No video :(

BEST Galaxy S4 Loca UV glue glass repair video

Подписаться 9 млн

Просмотров 561 тыс.

50% 1

Get your Black GS4 Glass HERE: www.repairsuniv...
Get the White GS4 Glass HERE: www.repairsuniv...
UV Light on Amazon: www.amazon.com/...
UV Loca Glue on Amazon: www.amazon.com/...
SMART PHONE TOOL KIT: www.amazon.com/...
Double Sided Tape for Smartphones: www.amazon.com/...
LET ME KNOW IF ANY OF THOSE LINKS STOP WORKING.
----------------------------- If I helped you out today, you can return the favor by following me! -----------------------------
Instagram: / zacksjerryrig
Facebook: / jerryrigeverything
Twitter: / zacksjerryrig
Pinterest: / zacksjerryrig
GooglePlus: plus.google.co...
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This video will show you everything you need to know about repairing your Samsung Galaxy S4 phone with loca glue. Once you get the glass off of your phone, the rest is pretty easy. The trick is to try and not let any bubbles get under your screen when you are laying down the top glass. Try to avoid letting glue seep up into the ear piece area or down into the home button. If glue does get up there, you can usually clean it off from the back with a paper towel and Alcohol. But its best to just avoid it anyway.
EXTRA VIDEOS TO WATCH:
Removing the glass on a GS4:
• Galaxy S4 JUST THE GLA...
3 Common Mistakes on a 'Just the Glass' repair:
• 3 Common Mistakes: Sep...
GS4 Tear Down Video:
• Samsung Galaxy S4 Scre...
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 425

@TestTest-re9wj 7 лет назад

Years ago I was part of a testing division of a optical lens manufacturer and we were working with plastic lens bonding using loca glue and a machine that held and cured the glue at the same time and the best method for applying the glue was 5% of the required glue be applied to one side and the rest applied to other we also noted that it required far less glue than I've been seeing people use in the tutorials it's a fluid that is intended to be applied so thin that just a cc or two is required also I'd apply the bulk of the glue to the new glass and cure it face down on the light source let gravity help prevent the issues

@yeejay6396 2 года назад

Interesting... Damn dude!

@jessec314 10 лет назад

Just did mine last night, your instructions work very well. I HIGHLY recommend people also watch the glass removal, teardown and tips videos linked in your description. I used wire for the first 1/3 and switched to a card (an Uno #9 to be precise). I much prefer the card over the wire, as it does the same job but you don't have to fumble with the wire between heatings. If I would do one thing different, I'd put a little extra bit of glue in the center of the screen. Having a little extra glue to push out the sides is REALLY handy if you have bubbles to work out. If not, you can work it out the side anyway. Not saying your video was misleading, I just didn't put enough in the middle and had three bubbles to work out. Annoying. The best thing is instead of paying somebody to do it, I did it myself, plus I now have a UV light, IR thermometer and a heat gun - all of which will come in handy at parties.

@JerryRigEverything 10 лет назад

Jesse Connell Heck yes. Im glad you got it all figure out. Its a complex repair. And thanks for the tips! Its good for other people to read so they know what to expect in the future. RU-vid is great for learning new things. I too, love using the cards more than the wire. I exclusively use cards now.

@mohammedsalah4049 Год назад

@@JerryRigEverything how much ml you need for a normal amount iPhone

@joshharper1906 8 лет назад

just finished doing this for my sister. Great guide but I am never doing a glass only repair again.prob took me 4 hours. I over did the glue a good bit....so from cam is no good but I told her the back cam is the better cam anyways and it works fine. No selfies :)

@darylbe 8 лет назад

+Josh Harper after you did it, would you say the touch screen was perfect? I have replaced the glass, but used the tape, and sometimes it doesnt respond very well. I have the loca glue, but was curious about others experiences

@joshharper1906 8 лет назад

It seems to work really well...like new. Just becareful of applying too much glue....which is hard to judge

@darylbe 8 лет назад

+Josh Harper thanks.

@biplav32 7 лет назад

lol

@foxywright1315 6 лет назад

Can you fix my phone

@skopec7288 8 лет назад

Thanks for your video! I was able to successfully replace the screen using the LOCA glue. This was my second replacement of the screen on this phone. The first time I only used the double sided tape. That repair didnt last long so I thought I should try this other method. It was a bit nerve wracking but it worked and I suspect this will help keep the phone intact much longer than the last repair. Thanks for this tutorial! Only had one tiny bubble first try. FYI: for those who want to attempt this but don't have a UV light. I purchased a cheap $9 UV flashlight at Wal-Mart and it worked great!

@simon515 9 лет назад

Great video! It's very relaxing listening to your soft voice.

@updlgq5885 6 лет назад

Can a regular alcohol wipe work? I used an alcohol wipe to clean the screen digitizer when replacing my samsung core glass. After cleaning, the screen doesn't work anymore with touch. Could the alcohol wipe have messed it up? I didn't use the uv glue. Can the isse be fixed if I add the glue?

@Texaca 5 лет назад

would a small vacuum pump work or aid, in getting out the bubbles, if the phone was placed in a small air tight container, and you vacuumed out the air?

@ashrafshahriarkhan9278 Месяц назад

Yeahh 10 years later. Great to hear your voice my friend.❤

@brennanrogers34 10 лет назад

Always the best, most informative videos. I have an issue with a 4S repair I did. I did the power button since it was stuck.. Got the new ribbon cable in, it clicks now, but the button still doesn't work. The prox sensor doesn't work either, and it's causing the phone to die really, really fast.

@dannyr055 10 лет назад

the part you got is defective or is not compatible with your phone, try another replacement part it will work

@joshharper1027 9 лет назад

I have fixed several moto x phones and find that the glass removal process is manageable. This video seems doable as I am quite familiar with UV glue, my only question is that for this particular phone, when the uv glue seeps into the home button, and the light is placed on it, what keeps it from sealing up completely? And would it be more wise to just go ahead and completely remove all parts of this phone to ensure no excess glue goes anywhere you don't want it to?

@3ikeru 9 лет назад

Hello...i had to change the glass of an iphone 4 but the glue is entering between the lcd and the backlight...how should i seal it? I tried with double sided tape but its still entering...please help ...i wrecked 4 lcd and lost few 100$

@bestusernameever6249 8 лет назад

Did the same exact process and it was too much glue. It went on top where face camera is and aslo hit where the lcd is attached with flex cable and in about a week touch screen was going haywire. When i would wake screen it would act as if being touched. I advice for little less glue and clear taping top part before placing glass, once dry pull tape out. Thats how i did the next one without any problems.

@stenvikteam 7 лет назад

bestusernameever i just did the same thing with my s4... Litteraly 5 minutes ago. Im fucked. Buuut, i have ordered the s7 edge, so im fine actually XD

@diyfixtool830 Год назад

Great walkthrough to really get a feel for the upfront nature of the difficulty/luck of doing the repairs.

@Chris-go9ti 9 лет назад

nice trick i learned is to work the bubbles out before you move the glue to the edges. you made it look nice then moved the bubbles. Less glue comes out the side my way.

@IamGilgamesh666 9 лет назад

Awesome video. Your RU-vid channel is a deadly resource. Would the average customer be able to appreciate the difference between the glue method and the tape method? Also, are there any devices for which you should ONLY use the UV method, and not the tape method?

@AnarcheDiver 9 лет назад

Jerry, you're awesome! Perhaps you're the man for my question. I repaired a Galaxy S4 i9505 glass only and reused the original LCD. I removed the LCD from the middle frame because I dislike the idea of liquid glue getting stuck on the inside of the phone. I used a mold and everything worked fine, except for the bronze aluminum foil on the rear of the phone that doesn't stick well anymore. This causes the glued lcd + glass to not stick very well to the frame of the phone now. So my question is: Is this aluminum foil vital to the phone functionality or can it be removed or replaced by something available in stores? Many thanks in advance for reading and responding! ;)

@Chris-go9ti 9 лет назад

AnarcheDiver that is what makes the touch work. It will still work even if it is not pretty. Did you buy some cellphone two way tape? Good job on removing the lcd. few do because it is a 100 dollar mistake if it cracks. You could honestly buy about 20 glass screens and experiment with the glue amounts , little to more, until you get the exact amount vs the price of a new lcd.

@lorumipsum6805 8 лет назад

proper example of a How To make a How to video....thank you very much

@magnusfolke-olsen3762 8 лет назад

Thanks again mate! used my iron to get this loose aswell! Ordering the glue now! Couldn't have done it without you!

@ginunggagap 3 года назад

almost succeeded yesterday seperating an oppo f1s glass with just a Cloth Hanger, Molybdenum wire and a standard soldering iron , i dont have a heat gun i just slide the hot part of the soldering iron on the glass for a while... was successful seperating lcd without damage and working but it got some burns probably coz of too much heat..

@veteranrepairshop5070 8 лет назад

Nice, but maybe I'll stick to the dual sided method myself. It's true the LOCA does make your phone sturdier but if experience told me anything, if it's going to break there's nothing you can do about it, gravity always wins. On the plus sign, if I were to fix a phone that was secured with dual sided tape, it'll be way easier to remove the glass again. Nice video, subbed.

@zerousen 8 лет назад

The issue with this is that the air gap between the glass and the lcd/digitizer causes issues if you push on the screen slightly too hard. In my experience, at least with the S4, I've had to use LOCA glue in order to prevent this issue.

@veteranrepairshop5070 8 лет назад

***** yeah, I've heard of instances where that is happening. In such a case I'd do the same, but not all phones are like that.

@zerousen 8 лет назад

+Veteran Repair Shop it's probably different for phones that have the glass and digitizer fused together, rather than phones that have the digitizer built into the LCD.

@Vandy5000 9 лет назад

Is this similar to the eom adhesive? Also should the glass be broken again by chance are you able to remove it or is this glue a more permanent solution?

@JerryRigEverything 9 лет назад

Vandy5000 Once you have put the aftermarket LOCA glue on the LCD it is near impossible to remove once it has cured.

@SouparnoRoyce 6 лет назад

Hey Jerry, the video is really very helpful, however the glass of my secondary phone, a S4 broke in an accident. Though I have a spare glass, but I can't really source down any Loca Glue. Is there any alternative for it? Like, any such synthetic fabric glue, which they call it Dendrite here in India?

@drmirza5216 3 года назад

Nice video, thanks for sharing. I have an old Samsung note 5 device, I had its battery replaced recently which is working fine but the golden color paper behind the screen is peeled off from the front and back as well from a few places. How can I fix this? Please guide!

@presidentroarie_7063 Год назад

Thanks for the help so much!!! The only thing is that the link for the UV light doesn't work.

@kendallhallett 7 лет назад

I usually have the patience and sense of things to do well at such tasks. Something I've found useful in similar 'projects'; I have found disposable (so clean) hypodermic syringes and needles available at the local farm supply store. The smallest commonly available needle is 21G, which is pretty small and takes a lot of pressure to get anything with much viscosity through it. That said, it occurs to me it might prove helpful in controlling the amount of glue by using less and 'injecting' more as needed, especially at the top of the screen where too much glue getting in the upper components seems to be a common complaint. The obvious problems would be 1) is the glue too thick to be forced through a 21G needle? *One could use a 12G needle and syringe to 'suck' some LOCA into the syringe and then switch to the 21G to 'inject' it behind the glass.* 2) do you think there would be enough room to get a 21G needle behind the glass without scratching anything? A 21G is 0.03225 inch or 0.8192mm OD and 0.02025 inch or 0.514mm ID. 3) bubbles would obviously be more of an issue, but it seems like the biggest area of concern is at the top. The bottom and sides seem less prone to excess glue. I'd be interested in your thoughts on my idea here. Thanks for these videos.

@kendallhallett 7 лет назад

How did I get the 'bold' in there? Oops.

@flstudiomobileuser1 2 месяца назад

Which one is the best glue for sealed lcd screen replacement with 3 type transparent glue, white glue, black glue? Which one is strong bond and harder to attach lcd screen. I always use black glue bcoz it so strong than transparent glue. Bcz black glue is hardener and can tolerant to heat than transparent glue is easy to melting down.

@nickjenkins5343 9 лет назад

Great video Jerry, One question, perhaps a bit dumb - is the procedure for the S4 "mini" the same as the standard S4?

@JerryRigEverything 9 лет назад

Nick Jenkins I have never attempted a 'glass only' repair on the S4 mini, but I imagine it would be the same. As long as the glass is the same design.

@TheNaiqqi 9 лет назад

What can I do to avoid the glue from touching and filling my camera, speaker, buttons and all the things that can be messed up for the loca? Did you get them out somehow? Thanks

@rahil.pariswala 5 лет назад

Nicolás Oberti remove display totally and fix it outside 😂

@kevinkelly1529 5 лет назад

Use less glue... Using just barely enough is the trick. Go very sparingly.

@anthonylouis6874 7 лет назад

hi, I saw a lot of glass replacements with the UV glue, but some displays has spots near to the sides after the procedure, apareantly because the glue had leaked to inside of the LCD. How to know if the LCD display that I get in hands will let the glue leak, and how to seal or stop the leaking, providing secure job and non spotted LCD display?

@AN-zk7kz 7 лет назад

this is very helpful , thank you a question comes to my mind , would be efficient if one spreads the Loca glue all over the LCD with a ruler or something before putting the glass on?

@user-tb1zk7hb5v 4 года назад

hi there. i have the same UV lamp. how many minutes are needed for the shown LOCA glue to be applied successfully? the lamps are applied to the LCD side, right ?

@JAYRAY00 10 лет назад

With reference to glue around the home button, if glue gets around the home button then it is also likely that it's gotten into the soft keys next to it. If glue soaks into these, they will be ruined. Also excess glue seeping out around the sides means it will severly reduce the stickyness of the double sided adhesive border. You're doing ~10 phones a week and not getting customer returns/complaints?

@JerryRigEverything 10 лет назад

I normally use less glue than is shown in the video. And no, I still have not had any complaints. if you use too little glue, and have to press hard on the screen to get it to flow to the edges, it puts stress on the LCD after you cure the UV glue. So even a little drop would crack the screen.

@ryangyles 8 лет назад

Thanks bro, the stick man glue application helped with my bubble issues.

@FURIOUSAM31 9 лет назад

I just changed the glass at a non-samsung shop, and the phone works fine, but still there is liquid bleeding out from the home button. Can I solve it by my self or I have to bring it there again?

@JerryRigEverything 9 лет назад

Sam Gardner Its just excess glue... There is no way to 'fix' it... just gotta keep absorbing it with a paper towel or tissue or something. It'll stop in a week or 2.

@FURIOUSAM31 9 лет назад

JerryRigEverything that's good news for me, thank you mate

@dkn822 7 лет назад

Very helpful video man! One question, I have to replace the touchscreen on a LG Optimus G, could I proceed the same way as shown in this video? Is the glue really necessary or could I just use the double side tape in the edges?

@heavyhitter886 9 лет назад

Hello, Any thoughts on what to do if one used too much glue (4.5ml) for the repair ??

@alaedinehidq4405 6 лет назад

nice video with clear video resolution but want to ask you im planning to change my note 5 upper glass do i have to take the back cover and separate the screen on a side , or i can direclty remove the upper glass and clean everything and apply the uv glue with uv light and what about the glue if it comes on sides ... what you recomend me to do

@RemixLabz 9 лет назад

I got a question... Just took my S4 from repair few hrs ago and I noticed that my fingers are getting sticky... Then I saw glue is coming out from my home button. I've cleaned it up with paper towels and glass cleaner but it constanly leaks from the home button and now it started to leak from the sides as well... Is that a normal thing after screen replacement? Should I wait and get rid of that extra glue somehow (now it's leaking less I think), or I should complain? Btw, replacement cost was around 35EUR which is around $40, that's cheap I guess? By the way awesome job! Very well explained, wish I saw your video earlier! Shucks! :) Keep up with the great work!!

@JerryRigEverything 9 лет назад

Sarmamusakagulash You did get a good deal on that repair. That is way cheap. If they use too much glue, it is normal for it to leak out a bit. If it hasnt stopped yet, you could probably take it back and have them clean it out a little better.

@RemixLabz 9 лет назад

Thanks for your quick response. Yeah it's very cheap but I got glue under my home button and front camera, now it's completely blury... Doesn't matter I'm going to use it like this for some time, it's not a big deal. Cheers!

@soptorixhyarandhara5511 7 лет назад

plz do a video on oneplus 3T! im from india! i have the same problem! only the glass is broken! everything works fine! but when i contacted the service centre they said that they will change the whole assembly which will cost 13 to 15k! which to too much! half cost of the phone! plz help me out! i can't find anywhere a video like this about oneplus 3! plz help me out plz +JerryRigEverything

@UndisclosedGuitarGuy 10 лет назад

Thanks for this great video. I've been repairing phones using double sided tape only for a couple of days now but I'm going to make the jump to using loca glue. I have a question though, would it be a good idea to first remove the lcd from the phone by disassembling it before putting the glue on it and attaching the new glass to it, to prevent glue from leaking into the phone? Or does that seem unnessecary to you?

@JerryRigEverything 10 лет назад

UndisclosedGuitarGuy That is actually a REALLY good idea. And the best way to do it... BUT the only reason that I dont do it, is that you risk breaking the LCD... Its a pretty fragile little guy and its glued in pretty tight. So it just depends on how confident you feel in doing the whole repair. Good question.

@alapon77 9 лет назад

This worked PERFECTLY! Thank you very much for sharing. One more manly skill to add to my résumé.

@mackenziehopkinson 6 лет назад

alapon77 so what makes you qualify for the job " I can do a glass only repair on a Samsung galaxy s4 " Sold

@markkrosalita7339 5 лет назад

what kind of alcohol did you used sir? can first aid alcohol be used too?

@jawadsharifi3270 8 лет назад

Hi thanks for sharing your video. I tried to replace glass on I phone 6 but the loca glu damaged the lcd, how to use the glu in order not to damage the lcd. thank you

@sk8. 10 лет назад

What happens if you were to break the replacement screen that used loca UV glue to hold it down: Is the glass removable, or would you have to replace the digitizer? Nice channel by the way. Subbed.

@JerryRigEverything 10 лет назад

Thanks for subscribing! You CAN remove loca UV glue the same way that you removed the normal glue that was factory installed, it just takes much longer and is a lot harder. It doesnt come off near as easy as the factory glue.

@JAYRAY00 10 лет назад

JerryRigEverything Really? I find it comes off easier. Probably because the factory glue is a solid (OCA), and the replacement is a liquid (LOCA). Maybe it's the type of LOCA i'm using...

@LEXxTALIONS7913 9 месяцев назад

Can I replace the glass whitout using the glue? Please reply to me. Thank you for your kindness 🙏

@AlexAlex-bh8fi 7 месяцев назад

Also you need to have uv light without uv light the glue will remain liquid

@KamraanMirza 9 лет назад

I did it for the first time worked perfectly BUT i put the phone away for 2 weeks and tried to turn it on again but it wont turn on. There is a big spot in the middle of the screen looks like dried loca little darker though. any suggestions ?

@SimoPortti 5 лет назад

Zack my man! I have question for you my handsome bald man; I recently purchased whitestone's domeglass for my samsung note 8. I was using one already and I needed to swap the glass cause it had cracked. Anyways there was some problems during the installation and long story short the phone was COATED in that glue. Now I cleaned my phone with alcphol cloth, microfiber cloth, tissue and some water. Now it seems like I didn't get all the glue off since my domeglass surface feels rough and my phone isn't as slick, but rather a bit rough. What would you suggest tp get the glue off? I tried wiping it off with alcohol clot but it didn't do anything and now I am thinking of nail polish remover but I wouldn't want to try it in case something goes wrong and I ruin my phone.

@Dustimus_Prime 9 лет назад

First off, awesome video! I replaced two S4's using this method and it worked fantastically. However, I have run into a small problem regarding air bubbles showing up AFTER the glass had been placed. Everything looked fine before going to bed that night, but the next day some bubbles showed up along one side and in the corner. My guess is that maybe I squeezed out a little too much of the loca glue through the sides and upon setting there was a little separation. Any tips on somehow being able to get those bubbles out? I was thinking about heating it up and trying to squeeze the air back out, but I fear just letting more air in as well. Any advice would be great. Thank you!

@JerryRigEverything 9 лет назад

Dustin VanCour If you are using loca glue to hold the glass down... its possible that the glue just hasnt cured enough. (Its not totally dry.) Maybe your UV light isnt strong enough for the 2-3 Minute cure? Id leave it on for 5-6 minutes to see if that will completely dry the glue.

@Alex233xx 10 лет назад

I was wondering if the 2mm double sided tape works well because I didn't use it. I ended seeping UV glue all over the lcd including the back. After I cured with uv light/sunlight, the screen went blank, but touch still works.

@Deses 6 лет назад

Wow you sounded a lot less enthusiastic back in 2014! You've improved a lot. :D

@MikeD-lr3ev 9 лет назад

love watching your videos! do you think its better to remove the LCD from the frame when using the LOCA?

@JerryRigEverything 9 лет назад

Mike D Hey thanks! I would remove it. Mostly because you don't want excess glue inside the phone. It can mess up your phone over time.

@jonvalerio3441 9 лет назад

Hey Jerry, how do you manage not to get glue over the front camera and sensors ? And how can you clean the glass in front of the camera lens ? .. Keep up the good work!

@JerryRigEverything 9 лет назад

Jon Valerio Putting the right amount of glue on is key... but that takes time and experience to learn how to do. (even than its still hard.) I put the double sided tape between the LCD and Camera, and sometimes that helps keep the glue out as well.

@jonvalerio3441 9 лет назад

hey i managed to get the right amount of glue, and it worked out perfect, no glue in the camera, ear piece or home button. i couldnt of done this repair without your video and advice. thanks a lot, and keep those videos coming. Thumbs Up All The Way!!

@JerryRigEverything 9 лет назад

Nice man! It took me a few times to figure out the right amount of glue. Good job for finishing such a tough repair!

@imjur7206 3 года назад

Your skills is so great.

@abdullahmahmud2051 7 лет назад

thanks for the video. i have a question. I dont have the UV light. without UV light, can I follow your tutorial? plz let me know any suggestion

@nicoarasamuel1173 6 лет назад

Hey, great video! I have a question, can you make a video about how to glue the display on the motherboard (the rest of the phone)? I didn't found a metod yet and i am still searching

@elbox96 8 лет назад

hi, i have a question: what happends if i put out of the phone just the SIM and the battery when i put the phone under the UV light? does something get broken? thank you

@Ds-Techs Год назад

Can loca uv glue be used with touch glass that's already laminated with oca film

@Farie977 6 лет назад

Is it okay to use an all-purpose clear glue for the repair? I wanted to replace the glass on my Note5 but don't want to make it permanent.

@nathanpelling3710 10 лет назад

Hi Jerry, Brilliant video by the way. I have the S4 LCD seperated and i've applied new loca glue. The LCD is still perfect and working but the touch doesnt work anymore ? Any idea what that is ? Have you seen this before ? Thanks Mate.

@JerryRigEverything 10 лет назад

Ya, man, that happens. There is one more layer of glass that sits on the outside of the LCD and if that gets knicked or the ribbon cable gets tweaked, than it stops working. As far as I know there is no easy fix for it.

@ramseyf5102 10 лет назад

JerryRigEverything I am in the same situation. After curing the touch screen doesnt work. Thing is i know i tested it after cleaning right before adding loca. So i removed the glass and now it works again. Not sure whats happening here.... Any thoughts?

@GermAsianGirl 10 лет назад

in theory could you use tape at the top and bottom to prevent the glue from seeping over the proximity sensor, camera, and buttons? I've heard incorrect application of the loca glue can mess it up

@JerryRigEverything 10 лет назад

Monica Ervin Yes actually, I have used tape to 'contain' the glue in the past. Its not fool proof though, as excess glue can still seep over the tape.... just try not to get too glue happy and you should be ok.

@user-tb1zk7hb5v 3 года назад

hi. i am trying to insert glass on sam a30s. Have removed the old glass, cleaned the LCD apply loca and it was good but after minutes loca from some places is dissapearing. what is my mistake ? i have a lamp , when and for how much time to use it ?

@stevemankelechi4505 3 года назад

Thank you so much for throwing more light God bless you

@timemachine2525 9 лет назад

How many phones can you do with x amount of loca glue? If glass is say 6 bucks and you need x amount of glue per phone what is the cost ratio for glue and glass..also noticed you didn't use a mould. I am considering picking up a vaccum lcd separator but not sure it would be that much more profitable, aside from the newest screens the lcd and glass can be picked up fairly cheep even a 5s like 30 bucks not sure on galaxy s5 ...sure the iphone 6 or newest are pricy ..ideally would love to make clear 100 bucks a day though not sure if in a city of 2million if that many phones break.

@JerryRigEverything 9 лет назад

Cory M Sounds like you are on the right path man, With the right amount of advertising you can easily clear 100 bucks a day, even without 'glass only' repairs.

@elshiftos 8 лет назад

My first attempt at this. I didn't have too many bubbles and found them quite easy to chase to the edge, HOWEVER, I didn't use enough LOCA to fill the gap and air kept leaking back in the sides! Now I'm trying to figure out a way to recover from this......sigh!

@scania823 9 лет назад

Can someone help me i've just had the top glass replaced in my gs4 and it's got air trapped inbetween the lcd screen and top glass how can i get the air out?

@ishbenowan4329 10 лет назад

Whooa you really make it seem super duper easy,that is why i am suscribing to your channel keep up the good tutos ! Thank's

@JerryRigEverything 10 лет назад

Thanks man! I try to explain it as simple as possible.

@jerimayjancorda2282 4 года назад

Hi sir. Can i apply this method in my xiaomi mi9? The touch screen of my phone has cracks due to accident drop. But the phone is working fine. Only has cracks. I want to replace the touch screen only not the lcd.

@Purplegt22 8 лет назад

love your videos man! your videos have helped me replace four screens successfully now. i enjoy doing this as crazy as it sounds. thank you for the help and keep the great videos coming.

@JerryRigEverything 8 лет назад

+purplegt Thank you! I'm glad I could help out a bit. Repairing stuff is definitely enjoyable.

@donpepejvb75 8 лет назад

what kind or brand uv light did you use? the link you provided is for a cheap uv flash light

@BIGNASTY-zf2lb 9 лет назад

JerryRidEverything I just recently got a Galaxy S4 from my friend and the LCD screen and digitizer is screwed and the screen is cracked. will it affect the phone at all if I replace the LCD screen and the Digitizer and then replace the screen?

@PlayJewel 6 лет назад

How come in this case the excess glue did not fuck up the lcd’s backlight ?

@sajidjan75 4 года назад

How to remove touch from orignal panal like s3 s4 or any orignal panal

@muhammedshahbazsharifawan194 8 лет назад

Bro if loka glue isnt available in my contry and i dont want to use double sided tape than what other thing i use silicon glue works?

@davidroman4781 7 лет назад

Muhammed shahbaz sharif awan. order online

@nmvasquez91 10 лет назад

Looks like uv gel for nails. I actually have some and i have a uv nail dryer. Do you think it would be a bad idea if i used that to secure my screen replacement?

@JerryRigEverything 10 лет назад

nmv91 Ive never used those before... I doubt the UV gel for nails is optically clear though... so I would recommend against it.

@internalcomputerrepairs4768 9 лет назад

probably the best video so far nice work man!

@fortzdr8744 5 лет назад

question: can you put LOCA glue on the back/recent key on j2/j3 models?

@anthonyvinay9943 3 года назад

Can I use that glue to attach UV tempered glass screen protector?

@Mrvrabac23 8 лет назад

Hello, I need a little help, Can I use this glue to paste a screen to frame of phone? If you understand me, I don't need to stick digitizer with LCD, just to make screen harder not to have "breathing effect"? I wanna do that on Xperia Z, so if anyone can suggest me will this work, because edges of screen aren't transparent.

@baloo217 9 лет назад

Hi, thanks, nice video. I have a question for you, i fix an s4 with loca glue, the lcd got a stain on one corner now, somebody told me that , that hapens becouse the glue touch the side of the lcd . is that posible? Or maybe some of the glue wasnt dry enough and after start using the phone stars geting like that? Start like a very small stain and it got biger over time. Waiting for your response. Thank you.

@JerryRigEverything 9 лет назад

jorge m Ya, it could be glue seeping into the LCD, it doesnt happen normally. There might have been a minor cut into the digitizer when you were taking it off. Your screen should still work normally though.

@baloo217 9 лет назад

Yes. It works perfect.. thankss

@thumbstarrepair 10 лет назад

You need to bond AMOLED and glass away from the housing with the alignment mold or a spare scrap s4 bezel.

@JerryRigEverything 10 лет назад

Not on the S4's and S3's when you have the bezel already in place. Its not worth trying to pry out the fragile LCD.

@thumbstarrepair 10 лет назад

JerryRigEverything respectfully disagree. You want uncured glue still residing inside the phone?

@JerryRigEverything 10 лет назад

To each their own. I do about 10 phones a week, and as long as you put the correct amount of glue down on the LCD you wont get any seeping out the edges. But if its worth your time, money, and risk, you can always pull the LCD out and do it your way.

@eddie.carrera 10 лет назад

Can I use a small LED UV lamplight to cure the LOCA glue? Because the huge lamplights are quite expensive and I desire to just use it once since its my screen's phone that I will change. I mean I al not doing it for work Thank you again!!

@JerryRigEverything 10 лет назад

sensorium3 Yup! I have heard people that have used those and have been successful.

@doctrinehigh 7 лет назад

hi, have u ever used an expired loca glue? what happen if i use it?

@JoshuaG 6 лет назад

Hi jerry , i was hoping if i can use a mosquito killer to cure loca glue , since it also has uv ? Can it be done ?? Tnx

@Jakob6174 5 лет назад

Try to get UV with a peak wavelength of 365nm

@gayumnehara6507 3 года назад

Hi can i know when luca uv gell damage may be effect to get greenish display (i have problem with my macbook display) How can i contact you i want to know something about this

@binhly813 4 года назад

Do you have to have a UV light to do this?

@soufbel3455 4 года назад

What it i put the glass on the screen without laca? Is that OK?

@elbox96 7 лет назад

hi , is it possibile that my menu and back buttons doesn't work anymore because of the uv light?

@johndavids7009 10 лет назад

Great video. The previous owner of my s4 repaired the glass himself, which left a large bubble in the middle of the screen, about 3 x 1 inches. Is there anything I can do to get it out?

@JerryRigEverything 10 лет назад

If he only put it down with the sticky tape it would be easy to pull up and use LOCA glue on. Or just wait till it breaks again and then use the LOCA.

@brennanrogers34 10 лет назад

Hey Jerry! I have an issue with a 4S. I did the power & prox cable replacement. Now the button clicks again, but still doesn't work. The prox sensor doesn't either now. It's also draining the battery very, very quickly. The cable itself looks fine, I don't think I tore it anywhere, what do you think is causing this / any suggestions?

@JerryRigEverything 10 лет назад

Its hard to say. It might just be a bad cable. Older electronics get finicky sometimes.

@anazizo1 6 лет назад

But how do I detach the LCD from its frame after removing the glass screen

@hichamnad9107 9 лет назад

you have the voice of bob ross

@mrsjayceful 8 лет назад

May I know hw much glue i need to use to fix an iphone 4 screen?

@brianjtarr 5 лет назад

Anyone know what glue to use in order to attach an opaque glass back onto a phone? The fitted double sided adhesive that comes with replacement glass really isn't very effective.

@pauld8747 5 лет назад

I work in a repair shop, and had the same issue. I have much more luck with paying much more attention to cleaning the glass and the metal frame. Sometimes the adhesive that comes with back glass isn't really good in the first place so that can contribute to the issue.

@lilljacob 5 лет назад

Uv or sun light? Been no sun light for 3 days now.....

@shaqhobson5074 4 года назад

where can i get that uv lamp youre using? i really like it

@barcode949 8 лет назад

im watching this on my repaired s5 thank you for the s5 tutorial the bad thing its that i have like 3 really little bubbles LOL

@ariesomed769 3 года назад

My macbook have a Green Tint it more visible when on the dark/black color, it occurs about 1-2 hours then it disappear, but it come again after shutdown and I turn on my mac. Can this UV glue method solve my issue?

@igohard1991 10 лет назад

Hey man you are awesome!!! I learn a lot by watching your videos. Keep em coming. Houston, Tx

@JerryRigEverything 10 лет назад

Thanks for watching!

@Meheheteehee2 9 лет назад

Is the glass you linked to in the description OEM? Or at least laminated?

@jackadrianzappa5919 9 лет назад

Does this LOCA glue do the same thing as the one is being replaced? I.e. if the screen gets damaged again, we can use the heat gun to remove and replace this replacement screen?

@JerryRigEverything 9 лет назад

+Jack Adrian Zappa The LOCA glue that you can buy on amazon is much stronger than the factory glue. So no... if you crack the screen after using the LOCA, you probably wont be able to separate it again.

@jackadrianzappa5919 9 лет назад

Is there a less strong glue that I should use then? I cannot predict the future and who knows if this were to happen a 2nd time.

@iL0V3DNB 9 лет назад

+Jack Adrian Zappa I used LOCA to fix the screen of my girlfriend's phone. She broke it again, and i separated it with the same method, without any problem :)

@jackadrianzappa5919 9 лет назад

+Darko Donnie Cool. What brand? The one they started here?