Bradley, Awesome! Thank you so much. Since the video was published, I've shortened the shute to about 4”. Also, I remove the shute leaving the filter attached to the shute to rinse out the scales in the lake water. The shute slides on and off a lot easier than the filter.
@@mtnguyen1696 , Thank you. I no longer get my oxygen tank refilled. It became too much of a hassle to find suppliers to refill the tank. I now exchange my 20 cubic foot empty tank for a full tank. The steel tanks are about 10 pounds heavier than the aluminum. I do this at welding supply shops. Currently, I exchange my empty tank at Gas and Supply for under $10. The shop exchanged my aluminum tank for a steel tank. Let me know if this helps you.
@@mtnguyen1696 , It's tough to keep Blueback Herring and Trout alive in a 30 quart bait tank, especially during hot weather. Oxygen along with ice bags work well for me. But, I've also had some luck using the nano air stone along with the airlift pump and Ziploc bags filled with frozen water. Also, the oxygen helps keep the bait very active.
The Bubbler Pump is pumping compressed air to operate the air lift pump water circulator. I'm supplementing the system with 99.2% pure oxygen through a separate line into the Nano Air Stone.
Sorry brother I seen the hoop wrapped cylinder that you have in the back the seat there and it looks like one that we made as I am a cylinder manufacturer and know that an oxygen cylinder must be green and be tagged with a flammable sticker. But the one in your video is an old air bottle. It’s probably out dated meaning over 15 years old. And it’s a Luxfer?
@@gilbertogonzalez9494 No problem. Here is the link to the oxygen tank as listed in the Description: gascylindersource.com/shop/oxygen-cylinders/20-cu-ft-steel-oxygen-cylinder
