BEST Black Trim Restorer in the Auto Detailing Industry | Unbelievable. 

Been needing to see a video like this. Was tired of using "trim restoring" products only to be annoyed by how long it doesn't last, and whenever it rained the product would smear and leave an ugly oil trail. Thank you sir as a fellow Tennessean.

So far that’s the best results on trim restore I’ve seen. Most products make the plastic shinny but the fade it still there. The back to black products continue to bleed into the paint near by when doing polishing on white paints is annoying. I’m gonna try this product for sure.

Thank you for this video that has permeated my brain. The porous info makes sense. I love that you did a side by side. THANK YOU FOR THIS VIDEO!!

I've already known about this product, but haven't used it yet. You are the first I've seen not tape around all. And the first to wipe immediately, with no wait. I hope anyone who watches this understands......... finding that out made this video so amazing! Even if you already are aware, but about to try the product. Thanks man.

I bought the big bottle of Solution Finish Black Trim Restorer for about $50 or so. You really need very little so I still have lots, it will last me 20 years for sure. I'll do it twice a year. I cleaned the rubber, not nearly as well as in the video, but still pretty good. Dabbed a bit of it onto a terri-cotton cloth in it, and rubbed it along the rubber once. It works pretty much instantly and then buffed it off with a dry cloth. It looks fabulous. You can do a whole car with about five dabs. Its super easy to apply and to clean up. It wipes off metal with no problems. I didn't really need to do it again but I did anyway because I have so much of it. I store the car during the winter so I don't know how it would handle a Toronto winter. It's worth it if your car is.

Thank you! This is exactly what I was looking for!

Thanks for explaining because.. I never understood why the restoration liquids/wipes wasn't working so now I understand I need the black restoring paint first then the other stuff to maintain it.

Greetings from Ghana, west Africa Dr. Luke Wilson....Your video's are so Insightful and Detailed....Would love to see you review the highly Acclaimed 'Lithium Trim Serum' and also make a video on how to restore scratched 'Glossy' car interior plastics......Maximum Respect!!!

Awesome video again Luke. I use solution finish too and I agree with all the points you made. Good stuff.

Great info brother I’m new on trying to keep my personal car up to clean and good looking standards 👌🏽

Amazing! Great vid as usual

I wish I had seen this video back when I had a Wrangler. Good job.

I have the exact Honda and was looking to fix thr exact issue. Thankyou!

I do agree. Best restorer out there. A true restorer. My wifes cousins xterra trim was severely aged (it was a light gray in color) and her husband struggled with a restorer. I applied SF on the trim and she was amazed on the contrasting results but she was even more amazed on the ease of application and how “clean” the end result ended. I was even blown away as the trim was the worst trim I have ever applied SF to. 👍🏻

Great video Luke. I had this on my list to purchase. My trim on both my vehicles are starting to fade and I'm glad you made a video on. Reinforcing my need to order. I will use your link. Thank you.

Thank you for this tip. Seems fairly easy to do. I appreciate it!

Love the 80's casio calculator watch man

Thank you ! I tried it, did the prep and application according to directions, it lasted 3 washes and one month.

Thank you so much for this video!

What sold me is that you did it on an old CRV. Which is what I have. There is so much black plastic trim on that car. It's a huge part of the whole look. And if it's gray, it just stands out. I was going to replace the bumpers, but I'll try this first. Much cheaper.

That intro threw me for a loop. I drive the same CRV and have a big scrape on the panel you intro with that I'll be working on/restoring tomorrow.

Awesome video awesome product definitely buying ASAP

I always listen to the pro's. You're a pro. I have a 2002 Ford Escape. A lot of black trim. I used Mcquires Black last time. Like you said it takes a lot of time to complete it all and make it look back to factory. The Mcquires handled the rain and sun of Florida for a month maybe two. I am going to go with your dye next. Thanks for teaching me something and have a good day. God Bless you and your family.

Awesome video! Going to look into this👍✊

I've watched so many videos on this subject and I think I have found what I was looking for. I've been convinced that there MUST be a way to dye plastic. Thank you!

Been watching your videos for year's, enjoyed the shot of your junk area😊

Nice product. Great Vid, thanks

Love your videos, hope you’ll look at Rustoleum wipe new as well. I started using and still use solution finish on occasion from Luke’s video on it in the past. What I found , it fails over a relatively short period reverting to the original full oxide finish hence I had to continue to use. ( Admittedly that might be because I had to wash or rinse my car off daily as I drive it professionally) Rustolrum wipe new actually dissolves the oxide surface and restores it. On my BMW X3 I used it once and never again! I sold it about year later and never touched it besides washes.

Thanks for showing us how Solution Finish - Black Plastic & Vinyl Trim Restorer works

Great advise! What product can I use to protect and enhance the exhaust cover and winglets on my Ducati Panigale V4? Thanks

I have used the product and your advice about use a little at a time. My 1st time my so called little covered the whole job.

When the outside black trim is restored on a vehicle, that vehicle looks new. It looks good. New again.

I have used this product on my Toyota FJ Cruiser and it might not last forever but its the best one i have used so far, and i have used many.

Thank you for the info! Great presentation!

He did take his sunglasses off. I think your video was very informative and good. I will buy the product via your link. Thank you for your knowledge.

Question I need to ask...How long does it last? All finishes make black trim look better-great at first application but how is it long term? Weeks/ Months? or longer? Also living in a hot dry climate how does it stand up to rain, snow & such? I like dyes much better than dressings, one coating I don't like which a lot of people do like is CeraKote but it leaves a gloss finish like the trim has been painted gloss black. I use Forever Black (it's a dye too) but there's one drawback which is it sticks to whatever it touches (don't get it on your paint!) but it lasts for me a year +.

Yo I love that product!!!!!!! 😱 I'm going to look into it and buy!! 👍👍

Nice, good presentation - factual to the point! couldn't figure out product link? Bob & Nanc

Would it then be good to put some trim protectant on top of the Solution finish? Just wondering how to make it last as long as possible, or maybe when (if needed) to do the process over. Thanks for a good video.

Thanks for sharing!

Great video can i applied a trim coating after use this?

Hello, this is the 2nd time watching this video. I have a question on rock chips on black mouldings which after a while the area appears almost grey. I am on my 7th Jeep products since 2014, the mouldings behind the rear passenger doors receive the most abrasions along with a rough feel to the fingers. I use CG VPR ( as per your video on VPR) on the trim on my wife' Jeep Cherokee Elite since she's always busy. On my Jeep Cherokee Elite I use Griot's Black Shine since I can allow 24-48 hr's for cure time. Short of bringing my wifes car to a Collision Shop to buff out, what would be your suggestion to restore and advoid additional abrasions to this area on the car. Thank you.

Valet pro - black to the future, brilliant stuff

This is all fun and great but the best plastic restorer I ever used was a heat gun. Harbor fright special of $9.99, set it on low and slowly move around the plastic it does take some time but it is restored forever, of course i do follow up with chemical guys VRP and it looks amazing, you could use the restoration product since the pores are open on the plastic from the heat and then once it cools the product seeps deep into the plastic

Rain streaks are a leading complaint with restorers. Does this product streak after rain or wash off after carwashes? Im sure alcohol wash test is one thing but washing and rain is another. Thanks for your response!

Solution Finish has made me *so* much money. Dozens of vehicles, thousands of dollars. I paid around $25 for a 12oz bottle years ago. I have not even used half of the bottle. 👍👌✌

Thanks I've been looking for this forever 😊

Hey Luke keep up gd work and stay awesum

When this product starts to wear out can you apply over existing areas that appear to be in good shape?

Great video Luke!! Totally Diggin The Casio Watch!!

Either smooth or textured works for me

Great video👍🏻

Applies the same as gtechniq permanent trim restorer. Had good results using this

How long does it lasts before you have to do it again?

If you do it in sections and overlap a section you’ve already done, can you tell? Does it cause high and low spots?

What’s an acceptable UV dressing after treating flares with this stuff??

awesome...You think 1 bottle can do 2 bumpers and 2 running boards?

I love that solution! I bought last time you recommended and it did wonders on my 2008 Sienna.

Would like to see what it looks like after 30/60/90 days? Cheap not always better if it won’t last or hold up outside in day to day conditions yes?

GREAT!! Love it!! Bought some!! As a side question, whatever happened to you using "Extra Tough?" I bought it when you recommended it and love it, but I don't see it in your list of products. Any reason? Thanks.

Hey Luke, do you suppose SF would be effective and safe on my weathertech mats? Thanks for your time and all the info

Can you clear vinyl wrap this after is dry? Wrap will oxidize over the years instead of the stain, which who knows how long that takes to be sun affected. ceramic coating can be long lasting, but can it, or a stain be reapplied?

I can hear Darren voice coming through you lol great dude thumbs up

I know this is the wrong video to put this on but I have been using the dog hair removal tool you recommended and it is a life saver thank you

Can trim restorer work to blacken up grills?

Video recommendation: Can silicon spray like Permatex Silicon Lubricant be used in rubber in the door jamb, hatch and under the hood to protect them from being brittle? In addition, can it serve as trim restorer? TIA! ☺️

Awesome video man! Can you do a ceramic coat over this product?

I'm hoping to do bumper trim and side trim on my car. Would 1oz be enough?

Good stuff!! On a side note I lost that watch in 1976. Where’d you find it? Hmmmmm.

I used back to black. Does that need to be removed somehow before using this

Could this also be used to treat faded exposed weather stripping?

What do you add to seal the restoration?

Would be nice if you had a follow up video lets say six months later.

In addition to my comment below, I forgot to ask... is this a good process/product for those plastic rain gutter like strips on the R & L top of the car roof? They start to get like faded spots.

Dam, that's pretty cool. So what would you put on it to "protect" that shine going forward?

What do you recommend for the black rubber around the windows that you said this product wouldn’t work for

Great video Luke. Do you recommend this product for interior plastic trim?

Just ordered this using your link. I just applied to my Challenger trim and so far it looks brand new! I sent your link to my neighbor that was impressed with the results as well.

It looks great for sure. Is it wise to then put a protectant over it?

Could this be used on faded steering wheel buttons?

Any product such as this one that would work with interior plastic black trim pieces? Thanks!

Can you go over leather seats and different ways to clean leather again? i’ve seen you use non abrasive scrub pads but you’ve never gone into depth with it

How long does this last? Should something be put on top of this afterwards as a ‘protectant’? What do you recommend for non porous surfaces like the exterior trim around windows?

Will this work on brown trim too.My chevy E quinox has brown trim.

Have you tried the Adams black trim restoration

Ordered ! Thanks for the video.

Do you have any experience with "Car Guy's Plastic Restorer"? Been thinking about picking it up on Amazon... Now I'm not sure if this may be better?

Hey, whats the name of the dye that you are using?

can this be used on interior black plastics?

good tips nice finish on trim

Is this work for door handle Ford F-150?

Can you use this on the interior trim? If not what would be a got restore product for interior black trim?

Safe around chrome, if you were to get some on it by accident I assume? Thx

I have an '11 Hyundai Tucson, very faded and porous trim. I have tried wipe new, bro, car guys trim protection and none worked. This looks like it could be a solution.

Hi good. Video is this work also. For door handle. F 150 ?

Can this use for door handle ?

i Iike these kinds of videos

Going to give it a try. Thanks. What’s the best way to turn faded interior back windshield deck black again?

what solution have you used on your eyebrows?

Purchasing from your link, thanks! Follow up? How long does this last?