this size quad. Thank you for sharing!
@dronefilmsgermany
@dronefilmsgermany Год назад
I need to replace its cam as my current one broke. Can I get a replacement camera if yiu can recommend one
@tsjingtsjangtsjoeng9796
@tsjingtsjangtsjoeng9796 4 года назад
6:00 Hi, can you confirm that I need to bridge with PPM? I am using flysky but on the receiver i-bus and s-bus are on the same pin while PPM on a different pin? I mean, I saw tons of videos about building this drone and all of them saying you must bridge the middle with the s-bus.
@dlofpv5408
@dlofpv5408 4 года назад
Dont you have to invert the sbus signal?
@joecrush1118
@joecrush1118 4 года назад
Wondering if you can tell me if 3" Gemfan 3016 props will clear the on this frame, Looking to use the frame for a 20x20mm stack build but use Gemfan 3016 props.
@fabiofabius7065
@fabiofabius7065 4 года назад
hi i got this one but cannot get out of trouble using ibus protocol, no channels responding but in sbus it goes .... any help? thanks
@nadoushkaautaibi376
@nadoushkaautaibi376 4 года назад
Great vedio👍
@bozosni
@bozosni 4 года назад
Hi, nice review! It looks very nice for the money. I have a question, the connectors of the motors are the normal jst ? Meaning that they can bee used on any build with an aio whoop board?
@SeeFPv-qm6ie
@SeeFPv-qm6ie 4 года назад
can you install crossfire receiver
@MachineManGabb
@MachineManGabb 4 года назад
Would be cool as an rtf
@friendlyfire01
@friendlyfire01 4 года назад
Disappointing to see drone mesh leaving the receiving ends of the antennas completely exposed to be damaged
@Theo-dj7vs
@Theo-dj7vs 4 года назад
Hes a salesman...these are like grampas infomercials.
@BuzZ.
@BuzZ. 4 года назад
Back in my days, we ain't got no micros. If we wanted to fly indoors when I was young, we had to use our smallest X-class quads. And they where way higher quality then today's quads that's for sure...
@Sircleanfpv
@Sircleanfpv 4 года назад
Hi, Just bought this drone, I got a frsky r-xsr laying around, have I to bridge sbus with the middle solder pad? Hope you'll answer
@DroneMesh
@DroneMesh 4 года назад
Yes
@isbestlizard
@isbestlizard 4 года назад
who gave Lennie a soldering iron :V
@Theo-dj7vs
@Theo-dj7vs 4 года назад
Blah blah blah....hex drive my ass. You dont need a hex driver...you need whatever turns the screw. IF YOU CANT TRUST THE 1ST MINUTE, THEN YOU NEED TO BE SKEPTICAL OF THE REST. These dudes are just salesman...nothing else.
Далее
HA-HA-HA-HA 👫 #countryhumans
00:15
Просмотров 4 млн
Песня РАСПУТИН на русском!🔥
00:56
The BEST 3 Beginner FPV Drone Kits under $200
19:28
Просмотров 147 тыс.
Rekon 4 FR - My take on Sub250 Freestyle
16:03
Просмотров 15 тыс.
The 5 Types of FPV Drones
12:00
Просмотров 54 тыс.
HA-HA-HA-HA 👫 #countryhumans
00:15
Просмотров 4 млн