Best Foot Pegs Floorboards for Vulcan 650 S How to install Kuryakyn 7613 Kinetic Mini Floorboards

Подписаться 4,1 тыс.

Просмотров 68 тыс.

50% 1

#Vulcan650s #Kawasaki #Kuryakyn #Motovlog #DIY #Installation #Howto
👇 SUBSCRIBE NOW 👇
/ @kamdorian
🎁SCROLL DOWN FOR LINKS TO BUY THE MODS AND MORE VIDEOS 🎁
🎁BUY THE MODS!!!!🎁
👇Buy CS Racing Exhaust with 5% DISCOUNT👇
csracingusa.com/Kamdorian
👇10% Discount on Quadlock👇
quadlock.refr.cc/kamdorian
👇Buy Kuryakyn Floorboards👇
amzn.to/3ki311o
👇Buy Adapters for Floorboards👇
amzn.to/3ZJeyam
👇Buy Bar End Mirrors👇
amzn.to/3ZNjU4A
👇Buy Clutch and Brake Levers👇
amzn.to/3XEjax7
👇Buy Radiator Grill Cover👇
amzn.to/3qQRB8d
👇Buy Chrome Glow Fender Delete Taillight👇
amzn.to/3kpxuL6
👇Buy LED Headlight👇
amzn.to/3km9TuN
👇Buy LED Flasher Relay to fix hyperflash👇
amzn.to/3CYfz4w
👇Buy Quad Lock Phone Mount PRO👇
amzn.to/3ZGqJox
👇Buy Quad Lock Phone Mount👇
amzn.to/3CYdXrB
👇Buy Quad Lock Vibration Dampener👇
amzn.to/3kqqzBk
👇Buy Atlas Cruise Control👇
amzn.to/3ki4GUG
Thank you for supporting the channel! As an Amazon Associate I earn from qualifying purchases.
In this video I go over how to remove the stock foot pegs on my 2017 Kawasaki Vulcan 650 S and install Kuryakyn 7613 Kinetic Mini Floorboards. The Kuryakyn boards and required adapters can be purchased from Amazon using the affiliate links below. The install is VERY easy and tools required are flat head screw driver, hammer, and 6mm hex wrench (and WD40 if you want to lube the parts). These new floorboards are much more comfortable compared to the stock pegs and reduce vibration felt on the feet. This is a must have upgrade for longer rides. They also look MUCH better than the stock pegs.
MORE Vulcan 650 VIDEOS!
👇LED Headlight Turn Signal Integration👇
• Best LED Headlight for...
👇LED Headlight Install Video👇
• Best LED Headlight for...
👇Fender Delete Taillight Install Video👇
• Best Fender Delete for...
👇Quadlock Install and Review👇
• Best Phone Mount for M...
👇Bar End Mirrors and Levers Review👇
• Best Bar End Mirrors a...
👇Bar End Mirror Install Video👇
• How to Install Bar End...
👇Brake and Clutch Lever Install Video👇
• How to Install Best Br...
👇Vulcan 650 Riding and Meeting Motovlog👇
• Vulcan 650 S Riding Mo...
👇Atlas Throttle Lock Cruise Control Review Video👇
• Best Cruise Control fo...
👇CS Racing Aftermarket Exhaust Sound👇
• Best Aftermarket Exhau...
👇Vulcan 650 S Riding Motovlog👇
• Vulcan 650 S Riding Mo...
👇Radiator Grill Cover Install Video👇
• Best Radiator Grill fo...
👇Kuryakyn Floor Board Install Video👇
• Best Foot Pegs Floorbo...
Thanks for watching!
Follow me on Instagram @kamdorian
Hit the LIKE button and SUBSCRIBE!!

Хобби

Опубликовано:

18 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 199

@Kamdorian 3 года назад

Watch Next Best Fender Delete Taillight ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q7Gd5sYPokw.html

@jordancrawford7999 3 года назад

Front hole is where its at folks, its all about that front hole. Nice.

@Kamdorian 3 года назад

Yes indeed lmao 🤣

@msaw1997 Год назад

Thanks for taking the time and sharing. I'm going to put this to use once my floorboards and adapters arrive. Great video.

@Kamdorian Год назад

Thanks man I appreciate that, glad the videos help. Good luck and ride safe!!

@TurtlesTwoWheelers 3 года назад

Great video my dude, I'm now sold on these for my 2019 KVS, just added to my Amazon cart. Thanks for the easy links in your description! I might just do a quick install video as well for my channel. Keep up the great content!

@Kamdorian 3 года назад

Thanks man appreciate it. You will enjoy the boards. New videos coming on installing new brake and clutch levers and also bar end mirrors!

@sandeshs007 11 месяцев назад

Thanks to your video, just completed the exact same install on my 2019 KVS!

@Kamdorian 11 месяцев назад

That's awesome I'm glad the video helped. Ride safe!!

@dougk.5435 2 года назад

Great job. I have these mini boards but haven’t installed them on my Honda Goldwing. I was debating to get a set for my Suzuki M109. But after watching your video. I’m 95% certain I’ll get a set. Thanks again. By the way. The adapters also come in black. Ride safe. DK

@Kamdorian 2 года назад

Thank you! These are a great set you will enjoy them. I wish I had found the black adapters, I have to still paint mine black haha. Do you have a link to the black adapters? I want to ride a goldwing and m109 some day, they look like awesome bike!Thanks for watching and subscribing! Ride safe bud.

@ritayee2298 2 года назад

Did anyone else chuckle when he said, "It's all about that front hole?" I do identify as a teenage boy at times! LOL

@Kamdorian 2 года назад

Lol glad it made ya laugh! Thanks for watching

@olegyefremov2583 6 месяцев назад

Thanks for detailed, helpful video. I have same vulcan s and bought same floor boards. Very happy with it

@Kamdorian 6 месяцев назад

Awesome thank you for watching. Glad it worked for you! Ride safe my friend

@malcolmbingham7313 Год назад

thanks for info on mini boards i got told i couldn't get floorboards for my Vulcan so i think this is great option ,,FYI clutch is on the handlebars and gear shifter is at your foot for future reference so no confusion

@Kamdorian Год назад

Awesome glad you liked the video. There's so many options for different floorboards that fit the Vulcan. Just need the right adapter. I have the adapters linked in the video description. Yeaa I kept saying clutch by mistake instead of shifter woops

@xinato 3 года назад

Great video!!! thanks for sharing, i think ill buy it

@Kamdorian 3 года назад

Thank you!! Check the description of the video for links to buy the adapters and boards from Amazon. Using my links will help the channel, I appreciate it!

@dimitrikellan9642 3 месяца назад

Thanks for the video. Great explanation and easy to follow. BTW you can adjust the position of the clutch using that black horizontal bar beneath the bike. 🤝

@Kamdorian 3 месяца назад

Thanks I appreciate that! Yup that rod works great to adjust the shifter position.

@kadulopes 10 месяцев назад

Great video. Helps a lot.

@Kamdorian 10 месяцев назад

Thanks! Glad it helped

@mrbundyred 4 месяца назад

A well constructed video, thanks

@Kamdorian 4 месяца назад

Thank you I appreciate that

@marvinsolano2484 3 года назад

Nice video! Go on

@Kamdorian 3 года назад

Thank you!

@marcsc51 2 года назад

very cool , I`d just ordered mine !! :-)

@Kamdorian 2 года назад

Awesome you will love them!

@michaelb.42112 11 месяцев назад

I sat on a VulcanS the other day and it was one of the most comfortable bikes I've ever sat on, now I just need to test ride one. I'm planning on getting boards for my Stryker.

@Kamdorian 11 месяцев назад

Yea the riding position is very comfortable. The stock seat gets uncomfortable after riding for an hour but can be fixed by an easy seat upgrade. The Stryker is a cool bike! I almost bought one but the riding position didn't work for me. I bet that vtwin engine and exhaust sounds real nice!! That's the one thing I wish the Vulcan had. Do you have an aftermarket exhaust on the Stryker?

@michaelb.42112 11 месяцев назад

@@Kamdorian I was going to order a V&H, then realized I'd have to reprogram the chip and all that so it's all stock. It is a BEAST. 72hp and over 100lbs of torque.

@Kamdorian 11 месяцев назад

@@michaelb.42112 yea reprogramming is too much work. I'm sure the stock exhaust sounds nice too! Ride safe man

@michaelb.42112 11 месяцев назад

@@Kamdorian Thanks brother, you ride safely, too.

@two_wheels_are_king9136 5 месяцев назад

Nice job. Very good informative video. Do these floorboards effect your lean angle ?

@Kamdorian 4 месяца назад

They are about the same width as the stock pegs but are thinner so you might gain some lean angle.

@martingalli2786 Год назад

Another great video mate. Can you tell me if I fit these as passenger boards, would they fold up when not in use?

@Kamdorian Год назад

Thank you! I would assume they would fold up on passenger pegs. However they might be a little too big to use for passenger pegs

@troyspain7073 7 месяцев назад

Thanks for the video my first thoughts when looking at that bike, she's differently a keeper. Oh I gave up my harley oh I know right. Divorce luckily I get to keep my balls and guitars lol! 😮

@Kamdorian 7 месяцев назад

Lmao thanks! What Harley did you have? I want a Harley miss that vtwin engine and exhaust sound.

@troyspain7073 7 месяцев назад

@@Kamdorian I had a 1200 sportser jugged it and god knows why put a triumph triple tree on her sort like a mini fatboy, city girl turned heads and talked trash but get her on a country road and no play. I need a liter bike Parkinson's and cancer have me by the balls! Sucks don't get old! I still enjoy riding and sailing oh and of course rock in roll. Keep posting on your upgrades I be in touch! And forget harleys it's like a bad girl friend!

@bobnesbitt9821 Год назад

Great video, thanks for taking the time to do this. Can you tell me what the adaptor part # is ?

@Kamdorian Год назад

Thanks for watching! Here is the link for adapters amzn.to/42WIbVV

@DanielKulka Месяц назад

Good video.

@Kamdorian Месяц назад

Thank you!

@sudarmantodarmadji8896 Год назад

Thanks, brother

@Kamdorian Год назад

Thank you for watching bro!

@Roundbeadadvocate 3 года назад

I got these for my Indian scout sixty and they are without a doubt, the best single modification I did to the scout sixty. It offers much more long distance comfort, increase in turning angle before scraping, and more real estate to position my foot for numerous styles of riding, especially left hand fast and low turns. I would say that if I were only able to do one mod to my bike, this would be it, followed closely with the mustang seat with better padding. Of course, you can always throw a pillow under your ass if need be, but the floor boards are an absolute game changer. Totally awesome for speeds in high rpms in top two gears as you aren’t fighting the wind resistance of your leg balancing on the clumsy feeling stock pegs. The loud free flowing pipes, performance intake, computer flash, mini windscreen, ez brackets, bags, decals, better tires, better brake pads, etc. are all great, but the floorboards are hands down the best mod, should come standard, and worth every penny (at least for the Scout 60).

@Kamdorian 3 года назад

I totally agree! Comfort on the feet is very important. Some even get the larger boards for even more real estate for the feet but I think these are a good balance of size and comfort. How do you like the Indian Scout Sixty? I have yet to test ride an Indian, always hear good things. Anything you don't like about it?

@Largetalons Год назад

Sounds to me like you're the perfect candidate for a.... car.

@jayryan7473 Год назад

Doug You're comparing floorboards to decals and bags LoL Serious question: Do you actually ride a motorcycle?

@sonnybowman 6 месяцев назад

Use the clutch lever adjustments. We can see them under the foot peg.

@alangriff1 3 месяца назад

A tip...lightly squeeze the circlip before installing it. ....don't use a hammer either. Also squeeze it into the groove using pliers.

@Kamdorian 3 месяца назад

Good tips, I appreciate it!!

@bedevere007 2 года назад

awesome

@Kamdorian 2 года назад

Thanks!

@Zeroplanetz 2 года назад

Hello, do you know if that headlight and housing would work on the Vulcan 900 custom? Thank you!

@Kamdorian 2 года назад

Hello, I am not sure. Check out my headlight install video you will see the plugs that the headlight uses. If your Vulcan 900 custom uses the same plugs then it should work. It is a universal headlight that can fit many different bikes.

@Zeroplanetz 2 года назад

@@Kamdorian yea, I’m wanting to get a all black housing and put a led unit in it. Not just a H4 bulb like what is mostly what one can find when searching for the custom. I’ll look for that video and check it out.

@geoffallert1921 2 года назад

I need these.

@Kamdorian 2 года назад

Links to buy from Amazon are in the video description, thanks for watching!

@thalakkal 2 года назад

Hi Kamdorian The link for the adapter says it will not fit the Vulcan 650s! I checked with Kuryakyn support and they said the same! Is it definitely part 8813?

@Kamdorian 2 года назад

It is definitely 8813, I have it installed on my bike right now and it works! The Amazon description says 2018 kawasaki motorcycles. It's strange that kuryakan says it won't fit. If it ends up not working you can always return it. It worked perfectly for my 2017 vulcan 650 and I even saw on vulcan forums that others have used it too.

@patricklarouche9164 2 года назад

Hi, what are the adapter # ? I want to install those floorboards on my Vulcan s 2016. Tks

@Kamdorian 2 года назад

Kuryakyn 8813 Splined Male Mount Peg Adapters for Front Footpegs and Floorboards: 1987-2018 Kawasaki Motorcycles, Chrome, 1 Pair www.amazon.com/dp/B000IOJ496/ref=cm_sw_r_awdo_navT_g_S3G70H41MBXQWSM6NXVY

@DaveMcFly Год назад

Hi my friend has a 2022 of that bike what adapters do get and where can you get them I did a chat with j and p cycles and they said those 7613 won't fit any info would be helpful thanks

@Kamdorian Год назад

This is the adapter I used from Amazon but it's unavailable now. Try searching for it on Google I'm sure other websites sell it.Kuryakyn 8813 Splined Male Mount Peg Adapters for Front Footpegs and Floorboards: 1987-2018 Kawasaki Motorcycles, Chrome, 1 Pair a.co/d/eevx12K

@ed.t.hansen6499 2 года назад

Will this work on a ctx700 also , has a spline converter, i see

@Kamdorian 2 года назад

I am not sure honestly but you can check kuryakan website or ask their customer service.

@ed.t.hansen6499 Год назад

whats the purpose of the spring with the clamp and/or cotter pin ?

@Kamdorian Год назад

I believe it allows the boards to fold up

@periwinkle4538 2 года назад

Ive got the floorboards but im trying to find adapers for my vulcan s , what ones did you get?

@Kamdorian 2 года назад

These are the adapters I used, seems they are out of stock on Amazon though. I'm sure you can find online somewhere Kuryakyn 8813 Splined Male Mount Peg Adapters for Front Footpegs and Floorboards: 1987-2018 Kawasaki Motorcycles, Chrome, 1 Pair a.co/d/5Y49wI9

@Tanaisilver 2 года назад

Goood! Great video. Can you show us how it folds? It’s the whole point of the springy, right? I’m just curious on how good that works with this set 🖤 Thx a lot!!

@Kamdorian 2 года назад

Yes will show this in the next video!

@Tanaisilver 2 года назад

@@Kamdorian thx 😁

@steveholliday4519 5 месяцев назад

Great vid but the whole left foot fitting under "the clutch" drove me nuts lol

@Kamdorian 4 месяца назад

Thanks yea drives me crazy when I rewatch the video as well 😂

@sargeant002 3 года назад

How do you like the CS Racing exhaust setup?

@Kamdorian 3 года назад

I love the exhaust! It's a nice rumble and deeper sound without being too loud like the delkavic exhaust.

@sargeant002 3 года назад

@@Kamdorian thanks for the feedback. That's what my research has led me to believe listening on phone and TV speakers. ;)

@ed.t.hansen6499 2 года назад

Read that the mini's can fit for the passenger also ?

@Kamdorian 2 года назад

Yes I think they can

@willk1451 2 года назад

Will these work with extended reach foot position?

@Kamdorian 2 года назад

Yes it will work with any foot position. You just have to adjust which of the three holes you use to mount it and also the angle of mounting.

@billmeloche4918 Год назад

Hey, good video...Could you please send me the link for part numbers for floorboards and adapters please...Thanks

@Kamdorian Год назад

Thanks man here's the boards link Kuryakyn 7613 Motorcycle Accessory: Kinetic Mini Board Floorboards without Adapters, Gloss Black, 1 Pair a.co/d/3HrGghh

@Kamdorian Год назад

Here's the adapter link Kuryakyn 8813 Splined Male Mount... www.amazon.com/dp/B000IOJ496?ref=ppx_pop_mob_ap_share

@billmeloche4918 Год назад

@@Kamdorian Thank you so much:)

@Kamdorian Год назад

@@billmeloche4918 your welcome man ride safe!

@varuzhanbasmajyan2265 2 года назад

What's the grip like in the rain? Been thinking about putting MX style pegs purely because of the terrible grip on the standard pegs in really wet conditions.

@Kamdorian 2 года назад

I have never ridden in the rain or wet conditions so I'm not sure about the grip but they are pretty good hard rubber feel so I assume it would be fine as long as you have good rubber boots on.

@ChanyaAndWazzaThailand 2 года назад

I'd like to see a short video example of how the new floorboard rotates through the 45-degree angle. In my mind, I feel that it will foul up when it takes an impact.

@Kamdorian 2 года назад

check time stamp at 9 minute 26 seconds of this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V_bAJOQ2sfE.html it shows how the boards fold up a little bit. If you drag the boards while riding it will definitely scuff up the edge and bottom of the boards. I don't really lean that hard so I haven't scraped them.

@ChanyaAndWazzaThailand 2 года назад

Yeah, I don't think anyone wants to scrape their pegs and the Vulcan foot position rides high anyway. I'm just concerned about the spring-loaded movement which you haven't shown in this video. In another video where you adjust the gear lever, you move the footboard to the rear hole position and I gather that was to help with the spring-loaded movement of the boards. It would just be nice to actually see how much movement the boards have if the boards are fixed in the front hole. This video has encouraged me to get the boards because there is so much crap out there that say they fit the Vulcan, but they always show the boards fitted to every other bike design other than the Vulcan 650. One size definitely does not fit all when it comes to the Vulcan

@Kamdorian 2 года назад

Yea I moved the mounting hole so it's more comfortable for my foot when resting and also to reach the shift lever. The boards really don't fold up that much at all, definitely not as much as stock. But I have had no problems with scraping. You will like the boards give them a try if they don't work out you can always return them from Amazon.

@ChanyaAndWazzaThailand 2 года назад

@@Kamdorian I've got the set on my shopping cart. I try to avoid impulse buying - lol

@dashsunil 3 года назад

In video, it appears the gap between the foot peg and the break/gear is substantial. The new one is adjustable, hence a better choice. 😊

@Kamdorian 3 года назад

Yes the gap was bigger before but still easy to hit the levers with feet. Adjustable pegs/boards are so much easier!!

@alangriff1 3 месяца назад

Short and long shifter rods are available to remedy the gap problem

@barnacheajeff Год назад

What year is your vulcan s? Would those 8813 adaptors fit in a 2020 model?

@Kamdorian Год назад

Mine is a 2017 model. Kawasaki doesn't change anything in new models besides the paint color so the adapters should work fine.

@michaelbergwell Год назад

I was wondering this too. I have a 2023 and amazon says the kuryakyn 8813 adapters don't fit my bike. I assume they will work, just don't want to waste money if it doesn't.

@Kamdorian Год назад

@@michaelbergwell pretty sure Amazon is wrong. It says it won't fit my bike either but I have them installed and they work

@michaelbergwell Год назад

@@Kamdorian That's what I figured. I just ordered this, so I guess I'll find out!

@chinwakebhai 3 года назад

What number adapters did you use? I checked the Amazon website, and it says that the adapters sold together with the boards do not fit the Vulcan 650S !

@Kamdorian 3 года назад

The boards don't come with adapters. Check the video description for the adapters I used, they are meant for all kawasaki bikes and work perfectly with the 650s.

@konstantineantyukhin9827 Год назад

@@Kamdorian the link for adapter not working anymore, do you remember model number for adapter?

@Kamdorian Год назад

@@konstantineantyukhin9827 try this link amzn.to/3Z9kKI6

@RobertoOrtizFalagan 3 года назад

You can adjust the height of the shift lever by turning the shift rod one way or the other. You'd be surprised what a difference a few turns can make.

@Kamdorian 3 года назад

Ahh good to know thanks bud!

@Kamdorian 3 года назад

I just made another video on how to adjust the height. Thanks for the tip!

@corneilcorneil 3 года назад

@@Kamdorian uou even can take the shift lever off and slide it back in a higher position without touching the rod adjustment.

@Kamdorian 3 года назад

@@corneilcorneil awesome will try that one day, thanks again!

@PaulsMotoZen 3 года назад

So how did the ride feel? Did you make any more minor adjustments?

@Kamdorian 3 года назад

Ride felt good, noticed less vibration on the feet at highway speeds and much more comfortable for long rides. I need to adjust the gear shifter side a little more so it's easier to get my foot under the lever and change gears

@PaulsMotoZen 3 года назад

@@Kamdorian Or, you could adjust the gear selector itself, and leave your floor boards where they are most comfortable for you.

@Kamdorian 3 года назад

@@PaulsMotoZen Good idea! Yea I recently learned the level height can be changed so I will do that next!

@michaelbergwell Год назад

Just put these on my 2023. Did you have any issues? The left side turned out perfect,, but the right floorboard isn't parallel to the bike.

@Kamdorian Год назад

Hey no I didn't have issues. Did you try adjusting the angle by rotating it and or trying a different hole for the mounting location on the floor board itself?

@michaelbergwell Год назад

@@Kamdorian The front part of the floorboard is farther away from the bike than the back part (but only on the right floorboard), so there is no adjustment for this. I didn't realize that Kuryakyn says it doesn't fit! I should've done more research...

@Kamdorian Год назад

@@michaelbergwell so I just checked my bike and yes I have the same issue on the right side board but it's barely noticeable and does not impact the functionality of the boards. I guess it's just an aesthetic thing but hardly noticeable unless you stare at it. These are universal floor boards that fit many bikes, it's all about having the correct adapter for the Vulcan 650

@michaelbergwell Год назад

@@Kamdorian Yeah you're right. After a few days, I'm already used to it. Even though the right one isn't perfect, it's still so much better than pegs. Anyway, happy riding and thanks for the video.

@Kamdorian Год назад

@@michaelbergwell ride safe my friend!

@Peter-wc4kr Год назад

Why would they not supply the adaptors with the boards?

@Kamdorian Год назад

I wish they did too! But different bikes need different adapters so these boards can be used on any bike as long as you get the right adapter for your bike.

@miguelbrito3474 2 года назад

Can you tell which ones is best and more confortable: yours, the Kuryakyn 7613 or the Kuryakyn 4357?? Thanks

@Kamdorian 2 года назад

The 4357 might be more comfortable since bigger and more contact with foot, but it is bigger and bulkier.

@miguelbrito3474 2 года назад

@@Kamdorian and what about the Kuryakyn 5653???

@Kamdorian 2 года назад

@@miguelbrito3474 probably the least comfortable out of the three options since this one has more metal than rubber and is smaller. Rubber absorbs vibration so more rubber means more comfort usually.

@miguelbrito3474 2 года назад

@@Kamdorian thanks for the information 👍

@ed.t.hansen6499 2 года назад

Will the 7613 minis fit the passenger also?

@keithmason3461 2 года назад

With all due respect, its not the clutch. Its the gearshift lever. The bolt is known as a locating pin or clevis pin which held by circlip. Excellent well informed video. Well done.😃

@Kamdorian 2 года назад

You are correct! I kept calling it clutch by mistake. Thanks for sharing the pin and clip names, I did not know them.

@jayryan7473 Год назад

Keith Mason Umm he was correct every time he referred to the left side as the clutch side. If you don't know what side the clutch is on it's time to start learning LOL

@Rcguy2591 Год назад

@@jayryan7473 you’re joking right? He was clearly was calling the shifter the clutch, he even emitted it in the previous comment, so it looks like you that needs to learn dude.

@scottfuller56 3 года назад

Does any one know if these adaptors will fit 2021 model as they say only up to. 2018

@Kamdorian 3 года назад

I am pretty sure it will still work. The foot pegs and mounting of them on the Vulcan 650 has not changed.

@dereke457 Год назад

Hi, did it work in the end please?..I'm thinking of now getting aset for my 2021 Vulcan S

@patricklarouche9164 2 года назад

Hi, wa What is the adapters # ? Thank you

@Kamdorian 2 года назад

Here are the adapters Kuryakyn 8813 Splined Male Mount Peg Adapters for Front Footpegs and Floorboards: 1987-2018 Kawasaki Motorcycles, Chrome, 1 Pair www.amazon.com/dp/B000IOJ496/ref=cm_sw_r_awdo_navT_g_S3G70H41MBXQWSM6NXVY

@ed.t.hansen6499 Год назад

Where to buy, to shop to asia?

@Kamdorian Год назад

I got mine from Amazon. See the video description for the links. Not sure if they ship to Asia but I would assume they do

@bkbaltes92 3 месяца назад

Anyone know what kind of bolts the adapters use?

@Kamdorian 3 месяца назад

Pretty sure it uses the existing bolts that hold your current foot pegs on. You just need to use these adapters amzn.to/3PDPmif

@bkbaltes92 3 месяца назад

@Kamdorian sorry was referring to the bolt that holds the board to the adapter. For anyone else the bolt is an Allen head 5/16-18x1

@Kamdorian 3 месяца назад

@@bkbaltes92 ohh I see yea that bolt came with the adapters or boards

@vicentebanzonjr.6720 2 года назад

Where can i buy this Foot step board

@Kamdorian 2 года назад

On Amazon here is the link Kuryakyn 7613 Motorcycle Accessory: Kinetic Mini Board Floorboards without Adapters, Gloss Black, 1 Pair www.amazon.com/dp/B00XA9H6J6/ref=cm_sw_r_awdo_WZFCPMTNNFT01SD4M7NZ. Also you will need the 8813 adapter also found on Amazon. Check the bottom or the video description for the links.

@albertosalvalaggio8214 2 года назад

Idioma en español gracias

@Kamdorian 2 года назад

sorry I don't understand your comment.

@corneilcorneil 3 года назад

The problem with replace boards on the peg mounts is that the boards are to much outwards. Huge lever and forces on just one mounting point.

@Kamdorian 3 года назад

Yea I see what you mean but it has worked fine so far and I see many vulcan owners have similar boards or even bigger ones.

@corneilcorneil 3 года назад

@@Kamdorian Check the 650S setup, it is sporty and light. No cruiser quality at all. When you add floorboards from this type, the lever becomes much higher. Also a eventual heel shifter gives extra load and wear. Do some research, people add sidecases and the bolts break, people add boards and ... Just never stand on them, the bike is not designed for that and is no cruiser. Real floorboards are mounted at 2 points on the braket, in this case, you have just one bolt. A lot people call me a troll, but it is just reality. The 650S is a Ninja with forward controles. Same light setup, same sporty front. For example, that are no cruiser fork or handle bars, but the same setup as a light scooter. The bar ends are there for a reason. In combination with the high revving, you can expect problems after a time. I know that i don't react with "badass" "wow, awesome" or "looks sick", to much experience for that. Take care.

@TurtlesTwoWheelers 3 года назад

@@corneilcorneil I feel like most Vulcan S riders aren't too concerned about standing on their Floorboards, who knows maybe that's just me.

@corneilcorneil 3 года назад

@@TurtlesTwoWheelers Most 650S owners are new riders and think that they own a solid cruiser because Kawa called the Ninja with forward controls a "Vulcan." Check the whole VN line since the beginning, and you will see that the 650S is no Vulcan, but just a attempt to keep the name alive, as environmental standards prohibit the sale of genuine Vulcans in many countries. Work on VN's and you will see what i mean. A 650S is a fast flimsy bike. Just compare the engine, handlebars,(just 22mm) mirrors, shifting and brake system, forks, rim and tire size, exhaust, sound, rpm's, weight, ... and you will see what i mean. Just like adding apes on a sportbike don't make it a chopper, just like moving the controls forward, don't make the 650S a cruiser. It is a good looking, fast and fun bike, but no cruiser.

@Kamdorian 3 года назад

@@corneilcorneil yea I don't plan on standing on the boards lol and I'm only 145lbs so doubt it would break if I did stand on it. I define cruiser as a bike with a comfortable riding position of mid-forward controls and higher bars so you are sitting in an upright position, not hunched over with feet behind the knees like on sport bikes. We can debate semantics of what to call the bike all day but in my book it's a cruiser with near sport bike performance so maybe we settle on agreeing that it's a blessing from the motorcycle gods!! Besides, I prefer to enjoy the bike rather than worry about what it's called or classified as.

@Mr75044 2 года назад

Only problem. Foot boards usually have a Rocker gear lever. So you can heel it in to 1st.

@Kamdorian 2 года назад

Yea you can easily add a heel shifter for that purpose.

@Mr75044 2 года назад

Job done..

@OKCvulcanrider Год назад

@@Mr75044 I have a couple questions. That rocker gear lever.... they make one for this bike. I just got my first bike, a 22 V ulcan S 650, so excuse my ignorance.. but if u stop say in 4th, it shifts to first with one press? Or multiple. I stopped quick once, in 4th... and it didn't want to shift while sitting still. I had to rock the bike a little to get it into 1st. Rookie mistake 🤷‍♂️ Next question... what shoe size do u have @kamdorian. U said u have the extended reach shift bar also.... you've hade these for a while now. What floor board hole position, and what shift bar did u end up going with. I'm sure you've made adjustments after the install. I have 9.5 US 👞 so I was thinking I should order the extended bar with this. If I chose not to use it, I have a spare if needed and board is adjustable... sooo.... just my idea. Any advise.

@edgy8481 Год назад

Appreciate informative mods procedural but...I believe it's pronounced "koor-ya-keen". You may be too young to remember the TV series "The Man From U.N.C.L.E." where one of the main protagonists (played by David McCallum) was named Illya Kuryakin.

@Kamdorian Год назад

Haha yea it's a tricky name to pronounce, good to know the proper way thank you! I saw the more recent movie man from uncle and it was great.

@edgy8481 Год назад

@@Kamdorian Because in my language all the vowels are pure(I.e., ah-eh-ih-oh-uh), we tend to take to such names more easily😁

@Kamdorian Год назад

@@edgy8481 what language do you speak?

@edgy8481 Год назад

@@Kamdorian Oh, I thought it was English...kidding! I'm Filipino by birth so it's Tagalog.

@spiritmediumdaniel7161 2 года назад

why would you want your floorboard to fold up if your foot is always going to be on it?

@Kamdorian 2 года назад

Folding allows some more space when storing the bike. I personally never fold them up but it's just an option if people want to. Also if you are leaning too much and the board scrapes the ground it's better for it to fold up and not get stuck on the ground and potentially cause an accident.

@ed.t.hansen6499 Год назад

its a slip ring and they make a tool to get them off.

@Kamdorian Год назад

Yessir they do!

@prawnstar9213 2 года назад

I think the spring is supposed to go through the hole not over the top

@Kamdorian 2 года назад

Hmm I'll double check but it looks exactly how the spring looked when installed with stock foot pegs.

@prawnstar9213 2 года назад

So, I found out it depends on if your mini aftermarket floorboards came with a new “spring” doohickey that goes between the spline. If you use the OEM springy you go over the top just as you did! Hazzah! One tip for anyone looking to install the Kuryakyn “mini” floorboards… or any of their floorboards really. They require the Kuryakyn spline manufacturer part 8813. The 8813 is sold out EVERYWHERE! Trust me I tried every site and finally called the manufacturer who told me they were aware. It’s because of the lockdown in China.. they said new 8813 splines won’t be available until August. The 8826 which is claimed to work for Kawasaki is poop. The hole in the center isn’t big enough for the bolt, the size of it is too wide for the gap so you can try to hammer it in or shave off the metal. It’s a headache so don’t waste your money because there’s good news. Check out revzilla and make sure you have your Vulcan S EN650 listed as your bike so you can search for things that fit only that bike. When you search for splines there’s a set of PUIG splines EXACTLY like the Kuryakyn 8813. I just installed them on my 2021 vulcan S ABS no issue. According to the site they work for all Vulcan 650s made from 2015-2023. So thankful for PUIG right now as the OEM pegs were the only thing ruining my long rides (after getting a new seat). Thanks to this video the floorboard install took 30 mins or less! 🏍

@cameronhughes2644 Год назад

Call that a clutch one more time…

@Kamdorian Год назад

Misa human misa make a mistakes...

@spiritmediumdaniel7161 2 года назад

you went about it the hard way. just mount the adapter, then attach the floor board

@Kamdorian 2 года назад

Not sure what you mean, I thought I did do the adapter first.

@kawigoodtimesroll 2 года назад

its not a clutch its a gear shifter .

@Kamdorian 2 года назад

You right, I meant to say shifter

@genefehr9149 Год назад

Where is the clutch? Left hand, not left foot.

@Kamdorian Год назад

Yea you right sometimes the mind and mouth have a mix up 😂

@ed.t.hansen6499 Год назад

stock pegs all need replaced. They go cheap !

@Kamdorian Год назад

Yea stock pegs are bad!

@olddoc4430 2 года назад

I can’t believe that you repeatedly call it a clutch.

@Kamdorian 2 года назад

haha yea kept slipping!

@gilescobedo5700 2 года назад

Cut the chitchat! U talk way to much

@ed.t.hansen6499 Год назад

email kuryaklyn get no answer; no matter what on any web site; kury not answer.

@Kamdorian Год назад

What question are you asking them?

@ed.t.hansen6499 Год назад

where to buy these. Kury. sure does not reply to emails

@Kamdorian Год назад

Amazon my friend, they have 15 in stock Kuryakyn 7613 Motorcycle Accessory: Kinetic Mini Board Floorboards without Adapters, Gloss Black, 1 Pair a.co/d/85fmuD5

@Kamdorian Год назад

Make sure you get the adapters from amazon too, good luck!