Тёмный

Bending Poles for Hoop Houses 

Bootstrap Farmer
Подписаться 25 тыс.
Просмотров 116 тыс.
50% 1

The strength and interior air volume in hoop houses are made possible to the millennia-old building shape, the arch. Pipes equally bent into roughly half circles are very strong, especially when properly connected. Arches evenly distribute weight and live loads (wind) to the ground posts and in turn the ground.
For more info, visit: www.bootstrapf...

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@chevrelait
@chevrelait 9 месяцев назад
for small projects, experiment with a few gray electrical conduit pipes... they fit together and the curve profile can be checked easily
@Yelnats101
@Yelnats101 3 года назад
Bent my own pipes with the same bender. Was simple and everything bent perfectly.
@pookinsp2324
@pookinsp2324 8 месяцев назад
Could Bootstrap Farmer's 20-foot bender be used to bend hoops for a "gothic" style hoop house 14 feet wide with a ridge at nine feet, six inches (9'- 6")?
@BootstrapFarmer
@BootstrapFarmer 8 месяцев назад
No, but we do have a gothic bender coming out soon. Should be 30 days out or so.
@pookinsp2324
@pookinsp2324 8 месяцев назад
I have heard that some people have obtained a "more uniform/perfect" bend (almost a factory bend) by attaching two (or three) 10-foot sections together and continuously bending them through the Bootstrap bender, rather than bending individual 10-foot sections of pipe and then joining them together. Has Bootstrap Farm confirmed success with this "continuous" approach to hand-bending to reach a more perfect arch? Thank you for this very helpful instruction video.
@BootstrapFarmer
@BootstrapFarmer 8 месяцев назад
It is possible if bending sideways but that does increase the likely hood of twisting the hoop unless very well supported. As always these are many ways to achieve a goal that varies with skill level.
@chadolson6889
@chadolson6889 2 месяца назад
On the first pipe you indicate a mark 9 inches in. Do you do the same for all 3 poles when using the 20 foot bender? Or the 2nd and 3rd posts have marks every 18 inches and no 9 inch mark?
@BootstrapFarmer
@BootstrapFarmer 2 месяца назад
You do the same thing for all three poles.
@ge7ea
@ge7ea 2 года назад
I’m wondering on the 20’ bender specifically, are you to measure 9” from swag end then every 18” to the end?
@BootstrapFarmer
@BootstrapFarmer 2 года назад
Correct
@kevingibson9453
@kevingibson9453 2 месяца назад
I would just like to find it so I can buy a set of them but I don't see it in the store
@BootstrapFarmer
@BootstrapFarmer 2 месяца назад
Here is a link: www.bootstrapfarmer.com/products/greenhouse-hoop-bender
@terrywoolard3563
@terrywoolard3563 4 месяца назад
How do you contact your company to purchase a pipe bender
@BootstrapFarmer
@BootstrapFarmer 4 месяца назад
You can call 888-406-1982 email contact@bootstrapfarmer.com or visit www.bootstrapfarmer.com
@johnpaul-mp7zc
@johnpaul-mp7zc 4 месяца назад
Hi question is do you put the measurements mark on the far side of the collars edge or the inside of the collars edge?
@BootstrapFarmer
@BootstrapFarmer 4 месяца назад
Inside collar.
@1231dre
@1231dre Год назад
When bending pipe for my 20 foot hoophouse, how many times should I bend at the 18 inch mark? (Should I bend 3,4,5 times?)
@BootstrapFarmer
@BootstrapFarmer Год назад
6 times until you reach the end of the pole.
@CharlesNewkirk-sb5qs
@CharlesNewkirk-sb5qs Год назад
Thanks!
@samdotson7297
@samdotson7297 Год назад
in the video you mention to measure the "distance" of the first hoop. What is the correct distance of a 20' hoop when it is laying on the ground not under tension?
@BootstrapFarmer
@BootstrapFarmer Год назад
Given that this is a hand-bent, non-machined outcome it varies by 18-24" or so.
@Allis1isAll
@Allis1isAll 2 года назад
Whst if I don't know what hoop bender size i have , I bought an entire set up no specs
@BootstrapFarmer
@BootstrapFarmer 2 года назад
Hard to say without more info. If it isn't one of ours it would be hard to say. Ask the seller?
@wynnyoder5605
@wynnyoder5605 2 года назад
is she speaking diameter or radius?
@stephenjacobs6471
@stephenjacobs6471 2 года назад
I'm interested in the 12 ft Bender let me know how to get a hold of you so I can order one
@BootstrapFarmer
@BootstrapFarmer 2 года назад
www.bootstrapfarmer.com/products/greenhouse-hoop-bender?_pos=1&_sid=84557ad44&_ss=r&variant=41541993857182
@stephenhiggins8744
@stephenhiggins8744 2 года назад
I want a 42' wide hoop house that's around 30' tall. What size pipe do you think it would need?
@BootstrapFarmer
@BootstrapFarmer 2 года назад
We cannot advise on specs outside of our own plans. You would need to check with a structural engineer for all considerations.
@ryanhanes1852
@ryanhanes1852 2 года назад
I forgot to mention that since we’re calculating for elliptical quadrants I made your minor radius 21’ bc it’s half of your diameter(base in this case)which is 42’.
@stephenhiggins8744
@stephenhiggins8744 2 года назад
I plan on having the base 12' high, using telephone poles. Which are given to me.
@ldtexas1648
@ldtexas1648 2 года назад
Is your website down? Can't get on it.
@BootstrapFarmer
@BootstrapFarmer 2 года назад
Just checked, all good over here.
@ldtexas1648
@ldtexas1648 2 года назад
@@BootstrapFarmer Ok. Thank you. Must be my bad reception out here in the country. Was just curious how much the 15 foot radius manual pipe bender is.
@BotasULU
@BotasULU Год назад
Thank you👍
@josue6359
@josue6359 3 года назад
Excelente. Saludos
Далее
Hip, Baseboards, and Ridge Poles for Hoop Houses
3:22
Лиса🦊 УЖЕ НА ВСЕХ ПЛОЩАДКАХ!
00:24
Лучше одной, чем с такими
00:54
Просмотров 654 тыс.
Low Tech ~ Bending Tunnel Frames.... The EASY Way.
3:00
Hoop House Ground Posts & Hoops
5:44
Просмотров 32 тыс.
Make Greenhouse Wind Braces and Cross Braces
15:02
Просмотров 15 тыс.
How to Bend Pipe For DIY Greenhouse Build
8:10
Просмотров 334 тыс.
How to Bend Poles │ DIY Greenhouse
7:33
Просмотров 50 тыс.
Bootstrap Farmer DIY Hoop House Quick Start Guide
5:18
Лиса🦊 УЖЕ НА ВСЕХ ПЛОЩАДКАХ!
00:24