Тёмный

Ultimate Beginners Guide to Building A FPV Freestyle Drone 

Darren Allatt
Подписаться 9 тыс.
Просмотров 41 тыс.
50% 1

🙋🏼‍♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
➕ More
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
Tutorial on the complete process of building a 5" Freestyle FPV Drone from choosing your parts, building your drone, programming BetaFlight, Tuning and then Flying!
This video is Sponsored by SpeedyBee, T-Motor and FlyFish-RC.
Parts List (* denotes sponsored item)
Frame: FlyFish-RC Volador DC5*
Motors: T-Motor Velox v2 2207 1750kv*
Flight Controller & ESC: SpeedyBee F405 V3 BLS 50A 30x30 FC&ESC Stack*
VTX: SpeedyBee TX800*
Camera: Runcam Phoenix 2 (Micro) *
Antenna: Rush Cherry Straight MMCX RHCP
Receiver: Radiomaster RP1 ExpressLRS
Propellers: Ethix P3.5 Radberry
Batteries: Tattu R-Line 6S 1050mah
TimeStamps!
0:00 Intro
0:13 Sponsorship
0:21 How to work out which parts to buy
0:35 Parts Needed to Build a FPV Drone
0:40 Work out what parts are best for an FPV Drone
0:54 The First Part to Choose in Building a Drone - Frame
1:16 How to Choose a Flight Controller & ESC
3:40 How to Choose a Video System for FPV
3:56 Which FPV Cameras are compatible
4:40 How to Choose an Analog VTX
5:32 Which Radio Receiver to Buy
5:38 Which Propellers to Buy for a 5" Freestyle Drone
5:49 Which Motors to Buy for a FPV Drone
6:10 Which Batteries to Buy for a FPV Drone
6:28 Different Motor Sizes for 5" Freestyle Drones
6:39 Which KV for 4S and 6S
7:05 Where to Buy FPV Drone Parts
7:19 What Tools Are Needed to Build an FPV Drone
7:33 Assemble FPV Drone Frame
• Volador Frame Build Tu...
7:51 Do THIS Before Soldering Anything
8:07 Problems I Found During Dry Fit and Solutions
8:47 How to Solder an ESC
9:59 Which Capacitor to use on an FPV Drone
10:18 Where to solder Capacitor on an FPV Drone
10:38 How to Install Motors on an FPV Drone
12:10 How to Solder Motors to an ESC
13:00 How to Install Battery Lead on a Drone
13:23 XT60 Connectors Explained
15:44 Solder Analog FPV Camera to Flight Controller
17:32 Solder Analog VTX to a Flight Controller
19:28 Mount the VTX to the Frame
20:08 Wire up ExpressLRS Receiver
22:20 Check with a Smoke Stopper before Plugging in
22:50 How to Flash Latest version of Betaflight
23:15 How to program your fpv drone on Betaflight
23:43 How to set Flight Controller Direction
23:54 How to setup the Betaflight Ports
24:02 You can use SpeedyBee App for SpeedyBee Flight Controllers
24:19 Setup Receiver in Betaflight Ports Tab
24:40 Setup Analog VTX in Betaflight Ports Tab
25:28 How to Setup the Betaflight Configuration Tab
26:18 How to Setup Board Alignment in Betaflight
27:23 How to Setup a Receiver in Betaflight
28:01 How to configure Channel Map in Betaflight
28:44 How to setup Modes / Switches in Betaflight
29:33 How to setup OSD in Betaflight
29:54 How to setup VTX Tables in Betaflight
github.com/betaflight/betafli...
31:00 Unlock SpeedyBee TX800 VTX
31:30 Configure a BLHeli_S (BLS) ESC
31:48 Flash BlueJay to a BLS ESC
32:35 How to PID Tune A Drone EASILY
33:41 How to Configure Motors in Betaflight
34:39 How to Reorder Motors in Betaflight
34:55 How to Set Motor Direction in Betaflight
35:53 My Motors wont stop speeding up
36:21 Put the Top Plate on
36:44 How to Install Propellers on a FPV Drone
37:26 FInal Thing Before Flying
37:53 Flight Test!
#FPVdrone #FreestyleFPV #BetaFlight #SpeedyBee #TMotor #FlyFishRC
🏠 Frames:
- FlyFishRC Volador VX5 - bit.ly/3ZeTlnF
- FlyFishRC Volador VD5 - bit.ly/41f00zY
🛞 Motors - 5" Freestyle (4S 2550kv & 6S 1750kv)
- Budget: T Motor Velox V2 - bit.ly/3xLLHFJ | amzn.to/3IQwHwr
- Premium: T Motor F60 Pro IV - bit.ly/3ExU0Zv | amzn.to/3EyJTUe
🤖 Electronics
Budget Stack: SpeedyBee F405 - amzn.to/3IkVaII
Mid-Tier Stack: SpeedyBee F7 - amzn.to/3IQDS84
Premium Stack: T Motor F7 amzn.to/3IPVCA9
🎮 Radio Controllers
- Gamepad Style: Radiomaster Zorro ELRS - bit.ly/3KAp66G | amzn.to/3Y32jDj
- Mid-Size: Radiomaster Boxer - bit.ly/3Zh1Tuh | amzn.to/3m4Lyu9
- Full Size: Radiomaster TX16S Mk 2 - bit.ly/3knCb8u | amzn.to/3Sq71Kg
📡 ExpressLRS Radio Transmitters
- Nano (for Gamepad Radio's): bit.ly/3INSBAA
- Micro (for Mid & Fullsize Radios): bit.ly/3xPggdr
- Radiomaster Ranger: bit.ly/3lYXcH8
📡 Radio Receivers
- ExpressLRS Ceramic Antenna: bit.ly/3lTkmyu | amzn.to/3m6JJNG
- ExpressLRS Mini T Anteanna: bit.ly/3lTkmyu | amzn.to/3KzZpTF
DISCLAIMERS:
This video and description contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission at no additional cost to you. This helps support my channel and allows me to continue to make videos like this. Thank you for the support!

Наука

Опубликовано:

 

26 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 101   
@DarrenAllatt
@DarrenAllatt 9 месяцев назад
🙋🏼‍♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV? Join 'The Hangar' 🛩 my members only community - you get: 💰 Affiliate Program 🎁 Members Giveaways & Promotions 🎓 All my existing & new Courses 🧰 All my workshops (live & replays) 🧑‍🎓 All my Tutorials 📋 All my Guides 📺 All my Videos Add Free 🎬 Directors Cut Videos ⏰ Bench Time Live Hangouts 🤝 1:1 Help/Support ‣ Go to DarrenFPV.com to join or learn more 🔗 www.darrenfpv.com/the-hangar
@JDDupuy
@JDDupuy Год назад
An absolute outstanding video! I cannot believe how well you covered this A-Z. I finished my first build last week. Been buying the BNFs which are great but they didn't teach me much. I had to watch several different videos to get smart on everything. You have covered everything great, especially the choices of hardware. This is a model video for all newbie's to watch! Great Job!
@DarrenAllatt
@DarrenAllatt Год назад
Thanks JD, glad it helped you. Yeah there was a lot to cover, and it took ages to edit to be able to get that all into a single and concise 40 min video. I hear quite a bit parts selection and compatibility is a challenge, so hopefully that was covered effectively
@kibbycabbit
@kibbycabbit Год назад
Hahaha! "Red disgusting tape, I'm looking at you, Bardwell." 🤣
@ajitt9686
@ajitt9686 11 месяцев назад
Read this comment exactly at the timing of that scene
@SWAY_ON_FPV
@SWAY_ON_FPV Год назад
i would have killed to have a video like this when I started. Great Job Darren!!
@DarrenAllatt
@DarrenAllatt Год назад
Thanks Sway
@Pislik870
@Pislik870 Год назад
Great video! This contains all the information I need to build my first FPV quad. Beautifully explained!
@DarrenAllatt
@DarrenAllatt Год назад
You are welcome
@DAKOLEK
@DAKOLEK Год назад
ONe of the best video for quad building!
@Gator-Forever
@Gator-Forever 10 месяцев назад
I think I might have burnt up a fc and a vtx on my first build because I had no ideal you had to flash them and set up esc along with vtx.Your video probably saved me a lot of cash,thanks so much for the video. You have a new fan!
@MichaelRogersJesusrules
@MichaelRogersJesusrules Год назад
Hey Darren, Its always good to watch builds, you always learn somthing new,thanx for sharing,i use to make vids and verry time consuming, even with todays tech.i just realized it was you from the other day when the quad took off at the end.hehe great stuff!! God bless n be safe.
@DarrenAllatt
@DarrenAllatt Год назад
Hey Michael, yes this took ages to put together!
@leogao1500
@leogao1500 Год назад
Thank you for this amazing video. It is going to help a lot with my first build❤
@DarrenAllatt
@DarrenAllatt Год назад
You are welcome. Please let me know if I can help
@MomoBrut
@MomoBrut Год назад
I didn't watch the video, it's long, I just went through the bookmarks. I just realized again that it's really not for everyone to be able to build a fpv quad, it's just too complicated. And this is the simplest version of the quad, it is without GPS and other things needed for example for LR. GPS problems are always on the next level. This video must scare the greenies. It is necessary to appreciate the enormous amount of work that has gone into the video so far.😎
@DarrenAllatt
@DarrenAllatt Год назад
Thanks MomoBrut... It looks intimidating to see how much goes into a drone build, but how do you eat an elephant? 1 Bite at a time. The thing is, you are going to need to learn to build one for FPV purely for the fact that even if you buy a pre-built drone, it will break when it crashes, then you will need to fix it. Knowing how to build is learning how to fix it.
@MomoBrut
@MomoBrut Год назад
@@DarrenAllatt Well, I built a lot of quads, that's why I write what I write. Putting everything in one video is I don't know how to say it, I actually said it. The rookie won't be able to understand most of the video anyway, and after half of it he'll be downright overheated. And those who are not greenies just smile and nod their heads, it's done nicely. It would probably be more reasonable to just do it gradually, do more separated videos ... but I'm older now, and maybe I perceive things differently. But young rookies just can't focus on something like that for that long.
@maikwerner7325
@maikwerner7325 Год назад
very nice build tutorial :)
@DarrenAllatt
@DarrenAllatt Год назад
Thank you!
@user-hi9kl6ls5v
@user-hi9kl6ls5v 11 месяцев назад
Man thank you so much for so much info thanks brother
@DarrenAllatt
@DarrenAllatt 11 месяцев назад
No problem 👍
@WindjumbieFPV
@WindjumbieFPV Год назад
Love building ❤
@DarrenAllatt
@DarrenAllatt Год назад
What was the last quad you built?
@WindjumbieFPV
@WindjumbieFPV Год назад
@@DarrenAllatt Not too long switched to 6s so I’ve only rebuilt recently. Latest was putting thicker XL5 V5 arms on a source one body…so far it’s indestructible😅💪🏼
@arowe231
@arowe231 26 дней назад
Awesome job on the video!! Plus thank you for explanation of the installation of props. After 4 or 5 videos, I got it down now!!!!! Whoop whoop
@DarrenAllatt
@DarrenAllatt 12 дней назад
Glad it helped!
@DarrenAllatt
@DarrenAllatt Год назад
For my next build video, what should it be? Drop your requests & parts suggestions? - What size? (3", 3.5", 6", 7") - Sub 250 Gram or Any weight - DJI 03, HD Zero, WalkSnail - Freestyle, Racing, Long Range - Full Size GoPro vs Mini GoPro, No GoPro? You tell me, what you'd like to see!
@seanpaul211
@seanpaul211 Год назад
Sub 250g DJI 03
@kibbycabbit
@kibbycabbit Год назад
@@seanpaul211 Yes, excellent suggestion! Let's see what size Darren chooses!
@chrisbee5481
@chrisbee5481 Год назад
A sub250 4" please
@DAKOLEK
@DAKOLEK Год назад
GoPro
@George64G
@George64G Год назад
Walksnail 250
@Charlvdwalt073
@Charlvdwalt073 10 месяцев назад
AWESOME THANK YOU CHARL SOUTH AFRICA 😁😁😁😁😎🙏🙏🙏💪
@BillyHopscotch
@BillyHopscotch Год назад
Thanks!
@DarrenAllatt
@DarrenAllatt Год назад
Hey, thank you so much for the super thanks! I do really appreciate that. Please let me know if you need any help
@MadDragon75
@MadDragon75 Год назад
Bardwell's infamous red tape. 😁 he uses cloth tape too. 😉
@MrLeeroyfpv
@MrLeeroyfpv Год назад
Wow man wot a video im gunna build my own now thanks to u my man please do one with dji 03 unit and crossfire cus thats wot i wanna build lol ❤❤❤❤❤ well done man awesomeeee vidddd
@DarrenAllatt
@DarrenAllatt Год назад
Thank you! Happy building!
@tristanturner
@tristanturner Год назад
I need this for a 3 inch to. This video was great
@DarrenAllatt
@DarrenAllatt Год назад
I have that coming up in the next month or so, just awaiting for the frame after Chinese New Year.. Make sure you are subbed to find out when that video drops!
@t0tobi
@t0tobi Год назад
@@DarrenAllatt Whats your Frame of choice for 3"?
@DarrenAllatt
@DarrenAllatt Год назад
I haven't like 3" since 3.5" became a thing. it used to be the Micro Apex, which is quite heavy for a 3" build, but QuadMula are sending me the Siren F3 (3") for another build video, so we will see how that goes, it looks very promising!
@skannerss
@skannerss Год назад
GRAZIE!!
@DarrenAllatt
@DarrenAllatt Год назад
Prego!
@tksamac
@tksamac 7 месяцев назад
Superb video. With that said, is there good instruction on going from BetaFlight to INAV with this setup?
@DarrenAllatt
@DarrenAllatt 7 месяцев назад
I don’t fly iNav and it’s a PITB to setup. If you just want return to home, betaflight can do that and do it well… inav also has some build requirements such as positioning of the GPS etc.
@andrewholzschuster427
@andrewholzschuster427 Год назад
Can you toggle horizon mode, angle and air mode in beta flight, great video helped me out tons, and is it hard to get a drone permit in Australia??
@DarrenAllatt
@DarrenAllatt Год назад
Yes you can toggle them on in BF, just set the switch in the modes tab. To fly in Australia you need to be a member of the MAAA and fly at an MAAA airfield with a spotter. But if a tree falls in the woods and no one is around. Did it fall?
@seanpaul211
@seanpaul211 Год назад
Is the speedybee F7 v3 stack pin out the same as the DJI 03 air unit wire to just plug in no soldering?
@DarrenAllatt
@DarrenAllatt Год назад
I know on the F4 it is, so I’d assume the F7 is too. Check the diagram on their website to be 100%
@mr.beems_0079
@mr.beems_0079 Год назад
Hello sir I have a question where should i connect ibus reciver to f405 v3 flight controll
@DarrenAllatt
@DarrenAllatt Год назад
Hey! I would try either the SBUS Pad or an RX Pad. That's not something I am used to as it's not common in FPV, so you may need to goggle that
@lawrenceplaysph6966
@lawrenceplaysph6966 5 месяцев назад
my tmotor 2207 v3 1950kv is hot after every flight, i set the motor timing to medium same as the video. Does that affect the temperature?
@DarrenAllatt
@DarrenAllatt 5 месяцев назад
When you say hot, how hot? They won’t be “cold” or pre-flight temperature as you have 26 volts running through them and they are spinning at 50,000 RPM. Also what quad are you using and how much does it weigh?
@flat-earther
@flat-earther 11 месяцев назад
How to use the S9 pad on speedybee f405 v3 for PWM output?
@DarrenAllatt
@DarrenAllatt 10 месяцев назад
I’m not google mate.
@BigJ_FPV
@BigJ_FPV Год назад
Can you try to give an estimate of about how fast this drone might go on 6s? I’m debating if I should build my own drone or just buy a Nazgûl Evoque.
@DarrenAllatt
@DarrenAllatt Год назад
This drone or a Nazgûl Evoque would go the same speed. Top speed would be 120km/h If you are looking for speed, you want a 6S Racing Drone. Building vs buying, you get better quality for the same price.
@dma_k
@dma_k 8 месяцев назад
It is worth mentioning at around 8:30 about signal polarization. I see that your receiver has right-hand polarization (RHCP), the same antenna should be on your googles. Also let me know which of two is most common? Thanks!
@DarrenAllatt
@DarrenAllatt 8 месяцев назад
Typically for Analog and HdZero you use RHCP and for DJI and Walksnail it’s LHCP.
@DarrenAllatt
@DarrenAllatt 11 месяцев назад
Learn to build a 5" Freestyle FPV Drone: www.darrenfpv.com/5-build-course With specific courses for each video system: ‣ Analog ‣ DJI O3 ‣ Walksnail ‣ HD-Zero
@Kyldrake
@Kyldrake 6 месяцев назад
Which soldering iron do you recommended?
@DarrenAllatt
@DarrenAllatt 6 месяцев назад
TS100
@christopherbuga3608
@christopherbuga3608 Год назад
can i use 6s 1550 mah 130c batteries on a 5 inch buuild with 2207 1850 kv motors or will a 1550 mah be to big and heavy?
@DarrenAllatt
@DarrenAllatt Год назад
Yeah it will be fine, just on the heavier side
@ttaylor9916
@ttaylor9916 4 месяца назад
i recommend you suggest what wiring to buy
@ttaylor9916
@ttaylor9916 4 месяца назад
what gauge, twisted or solid core .....
@DarrenAllatt
@DarrenAllatt 3 месяца назад
26AWG silicon. Get the kit I show off Amazon.
@noahlee4933
@noahlee4933 Год назад
In firmware Flasher on beta flight I have selected my correct flight controller (Speedybeef405V3) and the latest firmware version for the board next I load firmware [online] then flash firmware and then I get Failed to open serial port. Im not sure what’s going on.
@DarrenAllatt
@DarrenAllatt Год назад
Can you connect to Betaflight normally ?
@noahlee4933
@noahlee4933 Год назад
@@DarrenAllatt yes
@DarrenAllatt
@DarrenAllatt Год назад
@@noahlee4933 try holding in the boot button on the FC as you plug in to usb, should go into DFU mode
@donaldfisher718
@donaldfisher718 Год назад
How long does this fly for? Just curious. New to the “drone life”
@DarrenAllatt
@DarrenAllatt Год назад
So, most FPV Drones, like this one are designed for performance not efficiency. This is a freestyle drone, so it’s acrobatic and gets around 5-8 mins of acrobatics depending on how much you push it.
@user-vs5rb6ug2l
@user-vs5rb6ug2l 2 дня назад
03:44
@vax_ta
@vax_ta Месяц назад
If I use 1750kv motors and 4s battery is it wrong?
@DarrenAllatt
@DarrenAllatt Месяц назад
Not wrong, just under powered. Those motors are ideal for a 6S power source.
@vax_ta
@vax_ta Месяц назад
@@DarrenAllatt As I was told, it is the other way around. 1750kV motors cannot withstand 6s
@DarrenAllatt
@DarrenAllatt Месяц назад
@@vax_tawhoever told you that was completely wrong. You have it around the wrong way.
@chizuagugo5094
@chizuagugo5094 10 месяцев назад
Can you use a 2555kv with a 6s battery
@DarrenAllatt
@DarrenAllatt 10 месяцев назад
You can, but: a) your ESC will most likely catch fire if you don’t put a motor output limit on it. b) yes if you put a motor output limit on in Betaflight
@chizuagugo5094
@chizuagugo5094 9 месяцев назад
@@DarrenAllatt thank you so much, didn’t think you’d reply❤️
@user-vg1gq4ky2k
@user-vg1gq4ky2k Год назад
Rp1 vs Rp2 wich is best ??
@DarrenAllatt
@DarrenAllatt 11 месяцев назад
Define “best” Won’t get the Antenna destroyed in a crash, RP2 RP1 gets a bit more range due to the exposed antenna vs a ceramic. For a 5” Freestyle, I’d go the RP1
@CallesFPV-qc4uc
@CallesFPV-qc4uc Месяц назад
T6 and R6 what is TX and RX?
@DarrenAllatt
@DarrenAllatt Месяц назад
Transmit and Receive. When you wire. You wire a TX to an RX and a RX to a TX of the same number.
@CallesFPV-qc4uc
@CallesFPV-qc4uc Месяц назад
@@DarrenAllatt on speedybee not find TX or RX only T6 R6, the x is a placeholder, wire T to T and R to R ?
@divyamishra3616
@divyamishra3616 7 месяцев назад
oh no JB is in danger
@divyamishra3616
@divyamishra3616 7 месяцев назад
Oh I got a heart. My pleasure
@divyamishra3616
@divyamishra3616 7 месяцев назад
I'm from India, building my budget drone in category of racing. Here is the part list. Speedybee f405 V3 stack Readytosky gt2205 2300kv motor ZMR250mm frame 5inch triblade 2200mah 3s lipo
@saqibshams6538
@saqibshams6538 Год назад
How i access camera menu ?
@DarrenAllatt
@DarrenAllatt Год назад
Which camera menu? As in to change the camera settings, or to change the quad / drone settings
@saqibshams6538
@saqibshams6538 Год назад
@@DarrenAllatt runcam camera setting bro how to change im use same FC and camera I connected rum cam blue wire CC pad but can’t access cam menu ?
@an_o_ia
@an_o_ia Год назад
do you have also some recommendation for a drone shop in europe/ germany?
@DarrenAllatt
@DarrenAllatt Год назад
I’m sorry I couldn’t recommend one as I don’t even buy from the US stores given I’m in Australia
@aphaseelec
@aphaseelec 10 месяцев назад
​@DarrenAllatt whats the build cost in Aud?
@erikwlliampereiradaconceic4387
💨🚀🎮🥽😇😇👏👏👏👏
Далее
Why I Fly ExpressLRS, Not Crossfire
17:04
Просмотров 17 тыс.
Building the Ultimate 5-inch FPV Freestyle Drone
15:58
Просмотров 152 тыс.
Лепим из пластилина🐍
00:59
Просмотров 222 тыс.
Mixed thermal FPV - ULTIMATE Guide - InEL IR-Cam
39:29
2022 - 5" Freestyle FPV Drone Build
38:34
Просмотров 740 тыс.
Learning FPV Drone Freestyle (In One Week!)
15:45
Просмотров 415 тыс.
ОБСЛУЖИЛИ САМЫЙ ГРЯЗНЫЙ ПК
1:00
Красиво, но телефон жаль
0:32
Просмотров 1,5 млн
НОВЫЕ ФЕЙК iPHONE 🤯 #iphone
0:37
Просмотров 189 тыс.