The green one looks like it has some pretty good air control. 👍 The other one doesn't seem to handle All that bad either. And they do seem pretty strong pretty durable.
Brenda right now I don't think you know but I have the holyton RC car it's kind of squirrely, but I do believe when you come visit you will totally fall in love with it
I got the deerc 210e put 1/8 paddle tires on. It didn't like that, so I got the hobbyfans 80a esc and 3650 motor combo. All stock pinion and spur gears. Wow thing is crazy now. Got a holyton for all the spare parts, kids old rc.
Oh ya they go nuts! The one weak point I kept hitting on these was the axles just bend or break too easily and can’t find better ones. So just keep that in mind, maybe have a couple extras and have a blast!!
Loving your vids and learning a lot as a new rc enthusiast. Great stuff! I am starting with the Hosim X-07, but the wife bought this car..We want to upgrade this model and this helps heaps! :D Thanks!
2 yrs later i know but some great info here thanks bro 👍, you have a lot of knowledge with rc cars that is clear, i was into the hobby many yrs ago but want to get back into it again, and i like 1/10 scale or lower with a 1/12 as a maybe option, i do like hbx products and will try one or two of those out sometime soon and even the little 1/16 hyper go looks peretty solid but i dont like 14 and up scale as the driving experience becomes more unrealistic and toy like for me, does hbx make a 1/10 scale ?, im a poor pensioner from South Africa so im looking for something cheapish but good in 10nth or 8th scale, i do love the more expensive stuff but my pocket would never have it lol, it takes me three months of saving just to get something worth $150 with someone like my wife in control of the cash lmao 🤣, (hope she dont see this cuz then i be getting fkall lol 👀) peace from South Africa and thnanks for interresting content bro, i do enjoy it ✌
@@DerbyCityRC thnx for response bro ✌, yeah since this comment ive already got 6 rc cars but still no hbx, three of them are the wl toys storm and I realy love them lol, for a chill rc driver like myself they drive just like a real car, what I do is just make sure everything is working out the box then straight to the garage for a strip down and rebuild and improvements and mods wherever needed before its first drive, and when I'm done it's better than it was out the box, I do this to all my rc cars as I done many yrs back, but im verry interrested in that mjx 1:10 scale you just mentioned thank you 👌, I am planning to get a hyper go soon for a bit of ruffer bashing fun, "but nothing so bad as to destroy it ofcourse 🤣👍"
@frednel4326 no problem 😆that’s the best way to do it! Get them exactly how you want them. The 1/10 mjx is pretty sweet. Even though it needs some improvements, it’s my favorite hypergo model so far for sure.
Also, if you haven’t seen it yet, here is the video where we installed and tested them for the first time. BRUSHLESS RC CAR - UPGRADES - EPIC BASH - BIG TIRES ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PpeuyQNPa-4.html
I recently took a nose dive into the rc world and learning how to fix and upgrade. Out of all the videos out there, I gotta say your videos are the best! I appreciate all the knowledge you are sharing! One ?, do I have to change the stock servo on the 9206e when converting to brushless?
Glad the vids are helping and welcome to a great hobby! Yes you do need to swap the servo as it will not be compatible. It won’t even be able to plug in. Here is the one you need: amzn.to/49rCNyn
Mate I'm really enjoying your videos and informative content. Had to sub there so I get future notificatios of future and past vids iv missed. Also love how you make time to reply to my questions. Keep up the good work bud. Appreciated here in the UK. 🍻
So glad you’re liking them! I try to pack as much info in as I can while still making them fun! I like talking to everyone so thanks for asking questions! I’m in Kentucky in the US. Thanks so much for watching and subbing and liking!! 🤗😎😎
It’s been 2 weeks now that the RC bug bit me! After watching a whole bunch of RU-vid vids, your channel really stands out to me… For a beginner, would you recommend the Deerc 9206e or the new upgraded 200e? I definitely want to do upgrades in the future! With both models having the same platform, minus the motor and esc, which one would make upgrades easier?
Thanks! I’m happy to hear that! Well if you plan on upgrading, I would go with the cheaper 9206e. I’m about to do a review on the 210e, but it may still be a few weeks. Have you set on these two cars for sure? Have you seen my videos on the Flyhal fc610? That is one of my favorite cheap cars and I’m about to do a budget brushless conversion on it.
Thats correct. I’m not sure if the 200e comes with a separate receiver so if you were to upgrade that one, may still need to buy all the same parts (except the servo). I can say most likely buying your own brushless motor will be much more powerful that the 200e or the 210e, but I should know more once I review the 210e that’s in the mail.
I used to servo that comes with the brushless cars, like the 200e, so if you get a brushed one like the 9206e and convert it, you will need to get one of those servos, but If you get a 200e or a 210e and upgrade it, the servos those come with should be fine.
Those motors with ribs are 2847 in 3650 cans. ESC and motor have to work much harder to push heavier cars. Largest cars I'd put those systems in are 1:14 scale.
Sure thing. Here is the motor and ESC I used:amzn.to/3gOMYDh Here is the transmitter and receiver: amzn.to/34Yk29i Hope that helps! Let me know if you need anything else.
Usually I get it from Banggood but they are out of stock. I’ve also gotten one from here before. www.pxtoysrc.com/index.php/pxtoys-9300-upgrade-parts-oil-shock-1211.html
It’s a great system, but yes the stock esc on most of these cheaper vehicles has the receiver built into it. So when replacing the esc, you also need a new receiver with transmitter
Thanks man! I wonder the same thing!! Lol. Growing pretty steadily, though. Super happy you’re enjoying our videos!! I haven’t forgotten about your product links. Those are coming up. Feel free to share our channel with anyone you think may like it! 😄
So the tires are the stock tires out of the box, although in the more recent videos with that green body car, I have oversized Traxxas tires installed on it. So fun!
This is the radio/receiver I got for it. DUMBORC-X6 2.4Ghz 6 Channel RC Transmitter with Gyro Inside Receiver Low Power Alarm and Out of Control Protections Radio Controller for Remote Car/Boat/Tank Mixed Mode Remote Controller www.amazon.com/dp/B07Q112TQF/ref=cm_sw_r_cp_api_glt_fabc_MT7DMRSD36G0R1Q0MV3C
Here is the servo. Banggood currently is out of stock looks like, but ive also ordered one from pxtoysrc.com before. www.banggood.com/custlink/DvDE0jdbIz
Sure would! Exact same chassis! Not sure of the link in that video is good any more, so just in case here’s the motor and esc: amzn.to/3Pq0Owg Is that available to you?
Yes. With oversized tires and with 3s, the car basically destroys itself. Diffs, axles, lower control arms. I just filmed for a video today on it. Broke with almost every big jump. Honestly, since making this video, I’ve found a much better car to upgrade. Check this one out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GvNNjAeEn10.html
I know this video is old but I have a 9206e that I converted to brushless for my 9 year old daughter. Problem is the 3s packs I bought will not let the factory hold down clip fit. You said you used straps. Id like to know where you went through on the chassis. I see the 2 holes on the outter part but where did you put the straps on the inside of the car towards the driveshaft?
When I did this, I believe I didn’t go through anything on the inside part, however, they have another car out that’s the exact same and they run bath straps through the slots on the upper chassis brace only. Even though they don’t line up perfectly with the battery tray. Either of those should work 👍
Well here is the build for my daughter. I put a 3300kv 3660 surpass hobby motor and esc, larger tires, 2mm axle pins in drive axles, oil filled shocks, dumborc transmitter and receiver, and custom painted body. Look pretty good and she can’t wait to get it out. But the weather has been horrible. Thanks for all you do, a lot of my build, the influence came from your videos.
The stock one should last a while if you use the stock plastic spur gear. I ended up getting a Hot Racing pinion gear when I had a metal spur, but I went back to plastic. The pinion gear size is MOD 0.6, 22T. If used to be on Amazon but seems it no longer is.
PLEASE HELP ME!! I recently bought a Holyton 9205e. I am looking to upgrade the suspension parts, but I have no clue what parts will work on this car. If these companies would list dimensions on their parts I would have much more hair left on my head. Any assistance would be greatly appreciated. Thank you!!
Hey there! I have the DeeRC 9200e. Have any of yours have the pinion on the stock motor without a grubscrew? Mine doesn't, and won't come off the motor so I can take the motor plate off. Have you come across this before?
Hello! Yes I have had that issue. Seems all the newest ones don’t have the grub. I’ve just ordered a new pinion gear to solve that issue. Here is the ink to the proper gear. Then you can either order a new motor mount or carefully press or cut the old gear off so you can get the old mount off to reuse. Thanks for watching!! Hot Racing NSG22M06 22t Steel 0.6m Pinion Gear 5mm www.amazon.com/dp/B014YX65IE/ref=cm_sw_r_cp_api_glt_fabc_PZT38BGV8RETBXJPK6N3
@DerbyCityRc I had a question, I have a holyton 9200 E series car like the one in your left hand at the beginning of the video, in need to replace because the one of the steering dogbones in the rear because the spindle for the tire is slightly bent, and it seems that the bearing is causing the arm to be stuck in the hub, how do you get that out and have you been able to find the correct size bearing to put into a new hub? Also what banded tires have you found fit the car, I keep buying 1:10 scale tires for it and they are too big, I am afraid I will be burning up a pinion gear.
Sometimes those axle stubs are tough to get out from the bearings and it just takes force or gentle prying. Sometimes when they bend, they “friction fit” to the bearing. I don’t remember off hand what size the bearings are. I have it in one of my other Holyton videos from a while ago but I can’t remember which one lol. This isn’t a true 1/10 scale car. It’s sized more like a 1/12 scale. So if you go for tires more for a 1/12 scale, that should help!
Hi there need to find a charger not to expensive for the XT60 battery or can you get an adapter and charge it with the dean connector charger thank you
I’m actually not very fluent on chargers . I use basic USB chargers for all my batteries except an EC5 charger for my Kraton batteries. Check out Van City RC’s channel. He has reviewed a few chargers on his channel recently and they look like they have xt60 plugs!👍 Thanks for watching!
Unfortunately you can’t really change gear sizes on this car. It’s a fixed motor mount. I just use the stock spur with an upgraded 22T pinion, which is the stock size.
Here is the metal spur I ordered. It worked well at first, but it takes some strange maneuvering to get the gear mesh to be correct (even though the mount is not adjustable). So I went back to plastic and have not had an issue with them yet. www.haiboxingtoys.com/pxtoys-9202-parts/2754-pxtoys-9202-upgrade-parts-metal-reduction-gear.html
That’s interesting. You should watch some of my other videos on that car. I blast the crap out of it and have yet to strip a spur gear. Actually the metal spur gear stripped out my pinion gear, so I had to get a stronger pinion also, but like I said, I have since gone back to plastic. But I was able to get the metal one to work after a bit of trial and error. Mesh was too tight, but loosening and tightening the gear cover a few times seemed to help 👍👍
Sometimes I did. Some of the stock motors have a set screw for the pinion, and some have the pinion pressed on. The pressed ones are a bit tougher to remove. I believe I just ordered a new one for the motor I had that was pressed. All the new pinions I ordered came with set screws
@@DerbyCityRC could you tell me where you got the desert journey RC car body right now I have the holyton, and I'm finding out from you that you can interchange the bodies
@@sandiwiezycki2224 I’m about to order another one. It was kind of hard to find. Let me look for it and I’ll give you a link. Is the desert journey the only body you want?
@@DerbyCityRC why thank you I appreciate you doing that 😎 I forgot to mention your videos are awesome like I said I have a holyton myself and I just love it. By the way do you have any suggestions because the holyton car is a little squirrely do you have any suggestions how to make it actually go straight I do think it has a a mind of its own sometimes.
