beginners NEVER attempt to do this!! 😭 

Lol Yes man risky indeed luckily I'm at a shop that I can do stuff like this sometime the owner looks at me crazy but he knows my end results will be good no matter what. I know it's helping guys out there so if I can save someone else the heartache and save them some money then hey all good man Thank you for watching ❤️💪🏼

I bought one after watching Triggerman. The gun lays down clear like a glass. I own a professional collision repair facility and have been impressed by the tool.

Thank you George glad you enjoyed man 🫡

You're more then welcome Brad, glad they are helping 🙌🏼🤜🏼🤛🏼

Thank you sir 🫡

Ok I'll try to add that into a vid for ya. I use high flow tips and couplers. But I'll get something going. 🫡

Awwwe shucks 🥰 thank you man. Just doing my part to help these guys and give a little entertainment while doing so. I'm glad you're enjoying the channel. I really appreciate you ❤️🙌🏼🙏🏼

Thank you man, if I would have had another pannel to spray I would have bean toast 🤣💪🏼

No I'm not really used to working with small ones, even when I was spraying at my house I had a 60 gallon devilbiss compressor. After decades of this stuff you can make anything work. As my boss always says " you'll be surprised what you can do when your ass is against the wall" 😂😂

Ohh it's up there. More then welcome man 💪🏼

People just be yapping man. 🤷🏼‍♂️ We don't 🐂 💩 over here 😉

That compressor could not supply 16psi at the gun after the motor turned on. It's probably only putting out about 8cfm max

@@davidray4655 8cfm come on David lol it gives more than that it was well over 16 it's a real power horse 😉😂😅

@@thetriggerman954 👌

Eh… that’s not what I gleaned from Pete’s video. He was able to get a great finish well below the recommended pressure which is exactly what trigger proved here. I’m sure trigger was likely spraying at close to 30psi right off the bat so it put the compressor to work right away. Personally I don’t consider either of these LVLP. Half the guns from overseas have that label associated with them but it’s not accurate.

You got it brother I appreciate you 🫡

Yea the gun is bad ass. Just not for little compressor guys

Damn, that sucks . Frustrating 😞. Glad it came out good. You definitely need a some skill to make it work. 🫡

🤣🤣🤣🤣🤣🤣 lmao man you made me laugh on that one. Farr down the airline 🤪🤪 Yeah man I've sprayed in some of the best conditions that a painter could ever spray in but I've also sprayed in some of the worst conditions like my home garage or on the side of my house with mosquitoes and flies lol so I just like to show these guys that it can be done, luckily I'm working at a shop that does not have to be 100%, so I do have room to experiment for the subscribers I don't know what the future hold for me as far as what shop I will be working in but for right now I will push it to the limit and try everything I can for these guys. And I know it's really helping people so it's all worth it. ❤️

@@thetriggerman954 It made me laugh too and i said it 😂yeah thats a great situation being able to experiment and show all different set ups, it will help all sorts of situations for people 👏

😱 $329 ain't bad

@@thetriggerman954 I'm saving my pennies for that Walcom 360 halo with that bad ass light with a distance meter built in it man it's top notch but 900 bones it's carbon fiber too.

Yea I'd say bigger used better than infused 😂😂😂😂

Thank you Des, I was spitting fumes. Aka shooting blanks 😅😭

Close call them man Wooof 🤪

Na customer pay. We hardly ever blend into the hood. Color looked good customer loved it 🙏🏼 paint Gods were on my side 😀

Damn the whole vehicle lol I can only imagine the results on that one 🥹

@@thetriggerman954 thats what i had those days... Since its my own vehicle haha the job has to be done 🤣. Sand the whole vehicle down and polish up. Oh man.. those old days. Ur video title hits it right, beginner do not attempt to try this haha 😆

That's you Steve, yea I knew it wouldn't work but I'll try it for these guys so they know not to attempt it. But it also shows that the previous gun review is actually a LVLP gun so I think it was a good comparison on the same tiny compressor. Thanks for watching my man🫡💪🏼💪🏼

@thetriggerman954 and that's why your channel is very good, Trigger! Giving and showing us people the options and scenarios! Priceless. 💯🙏

That could work. Not sure the consistency in the finish but it could definitely get you through a paint job

Yes bear getting there well the other channel has 1300 so in actuality I'm at 10,000 😉😂😂😂 But yeah man I want to see that 10K on one channel 🙌🏼

Yep me too. 🤷🏼‍♂️

Thank you man. ❤️💪🏼

Love the color what depth it has.

@@Snip59 Yeah man those three stage reds most of them have a nice depth to them. Can be tricky at times but they are more rewarding than the basic stuff lol.

@@thetriggerman954 indeed did u have to cut and buff at all.

Yes John this indeed was a risky one Lucky it turned out okay and I didn't get fired for it lol 😆

Thank you 3rekoatzz 🫡💪🏼

What up Brad You're more than welcome man, and on this particular job I really can't give you the exacts on the PSI because this thing was dropping halfway through the panel every time I looked at the gauge it was just somewhere else I kept turning it up it would drop back down so this was definitely a challenge. I normally spray it around 18 to 20 psi for base and around 27 PSI for clear those are the settings that work best for my conditions and material.

@@thetriggerman954 awesome man! I'm right there is that neighborhood! Hey thanks again for all your input!

What pressure do you suggest for 2k with lvlp Rongpeng gun please. Thank you Johann

@@johannvanderschyff7735 you know I've never actually sprayed with that gun hopefully someone here in the comments could give you an accurate setting

@@rinayharpal7695 I'm not even sure man. I don't have a measuring tape big enough for that sucker lol. But to give you an idea, I paint a full size school bus in there with the doors closed with plenty of room on the sides and top. Front and back are close. Sorry I didn't know the measurements

@@thetriggerman954not big enough measuring tape lol, nice one. Yeah i see it's pretty roomy. I'll go with what my space allows, rather have a big one that i use half of than too small 😆.

@@rinayharpal7695 I agree, I don't think I can go back to a small booth after this. I see guys paint a car and can't even fit the bumbers in the booth that would break my heart 🤣🤣

Any other way would be uncivilized 😉😂 Thank you man Glad you enjoyed 💪🏼

Nah, the color actually looked good. Sometimes it depends on the color. I'm familiar with this one so it was a piece of cake. Certain colors yes right off the bat I would just blend. You just have to know your strengths and weaknesses with your product and your colors.

I keep hearing about that gun I might have to check it out

I reviewed this gun when it first came out it wasn't 20. I said it in my video but that was months ago I forgot lol

🤷🏼‍♂️ well they know how to find me 👊🏼👊🏼🥊🥊 🤪 hunk of junks 😱

Well you got 2x the juice that I have here so let her rip 😎

@@thetriggerman954 🫡🫡

Yoooooo my man PRD couldn't cut it bro 🥹

I mean probably if you're doing this on the side the whip would be fine I've never really heard of anyone doing that I suppose it could work but I've always had a regulator on each gun

My rep was mentioning them to me, he says you can talk through it lol haven't tried yet. Is that the same one?

@@thetriggerman954 yes sir!!!! They got RU-vid videos Instead of replacing multiple filters I only replace one set between the 2 masks and the seal check button on them is crazy!!!🤣🤣

@@thetriggerman954 there is only me myself and I to talk too in the booth…. They can hear me through my mask just fine🤣🤣🤣🤣🤣

@@lukeowens3544 might have to check it out. Sounds interesting 🤔 lol thanks man 🫡

Really? 🤔🤔 Might need to check into that

@@thetriggerman954 Yeah Man I like it better then the WS400evo

😄😄 right on

@@straplyfedj sort of like a fade hair cut. To fade the new paint into the old paint so it looks as one. When you can't see where the transition of new paint to old paint is then that means you have a good "blend"

@@thetriggerman954 perfectly explained bro I understand it now! Love your channel fam. I’ve been watching alot of you, UPK, and paint society. Im wanting to get into painting cars and motorcycles and have been learning alot from yall. Appreciate you bro keep it up 💪🏾

He's on vacation. Be back for next Friday video 😉🤣🤣🤣

@@thetriggerman954 I come back then

It might be a little better. How much better is the question. The inokraft did much better on this small compressor

Lmao 🤣 man I've had that happen a few times. Actually on one of my videos they turned if off I was ready to kick some ass but they left 😒

@@thetriggerman954 oh yeah I remember you running out while clearing I think? It’s been awhile since that video. First couple time It happened so quick that I ran it everywhere I was pissed walked outside and the my co worker was like sorry I didn’t think anyone was using that.. I didn’t have to time to wait I just wiped the clear off with thinner and started over parts needs to be ready to go before the days end.

The paint is fairly wet I don't have heat so I can't touch inside the jams to remove it I just try to get the car out and the light for you guys. If you look at the very end the car is completely unmasked in the Sun for the naysayers like yourself. Have a great weekend 😉

Like opening Christmas present!

@@thetriggerman954 i know. its fine. not a naysayer. you got me wrong. i always like the content you put out. the only thing i struggle a bit with, is leaving mirrors, lights, badges, and bumpers ''on'' the prepped and paint surfaces. but hey, its all about time and budjet with the big boss. i always take everything completely off. no offence brother youre a pro. but you never worrie about the edges peeling where you cant scuff??

@@joosten1977-wz2zj everything gets scuffed pretty good. I was taking all of the mirrors, door handles off myself but it begin to get to overwhelming for me taking everything off painting all of the cars and putting the car back together I'm just a painter lol. So now I just leave it I have a prepper that has to deal with all of that stuff.

@@thetriggerman954 i know. takes a fear amount of time, but still prefer it this way. got no one else but myself. so sheet metal, bodywork, prepping, painting, and putting this shit all back togheter is the only option. that or taking orders from a boss. nah, no option. not able taking any orders. i rather struggle being my own boss.😆😆

Porphis all day

@@thetriggerman954 thanks for replying. I have purchased a 50l Air compressor, it's a TEH 420 liters a minit about 111 us gallons it has 4 motors. 10 cfm open. Do you think the porphis will be OK or is my compressor to small.

@@razer192 it sound big as hell. Should be fine. 4 motors 😲 geeesh

@@gonzaloverduzco8328 we have some ProSpray 2K epoxy then we also have some Hi-Tech 2k for regular cheap stuff.

@@thetriggerman954 you ever use speedokote high build primer?

That's what you would have done aye 🤔 let's see it Jeremy 👀

@@thetriggerman954 well each panel I would have just paused. But I get you were testing it against the other gun. Crazy you got it to spray anything at 8 psi... These days I usually spray a Titan impact 440 at 2600 psi, airless.

I use this devilbiss regulator on 90% of my guns. Nothing special just holds up forever and pretty reliable amzn.to/4brOeGg

I’m Just getting in to painting, if you had 1 gun to learn on what would it be?

@@johnsandlin09 probably DV1 "base" gun. You can spray base and clear with it and it's an awesome gun makes Metallics lay effortlessly

Sounds like an STD aye ok

Tell em man😎

Yeah man three stage red plus I had this rigged up system so you kind of have to freestyle it and go with the flow sometime the blend goes good early sometimes it goes a little further but either way I'm going to make it work. It would be cool if a customer wanted their boat painted that car man your arms will be ready to fall off after three stages of this shit on a big ass boat 😭😭🥹

@@thetriggerman954 makes sense. You made it look good! I’ve done a 3 stage white with white pearl over it but not as cool.

Yooooo what up J appreciate that my man 💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼

www.porphis-online.com/products/prd-717-vs-type

No filter and I'm using solvent base. I'm a gambling man aye 🤣😱

​@@thetriggerman954 I would say so. If that was me I would be spitting water

Yes I believe so. I have the option to use Nason clear but it's nothing that I personally would care to use. Plus I've been spraying this for 11 years now and never a issue as far as cars coming back or anything like that.

@@thetriggerman954 thanks trigger you know I respect your opinion you are a straight up cool guy…have a good weekend