Belarus MTZ-82 Front Loader Part 1 

Assembly was quite OK, only that the manual was missing and a lot of simple things I had to improvise without manual. So it was quite time consuming to install for the first time without proper manual.

Sure. There will be part 2.

Part 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q73yRV_2gW8.html

Спасибо. Наконец моя мечта сбылась.

Thank you.

I will make a better review about the hydraulics, there was total makeover of the whole thing. But basically yes, pump is feeding directly the loader hydraulics and tractor hydraulics is connected through the loader hydraulics. It's a joystick operated loader (with cables).

Part 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q73yRV_2gW8.html

Story is quite simple. The new type starters are with planetary gears (not direct) and you don't need a tank size battery to start it. For the new starter normally 100Ah battery is enough - in cold climate more Ah to compensate the cold bite. And it's all 12volt.

I will make the video when it's warmer outside. It's still very cold and I have the bonnet covered on the tractor right now. So until stay tuned and see other videos :)

Part 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xzd5QZsJ4f4.html

в документах есть номер двигателя (если номер кадра не отображается).

br syta szkoda że już nic typowo polskiego nie ma ,ale akurat metal fach to fuszerka

Около 4000 евро.

Milline nendest vanadest asjadest lukusti oli? Ma viskasin kõik, mis vähegi asjaga kokku ei puutu minema, vana hüdro (koos haardekaalujagajaga vms) tekitas ainult probleeme. Nüüd on üsna hea juba, pump vajab veel vahetust ja loodetavasti sai voolikud piisavalt jämedad, et suurem kogus õli ka läbi mahyb.

Haardekaalujagajaga on istmeal tagasilla peal, See on jah suht mõttetu asi sedab haiskade liikumist töö tegemise ajal. Hüdrolukusti on see asi mis on seal jagaja kõrval hüdropaagi küljes. Sees istud traktoris siis parema ukse poolt teine kang on hüdrolukusti oma, teised 3 on jagaja omad. Tõmbad lukusti kangi keskele ja ei sega haiskade üles alla liikumist, lükkad ülesse peale selle kangi, siis on nagu lukk peal ei lase haiskasi alla vajuda. Tee peal sõites on hea, kui traktoril midagi taga on asi ei vaju sõiduajal alla. Haardekaalujagajaga ja hüdrolukusti on 2 erinevat asja need ei mõjuta teineteise tööd.

Tänud info eest. Seda on hea teada. Lisaks on minu omal seal taga veel mehhaaniline lukk. Tõstad aisad üles ja saad lukku panna. Õnneks läksid kõik jupid juba vanarauda ja ma ei saa neid enam tagasi külge keerata ja nende pärast muretseda.

I have never seen this Padagas loader, sorry. I know many guys who are using the same Metal Fach loaders without any problems. I am sure there are many loaders to choose from. I just took whatever was popular and recommended here.

Well i haven't seen a Padagas loader,and well from what i heard,the metal fach loader is a good loader,and also these metal fach loaders often come new with a new belarus or an Arma trac,so well they are good,but i would want to hear from hrz4x4 after a good use,what he thinks of it,if its good i might get one for my belarus someday aswell!

Well. Some of my neighbors and friends have used the same loader for years and they recommended.. So I hope it will last a long time and help in the farm.

Yeah,but i looked at my belarus and the frame has been broken before i bought it,it works fine,but and also i would have to take of my "bullbar"i don't know how to call it exactly,and i have to take the light from the side of the hood of and put them somewhere else,so if im gonna ever get it,then ill have probably bought another belarus,it wouldn't be hard to take all of it of to put the loader on my belarus,but the "Bullbar" is very usefull so if i have to take it of,then well eh.So for now my JUMZ will ,do a lot of the work!

What is this bullbar you are talking about?