Here’s the list of products reviewed. More details in the video description. Thank you! MOPAR: amzn.to/3QSuguh Toyota: amzn.to/3BStlWe Hondabond: amzn.to/3QZmWgq Versachem: amzn.to/3SkDy3m JB Weld: amzn.to/3Sks8wg Pro Seal: amzn.to/3QXn3cj Permatex Right Stuff: amzn.to/3xFIhEJ AISIN: amzn.to/3S0YKeX Permatex Ultra Grey: amzn.to/3xE40wS John Deere: amzn.to/3BuFkYS Loctite: amzn.to/3DFbXps AC Delco: amzn.to/3QYmsXT Yamalube: amzn.to/3Bv4aI2
Don't know if you realise this, but for people like me this is peak entertainment. After 10+ years watching yt regularly, this is one of my top favourite channels, and I await every weekly video. Keep up this amazing work. And on the side note - these results from sealant testing were quite surprising for me.
Ummmm, dude... Todd has 2.61 million subscribers.... a vast majority of them find this stuff "Peak Entertainment".... so honestly, I believe Todd realizes this....
I agree with you. I especially enjoy the "tempo" of the videos. He's machine-gunning through his projects, yet...doesn't skip anything. Imagine that! 100 % accuracy on full auto
An oil filter test would be awesome. Too many comparison videos I've seen are counting pleats with no measurements of filtering capability, oil flow restriction, or some way to test if a 15000 mile filter is any better than a 5000 mile filter. Thanks for keeping up the good work.
I'd love to see an oil filter test. I've taken to buying the car manufacturer oil filters in bulk (Toyota and Mazda), which certainly seem to be high quality, and even provide lubricant on the rubber seal. But over the years I've bought various different "premium" brands, but I don't really know if I'm wasting my money or not.
He has tested oil filters in the past. Seems like a long time ago, tho. Be VERY skeptical about the "testing" on RU-vid channels. I've owned Fords for 40 years, and only NAPA or Motorcraft get the nod, because of their long standing relationship with Ford Motor Co.
I agree. Just counting pleats doesn't really say much. A true test would include flow restrictions, flow filtering, filtering size, and so on both when new and after 5k miles use.
I am a car mechanic. And i see all sorts of brands and also take the filters apart after replacing them. The only realy bad thing i see is when filters have been on the car for way to long. I seen filters fall apart when i touch them. Other than that we use mostly purflux filters wich are realy good. I personaly use mann filters. Because i think they are Just built slightly better. Bosch is also fine. We have a budget brand here in the netherlands called nipparts. And i think the steel used on those filters is to weak. As my filter splitter goes trough it without any problem. The filter itself is smaller than any other brand.
As a Honda technician of 13 years with a surplus of Hondabond, I'm happy to see it in the top 3. I'm impressed by how well it holds up sealing engine parts such as timing covers and oil pans with so much change in temperature. It's pretty special stuff I even use it for small stuff around the house.
LOL.....surplus is always the best. Toyota here...that stuff works AWESOME.....but i got to check out that MOPAR stuff if I run out of toyota......shocked!!!!!!! I have used 3m weatherstrip adhesive in the past too...that crap is Crazy good.
The consistency of quality with these videos is insane also seeing how the videos(testing methods improved) and also the confidence in your voice has grown since the older videos which is great, these videos always interest me even if it’s something I don’t need I’ll still watch
That mopar RTV never let me down when I was a dealership tech, its still the only RTV I'll use today. That AC Delco stuff is really good on machined surfaces.
GM has a great RTV as well. The anaerobic sealant only cures when thin coats are in contact with metal ions and not in contact with air. It's not a gasket maker.
Your thorough testing methods leave no stone unturned. Very impressive! Manufacturers could learn a lot about product improvements by subscribing to your channel.
Over 20 years ago I worked at a dealership. My manager was a former mechanic and swore by Mopar gasket maker. Very neat to see it do so well in the testing.
The work you put into these videos is almost overwhelming to even watch. Just imagining the time you spend researching, designing and executing them. The editing, the organization and patience, Doing it all the time, over and over. And every video shows how much you love doing it. It's great to see that. And VERY IMPRESSIVE!
Great test but as a former Gm tech I would recommend using the acdelco rtv that’s gray in color over the red. The red is used a lot less commonly and is usually used in machined aluminum surfaces that are torqued together at a much higher pressure than the gray rtv. We always used the gray for valve covers and oil pans which seems to be your intended application test.
@@contraband1543 You need a sharp scraper to remove it. Also it was a great sealer but now GM has a better sealant that is much worse to get off surfaces.
An important, variable missing is how these sealants react with hot and cold cycles. Also sealants like the Yamalube and AC Delco are designed specifically for very thin, spreading on machine surfaces that expand and contract very quickly, such as a motorcycle case halves. Different sealants for different applications. Still a great test and video though, keep up the great work.
Hondabond is awesome. Forgot how awesome it is , because I haven't messed with a bike in 20yrs. Anyways I remembered that stuff as I was doing a VW vr6 timing chain job and couldn't have used a better product.
This was my thought as well. Any gasket like this is going to get hot and cold a lot, which could easily affect the pressure. I wonder if the AC Delco product could possibly have relied on it heating up to temperature to fully cure, as well as some of the others to fully cure in the center.
One note... The AC Delco is an anaerobic sealant, which is made to seal precision machined surfaces, like transmission cases. To see it's true capability, you need to test it with a precision machined surface. That's why it's a thin gel, so it can seep into microscopic scratches to prevent leakage. Also, it only harden in the absence of air (hence the name, anaerobic), which is the condition is machined surfaces.
No. Any of these sealants can seal machined surfaces. I build computers and the thermal fluid between the machined surface of a processor and the heat sink is a paste. A 1" by 1" surface that must have complete thermal contact or the processor will overheat. Silver thermal paste has been the industry standard for 20+ years. No "gel" required to seep into microscopic spaces. (lol) You are lying or have no idea what you are talking about. Gel doesn't creep into microscopic spaces. Molecules of whatever sealing agent is being used will be forced into the spaces when pressure is applied.
@@aaronbritt2025, you're wasting your time with these keyboard warriors. That ac delco stuff is the best thing going for anything to do with hydraulics, the beauty of the product is lost in this video. It is designed to cure only in the joints, any sealant that oozes out of the joint will mix harmlessly with the oil, unlike a rtv which will create lumps that will cause all sorts of trouble with valve bodies. It is simply a case of the wrong application for the product in this video.
As a former mechanic, I use Mopar ATF RTV on any application that calls for RTV silicone. To be clear, I'm not a Mopar fanboi, I just really like that stuff. The ATF RTV seems to be a little thicker out of the tube than the regular Mopar RTV. Very nice to work with.
I am a technician at an Alfa Romeo dealership. Since Alfa is a Mopar brand, we of course use Mopar products as they are what is specified in the Alfa repair information. Alfa specifies Mopar Threebond RTV. I'm not sure what the differences are between it and the standard Mopar RTV, except that it is gray instead of black. The Mopar Threebond is very good stuff, I've been very impressed by it.
@@andrewweltlich9065 Threebond makes a lot of the stuff for OE manufacturers. I know they make several flavors of Yamabond and Hondabond. Including Yamabond 4, my favorite anaerobic sealant. Edit: I really like Threebond thread lock products as well!
That mopar rtv is what I’ve used on everything, for the price to performance, you can’t beat it. I actually started using originally on Chevy products and got weird looks when I’d pull a new pack out.. but it was the only that that kept them from coming back with more leaks, but after seeing the results you got.. my decision to order the mopar rtv was for the most part always right.
Thanks! I ran across your tests on the jumpstart power packs after seeing all the various brands on Amazon and trying to figure out which were good/junk which probably saved me more than I'm currently donating but will send more as I watch your testing. You have an incredible knack in fabricating your tests and am in awe of those as much as the videos! Keep up the great work!
I gotta say it's beyond impressive that PF gets out one of these videos every week! The excellent reviews, empirical tests, and not to mention top notch video and content quality are FAR from easy to do in such a fast and consistent manner. Thanks again Project Farm, great vid as always!🙏
So true. You’d never imagine just how much work it takes to produce a video like this, or any video really, until you try doing one yourself and realize how horrible it is.
I think one of the most important takeaways from this test, at least for car people, is the resistance to gasoline. High performance cars for example will often find their oil diluted with some gasoline over time. Using a sealant that does not resist gasoline well in general may result in future leaks. I wonder what the difference is between ethanol free gas, E10, and E85. Could be a good test in the future. E85 cars especially have issues with oil dilution. Having an oil and gas resistant RTV for oil pans and other oiling system seals may be pertinent.
@@repairvehicle your fuel pump uses the gasoline in your tank as a lubricant that’s why you see high failure rates of fuel pumps from people who constantly run past E. So yes cars do use gas as a lubricant and it’s not uncommon for high compression motors to force some gas into the oil in the means of blow by
@@repairvehicle please get help for your comprehension difficulties and for the love of god, don't advise anyone on how to repair a vehicle until you understand how they work.
I've used most of these over the years. The Mopar RTV is the one I prefer for my personal vehicles. Mopar actually has multiple formulas of RTV, and the one for transmission pans seems to be the best all-around in my experience.
You should try molar Three Bond I’d bet you could put a oil pan up let it cure then pull the bolts out and it would be fine for years😂 when I used to have to pull oil pans at dodge for warranty engine work it would literally bend the pan!
The one test you missed, may be arguably an important one: Heating and cooling cycles. I.e. heat with torch allow to cool and do this 5 times then compare the pressure test. This is a very important test because most gaskets get heated and cooled every time the engine runs. Also the head from the engine may actually help cure the gasket!!!
I use gasket makers almost every week. It seems to really depend on what the actual item is being sealed. The material makes a big difference. Engine pans and parts all seal differently. I've had just about every brand fail at some point. I do use the permatex 90min pretty often along with Motorcraft. As a mechanic, we don't have the luxury of waiting 2 or 3 days for sealant to dry. As a trick, just like with adhesive tapes, I use a heat gun to heat up the surface of anything being sealed. Heat works really well with 3m adhesive tape also. Keep up the good work!
You are by far one of the best channels to watch. I love the rigor that you put into your videos, and I appreciate that you mention when you change out something to make a more pleasant viewing experience. I would love to see you and Adam Savage get together and do some crazy tests. Edit: Forgot to ask for what I wanted, I know it would be expensive but I would love to see a video regarding on-demand hot water heaters. Or portable solar panel backs for backpacking/camping.
I see these little water heaters in bathrooms in SE Asia and South America. One of ours is over ten years old and works perfectly. Cost about $125 new.
I’m just now watching your RTV video, I was a diesel mechanic for 20 plus years and the best RTV I’ve ever seen was was a gray RTV sold by international (the truck company) at their parts counter. We used it to seal rear covers on 3408 caterpillar engines when doing clutch jobs. It never leaked and it smoked when it touched the regular Autozone bought RTV. I’d like to see that added to your future comparison videos..
I usually use permatex, which we have at my shop as a consumable. When I want something to last, I get TA 31 from Ford. This is the sealant for the power stroke oil pans and I suspect the same sealant you are speaking about in Ford badging. It has been amazing in my use.
Having been an engineering technician for the last 26 years I definitely enjoy your channel. I actually envy you the way you explain things and set up your test is impressive!!! and it is easy to see you really enjoy what you were doingKeep up the fine work!!!!
Can’t thank you enough for all the videos you produced over the years. They are top notch and extremely helpful. Such great information. Thanks for all of your efforts.
Great one I was surprised when I had to use this on my car. I bought the Toyota brand from the dealer and have great success and used many times. Love the content.
This channel is the best you can find high quality reviews for basically anything. The video log is so large. I specifically searched for this along with you channel and it came up.
This was by far the most impressive breakdown of a product I've watched. I do video editing for fun.... That's all.... And basically, I just respect the amount of work that went into this one! I do for all but holy cow this one's got my head spinning. Much respect! Thank you! I learned allot
I love all the videos that project farm has made over the years but using the AC Delco in this lineup was kind of an apple to oranges comparison. I work in a GM dealer and use the AC delco gasket maker all the time. It's not supposed to cure like regular silicone and is an incredible product. If it's applied properly it will never leak. Keep up the good work project farm. I love the videos.
I like Permatex # 2 non hardening ; been around since the 70's ; resistant to coolant and lubricants ; Permatex Form-A-Gasket No. 2 Sealant is a slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications.
This one was very enlightening! I was surprised how almost none had cured throughout. Loved learning about their performance and the side information about instructions was really revealing.
The anaerobic sealant is really designed for 2 machined surfaces and works best when clamped tightly. It does become hard, when clamped between 2 machined surfaces, and then allows to get hot under normal operating conditions. Most sealers never see these kinds of pressures, and will only be exposed to heat and splashed lubrication.
RTV silicone isn't designed to work on "metal machines surfaces" it's silicone just like what you can use with a caulking tube. I think everyone is overthinking this and honestly Project Farm should have included generic or major brands as well like General Electric or 3M silicone. But those high purity brands will all perform about the same and they have been proven to work well enough for head and oilpan gaskets so my question is why pay extra for the RTV gasket maker for the toothpaste tube and the funny dye colors for the silicone. Second argument I just realized is that premade gaskets are made for finely machined surfaces, gasket sealer is certainly designed for suboptimal surfaces otherwise it would not be sold in the form of a paste or resin form.
@Infernal Daedra those silicone brands you're referring to are nothing like rtv! You definitely need to do your research, those silicone brands do not adhere to surfaces nowhere near as good as rtv silicone
Three Bond makes a couple varieties of hondabond, yamabond etc. It's 1104. I've also seen 1194 which may just be a new number, same product. Best stuff I know of.
Many years ago when rebuilding a Yamaha motorcycle, we used Yamabond 4 which is a semi-drying liquid gasket. It worked great. It worked so well, we used it when working on tractors and such. At some point, we ran out and bought Yamabond 5, which is the product you reviewed. it really was very poor product and while one may thing yamabond 5 replaces 4...it doesn't, it is a totally different product. Great video and love all the others. Thank you for what you do!
Great video as always! Unfortunately, the AC Delco Gasket Maker is an anaerobic sealant used for transfer cases due to low thermal and bonding pressure needs due to metal-to-metal case halves. It is not an RTV. I'm sure you were surprised by the cherry red color... GM considers their "Engine Sealant" as their RTV gasket maker for oil pans. PS - I bet Harley Davidson's "High-Performance Sealant-Gray" would be a great one for the next video!
The comparison I didn't know I wanted to see! I had high hopes for the deere sealer because I use it so often in my line of work, I might have to start stocking the Mopar stuff
Todd, it can't be said enough re: the amazing/thorough job you do, and how effective your tests are i.e. how helpful they are to everyone who watches. I hope you able to do these for years to come; on into old age where you find yourself testing/comparing: Geritol equivalents and hearing aids. 😁 😄
Nicely done! I always struggle to pick which one of these to buy for my needs, and normally all I rely on are the claims on the package, which are often exaggerated.
There were some interesting results in this video! I once bought a truck with a cracked transfer case. After draining it completely and preparing the surface well, I sealed the crack from the outside with Permatex Right Stuff. That repair held for well over a year and a half before I sold it. But it looks like maybe the Mopar RTV would've been a good choice too. 😉
@@ProjectFarm can you do a comparison of epoxy garage floors kits like Rustoleum Epoxyshield, Rocksolid, Mr. Epoxy, Armorclad? It is really confusing to understand all the options
The Mopar RTV you used was generally used on oil pans and valve covers. 44 is for oil pans, 41 is for trans work and 46 is for differentials. Mopar ThreeBond would be a closer to match to the others. It's usually used for timing covers and upper pans. Extremely good stuff. As always awesome test. Waiting for you to get a "projectfarm approved" sticker to sell to manufacturers!
No surprise with the MOPAR. It’s all I use in the shop for sealant. On the AC Delco anaerobic sealant, I think the surfaces have to be machined for it to really work, and it takes a while to cure. I remember it being used on transfer cases on GM trucks for their housings.
From years working as a tech at a Dodge Ram Chrysler Jeep dealership I remember fellow technicians talking about how the Mopar RTV was the best in the industry but I figured it was us just backing our brand. Happy to see our thoughts were on point. Never had a problem with it. I remember always being amazed at how all those diffs never leaked after a service. I was Chevrolet before Mopar so I was always used to having gaskets on everything so it always seemed like some kind of sorcery when I buttoned up a diff on a Grand Cherokee using nothing but Mopar RTV and it didn't come back. Just one of the many reasons I still drive Mopar to this day. I've owned a couple of Jeeps, a couple of Dodges, and even a couple of Chryslers, ans and I've loved every single one. I still remember the first Prowler, Crossfire, and Viper I drove as a service writer. Chrysler Corp was always the company that was willing to do something different. Very concerned about the current direction though. Ditching the HEMI has me pondering a Toyota to replace my current RAM with I love dearly but is creeping up on 12 years old.
Brilliant! 👏👌 Been wondering about how other products compare as I work with adhesives. The AC Delco one should be in its own separate range of tests for that technology ie: Anaerobic gasket compounds (not with RTV Silicones). Anaerobic will only ever cure when air/oxygen is excluded between two "active" metal surfaces, hence why it was completely uncured with the plastic. More active metals will cure faster and to higher shear strength than the inactive ones. That could be another video!!?? 😉
A helpful hint: I had a rusty gas tank in a truck dripping bad. I put a sheetrock screw in hole and coated with Permetex Indian head shellac a few times ( on side of highway Emergency repair) . After two coats No leak .. It sets up even with gas leaking ! Amazing old school Indian head shellac Brown sticky stuff .
I'd have loved to see an emergency control with RTV silicone caulking. For me, the pressure and solvent tests were the most informative as they are actually testing the purpose of the gaskets. I wouldn't mind an additional episode testing different solvents against various gasket materials including a selection from here.
I too would be interested in solvent resistance. I rebuild carbs and fuel pumps and have always used Elring Curil T or T2. Elring is a German brand. I live in the U.K. I’m not looking for high pressure but longevity a seal that will last for years, quite hard to test but after a week or a month I’m sure it would have failed if it was going to when in constant presence of fuel ie gasoline (in the U.K. it’s know as petrol or its full name petroleum)
Worked at a diesel shop part time. They used clear silicone for everything, the kind in a caulk tube. It was super cheap and supposedly good to 500 degrees
great video, although i really like it when you occasionally include a product outside of the lineup for context. In this occasion including something like silicone caulking, JB Weld Original Epoxy, or a more traditional gasket material could have been very interesting.
I think the AC Delco is supposed to work as a flange sealant similar to Loctite 518. It's an anaerobic sealant while RTV is an aerobic sealant. It is for metal flange surfaces and it is supposed to be applied a bit thinner and fill small gaps. I could be wrong, but that's what it looks like to me. Googling it provided little information, but I'm sure the GM service manual calls for specific use cases.
@@Kbl-pu2sc That would probably be an appropriate application. I know for example the NV4500 transmission for Chevy/Dodge used to call for anaerobic sealant on the input shaft tower, steel to steel surfaces with tight tolerance, but later switched to RTV.
Yeah anaerobic sealants are extremely good in their use cases, but none of the tests he did were appropriate for it. It won't harden on plastic at all and the sheet metal pieces are not flat enough. You'd need a milled or ideally a grinded sealing surface on an alloy or cast iron flange (like an engine cover) to see it perform as it is meant to.
OMG! Great testing! I'm no mechanic but I have always used permatex products for water pumps, intakes etc. I can honestly say, I've never had a problem. I hope they haven't changed anything. Thanks for doing this video!
I’ve always used permatex ultra-black for everything literally everything and it’s never let me down. I always buy it in the caulk gun tube. Thanks as always for another good one!
I love how much though, effort, and transparency goes into all of your videos. Your channel is one of my favorites and it’s always fun seeing what you test next. I would be interested to see a video on new vs remanufactured automotive parts. Maybe a couple different types of parts typically remanufactured and see how they perform compared to the new version of those parts. A kill test on them would be cool to see if the remanufactured parts fail sooner than the brand new parts.
Great testing as always! I would've used Yamabond 4 instead of 5, as it's much thicker and more similar to the other silicones you tested. It's closer to a paste than a liquid.
Another 1st Class video, just chalked full of valuable information for thousands of viewer's who save money by being able to see testing done the right way, no BS. Thank you for doing this video.
One product you missed, that I use all the time, and works really well, is the Permatex Ultra Black Right Stuff. Idk why, but I've always found Black holds up better than gray or any other color.
Another awesome video. Just for giggles I'd like to see this type of test with sheet gasket materials. (I've made many cereal box gaskets) Cardboard, silicone sheet, cardboard impregnated with rtv, etc. Thanks. And keep up this great work.
Have been using Hondabond ever since I starting doing my own maintenance, have tried similar RTVs and even the Toyota FIPG, have always gone back to Hondabond for important stuff like oilpans and water pumps. Loved this video comparison and was fairly confident the Hondabond would do well. This was a great video idea suggestion and flawless testing execution by Project Farm once again!
Except Hondabond was 8/13 for pressure testing, the only test that matters for sealing pressurized parts. One of the WORST that was tested. Other than that, it was great for bonding PVC to metal...
Great test. Interesting how the strongest “glue” is not necessarily the best sealant. And very interesting how many really need more cure time than instructions say. Thanks for the E10 test! I remember when we used #2 Permatex or Aviation Form-A-Gasket, and it held up to fuels and lubricants, but we used alcohol to clean it off our hands. I steer clear of all gasohol as much as possible. Thanks!👍
@@twistedhillbilly6157 I buy real gas from Farmer’s Supply or another local (Nelson Petroleum) whenever I can. Always run my power equipment and old tractor on alcohol free.
@@lanedexter6303 The only small engines I use anymore are generators and occonsionaly a pressure washer and chainsaw. REAL GAS is not available in CA anywhere as far as I know. I converted all the generators to Propane so no more problems there. I don't have a lot of problems with the 2 strokes probably due to no float bowl and the oil in the gas and the Honda engine on the pressure washer is built a lot better than the China crap but I have had to clean the carb a couple times in 15 years or so.. The Chevy pisses me off because they know about the issue and it's an easy fix but they want me to pay for it. they would rather I HATE GM instead of paying an entry level tech 15 minutes to do the fix....
Best stuff I ever used was International Navistar product designed for sealing diesel oil pans. It had a rubber like texture when cured and it was the hands down best gasket maker I ever used. Around $50 for a tube.
That product was engineered for the international engines branded by ford as power stroke after problems with engine oil foaming it was discovered that when silicone cured the curing byproducts contaminated the engine oil and as power stroke engines use high pressure engine oil to operate the fuel injectors the aerated oil caused problems. The resulting product is commonly called Ford grey.
I've been a Chrysler tech for a short time but I have used the black RTV on a couple of head gasket jobs not adhering to exact application specs, however, I have never had an issue with it. It works great and no leaks.
Astonishing amount of work, outstanding video as always. The only thing I think would also have been revealing is bringing the test assemblies up to engine temperatures to see how it effects performance. I also would to see the Mopar applied outside of directions since it was a far better performer than the JD. Video suggestion/idea I would certainly love to see tested: Best high heat adhesive/sealants/paints. Sure appreciate what you do.
High heat adhesives/sealants for the win.... Exhaust fixes might be one to consider, although they've been reviewed, I don't think a uniform approach or standard for test types across each method has been used.... Kind of like crimping vs soldering connections and what not..🤦♂️
I don't need any tools but i watch all the videos. The way you test them is too entertaining, never missed a video! Very good job! The Best channel for comparison.
My most used among this selection is Hondabond, which is a fantastic sealant. The only one I would put above it, specifically for metal on metal applications (eg timing chain covers, oil pans, etc) would be Honda's "Ultra Flange". When applied correctly on clean, oil free surfaces, it lasts extraordinarily well.
Good test. The Anerobic like the ACDelco is doing just what it's meant to do. It's a non-pressure sealant for cavities that are exposed to oil splashes, drips, etc. We use it on covers for machinery like lathes and mills at work because it seals the oils from leaking, but the covers can still be easily removed for future maintenance. High bond is not desirable in any application where you know you'll be removing the cover in the future.
I think this video, perhaps more so than others, shows why people prefer to see your testing over the company testing. You explain why you're doing a given test, use testing surfaces and apparatus that most everyone can obtain, or at the very least understand, and then test them in a way that either mirrors real world conditions or best demonstrates the ways they will likely fail. The equipment used to test each thing is the same across each test of the various brands, meaning that it's as fair of a playing field as can be made, without removing the real world from the equation. Thank you for your hard work and dedication to finding the answers to questions that so many consumers are asking, and ensuring that the results are as unbiased as can reasonable be.
Hondabond is what I use on just about everything that needs RTV at this point, especially on Honda products. It seals VERY well, and it is also a lot easier to clean up when you have to take something apart that it has been used on. I have used the different formulas of Hondabond, they all work great.
I was surprised that Right Stuff didn’t do better. It’s the only one I’ve been able to use consistently without any oil leaks. I’ve never had good luck with anything else.
These tests, and your testing jigs are awesome. I can tell you put much thought into your videos. The scripts are always well thought out. Great job, Todd!
I’m actually for the very first time surprised that the products were not tested for their intended purposes under real world conditions. What I’m referring to is temperature fluctuations ie heat cycles, freezing temperature to engine operating temperature back and fourth like winter driving conditions etc. also surprised you didn’t test the various colors as they have different properties, but, knowing you Todd, I wouldn’t be surprised for a part two of these tests ; )
I've been swearing by Hondabond for years, It's always thought it was way better than prematex. Now I'll give Mopar a shot because of its additional resistance to fuel. Fuel shouldn't be in your oil, but hey, stuff happens. Thanks!
@lvsurfcat8584 no kidding.. what's up with all this oil dilution issues, all of a sudden... especially with the Japanese, they seem to have a handle on their engine technologies... hmmm. Especially Honda.. I think it's low resistance ring sets,I betcha...
Thanks for the consistent amazing content. I really appreciate the thorough and in depth testing for every product. At my shop we use permatex right stuff and it seems to hold pretty well. I've heard rumors that honda bond is amazing, and there it is top 3 on your ranking. Interesting to see car manufacturers rtv being put to the test and perform so well. If you make a part 2 use hyundai rtv I'm interested to see how that holds up as I used to work there.
Great test, would you be able to revisit this and do a test as if you're using this for an intake manifold. Usually we put a tall bead of this on the china walls of the engine block then place the intake on top of it. Sometimes we also put some rtv around the water jackets as well. I wonder which one is more resistant to antifreeze. Thank you!
I'm curious how they would perform after a few heat cycles. I don't consider the stuff dry untill running the vehicle a few times personally. Also i'd like to see chemical resistance against DEF, antifreeze, transmission fluid, gear oil. I've mostly used Versachem or Permatex black over the years. Sometimes i'll use the red stuff for higher heat areas.
Great video as usual..while most of the time I find I'm already using the products that come out on top, in this case I'm usually using Ultra Grey/Black. I was planning to use The Right Stuff for some upcoming work, but now it'll be Mopar
This is an awesome video and even applies to my job. Love the stuff you do. Would be excited to see more brand of sealant test like a companion of the three different motorcraft types TA-30 TA-31 AND TA-357.
I appreciate all of the effort and time was put into these tests. I would think the important test is the pressure test. As another viewer stated, AC Delco has a variety of RTV and they are for specific uses. The AC Delco grey would have been a better choice for testing. I am impressed with the Mopar.
I agree…I wish you would revisit this test using the grey. Maybe run through heat and cool cycles to allow time to fully cure each before you perform the stress tests. AC Delco grey RTV has high reviews on Amazon
THANK YOU I'm sold knowing that some fail with from new gasoline is a giant problem! I would have never guessed silicone would fail from the alcohol in the fuel
Thanks for another great video! I'm posting this here because it was mentioned in a thread and most everyone in that thread just wants to argue. It would be good to run a test(s) on some parts after a number of heating and cooling cycles. From about 20* F to about 250* F should be a pretty good spectrum of normal engine temperatures. It doesn't matter if a product is supposed to or requires any heating or cooling. The fact is that engines DO heat and cool. I know that there is 'simulated' testing but that's a simulation. It's like when there is a commercial for a new roofing product (just a random example) and they advertise that it is great for 30 years. Well maybe it is, maybe it isn't. Yes, they did some simulated testing but it is that: Simulated. Until the product has been outside, on a roof for THIRTY YEARS, it is all just an educated guess... Ya'll Take Care and be safe, John
great video but in ac delco's defence, you used anarobic sealerwhich is what we use for differential sealant where pressure and tinsel strength really isn't an issue, it's not made for that, would love to see a show down with manufactures sealant's and gm's gms sealant instead of the anarobic sealant.
Priceless! Great idea to test these. I always use the right stuff and would've never considered the Mopar! I wonder if there will be a shortage on Mopar sealant now? 😆
I love watching your oil tests. I'm curious if the virtues of one oil brand are consistent across its range of available viscosities, or if (for example) Shell focuses on its Rotella 15w-40 and Mobil1 on its 5w30, while neglecting their respective less-popular offerings.