No video :(

Beginners Guide: How To Repair And Paint Your Car At Home...

Подписаться 115 тыс.

Просмотров 17 тыс.

50% 1

**Product Links At Bottom Of Page**
Complete guide on how to repair and respray the damage on your car at home. Step by Step easy to follow process with real time commentary to guide you through each stage.
The bumper is the most common area of damage on your car. This guide shows you how to get a professional finish on your drive!
This video demonstrates how you can fix your cracked bumper by yourself at home with a simple process to get great results!
SMART Repair stands for SMALL TO MEDIUM REPAIR TECHNIQUES.
Want to learn how to spray? Want a change of career? Fancy just having a go at your own bodywork? Watch my videos! they may be the best thing you have found on RU-vid to get that great finish without sending your car away to the bodyshop!
Please like, comment and subscribe to my channel!!! CVR POV
PRODUCT LINKS:
Air Compressor: amzn.to/3kiD2ED
10M Air Line: amzn.to/3nNGCsN
Rotary Polisher: amzn.to/2XC7ilt
Electric Sander: amzn.to/3zjjnJ4
Air Sander: amzn.to/3EvV0vI
Sanding Discs: amzn.to/2XzAWb0
Polishing Pads: amzn.to/3Epa6D0
Fade Out Thinners: amzn.to/3lsfMDC
Sony ZV-1 Camera: amzn.to/3ly7N86
Heavy Duty Tripod: amzn.to/3nEkfG1

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@frankvalencia9227 3 года назад

Binge watching all your videos..awesome job!..very descriptive..glad I found your channel

@cvrpov 3 года назад

Thanks for the support man

@rickc8857 4 года назад

Thanks for sharing the step by step details and what you are thinking as you work.

@cvrpov 4 года назад

No problem Rick

@AnticipatedHedgehog 4 года назад

Rust spot repair video? Love your work and I appreciate the longer videos.

@cvrpov 4 года назад

I try and avoid rust mate. That truck video was rust.

@MrEddyz1 4 года назад

It would be brilliant if you could make a detailed video for when a rear arch body line is all full of low and high spots. Filler work, primer, how to recreate the arch line etc. 👌

@cvrpov 4 года назад

I'll bear that one in mind 👍🏼

@mikegordon7292 Год назад

Hello my u tube friend I'm from Oxford Mississippi t call me Mississippi Mike I'm so glad to find you site a have learned so so much your a Magician you can fix anything again thanks Thanks from Mississippi Mississippi Mike in Oxford Mississippi how far are you from North MISSISSIPPI I'd love to come over to your part of the country and shake your hand a buy you a take you out to any resurant on my nickel for all you have done a tutorials thanks again and how yall doing from Mississippi MISSISSIPPI

@mikegordon7292 Год назад

PS I WATCHED SO MANY VIDEOS LAST NIGHT IT WAS AWESOME MISSISSIPPI MIKE

@kianward5999 2 года назад

that is just stunning work bro what amazing results great content bro and great channel

@cvrpov 2 года назад

Thanks Kian

@kingtr3843 4 года назад

You make it look so simple

@cvrpov 4 года назад

It may look this way but every job still takes alot of concentration 👍🏼

@Waxvalet 4 года назад

Another quality video mate

@cvrpov 4 года назад

Thankyou

@kevinglennon2370 3 года назад

Wonderful job! Thank you for the video!

@cvrpov 3 года назад

No problem. Glad you like my content

@husky1232 3 года назад

Glad I found your channel very good and informative I would like to get in touch with you some time if its possible thank you for the video

@cvrpov 3 года назад

No problem

@henrikbacke-hansen7365 Год назад

Great video. Do you have a video detailing how you setup the spray gun for a smart repair?

@cvrpov Год назад

Not yet but its on the list

@mreightytwenty8709 4 года назад

Great Love to see a tour and set up of your van mate

@cvrpov 4 года назад

Needs a refit out ill probably do a vid on that

@stuartsmalley2868 3 года назад

Great video top job love the work

@cvrpov 3 года назад

Thanks bud

@Matt_3535 Год назад

Definitely another amazing work but it's nearly impossible to keep these professional equipments at home as I'm not a car painting professional. Compressor, paint gun, liquid paint, clear lacquer, sandpapers, nylon bag to cover a car, heating lights and etc :) I guess, most of amateurs can only fix minor scratches. In my opinion, Body painting needs these equipments and too much experience.

@cvrpov Год назад

It was a beginners guide to car spraying as in beginner to the industry

@denisconor648 2 года назад

Great job.

@cvrpov 2 года назад

Thanks Denis

@pablo123b 4 года назад

Can you do a video showing how to calculate ratios of paint mixing at some point? hang on wife said she is leaving cos im watching your videos again...lol

@cvrpov 4 года назад

Yes i will

@henrikbacke-hansen7365 Год назад

Super video. Are you using primer straight on the bumper without using adhesion promotor?

@cvrpov Год назад

Yes, i do recommend using an adhesion promotor tho

@kingcarper6511 Месяц назад

Hey mate do you only paint the repaired area but laqur the hole panel.also how long to you leave each coat to dry before the next thanks mate

@cvrpov Месяц назад

Yes pretty much. Always obviously make the lacquer area larger than the base/colour area. Apply 2nd coat when 1st coat is tacky... touch surrounding areas to gauge it

@AUDIS23456 3 года назад

Hi Great videos really helpful When sanding panels with scotch or 2000 paper for prep or lacquer flattening what soap do you use with water as some contain silicon I was told?? Thanks for help in advance

@cvrpov 3 года назад

I just use normal car wash soap bud.

@emre5817 4 года назад

Very helpfull video! Did you sand the base coat before clear coat? Thanks

@cvrpov 4 года назад

No i didn't. 3 coats of base with tac cloth inbetween then lacquer

@joecachia8647 2 года назад

Hi joe from Malta, first thanks for your best job but what is the reason polishing before the whole work? thanks

@cvrpov 2 года назад

It helps remove tar contaminants and doing work at lots of car sales garages u get in the Habbit of doing it to remove any polishes waxes and silicone put on by valeters

@jakovbrnic1892 4 года назад

Nice video, what lamps are you using for paint and can you do a tour of your van and al the tools you carry?

@cvrpov 4 года назад

I use infra red lamps mate. Not sure what the brand is as I've had them for years and they were second hand anyway

@Gibonz Год назад

Great video, but a shame you didnt include the POV of the polishing stage :(

@cvrpov Год назад

I have done other vids on this

@lewigas290 4 года назад

Ditto the previous comments. Love the longer vids. Just as a matter of interest how long do you leave the infra red lights on for. Is there some temperature which cannot be exceeded or is it all a bit of trial and error? Is there a point at which the paint burns? Thanks just curious and thinking of investing in some 👍

@cvrpov 4 года назад

I have a temperature sensor that you point at the panel and reads the heat that is projecting from the panel. Usually from 50-75 degrees is a suitable dryiny temperature, 60 is optimum. Each lacquer has different requirements but mine is around 15mins at 60.00 in each section.

@lewigas290 4 года назад

CVR POV That’s great info and thank you. Looking forward to the next vid already 👍

@serginhotchoww 4 года назад

Faz um vídeo fazendo a tinta e catálise dela e verniz

@serginhotchoww 4 года назад

Make a video making the paint and catalysis of it and the varnish. Brazil.

@cvrpov 4 года назад

@stringsnare Год назад

how are you liking the zv-1 camera?

@cvrpov Год назад

Really like it. I've got a bit lazy using my phone but i want to get back on the proper camera now I have a new computer for editing

@stringsnare Год назад

CVR POV, what kind of portable compressor should i get? and gun recommendation? i dont know what to get

@stringsnare Год назад

nvrmnd you got all the links!

@cvrpov Год назад

Abac 90 litre is what I used

@cvrpov Год назад

👍🏻

@adrianphotovisions2308 3 года назад

Great video, thanks. What gun settings do you use?

@cvrpov 3 года назад

All dials out

@kridcal0 Год назад

What would you suggest if the color code of the car doesn’t match the actual touch up paint?

@cvrpov Год назад

Not sure why that would happen

@atomicdetailsoc Год назад

could i follow this and do this on a bmw with alpine white 300? or will other white paints work?...great content keep it coming pls

@cvrpov Год назад

It should be exactly the same process

@poxdaccy Год назад

did you spray the entire bumper with base coat or just the primed areas?

@cvrpov Год назад

Just the primed area and then a bit further to blend the white base in

@bevant8275 Год назад

Nice vid, but i must of misplaced my van with all the pro gear in it. 😏

@cvrpov Год назад

The process is the same though..just use aerosol

@scottbacon2097 2 года назад

What pressure and mixture settings are you using on the Pro lite? Just got the same gun and setup, would be interesting to k ow. Currently using a 1.2 TE05 SRI PRO LITE. Too small for larger jobs?

@cvrpov 2 года назад

I usually have the pressure pretty high. Dials are fully out. Maybe I would change this if I was inside but it works for me outside in the outdoor environment. My pro lite is the 1.3 and does small to medium jobs pretty easily and bigger jobs also. A 1.2 might struggle

@fmautomotive3957 3 года назад

Great work 👏. What primer do you use?

@cvrpov 3 года назад

I use a 1k primer and 2k primers

@fmautomotive3957 3 года назад

@@cvrpov thanks, is it high build? Brand? Many thanks, nice channel

@kassifhussain6781 2 года назад

How much do you charge for something like this and what areas do you cover?

@cvrpov 2 года назад

Prices vary mate and not taking bookings currently but I cover Derbyshire areas

@t0mbolone 4 года назад

Hello, can i ask you, what u use for wipe after sanding primer? thanks

@cvrpov 4 года назад

panel wipe

@mreightytwenty8709 3 года назад

Hi any reason you used 800 dry soft pad, as you usually use 600 grit wet and dry after primer? Thanks

@cvrpov 3 года назад

If its just for minor feathering then 800 soft works pretty well

@mreightytwenty8709 3 года назад

@@cvrpov Thanks for your answer....that's what i do to....

@cvrpov 3 года назад

@@mreightytwenty8709 👍🏼👍🏼

@samcollinson2141 4 года назад

Which paint system do you use and where do you go to get your tinters?

@cvrpov 4 года назад

Debeer solvent from the local paint factors near me

@luisnadalllobregat549 3 года назад

@@cvrpov Why do you use solvent-based paint and not water?

@Irfan-or9sd 4 года назад

Could you recomend a good polishing pad

@cvrpov 4 года назад

I use any orange stiff pads really. Don't worry too much about brands etc

@Irfan-or9sd 4 года назад

@@cvrpov thanks

@Irfan-or9sd 4 года назад

Did you flat it down with P2000 or P1500 prior to polishing

@cvrpov 4 года назад

1500 wet and dry paper followed by 2000 abralon wet foam discs on the orbital sander

@Irfan-or9sd 4 года назад

@@cvrpov thank you Can you do a video on how to mix paint please

@daleaxe1030 Год назад

Top dog

@cvrpov Год назад

Cheers pal

@user-ci8jo9wc1k 3 года назад

Hi! How much it is work?

@cvrpov 3 года назад

Prices vary 👍🏼

@xxxSaYeeDxxx 3 года назад

Did you use 1k or 2k paint?

@cvrpov 3 года назад

@jimnz17 4 года назад

Hi mate, what PSI at the gun for base and gloss?

@cvrpov 4 года назад

I spray at about 2 bar for base and 2.5-3 for lacquer

@getmetodos9851 4 года назад

Why u haven’t aplied body filler?

@cvrpov 4 года назад

It didn't need any on this occasion

@georgefnkl 4 года назад

What laquer do you use ?

@cvrpov 4 года назад

Diamond clear from express paints

@georgefnkl 4 года назад

CVR POV cheers bud drying times and gloss levels ok ?

@cvrpov 4 года назад

10-15 mins drying and yes holds up well

@sabo9197 3 года назад

on the drive way? not allowed in EU.

@cvrpov 3 года назад

This is uk

@sabo9197 3 года назад

@@cvrpov Thank God.

@badger7769 2 месяца назад

If that was my car on the drive 2 houses away I would go crazy with the overspray all over it not good practice

@laurence6185 3 года назад

I got a feeling u can't just go out and do this it's needs practice on loads of cars first

@cvrpov 3 года назад

Gotta start somewhere!

@chrismiles7843 10 месяцев назад

That’s safe to say with anything

@Sweeperspelar 3 года назад

arent you afraid of overspray over your truck?

@cvrpov 3 года назад

Part and parcel of the job is the van becoming a cheese grater

@NDZ446 4 года назад

You need a mask all the time buddy I guess if you want to look after your respiratory lol, loving the videos, others need to know not try this at home.

@cvrpov 4 года назад

Its only when I'm recording im not wearing one. Peoples health and safety is their own responsibility and always read the tds sheets and ppe.