Best DIY Sealed Subwoofer! 18" Dayton Ultimax Flat Pack Build (New tutorial and how to!)

Подписаться 110 тыс.

Просмотров 246 тыс.

50% 1

Best DIY Sealed Subwoofer! 18" Dayton Ultimax Parts Express UM18-22 Denovo Flat Pack Build
.
***Check These Deals
▶️Samsung S24 Deals : jiles.link/5uRkK8
▶️NewEgg Laptop Deals: jiles.link/eM19vY
▶️Google Pixel Deals at Best Buy: jiles.link/BmnKLm
▶️Amazon Deals: amzn.to/3DzUY6m
#SamsungPartner
#AmazonPartner
#BestBuy Partner
#NewEggPartner
#affiliate
*** LIMITED TIME:
*** Thanks For Checking!
.
.
18" Dayton UM18-22 Sealed DIY Kit Build
---------------------------------------------------
In this video we will walk through a DIY Subwoofer build! We are using the 18" Parts Express Ultimax UM18-22 Subwoofer and the Parts Express Flat Pack enclosure / box.
The front and back are painted and the sides are laminate.
Speakon connectors were used and power is from a Behringer iNuke nu6000 amplifier.
PRODUCT LINKS:
Assembly:
▶️GSG MartySub V2.1 Flat Packs: shop.gsgad.com/collections/ro...
▶️Stereo Integrity SQL 15: stereointegrity.com/product/s...
▶️Sili-Brush - Silicone Glue Brush (1" Tip): amzn.to/3RdbwaF
▶️Tripp Lite 8 Outlet (5 Energy Saving) Surge Protector Power Strip: amzn.to/40aBRKv
▶️Titebond 1414 16 Oz Titebond III Ultimate Wood Glue (1.5X per sub): amzn.to/3jdN6RA
▶️1.5 in. x 1/2 in. Fluted Dowel Pins: amzn.to/3Hj59xP
▶️Bates- Paint Scraper: amzn.to/3WLfFDS
▶️GreatNeck 8 Oz. Rubber Mallet: amzn.to/3WLxiDp
▶️Hurricane 4 Piece Wood Chisel Set: amzn.to/3wI6HN3
▶️KATA 4-PACK Folding Utility Knife: amzn.to/3DsQOOb
▶️Rust-Oleum Spray Paint, 12 oz, Ultra Matte Black: amzn.to/3j8jeGx
▶️TEKTON 36 Inch Ratchet Bar Clamp: amzn.to/3WIi1TL
▶️TEKTON 24 Inch Ratchet Bar Clamp: amzn.to/3Y43XFk
▶️Duratex: amzn.to/3P2VpwL
▶️Wagner Paint Gun: amzn.to/3E3agkv
▶️Orbital Sander: amzn.to/3P4dVF0
▶️Sand Paper: amzn.to/3E3e59n
▶️Dry Dex: amzn.to/3OZgAzL
▶️Small Screws: amzn.to/3qEQNDI
▶️Cap Head Screws: amzn.to/45AX1mY
▶️Gasket Tape: amzn.to/3OZgLep
▶️Plastic Throw: amzn.to/3qAAUhD
▶️Heat Shrink: amzn.to/45g1r2Q
▶️Heat Gun: amzn.to/45hd9dl
▶️Speakon Port: amzn.to/3QLNzcj
▶️12g Wire: amzn.to/3YLewi3
▶️Crimper: amzn.to/44hI6wV
▶️MiniDsp 2x4HD: amzn.to/45b239Q
▶️UMIC 2 Microphone: amzn.to/3E1puqc
---------------------------------------------------
Interact with us directly through RU-vid Membership:
www.youtube.com/@jilesmccoy/join
---------------------------------------------------
.
▶️Join our Mailing list:
2aa186b7.sibforms.com/serve/M...
*
Feature Your Theater/PC/HiFi System on RU-vid or Instagram: Jiles@jiles.org
FIND DEALS:
---------------------------------------------------
Visit www.hometheaterfanatics.com
Join our Deals Channel:
SUPPORT US
---------------------------------------------------
Join as a member on RU-vid: www.youtube.com/@jilesmccoy/join
Click on the "Thanks" icon in any video
PATREON: / jilesmccoy
FOLLOW US
---------------------------------------------------
LINKTREE: linktr.ee/jilesmccoy
RU-vid Subscribe: www.youtube.com/@jilesmccoy/v...
BUSINESS INQUIRIES: jiles@jilesmccoy.com
PODCAST: jilesmccoy.buzzsprout.com/
DISCORD: / discord
. .
***Affiliate Information:
Purchases made through some store links (Samsung, Best Buy, Amazon, and others) may provide compensation to Home Theater Fanatics LLC. Thanks for using my affliliate links to support the channel. There is no additional cost to you!
***Thanks Again!
.

Наука

Опубликовано:

13 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 514

@wolfeswoodwork7952 5 лет назад

I’m a professional woodworker, and an electronics hobbyist. I thought it important to clarify some things for the viewers and after reading some really bizarre comment based advice I really see the need now. First, you are not going to get good results from a roller, period. Liquid paint should be sprayed using an hvlp or even a cheap harbor freight or rockler, earlex style, finish sprayer and the results will be even and glass smooth, especially if you clear coat with lacquer or eurethane. Now when laminating you apply the sides first so the raw top edge is covered by the top piece. Just use your table saw and a zero clearance plate or throw down thin sacrificial board and elevate blade up through it. Also, when using a router you move from left to right or the blade is spinning in wrong direction to cut with the sharp surface and you will not only fight it but cause burning. Any router will have power to cut laminate but a small laminate router gives most control. Sounds like you were using the wrong bit. A proper flush trim laminate bit will have a bottom bearing that runs on reference surface and if you keep it clean it won’t mare the juxtaposed laminate and you can go overkill and use lamalube if you are extra concerned. The blade cuts flush so I’m not sure what you meant by recommending that people don’t cut full depth. Also, don’t use contact cement. Use heat activated spray glue like 3M heavy duty 90 spray glue-it comes mes in rattle can and is sold everywhere . The sun exposure will only strengthen the bond. Use a a heat gun and roll it from the center out in each direction. If the laminate ever bubbles or starts to delam in the future all you have to do is reheat it and apply pressure. Once laminated you should blend and smooth all the edges with a fine mill bastard file. Then spray citrus adhesive remover to clean off any overspray and polish to nice clean shine. Follow these steps and a diy’er can produce better results than any production factory speaker. I’m glad you took on the project of course because one surely learns the most by doing. If it weren’t for my millions of fabricating mistakes, I would know very little. However, if I can prevent some frustration in other’s projects and help guide others to higher quality outcomes then I am happy to do so. Note: ultimately your project turned out well. I hope my objective corrections/instruction doesn’t come across as negative energy as I love speaker building and the speaker building community. I was simply trying to be concise and efficient with my thoughts. Well done, sir, well done!

@JilesMcCoy 5 лет назад

Those are great tips! I hope everyone checks them out and uses them in the next builds!

@joshua43214 5 лет назад

As another professional furniture maker, I have to disagree about painting. Extremely good finishes can be had with a roller (or even a brush). The problem here is the guy did about everything wrong in terms of surface prep and application. Painting furniture is a skill unto it's own, and most of us do it poorly. I would add, do not use 400grit paper, it is far too fine and does nothing to improve the final finish. 400 grit is what you use before finer grits on top coats (think automotive paints). I usually use 220 between coats (use a soft sanding block). It is very important to remove all the dust from the MDF before sealing and painting. Not doing so will result in the finish not drying well, and not adhering properly. Compressed air is best followed by a damp wipe. Tack clothes work, but can leave a residue. Follow after a tack cloth with a solvent that evaporates with no residue such and acetone (use the heavy duty paper towels that come in a box or big roll). There are many forums and channels made by very good woodworkers who can give you support. They would have advised to use less glue (you used 2x what you needed, and only applied to one side), use more clamps (the clamping was woefully inadequate, big panels need lots and lots of clamps, and this box will be under tons of pressure), wiping off the glue line makes it harder to clean up (the right amount of glue will form beads that scrape off easily before they fully dry), you should *never* climb cut with a router (ever). Wolfe's Woodwork gave lots of really good advice on technique. There are plenty of people like him that would have made your life much easier. Lastly, do not take the word of anyone in the DIY audio community about woodworking. They are in my experience the worst woodworkers on the planet (unless they also happen to be a woodworker). Places like that are where bad advice like using Tightbond mixed with water as a sealer come from. You can thin white glue with water and use it as a sealer, but you can not do it with any of the yellow glues.

@mrt-rexbitemark3986 4 года назад

Lol

@JilesMcCoy 3 года назад

joshua43214 “The Guy”. Ha! :)

@bobblahbinski7061 3 года назад

FWIW, a thin layer of body filler not only seals but can also be sanded really even. Once you're happy with that a couple coats of primer (maybe 3 to be sure & wet sand it (remember it's sealed now). Then apply your favorite color. Wet sand that. Then clear, 3 or 4. Wet sand with extremely fine paper. Wax & buff. Only issue with this is you can't be in a hurry. And it might be a little costly.

@1980JPA 5 лет назад

Great vid. Thx so much for showing us your journey. One tip. Loose filling can get into the motor of your speaker. There are many ways to avoid this from not using loose filling to making sure it's dense and stuck together well. Great job 👍🏾

@mattbishop1093 4 года назад

I bought two of these and built them. The sound quality is authoritative and very pleasant. They could never be matched by anything smaller. They have almost infinite capacity for the deepest bass. A very natural sound quality and flat frequency response. I really recommend these.

@JilesMcCoy 4 года назад

Awesome! Its a fun build!

@imip.1252 2 месяца назад

Hey there, do you have any measurements of those 2 sealed Daytons?

@tryhardnoob1140 5 лет назад

I really enjoyed hearing your thoughts and how you tackled each issue during the build... Used to seeing "experts" that just magically slap it together with some fancy video edits. Nice work.

@endall39 5 лет назад

Thanks for the video. I agree that 400 grit is the way to go for between coat sanding. As far as prepping the end cuts, I find "sanding sealer" to be simpler, more sand-able, and quicker drying than the glue/water mix. It's a ready-made wood working product that does a nice job.

@nicholascremato 5 лет назад

I love the look of this driver!!!!

@WazzyCabbage 5 лет назад

When gluing a floating surface together ,try using some normal table salt to give surfaces some grip properties !!!! Top tip from another wood working video !!!! Plus I agree with other poster. Use tack cloths to remove sanding dust between coats. Done many years as a lacquer ,priming , sealant spray painter for a major company and that's all are sanding team ever used !! Top results !! Oh and keep a Stanley blade and safety pin nearby while spraying ,painting , as a stray particle of sorts will decide to drop on at some point

@mavriksc 4 года назад

The stock flop combo 🔥🔥🔥

@JilesMcCoy 4 года назад

SO HOOOTTTT

@davidjeanpierre2358 5 лет назад

Congrats on the build, and thanks for a very informative video 👏

@JilesMcCoy 5 лет назад

Thanks!

@russ6366 5 лет назад

Great job!! I appreciate your humility in admitting your mistakes, trial & error, etc. I’m not the handiest, but someday I’d love to build one for my media room. I’m impressed how great it looks. The laminate is definitely a great touch. 💪👏🔥👍

@JilesMcCoy 5 лет назад

Thanks Russ!!

@ProperMethodz 5 лет назад

use a high quality file on the edges. It'll give it a nice bevel.

@robsmith1835 4 года назад

I'm happy to see you include your son. Good Job

@JilesMcCoy 4 года назад

Both my boys are part of everything. Although they aren't always on camera.

@endall39 5 лет назад

I really like your laminate choice. I have a few suggestions for how to avoid a couple of issues you brought up or I observed. One, put masking tape on the finished surface to protect it from potential damage from the flush-trim router bit. Second, use masking take to keep the contact adhesive off of areas you don't want to cover (front baffle) during application. I have found the best way to work the corners of the overlapping laminate use a fine file on a 45 degree angle. You gently guide the file down the edge from end to end. You get a sharp and uniform bevel. If the edge shows a bit of undesired color you can mask off and use a detail paint applicator to dress up the edge, or possibly even a permanent marker.

@Badassvidsz 5 лет назад

Excellent work .

@markstill8258 4 года назад

Wow found your video and realized I am using the same laminate as you. Starting the build this week.

@JilesMcCoy 4 года назад

I’d love to see photos!

@mikeables 5 лет назад

I started my first build. A three way speaker with 15 inch woofers, 7 inch mids and tweeters. I am feeling so proud of myself after figuring out each step of the design. I never used power tools in my life! Going slow and enjoying the learning process as much as looking at my progress each weekend. I liked seeing the inner bracing they used on that design. I also liked yours and others comments about clamps. Good job with the build and the video!

@JilesMcCoy 5 лет назад

I would you to see your build come along! Do you have a thread started somewhere?

@mikeables 5 лет назад

@@JilesMcCoy No thread started. One hobby is enough at the moment. I got my box panels all cut today. 3/4 " mdf. I got a cheap $120 router and a $50 circle jig thingy. So the next step will be to practice cutting a few circles with the two router bits to get that sunk down flush mount look. Each speaker took an entire sheet of mdf. That stuff was very hard to lift off the top of my suv by myself. Cheers for now!

@JilesMcCoy 5 лет назад

@@mikeables I would LOVE to see photos as things start to come together!

@juststuff5216 5 лет назад

Really coll video. Really love Dayton speakers (I used them in my home audio set up), but for me living in there UK there's too many question marks over build quality of the subs. I've read too many bad review on PE

@BirdArvid 4 года назад

Awesome! I would suggest raising it off the floor with some sort of feet; it cleans the sound up.

@JilesMcCoy 4 года назад

Thanks for the tip!

@JoshM7 5 лет назад

Wow, 2nd recent Ultimax 18 build, I'm excited. Love the finish, came out great! I'll have to watch it later so I can sit and watch the whole thing without skipping. Are you planning on getting a second with that Inuke6000? Also a fair warning, you'll probably have an impedance spike around 30hz (I think it was peaking in software at 32) that brings the impedance up to around 20Ohms, and the Inuke wont give out enough power (1,000 watts) around 32hz to reach its full potential. I wish I could measure the impedance better, but I don't have the funds to do so atm, but I have the Inuke3KDSP and the most I saw on my Full Marty before I had to back off was around/a bit more than 200 watts @28hz and on my sub it's around 24Ohms. (16hz I got 800 watts and was scared turning it up the entire time, so much output, I tapped out early lol) Used a watt meter and Multimeter to see the A/C voltage from the amp.

@timothywalsh1001 2 года назад

My high-school woodshop project was speakers, in 1981. They were MONSTERS. The 18" subs required 20cuft. Currently my mains are Infinity SM155 and love how efficient they are.

@JilesMcCoy 2 года назад

Awesome!

@78schoolboy 5 лет назад

I should of said this when I first commented for all of the lack in building knowledge you had the final product come out exceptionally well good job it's just the little things that make it easier and hep make that finish and fit perfect

@JilesMcCoy 5 лет назад

Thanks - I hope that others can learn from my mistakes!!!! I make plenty.

@essentialone1 5 лет назад

Just shows it isn't as simple as you think putting a box together and making it nice and tidy & square, so many steps and things to take into account, I really like that you explained your process as you went along, one thing I was expecting was a Bass port but didn't see one. I made a box myself for my 8" Dayton Audio Designer series Subwoofer and when it came to painting it I used normal Gloss paint at first and it didn't take so well it counter acted all over I was gutted so I had to get it all off and start again. In the end it turned out ok. Next time I will use laminate. Good job my man looks amazing. Now I'm replacing my 8" Designer series with the 8" Ultimax, cant wait.

@JilesMcCoy 5 лет назад

Thanks! I am in the process of building a ported version now for comparison!

@Gsxrtrix 5 лет назад

Could I bother you to come to my house and help organize? 😂 Good work.

@amsb4dafunk406 5 лет назад

Knockdowns are as simple as it gets. Assemble everything in one shot, to get proper alignment. 18 clamps, and a brad nailer. EasyPeasy. I have over 50 bar clamps in various sizes, and yes I still manage to find myself not having enough.

@georgeclarke8137 4 года назад

Nice job! Laminate looks good.

@JilesMcCoy 4 года назад

Donna Clarke Thanks!

@jasonjackson3114 4 года назад

Yep. Good subwoofer. The Uttimax 15 is a fine performer in a sealed enclosure too.

@JilesMcCoy 4 года назад

Very cool. I need some smaller units for the front of my room.

@kdolanjr 3 года назад

D&D books and good audio, I'm here for that.

@JilesMcCoy 3 года назад

Me too!

@kohnfutner9637 4 года назад

Awesome video my man. Thanks a lot for your time.

@JilesMcCoy 4 года назад

Glad to do it!

@nelsv69 2 года назад

Little helper deserved a mentioned I thought ..thanks for sharing 👍🏾

@JilesMcCoy 2 года назад

No problem 👍

@78schoolboy 5 лет назад

And a tack cloth is what's used to wipe the project in between to remove all dust

@briansimmons5363 5 лет назад

Nice build!

@hi-fihaven2257 5 лет назад

Great work on the video, awesome project!

@JilesMcCoy 5 лет назад

Thanks!

@changedahanddlessss 5 лет назад

good work dude.. A+ for effort lols.. im new to woodwork as well, learning from the tubes as well... lol got the kiddo helping out too XD

@LifeofBliss 5 лет назад

Really awesome build man. Just commenting as I go along... As far as not perfectly aligned edges, if you have a router, a flush trim bit is amazing for making the transitions smooth. A $50 electric osculating sander is well worth the time/money spent my friend 😉. If I am ever using new products on a material, I always do a test panel before doing my main project. Saves material and a lot of time if it doesn't turn out right! Spraying will always give a smoother finish, and that 2000 grit is really only good for sanding a clear coat before polishing. You were good with the 400 as you found out. Heck yea, that turned out awesome! That gloss laminate looks cool with the flat black front! Never done any laminate or veneer myself... Those Ultimax's are great woofers. I've had the 15 inch version for almost 5 years now. Just finally got an upgrade I need to start building a box for. Wasn't trying to be critical btw, just maybe throwing out some helpful hints I wish I would have known years ago. Glad to see another DIY guy making videos on this stuff. Sub'd and looking forward to more! You may like some of the stuff I have going on my channel as well. Just finished my DIY Sound Group 1299 build video tonight... See you soon on the forums... Kyle, aka Blister64

@JilesMcCoy 5 лет назад

I am jealous of the 1299s! I would love to build a set of those!!!! Looking forward to that video!

@JilesMcCoy 5 лет назад

Dude, nice shop! That's serious!

@LifeofBliss 5 лет назад

Thanks man ☺ I've been able to accumulate some good tools over time. Luckily the wife is pretty cool about me taking over the garage every now and then!

@sandstoney 4 года назад

I think you did a great job and your video was the best, totally very well explained

@JilesMcCoy 4 года назад

Thanks!

@dudndadn12212 4 года назад

Love the Ultimax, thinking about adding a 12" to my car.

@nicholascremato 5 лет назад

On all my subs I use T-nuts inside the box so I am bolting the driver into the box. I had screws into MDF and plywood fail when the driver played at high volume.

@johnjacobs3321 4 года назад

T nuts are the best by far for mounting woofers.

@MeatPoPsiclez 4 года назад

I did this in the last enclosure I built, wasn't comfortable hanging heavy 18" drivers running high power off wood screws into a small lip of mdf.

@sethh8892 4 года назад

If your screws were failing at high volume that means that you were buying really shity cheap screws. I currently have a 15 inverted Mount hanging off the side of my box with simple drywall screws. 2800w of perfectly fine!

@sethh8892 4 года назад

@@johnjacobs3321 subjective

@sethh8892 4 года назад

@@MeatPoPsiclez if you're using heavy subwoofers you're not supposed to have a thin lip of MDF. You realize you can use multiple layers on your front baffle? It doesn't have to be a single ply

@ronaldcaraway8184 5 лет назад

I want to hear it with the whole system running.

@Test-Pilot1194 5 лет назад

I’ve thought about a d.i.y sub build for a long time. This video has just convinced me too follow up and maybe attempt my own now. Great build. To finish your build, may I suggest the sound path isolation system from svs. Looks great man, can’t wait for a demo👍🏻👍🏻

@Test-Pilot1194 5 лет назад

What amp are you using to power it, ?how much power does the Dayton driver need?

@JilesMcCoy 5 лет назад

@@Test-Pilot1194 I am using an iNuke 6000. The sub seems to handle the power from the amp without issue.

@Test-Pilot1194 5 лет назад

JDM World excellent. I contacted the company in the US that dispatched them, and they said I would be liable for import and local delivery fees on top of the actual purchase price, this end. So I scrapped the idea. Il search for someone more local that do huge flat packs incl drivers, However long that takes😂😂.

@emiliomaraganas5042 5 лет назад

I love your build..

@nkojima 5 лет назад

wow good job man

@JilesMcCoy 5 лет назад

The low notes at the end are approx. 17hz.

@balacr1 5 лет назад

JDM World what audio are you playing at the end?

@smprather 4 года назад

Also, I learned from my first build that I could not get the driver out after it had been in there for a while. It fused with the paint it went up against. And I left no gap in the counter sink. The guy I sold to only wanted the driver, but he had to take the whole giant cab because we couldn't get it out. So on my 2cd build, I left enough gap in the counter-sink to be able to get a paint can opener pry tool in there. Sure enough, I blew one of my 18's when my MiniDSP HPF was accidentally disabled. I had no problem getting it out and replacing it. And yes, I did have to pry on it some to get it out. That's probably the best thing about the extra gasket you added - ability to remove it later.

@JilesMcCoy 4 года назад

Thanks for the tips!!!

@ronbonnell1775 2 года назад

I don't understand. The counter sink is already in the prebuilt kit, correct? How did you then adjust the countersink to leave a gap around the edge? Or are you talking about leaving a gap between the driver and the cabinet? If so how did you do that? With the gasket as the op did?

@smprather 2 года назад

@Ron Bonnell I’m talking about a cabinet that I built.

@rickc2222 4 года назад

Nice! I plan to do a mini version similar sealed box with a 12". Its just for my little office/gaming setup to compliment my pair of Overnight Sensation bookshelf speakers (which are f-ing amazing for their size!). it will replace 2 cheap junk 8" ported units so i'm hoping for clean linear bass when i'm done...

@JilesMcCoy 4 года назад

I'd love to see a photo when done.

@westonsmith7858 4 года назад

Great video. Love the details

@JilesMcCoy 4 года назад

Thanks!

@bananaaaaaah4285 5 лет назад

Looks nice for your first build!

@JilesMcCoy 5 лет назад

Thanks!

@maincharacter2677 5 лет назад

Banana_Boy _Bob it looks really good for a build in general.

@aspjake123 Год назад

I used T nuts to mount the speaker. Very easy on the wood and no problems if you have to remove the speaker numerous times. Awesome video!

@JilesMcCoy Год назад

Thanks for sharing

@kaedeschulz5422 5 лет назад

Very nice! Get's me even mor excited to finish my 2way speaker's!

@JilesMcCoy 5 лет назад

Do it!!!!

@kaedeschulz5422 5 лет назад

@@JilesMcCoy Of course!

@Notjay95 6 месяцев назад

Pro tip for clamping a glue up: sprinkle some table salt on the glue. This gives the surfaces enough grit to stop it from shifting when clamping

@JilesMcCoy 6 месяцев назад

Thanks!

@stevenng4638 4 года назад

Nice built!!! 👍🏽👍🏽👍🏽

@JilesMcCoy 4 года назад

Thank you!

@dAdviser 4 года назад

Great job. One-thing only I wouldn't use this type of wet glue with MDF wood.

@JilesMcCoy 4 года назад

I think I might be coming over to your side. I like it a little runny but the titebond 3 might be too runny.

@michaelprexler9351 4 года назад

Schon ein heftiges Teil ! werde mir aus so einen bestellen,Gehäuse hab ich schon ein Gutes mit etwas mehr Volumen aber auch Teilweise bis zu 44 mm Wandstärke.Sollte dann auch heftig rocken.Die SPA 1000 habe ich schon länger,hat mir schon einige 18 Zöller verbraten !

@Gcrilla 4 года назад

You did a great job, especially figuring it out as you went. Next one will be even better.

@JilesMcCoy 4 года назад

Thanks!

@Gcrilla 4 года назад

@@JilesMcCoy feel like alot of people were overly critical, when the project turned out great, also they were critiquing to their own personal even though it's your build. Anyway, I'm really interested in trying this technique I read about giving wood a deep almost candy paint job, through a bunch on painting/ wet sanding/ re spraying clear coats.

@JilesMcCoy 4 года назад

@@Gcrilla I always look for the best in each comment. I am ok with criticism too. I am building a huge 21" monster right now!

@Gcrilla 4 года назад

@@JilesMcCoy I'm super jealous man, honestly. Im still in the planning and research phase, which speaker is the 21"?

@JilesMcCoy 4 года назад

@@Gcrilla This one in the GSG dev kit: www.eminence.com/speakers/speaker-detail/?model=NSW6021_6

@Jesvjdm 4 года назад

Looks real good... You look like you know what your doing!.... Haaaaa... Great job.

@JilesMcCoy 4 года назад

Thanks!

@user-fq5gb4ob9t 5 лет назад

Good job)

@ZeroCool-vn9bd 3 года назад

I can really recommend the semi tedious step when gluing to use additional pieces of wood between the clamps to spread the clamping force. It's also really important to use something, (maybe a piece of lexan or plastic with a smooth non stick surface in between.

@JilesMcCoy 3 года назад

Thanks for the tip!

@creativechanel3238 5 лет назад

Tes of sonido ‼️🔥🔊🔥‼️. ⭐️⭐️⭐️⭐️

@kenzilla8096 4 года назад

Hi. I liked the final look. What laminate did you use? Can you put the link? Tnx

@ulflarsson9693 4 года назад

What is the amp watt on it and have u meausered how low it goes in the frequence then?.

@JilesMcCoy 4 года назад

If you browse through my videos there is one where I do the measurements!

@EduHSnoW 5 лет назад

soooo nice

@4kforlife386 Год назад

@Jiles McCoy thank looks incredible! Great job 👏

@JilesMcCoy Год назад

Thank you!!

@AvidDibolo 4 года назад

Amazing work and very impressive sample in the end of the video. It’s kind of mesmerising. Can u tell me were I find these sound samples. Best regards.

@JilesMcCoy 4 года назад

Should find them on RU-vid!

@ROBERTJH1979 4 года назад

I give you credit you did a pretty good job

@JilesMcCoy 4 года назад

Thanks!

@MasterDJRenn 4 года назад

What amp are you using to drive it? Looks like it could take quite a bit more.

@JilesMcCoy 4 года назад

1 NYC DJ Behringer NU6000. I have this exact box up for sale now too :)

@jasonsullivan8001 5 лет назад

Great video. I would of like to see how you set up the amp.

@JilesMcCoy 5 лет назад

Videos are coming to cover all of that!

@JilesMcCoy 5 лет назад

Is this what you need? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DAFDu_0XkEo.html

@CHIBA280CRV 5 лет назад

Fantastic job thanks, how does it compare price wise vs a already purpose built subwoofer comparable to your kit ? Can you give a price comparison of already built unit with the same specs as yours ? Thanks again.

@JilesMcCoy 5 лет назад

Hi - I got the box + woofer from Parts Express for 399. I bought the amp I use used for 150 bucks. Its an older iNuke 6000. A miniDSP can be had for 100 bucks. Add in 100 bucks for cables and paint and screws.... so you are at 750 bucks. You can get a SVS PB 2000 for about this price. I would absolutely go the DIY route. If you start looking at Marty ported boxes (which are marginally more expensive... or more time maybe) you will get even more return on investment. I am working on a video about that path now.

@thethoughtmaster 5 лет назад

You need a router to smooth the edges.... Later, that is some nice shiny laminate, great work :-)

@thethoughtmaster 5 лет назад

@@nono-oy3co Yes Yes :-) He has a router so I am sure he figured it out. Are working on anything? Share :-)

@shijilalck9606 3 года назад

Good job

@JilesMcCoy 3 года назад

Thanks

@PartsExpressOfficial 5 лет назад

Cool Video!

@JilesMcCoy 5 лет назад

I would love for you guys to link to it from your website!!!! If you would like me to feature more of your products let me know!

@PartsExpressOfficial 5 лет назад

@@JilesMcCoy If you leave a review on a product you can drop a youtube link in that shows up as an embedded video on that products page.

@riveralley 5 лет назад

@@PartsExpressOfficial Can I get a free subwoofer one day?

@78schoolboy 5 лет назад

Your roller leaves the texture brother zinzer is good but oil base kilz and laquor is oil base as well takes 24 hrs usually between coats

@user-ok8so4xz9z 3 года назад

Thank you very much for sharing .i love you videos and bright comments . about this sealed unit , i have tried to loom for its measurements and haven't found any .can you please direct me to the relevant link ? do you apply and HPF to the diver via MINIDSP ? any PEQ ? i am not referring to in room tuning ,i wonder about the basic design prior to in room calibration . many thanks Dan

@JilesMcCoy 3 года назад

You can find the details on the parts express website. I don’t use a HPF on sealed boxes. PEQ is really room dependent... but I always end up using some to pull down peaks.

@user-ok8so4xz9z 3 года назад

@@JilesMcCoy Thank you for your quick response. what I meant : do you have the measurements of the final results of your sealed sub. I was trying to look for it at your channel, but did not locate it.many thanks

@anjeel08 3 года назад

Nice build. Thanks for sharing. Excuse my knowledge on the subject, since I did not see you put a Amplifier plate on this, would you not need to make this as active subwoofer considering the size. From what I see you build a passive unit. For 18" isn't that recommended?

@JilesMcCoy 2 года назад

You can go either way. Most folks will use an external amplifier that is easier to change or repair if a change is needed.

@justins.1283 4 года назад

I used quilt batting from fabric and craft stores for stuffing since it's in sheets that makes it easier to secure to keep it from shifting

@JilesMcCoy 4 года назад

Thanks for the tip. That is a great cost saver!

@justins.1283 4 года назад

@@JilesMcCoy yes it comes in different thicknesses and widths plus it doesn't itch or produce dust like fiberglass

@chuyvelazquez9970 5 лет назад

Super.

@hammerT2997 4 года назад

That's a nice laminate choice, we use that Madagascar quite often at work, ebony ribbonwood is an awesome color too. Next time get a 7° laminate bit and set it to where you leave extra and then file the rest clean and smooth, razor knife doesn't do too well cutting that formica backing

@JilesMcCoy 4 года назад

This is excellent advice! Where were you before? I will use this next time for sure.

@brad3d 5 лет назад

Very nice video, and it has nudged me more towards buying a pair of these.... :) You talked about how the box didn't line perfectly up. Do you think there was something you could have done better, or was it not perfect from the manufacture, or was it not worth worrying about?

@JilesMcCoy 5 лет назад

It was all me. The cut of the boards was spot on. When you ratchet down the clamps things shift around a little and I needed to spend more time checking alignment. I'll know better for next time. With some filler and a circular sander the edges should completely disappear.

@EveryDayJay415 2 года назад

Do you have a link to the laminate sheet you used? I love the look of it and I’m about to built a pair of these.

@JilesMcCoy 2 года назад

It’s Madagascar I believe.

@DuraMaxDieHard101 3 года назад

Beautiful sub box!! Where did you get the laminate and what are you powering it with?

@JilesMcCoy 3 года назад

The laminate is from Wilson Art, Madagascar. I think I have a link below for it. Power came from lots of amps: crown, behringer, and most recently a sinbosen fp10000q.

@famousmidnight 5 лет назад

I'd definitely recommend using a nail gun or staple gun when building a box. Glue is great but both is far better. Looks great though

@MrAtrandom 5 лет назад

Wood glue is far stronger than brads or staples and adding them will add absolutely nothing to the integrity of the enclosure. I've built enclosure in cars that do 150+ dB and yet I've never had an enclosure joint fail using only titebond II and clamps.

@famousmidnight 5 лет назад

@@MrAtrandom Like I said the first time both is far better, and I never said not to use glue?? I've been building boxes as a side gig for over 10 years, I've never had to use clamps and I've never had a box fail. Clamps aren't always possible on custom boxes

@MrAtrandom 5 лет назад

Brad nails and staples should only be used to secure the panel before getting clamps or screws in it. They are not a proper clamping agent. If you're just slapping some glue on your butt joints and popping a few brads in, you're definitely not building your enclosures correctly. I don't give two shits if you've never had a failure, you're still half assing your work. If you're building a speaker box inside of a vehicle, you should be kregging panels together with glue. If you're enclosure is too long for your clamps, design the panel layout different or buy some large pipe clamps. You should NEVER just be using brad nails and glue without a clamping agent.

@famousmidnight 5 лет назад

@@MrAtrandomYea man, I just slap em together. I usually use oriented strand board, 3/4 inch finish nails a dab of glue at the corners. shit bumps

@MrAtrandom 5 лет назад

@@famousmidnight Be as sarcastic as you want. You're not building enclosures properly. I guarantee that you have gaps between panels. Sure glue will fill those gaps so you may have minimal air leaks but the joint is no where near as strong as it should be. I feel bad for anybody who has paid you to build them an enclosure.

@fubartotale3389 3 года назад

I always apply a coat of glue to the edge grain, let it absorb, and apply at least one more coat. MDF absorbs glue like a sponge. Also, decent airless sprayers are cheap now, makes getting a smooth finish easy.

@JilesMcCoy 3 года назад

Thanks for the tips!

@nikolailanier1242 5 лет назад

Ha!....that laminate looks familiar...🤣 Good job man!

@JilesMcCoy 5 лет назад

Its popular. I found it on a build from a while back and copied it! Don't forget to subscribe!!!!! Thanks for watching.

@nikolailanier1242 5 лет назад

@@JilesMcCoy I'm the one that had the 2 full martys wrapped in the Madagascar wilsonart...😆

@JilesMcCoy 5 лет назад

Yes, Ill dig up the link to the ones I saw.

@JilesMcCoy 5 лет назад

These were my inspiration: www.avsforum.com/forum/155-diy-speakers-subs/646455-diy-gallery-28.html#post18324487

@dam4274 5 лет назад

Contact cement goes on both surfaces. You didn’t show it so did you glue the laminate too?

@JilesMcCoy 5 лет назад

Yes, cement on both sides, let dry till tacky, and then go time!

@dbbfishing2528 Год назад

What was that glue you were using on the speakon connector internally

@ravver2610 5 лет назад

Hi, you did not use any nails or screws to hold the box wooden panels together? only glue would last the thump of Sub? makes me kinda nervous

@JilesMcCoy 5 лет назад

Most builders only use glue. Its stronger than the wood it holds together.

@DiamondShellStudio 4 года назад

Good Man

@JilesMcCoy 4 года назад

Indeed!!!

@bujoun76 4 года назад

The Definitive Technology Towers have built-in active subwoofers. Add this super sub and you are officially a "Bassaholic"! Congratulations! I am currently pursuing the same title...

@JilesMcCoy 4 года назад

You will get there for sure!

@Kornsk 4 года назад

Yeh, a beast indeed. Did it went down to 22 (Hz)? lol! Crazy bass.

@JilesMcCoy 4 года назад

Lower!

@joselopez-xp3bu 5 лет назад

What amp is pushing this sub? Nice job blessings

@JilesMcCoy 5 лет назад

Its an iNuke 6000.

@tomaszkaczmarek8378 4 года назад

Hi, can you tell me the settings of the limiter in your amp. I have build The same sub but with The NX3000D amp working in bridge and i don't want to blow up the driver. NX has a peak limiter. Do you have also an external rms (power) limiter?

@floppydonger1189 4 года назад

we make high end cabinets at work , painted. we never use any sandpaper higher than 220. also a random orbit would have saved you a shit ton of work

@JilesMcCoy 4 года назад

Those were all hard lessons to learn!!!

@herban30 3 года назад

Super

@DREDKNOT2063 4 года назад

Do you have 1 or 2 and do you plan to add any 18 in bass radiators my current build are two separate 15in each with twin 15in radiators

@JilesMcCoy 4 года назад

Right now I am running 2 GSG audio 18" full marty subs and I have a 21" devastator on the way. Ill be looking at a Stark Sound Sub35 and Sub45 in the near future too. The SS subs both have dual passive radiators. The sub45 is a pretty heavy hitter. 2 Devastators though is where the hard core lives. Ill have a video up for that in a month or so.

@sethh8892 4 года назад

What is it with people in deciding to use passive radiators? They're really shit

@NakeanWickliff 3 года назад

Hello Good sir. Thank you SO MUCH for doing all these videos. You've obviously created many subs since this one. I just ordered my Sealed flatpack from DIYSOundGroup. I've watched this video several times. Any things you would do differently now that you didn't do in this build? Sounds like one of the biggest changes is your use of a Spray Hopper for the paint. Any other great words of wisdom for this build? Keep the awesome content coming!

@JilesMcCoy 3 года назад

Nakean Wickliff Big changes over time: Titebond Ii, spray grade Duratex in a hopper fun, more clamps, being more careful when tightening down the screws on the driver, using filler and sanding all sides of the box, using an electric sander!

@NakeanWickliff 3 года назад

@@JilesMcCoy Could you say just a bit more about filler and sanding? Thank you so much for your response. It's funny I just moved and my wifes father is quite the handyman. I was taken back by how many times he reached for an electric driver/drill (almost never) Everything was hand tightened. Made me feel lazy but then also made me realize how many less screw heads you strip, how less likely you were to over tighten etc. Slow, steady and deliberate.

@JilesMcCoy 3 года назад

Filler and sanding is key for me. Its the only way I can get smooth joints that look good when painted.

@kohnfutner9637 4 года назад

I was going to get the ultimax but the representative, Tim, said the reference HF has better sound quality. Love the look of the ultimax though.

@JilesMcCoy 4 года назад

Do they dig as deep?

@hiviman 4 года назад

i have the dayton reference HF 15'' in 4cu.ft sealed and i love it, its goes deep an plays loud but the best part sounds amazing its fast,accurate blends well with any speakers i've had, i honestly love it

@sethh8892 4 года назад

@@hiviman 4cuft sealed??? BULLSHIT! Did you not see how small the sealed box was for this 18? A 15 in a 4 cubic foot box is complete bullshit. My 15 that would make the 18 in this video look small is in a 4.5 cuft ported box. Ported boxes are exponentially larger than sealed enclosures. Put a port on your box and I guarantee you it'll light that sub up! An enclosure that large that sealed is not a good idea.

@hitsquadfuze 4 года назад

Where did you get the laminate? Thank you and great video!

@JilesMcCoy 4 года назад

I think I got it from Home Depot online. Thanks!

@78schoolboy 5 лет назад

You must cut your laminate much closer to proper size before routing. A .25 inch over hang is perfect and use a small 30 dollar laminate router they sell bits that are perfect you can also use painters tape to hold you off your finished laminate just enough not to scar

@sethh8892 4 года назад

Just use Diablo brand router bits, they have lifetime warranties. If it ever dulls, breaks, or wears out, return it and you get a new one. That's why they're like twice the normal price.

@nicholascremato 5 лет назад

You did a great job!!!

@SoumyaMaitra2008 Месяц назад

Congratulations on the awesome build. I have been watching your builds for a couple of months now. I am super inspired to take up this build as my first build. Before that have three questions for you. 1. With your experience do you think 18" Dayton Ultimax can match up SVS PB 3000? Or do you recommend 18'' ported build kit for that with 18" Dayton Ultimax? 2. How low does this sealed build go? I was looking to hit 15Hz. 3. Can you publish any measured graphs out of the build? Appreciate any comment.

@JilesMcCoy Месяц назад

1) Yes. 2) I think I posted a measurement somewhere for this? This was one of my very first builds though, so maybe not. 3) I don't have any of those details now. This was years ago.

@MrAyrit 4 месяца назад

Great info on build. I wish you would have commented on the sound quality a bit.

@JilesMcCoy 4 месяца назад

Sounds great!

@Justwantahover 4 года назад

I got 10" (Jaycar) woofers in sealed boxes for my 4" FR drivers (just woofers, not subs). The best bass I heard. I had 6" woofers before (vented). But the large woofers sealed sound so much better (same brand woofers).

@JilesMcCoy 3 года назад

Very nice!

@Justwantahover 3 года назад

@@JilesMcCoy Thanks. A song demo of them: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-e_5cxyqwbRg.html

@davidperry4013 4 года назад

My prefered finish is either latex interior wall paint or minwax. If it's MDF or particle board, I would prime it with Kilz, sand it, and paint it with latex interior paint. If it's OSB, Solid Wood, or plywood, I would sand it in several steps, and stain it or just stain just the baffle and paining the back and sides.

@JilesMcCoy 4 года назад

Thanks!