Тёмный

Behold! My new lathe FINALLY - making a new stem for an Elgin B.W. Raymond pocket watch 

C Spinner Watch Restorations
Подписаться 21 тыс.
Просмотров 17 тыс.
50% 1

In this video, I introduce my Boley 8mm Geneva Swiss style watchmaker's lathe. I demonstrate how the lathe headstock is serviced and set up to be fully functional, including a custom built murphy desk. The universal jeweler's motor is also disassembled and cleaned. The first use case is to turn a brand new stem for my Elgin B.W. Raymond railroad grade pocket watch, which is created using some blued steel stock.
I am an amateur who enjoys restoring vintage watches to working order. Constructive critiques of the process are welcome. I am always learning.
Contact info: cspinnerwatchrepair@gmail.com
Many of my tools I use are affordable. If you're interested in getting started with watch repair and would like to use what I use, I've included some links below. I earn a small commission from Amazon if purchases are made using these links.
Useful Texts:
Watch Repairer's Manual: amzn.to/3knrwdG
Watchmaker's Lathe: amzn.to/3D02WGb
Tools:
Movement Holder (pocket watches): amzn.to/3H9JBUv
Movement Holder (wrist watches): amzn.to/3JeG2iv
Ceramic Tipped Tweezers: amzn.to/3QP1qMH
Finger cots: amzn.to/3CXbXzJ
Micrometer: amzn.to/3QNGN3C and Stand: amzn.to/3iIyF86
Rodico: amzn.to/3kr5RBb
Tweezers: amzn.to/3GNFEVi
10X Loupe: amzn.to/3iLfome
Levers: amzn.to/3XB4RZG
Demagnetizer: amzn.to/3ZINUhS
Screwdrivers: amzn.to/3Xr7gqo
Diamond grit sharpening cards: amzn.to/3Fpzo60
Crocker style graver sharpener: amzn.to/3ZQLe1c
Cleaning:
Mesh Baskets: amzn.to/3ITqikE
Ultrasonic: amzn.to/3wcO7wg
Mason Jars: amzn.to/3WkUfgB
Cleaning Solution: amzn.to/3XwQ16I
Rinsing Solution: amzn.to/3wdgAlA
Cleaning Brushes: amzn.to/3QPnSp8
Lubrication:
Oilers: amzn.to/3Xi8LXR
DX Grease: amzn.to/3ZO0kVU
Moebius 941: amzn.to/3Hf6g2X
Moebius 9010: amzn.to/3CVGM7Y
Moebius D5: amzn.to/3ITqikE
Buffing and Polishing:
PolyWatch: amzn.to/3XlVTja
Polishing Compound: amzn.to/3QQ1r33
Chapters:
0:00 Intro and the Problem
1:30 Unboxing the Lathe
2:55 Servicing the Headstock
6:04 Motor Work
8:12 Murphy Desk
8:52 Lathe Assembly
9:57 Graver Sharpening
10:30 Turning the Stem
11:31 End Result
-----
Prelude No. 2 by Chris Zabriskie is licensed under a Creative Commons
Prelude No. 20 by Chris Zabriskie is licensed under a Creative Commons Attribution 4.0 license. Attribution 4.0 license. creativecommons.org/licenses/...

Хобби

Опубликовано:

 

4 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 99   
@davebradford8393
@davebradford8393 Месяц назад
I don't have a watchmakers lathe, but I still learned a lot. Thanks for posting this. Now back to the 9 X 20 to make steam engine parts.
@goupigoupi6953
@goupigoupi6953 4 месяца назад
I learned that I'll never be able to do this, but I liked watching it very much.
@mikedandurand3548
@mikedandurand3548 9 месяцев назад
That lathe looks like a tool guys dream.
@RestorationWatch
@RestorationWatch 3 месяца назад
I didn't learn something, I learned lots! Thank you so much.
@WatchWithMike
@WatchWithMike 5 месяцев назад
I had to 'Spin' back for another watch of this video! It's a must-see for anyone interested in buying and learning about a watchmaking lathe.
@stanbrown915
@stanbrown915 6 месяцев назад
As a machinist of 28 years, it is my professional opinion that that is Some kinda perdy!!
@WatchWithMike
@WatchWithMike Год назад
Absolutely riveting! I really knew nothing about watch lathes… now I do! It's a beautiful tool and I enjoyed seeing you take it apart and service it. Slick trick joining the drive belt, too! 😀
@csspinner
@csspinner Год назад
Thanks, Mike! And I like your channel. - Chris
@pipodorologio1648
@pipodorologio1648 Год назад
what a stunning lathe you got mate, amazing condition for its age.
@Ritopher
@Ritopher 10 месяцев назад
I’m captivated by tools and machines. I prefer you narrating your videos!! Great setup!! Thanks for posting this. ❤
@csspinner
@csspinner 10 месяцев назад
Glad you enjoyed it! More to come
@kmalnasef1512
@kmalnasef1512 4 месяца назад
me too, I am captivated by tools and machines. is that some kind of illness?
@ruud9767
@ruud9767 Год назад
Neat job! Congratulations on the lathe. It looks truly traditional, a museum piece even, like many of your tools. I imagine their total worth must be impressive. Please say thanks for me to Mrs Spinner, who accompanies you so splendidly on the piano.
@redbxstr
@redbxstr Год назад
Excellent Chris. Thoroughly enjoyed your Lathe setup and watch stem creation. Really very interesting. Very clear and concise.
@csspinner
@csspinner Год назад
Thank you!
@brucebarlow6604
@brucebarlow6604 Год назад
You have a great set of tools and awesome work going on here. Regards from New Zealand 🇳🇿
@csspinner
@csspinner Год назад
Thanks, Bruce! - Chris from South Carolina USA
@mikemcdonald716
@mikemcdonald716 3 месяца назад
Beautiful Lathe👌
@horstb29
@horstb29 4 месяца назад
Wow is all I can say right now. Thank you for sharing with us.
@samharper4289
@samharper4289 5 месяцев назад
Nice lathe and great stem build! 😉
@jimmykao3355
@jimmykao3355 Год назад
Bravo Chris. Amazing work.
@csspinner
@csspinner Год назад
Thank you!
@JDRichard
@JDRichard 2 месяца назад
Chris, you make great videos
@JDRichard
@JDRichard 10 месяцев назад
What a great find Chris, an excellent video production
@sonnymoorehouse1941
@sonnymoorehouse1941 7 месяцев назад
It truly is a fantastic video.
@glennpearce7093
@glennpearce7093 11 месяцев назад
Nice Chris Thts going to help you in so many ways I think🧐
@pablorosales1149
@pablorosales1149 8 месяцев назад
I am in LOVE with such a so good tools. I have a complete lathe from Bergeon , from the 70ies. And so happy with it!!!
@richardhuxford1147
@richardhuxford1147 10 месяцев назад
I just purchased a peerless lathe that needs a little tlc. This video was really helpful. Thank you.
@glennpearce7093
@glennpearce7093 11 месяцев назад
Awesome 👏 bro
@SkyBlue-le7cd
@SkyBlue-le7cd Год назад
Wow, that was really impressive. It’s a totally new language to me. Thanks for the fascinating video.
@csspinner
@csspinner Год назад
Thanks. I’m hoping to feature it in more videos. I have a backlog of watches I couldn’t go any further on without one
@eugenioanido1289
@eugenioanido1289 3 месяца назад
Excelente, una pena que vivas tan lejos....
@andyvan5692
@andyvan5692 8 месяцев назад
the 'off axis' center is like that on a jacot tool, for driving the wheels, while giving room to fit the burnisher onto the pivot, the tailstock accessory holds the other end of the wheel (not being worked on)- to stabilise the axis, otherwise you can get a tapered shaft.
@billg125
@billg125 Год назад
Great video & what a nice looking lathe; you are lucky to have found one in such good condition,
@csspinner
@csspinner Год назад
Thanks, Bill!
@M_MTsc
@M_MTsc Год назад
Amazing!
@loricastro3772
@loricastro3772 Год назад
great video, thanks for share!
@csspinner
@csspinner Год назад
Thanks, Lori! - Chris
@kungfumachinist
@kungfumachinist 5 месяцев назад
I've recently acquired something closer to a 6mm Lorsch lathe that needs a lot of love. Not sure it can be restored, but there were some things you did here that help a lot with my journey, particularly the bit about fusing the cables against the hot razor blade. Thanks!
@Watcheyes
@Watcheyes Год назад
Knees felt weak when showing that Boley, what a beauty! 😮 Aha it's no ball bearings, it's plain bearings, I see, nice to see the whole process, thank you! I have an old Lorch 6 mm lathe in nice condition which needs a overhaul.
@csspinner
@csspinner Год назад
Those lorch lathes are gorgeous as well. I have a soft spot for these old machines. They outlived their original owners and will outlive us as well.
@SteelMagnolia8
@SteelMagnolia8 7 месяцев назад
Love it! Murphy table and new lathe are the bomb!
@alaindrolet_atlt_2019
@alaindrolet_atlt_2019 Год назад
Absolutely interesting video, it’s a part of watchmaking that I don’t know ! ✨👌
@csspinner
@csspinner Год назад
Thanks, Alain! It’s what I love about this hobby
@alaindrolet_atlt_2019
@alaindrolet_atlt_2019 Год назад
@@csspinner Absolutely there are so many things to learn ! For my part I made some mistake on a Waltham 1883 18s and of course I learn so much ! 🤪
@TreyLin
@TreyLin Год назад
wonderful video and the pocket watch :)
@csspinner
@csspinner Год назад
Thanks, Trey!
@sonnymoorehouse1941
@sonnymoorehouse1941 7 месяцев назад
Very nice Lathe. extremely well appointed. great video. and yeah the diamond sharpening cards are the best, very fast with HHS. and they do the job with carbide with patience, the file rest is something i lack.
@RestorationWatch
@RestorationWatch 11 дней назад
Did anybody tell you yet that the attachment @2:12 is a Jacot Pivot Lathe type attachment used for burnishing and polishing pivots yet? This is used with a bow. Ask me if you need more info, like how to used an ID card holder with retractable cord as a vastly superior alternative to a bow. The reason you need to do this manually is that burnishing is a back and forth process to case harden the surface and remove the least amount of material as possible. I'm pretty sure you have the same jacot pivot lathe as me, but not sure if you know the ID card holder tip?
@peterdewolff6650
@peterdewolff6650 11 месяцев назад
I also want such a lathe. No clue what I will do with it but it looks amazing.
@glennpearce7093
@glennpearce7093 11 месяцев назад
You could trim your nails 😂
@JDRichard
@JDRichard Год назад
That is a nice lathe you have there mister, and a good video as well
@csspinner
@csspinner Год назад
Thank you, JD! I learned some great techniques from your videos.
@thisoldwatch9944
@thisoldwatch9944 Год назад
This guys seriously a genius… i love working on watches but I would have NO IDEA how to do ANY of THAT 😂 keep up the good content
@csspinner
@csspinner Год назад
Thank you!!
@andyvan5692
@andyvan5692 8 месяцев назад
the off center bit is a drive, you use a bow, like a 1" archery bow, but of brass, this operates the gear like a foot operated sewing machine, so you can feel if something is amiss, this turns the on axis center part, by rubber belts, as you are only very lightly polishing the part, so you don't want to go too far.
@blave549
@blave549 9 месяцев назад
I loved this video. I just want to know how you know how to take all of that vintage gear apart, and more importantly (just like a watch) put it back together and have it still work.
@csspinner
@csspinner 9 месяцев назад
Thank you! I know others that have lathes and their designs are very similar. While this was my first time laying hands on this one, I had already done the research.
@briang.valentine4311
@briang.valentine4311 6 месяцев назад
Is that unknown thing you showed for holding a tool in position for lathing? How did you know the screw pitch?
@larrykelly2838
@larrykelly2838 11 месяцев назад
That is a rare lathe I would think. Could you work on a Hamilton Engineers Corps USA #531. It does run but I can't get the bezel off to pull the little tab for setting?
@csspinner
@csspinner 11 месяцев назад
Hi Larry, please send me some more details and pictures at cspinnerwatchrepair@gmail.com
@HarryLewinASR
@HarryLewinASR 7 месяцев назад
Wonderful and informative video. Where did the specs for the stem come from? What does the lathe description of 8mm refer to?
@csspinner
@csspinner 7 месяцев назад
The stems are specific to the case, but the winding square is standard for an 18S pocket watch. I designed the new stem as comparison with the original, factoring in the changes I wanted to make to the detents. The 8mm nomenclature refers to the shank size of the collects that fit into the headstock
@Watchmaker_Andra
@Watchmaker_Andra Год назад
(2:11) that is safety pulley work with tapered holes lathe center plate (2:17) and jacot drum (2:20) , you can use dog (2:07) or Bergeon 30090 to drive the parts with no spokes parts such as cannon pinion or winding stem , or use the pin on pully to drive the pars with spokes such as gear and balance wheel . You can drive that by bow like jacot tool , or you can use motor and thinner belt to drive the safety pully , and adjust the tight or loose of belt by change the angle of pully arm .
@csspinner
@csspinner Год назад
Thanks so much for the response! Makes a lot more sense now.
@jdmccorful
@jdmccorful Год назад
Looking forward to future adventures with the lathe. Found the stem build quite interesting. How did you know the correct shape required? Did you have a build drawing? Thanks for your time.
@csspinner
@csspinner Год назад
Thanks, John. For the shape I estimated based on the position of failing detent on the one I was replacing. I used a rod about the same width and surprisingly the crown threaded fine. I thought I would need to rethread it with Swiss
@DutchClawz
@DutchClawz Год назад
I also have no idea what that guy does, I was wondering the same thing when discovering my lorch
@jatco84
@jatco84 6 месяцев назад
Fantastic. Most entertaining video..especially the 'new' lathe cleaning and preping for it to be put to use. Love your new 'murphy' work bench too. How did you work the new stem to function properly without a template of some sort...- just by trial and error..? Great job. Kudos
@csspinner
@csspinner 6 месяцев назад
Thanks. Yes on the trial and error. There were parts of the old stem that I used as a reference. Made things larger than needed, then tweaked down to size for final fitment
@jatco84
@jatco84 6 месяцев назад
Well done my man. Right on. @@csspinner
@MichaelEdwards2
@MichaelEdwards2 8 месяцев назад
fantastic. Would you be able to supply the ebay seller of the graver blanks please. Currently looking for some.
@csspinner
@csspinner 8 месяцев назад
The seller is “favoriteusa”
@MichaelEdwards2
@MichaelEdwards2 8 месяцев назад
@@csspinner thank you so much
@argat11
@argat11 11 месяцев назад
What kind of steel did you use for that stem, Chris? Thanks for sharing your videos and expertise with all of us.
@csspinner
@csspinner 11 месяцев назад
Hi, thanks for the comment. I use steel rod that’s hardened and then tempered to a blue color. Allows it to be easily cut by my carbide gravers, yet appropriate and suitable for use as most watch components (balance staffs, pivots, stems, etc). Esslinger sells these and their packs contain an assortment of different sized rods
@georgewolf7063
@georgewolf7063 Год назад
I love that Murphy desk setup! I'm using a folding desk for mine as well! And, every time I try threading rods of that diameter, my material always slips in the collet unless I cinch it down uncomfortably tight. Is that normal? x.x
@csspinner
@csspinner Год назад
Thanks, George! Yes I get the same slippage unless I really torque it down. I’m always fearful of snapping the handle off the drawbar with how tight I need it to be
@georgewolf7063
@georgewolf7063 Год назад
@@csspinner Same here. x.x Or afraid I've somehow used the wrong collet, but I'm always very careful, so... *shrugs*
@BruceWSims
@BruceWSims Год назад
Not being very familiar with mini-lathes, could you give me a sense on how you determined the range for your speed settings?
@csspinner
@csspinner Год назад
Bruce, machining guidelines recommend around 700-800rpm for steel- though that could vary depending on temper. The harder the material, the slower to go (example- for blued steel I usually drop a couple hundred rpm). Something soft like brass I can get away with over 1000 rpm. Though that’s all a guideline. What I really shoot for is nice, long curly swarf from the work. If the graver seems like it’s sliding and skipping over the top then it’s likely too fast and you end up burnishing the work instead
@BruceWSims
@BruceWSims Год назад
@@csspinner Thanks so very much! That was exactly what I wanted to know. Much appreciated.
@danielowens4789
@danielowens4789 11 месяцев назад
Looks like a Jacot tool to burnish pivots??
@csspinner
@csspinner 11 месяцев назад
You’re right! I learned this lathe came with quite a few attachments sized for clicks though.
@nickhuwar7920
@nickhuwar7920 11 месяцев назад
You need a more rigid base for that lathe I’m sorry to say. The vibrations will eventually give you trouble and headaches.
@csspinner
@csspinner 11 месяцев назад
Thanks for the feedback.
@zegarmistrz2675
@zegarmistrz2675 11 месяцев назад
🙂🙂👍👍
@reeeeeem69420
@reeeeeem69420 4 месяца назад
was that a seth reference?
@mikebruegger8654
@mikebruegger8654 10 месяцев назад
Don't even want to know the cost of that awesome lathe setup and accessories.... 😢
@johndegnan5703
@johndegnan5703 4 месяца назад
Hehe.. He said "Frikkin" hehe.. Oh, "Franken" bleh
@ndspeedster
@ndspeedster 6 месяцев назад
Funny how you say you don't do this professionally or anything. But you have thousands of dollars worth Of tools to do all of this stuff
@1sashimi11
@1sashimi11 11 месяцев назад
Omg, my heart stopped at 5:09 when you start hitting onto the back side of the conical bushing... That shaft is keyed and the bushing needs to fit into the key (I hope you did that, it is hard to tell from the video). In no event, should you go straight to hitting the headstock with wood/bronze/brass as you will risk damaging the thread and jamming the bushing.
@csspinner
@csspinner 11 месяцев назад
Everything was aligned before I started tapping. It’s all friction fit together, tightly. This was a similar process to other literature and guides for headstock servicing. Can you recommend an alternative approach? Lathe has many hours on it since then and no issues.
@1sashimi11
@1sashimi11 11 месяцев назад
​@@csspinner Not sure how to describe without an image, but at 5:11, when you place that brass part at the end of the shaft, you can see it sits very high - the reason for that is that there is a key on that conical bushing that you need to align with with the shaft slot - you shouldn't need to tap that back part in as it is actually the nut that controls the friction (when you spin the shaft at 5:17 you can see the keyed slot briefly under your fingertips).
@csspinner
@csspinner 11 месяцев назад
@@1sashimi11 yea I get what you’re saying. I definitely aligned the slot. But there’s no way it would press in all the way without tapping it in. I had it apart some time after that and the key was still there 🤷‍♂️
@csspinner
@csspinner 11 месяцев назад
@@1sashimi11 also here was one of the references I used to learn how to assemble a headstock. He also points out the key, aligns it, and still needs to tap it into place. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DL6oKA8vXs0.html
@csspinner
@csspinner 11 месяцев назад
@@1sashimi11 anyway you’ve always given me good advice, so I trust your opinion on it. I will have to see if I can drive it home with just screwing on the nut next time I need to reassemble
@brizzell2101
@brizzell2101 9 месяцев назад
Horology I'm just here for the tools!!!!!! Tip for single guys.. watch the lid coming up in a restaurant and tell cute girls to "hey watch this!"
Далее
The past and future of Pringles🥔
00:18
Просмотров 1,7 млн
Вопрос Ребром - Ирина Мягкова
42:15
Wolf Jahn Geneva-style 8mm Watchmaker's Lathe
24:18
Просмотров 6 тыс.
Lorch 6mm Watchmakers Lathe - Part 1 - Overview
17:56
Просмотров 156 тыс.
Watchmakers lathe - How to turn Basic Cuts
16:28
Просмотров 196 тыс.
At What Height Does my Iphone Break?
1:00
Просмотров 13 млн