bernette embroidery software Customizer: stitching out a design 

Thanks and welcome! 🥰

Claro que sim, a máquina costura reta e zigzag também além de muitas outras lindas pontadas. Por favor, contacte o seu revendedor bernette mais cerca (www.mybernette.com/it-IT/Ricerca-negozi.html) pela informaçao de preço e para combinar uma hora de experimentar pessoalmente esta linda máquina. Cordialmente, BERNINA International AG

Sou de Curitiba, comprei a Chicago 7 na Joca máquinas... Paguei R$3390,00

Dear Margrieta, we assume that you forgot to change the hoop size in your machine settings. To choose the correct hoop size, simply press the corresponding key on the screen of the deco 340. If this doesn't help please contact your bernette dealer who will be happy to help you. Kind regards

Dear Macarena, he setting depends on the used fabric, thread but also on the embroidery design In general, I would start with the default setting. This is 4 on the Chicago machines. If the lower thread is visible on the top, you can reduce the thread tension.

@@Mybernette Thank you very much, as a newbie I read somewhere that one should use the lowest tension possible to embroider, I reduced it to 1 and I made a huge mess!!! so Im so gratefull for your advice. If I may ask another question. While embroidering with a 3 or 4 tension, the machine makes wonderfull stitches in all directions but one; in a certain diagonal angle it makes loose stitches. so for now Ive solved it turning the design upside down and stitching it like that (but that means loosing the first attempt) any suggestions? have you seen this before? thanks

@@Maca475 The stitch result is influenced by the stitch type and also the stitch direction. To turn the design may help to get a better result or when stitching a larger object adjust the thread tension for this part of the design.

Hi Amanda, we always use a polyester embroidery thread as it is shiny and causes no problems with thread breakage during the stitching out. For the bobbin we use bobbin fil, available in white or black. A good overview can be found at www.threadsmagazine.com/item/4574/choosing-machine-embroidery-threads/page/all

@@Mybernette This link no longer works and or the page is no longer available.

@@MsKathy07 Here's a new link that will hopefully stay: www.threadsmagazine.com/2008/11/02/choosing-machine-embroidery-threads Happy stitching!

Estimada Senhora, sim, e posível bordar matrizes do Embird com a Chicago 7 em vez de utilizar o bernette Customizer Software. Você somente precisa utilizar o formato .exp. Também é posível abrir formatos .exp no Embird, so não é posível guardar desenhos da máquina num pendrive. A Senhora mora onde? Vem experimentar a Chicago 7 no studio BERNINA o mais próximo da sua casa. Brasil www.bernina.com/pt-BR/Localizador-de-Lojas-BR Portugal www.bernina.com/pt-PT/Localizador-de-Lojas-PT Lhe desejamos já grande alegria com a sua nova Chicago 7. BERNINA International AG

Dear Denise, when we launched the Customizer Software, most of the computers still had a cd drive. You can use an external CD drive or ask your dealer if he can help and save it on a different data carrier. You can use the following link: www.bernette.com/dealersearch

Hi Jennifer, can you please email to mybernette@bernina.com and let us know which country you live in, where you have bought your machine and where exactly you asked for support? We will then pass the information on to the local distribution organization which will hopefully solve the problem.

@@Mybernette chicago 7. I read don't put stiffner stabilizer in hoop. Put under it.

@@marthayoder7995 Dear Martha Yoder, we don't understand your question or input. Can you please explain what you mean and to which part of the video above you are referring?

Hi Eileen, it's hard to solve your problem from the distance. Please get in contact with your BERNINA dealer or your local BERNINA country organization: bernette.com/dealersearch). I'm sure the dealer can help you with the embroidery foot.

Olá Denise, o personalizador foi vendido como um pacote com a máquina em alguns mercados (mas não em todos). Para mais informações, entre em contacto com o seu revendedor de máquinas de costura - ele terá todo o prazer em ajudá-lo! O único download disponível é o ArtLink, que pode fazer menos.

Basically, if there are no instructions for oiling in the user manual, this should be done by a sewing machine technician. In this case, please contact you dealer.

C’est un non-tissé (entoilage) pour stabiliser le tissu. Dépendant de tissu , il y a des non-tissé qu’on peut arracher ou couper après ou des hydrosoluble. En espérant que mes instructions aient pu vous aider Cordialement,…

S