Best Smart Buttons for Home Assistant (WATCH before you BUY!)

Подписаться 36 тыс.

Просмотров 102 тыс.

50% 1

In this video I review ten different smart buttons and remotes that work with #HomeAssistant using Zigbee Home Automation (ZHA). I tested each #smartbutton and compare them, so you can decide which one is right for your #smarthome. Thanks for watching! I hope this review helps you out when buying these devices!
-- Products in this video --
Sonoff Zigbee Smart Switch: amzn.to/3GFH3wy
Aetotec NanoMote Quad: amzn.to/396CAmD
Aqara Wireless Mini Switch: amzn.to/3hzdRvL
IKEA Trådfri Remote: amzn.to/2XgDcDF
Hank Z-Wave 4-Button Scene Controller: amzn.to/2YLAcQb
Fibaro "The Button": amzn.to/3kcYj2J
MOES (Tuya) 4-Gang Scene Switch: amzn.to/44iRf9p
Shelly Button1: shelly.cloud/products/shelly-...
SmartThings (Aeotec) Button: amzn.to/3EakQF8
Linkind 5-Key Smart Tap Switch: amzn.to/3AeIKNn
-- The Stuff behind me --
Desk Glow Lamp: amzn.to/3GlfAAB
Desk Architect's Lamp: amzn.to/3ihPdUf
Monitors: amzn.to/3ZgN63r
Monitor Mounts: amzn.to/3vN1z9M
Mouse: amzn.to/3It7595
Keyboard: amzn.to/3ik7jon
Desk Microphone: amzn.to/3IwCYxz
Studio Headphones: amzn.to/3WVnffR
Under-Cabinet Speakers: amzn.to/3IxkHQP
Camera: amzn.to/3imNq04
Desk Backlighting Strip: amzn.to/3vJvLCX
Desk Backlighting Controller: www.athom.tech/blank-1/wled-h...
Desk Backlighting Power Supply: amzn.to/3IwduAD
-Desk Build-
Desk Board: amzn.to/3CwFbFy
Desk Brackets: amzn.to/3GJHDeh
Wall Screws: amzn.to/3QmS8au
Desktop Screws: amzn.to/3itganL
-- Filming setup --
Camera: amzn.to/3jOsb7C
Charger/Batteries: amzn.to/3k0fVRr
Camera Stand: amzn.to/3XifZux
Microphone: amzn.to/3WRpYXV
Monitor: amzn.to/3vMcnoB
Key Light: amzn.to/3WTJkvo
----
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
-- Blueprints --
NanoMote Quad:
community.home-assistant.io/t...
Aqara:
community.home-assistant.io/t...
IKEA:
community.home-assistant.io/t...
Hank:
community.home-assistant.io/t...
Fibaro:
community.home-assistant.io/t...
Tuya (Github Pull Request):
github.com/zigpy/zha-device-h...
Sonoff:
community.home-assistant.io/t...
Shelly:
community.home-assistant.io/t...
Linkind
community.home-assistant.io/t...
----
Join this channel to get access to perks:
/ @makeitworktech
Buy Me a Coffee if you want:
www.buymeacoffee.com/makeitwo...
Written Version:
www.makeitwork-tech.com/best-...
----
Chapters:
00:00 Intro
01:24 Sonoff
02:34 Aqara
04:08 SmartThings Button
05:01 Shelly Button1
07:21 Fibaro "The Button"
09:04 Hank
10:01 Ikea Trådfri
12:13 Aeotec NanoMote Quad
13:48 Tuya 4-Button Zigbee Remote
15:45 Linkind 5-Key Smart Tap Switch
17:30 Buttons I Recommend
18:30 Buttons I Don't
19:09 Thanks for watching!
The socials:
▶FOLLOW on Twitter: / makeitworktech
▶FOLLOW on Instagram: / makeitworktech
▶FOLLOW on Facebook: / makeitworktech
▶FOLLOW on Reddit: / make_itt_work
Intro/Outro Music: MDK - Press Start
• ♪ MDK - Press Start [F...
/ mdkofficialyt

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 252

@makeitworktech 2 года назад

Hi all, thanks for watching! What do you think? Are there some smart buttons that I missed? The written version can be found here: www.makeitwork-tech.com/best-smart-buttons-for-home-assistant-ultimate-review/

@sanderderuiter9240 2 года назад

Have you tried the ikea tradfri 2 button zigbee on/off switch? I have those installed as my main lightswitches in my house, connected to the tradfri hub. When i try to connect them with zigbee2mqtt in home assistant they show up but dont send any status updates...

@makeitworktech 2 года назад

@@sanderderuiter9240 no I have never tried those because I couldn't find them on Amazon. I've only used ZHA, so I'm not familiar with Z2MQTT. Why are you using the hub? You could just go directly to HA with a ZigBee stick, correct?

@sicilian71884 2 года назад

I ordered the aeotec smart things button for my HA setup. I don’t need a smart things hub right?

@makeitworktech 2 года назад

As long as you have a ZigBee USB stick!

@james43307 6 месяцев назад

You missed the now-discontinued Tradfri on/off switch, which I really like. I also think it would’ve been worth highlighting which buttons do or don’t have a double press feature, since buttons that support double press respond slower to single presses, because they have to wait to see if you are going to keep pressing it.

@PetrusB83 Год назад

The "4-gang" button now seems to be natively supported by ZHA! So now it is for sure my favourite multi button device.

@makeitworktech Год назад

Awesome! I'm loving mine for controlling my projector still!

@Saturn2888 Месяц назад

Dude, all these IKEA Zigbee devices have that 4-clicks thing to link. Mine were all the same, and I wasted 3 hours trying to figure it out! Glad you put that in your video!

@makeitworktech Месяц назад

Yeah took me a while to figure out too!

@Magnous06 2 года назад

It’s great to see a device comparison video that’s focused on Home Assistant!

@makeitworktech 2 года назад

Thanks! There will be more!

@robmackenzie2885 2 года назад

Dude, this is the best video out there on this stuff, I can't believe it's not more popular! I think I'm going with the Ikea controller to pair with HA. Gonna order one to try. Thanks!

@makeitworktech 2 года назад

Thanks! That one's my favorite for sure!

@nmkloster 2 года назад

@@makeitworktech A bunch of people (myself included) are having issues with the batteries draining on Ikea buttons. It would be awesome if someone did a video on the issue if they have any insight. Have not found a solution yet :/

@NoRogeR 2 года назад

Pressing the ikea button on the back 4 times unpairs it from any previously paired hubs. Definitely helped me to make a decision, thank you!

@makeitworktech 2 года назад

Ok cool! Glad it helped!

@TheDanJones 2 года назад

I finally switched from the now depreciated Z-Wave integration to Z-Wave JS integration after watching this video. Thankyou for your work on the Blueprint for the Fibaro The Button. When I originally set it up it was a nightmare. I have put off switching as a result of that nightmare, but it was much easier than I thought!

@makeitworktech 2 года назад

Thanks, glad the Fibaro Blueprint helped! Yeah, Z-Wave JS is a breeze, but there is no option to view the network map. I tried to switch to ZwaveJS2MQTT so that I could, but didn't like it as much.

@TheDanJones 2 года назад

@@makeitworktech I only have one ZWave device! It's still pretty expensive in Australia as it was released later here. Most of my devices are ZigBee or wifi.

@makeitworktech 2 года назад

I don't have too many Z-Wave devices either. Zigbee is great, but WiFi can overload your router pretty fast. Most of mine are wifi, but when I got 79 total wifi devices my Nest router was having issues. Zigbee is slowly catching up now followed by Z-Wave. Replacing wifi switches with those

@ukaszherod1549 3 года назад

Great video. I have 2 zigbee buttons (one 4 buttons, one 2 buttons) and i didn’t have any problem with pairing them with zigbee2mqtt, but i have only single and double actions on each button. But still i like them.

@makeitworktech 3 года назад

Cool, what brands are they? I am thinking of trying some of these on Zigbee2MQTT to compare which is easier

@TokyoLibra Год назад

This video was EXACTLY what I needed! Been googling smart buttons and haven't really found any options... was going to give up. Just ordered the ikea and the aqara ones! Can't wait to try them out 😍

@makeitworktech Год назад

Awesome! It's old, but I'm glad it helps!

@TokyoLibra Год назад

@makeitworktech is there newer ones you would recommend above those two?

@TokyoLibra Год назад

Does the ikea button only work with ikea light bulbs? I have wyze bulbs and I use Alexa

@makeitworktech Год назад

I have tried anything else, no

@WPGinfo 3 года назад

Thnx, this was helpful. I am new to smart stuff and this review gave me some useful info on these buttons.

@makeitworktech 3 года назад

I'm glad it helped! There are lots of options out there!

@szpg 2 года назад

You made me laugh at 13:03 , you little... :) Another great video, so much help for building our smart home from scratch. IKEA looks like a good choice.

@makeitworktech 2 года назад

Glad it helped!

@SmartHomeTechPL 5 месяцев назад

@makeitworktech The "tuya" 4gang remote has two modes: dimmer mode switch mode (to have the 12 actions mentioned by you in video) To switch between modes hold buttons 2+4 (about 6 seconds) until light 3 flashes once.

@jayashkumar5941 11 месяцев назад

like the features, setup was difficult for some of my devices (August Door lock, ru-vid.comUgkxhB5YOMNj04GuoAosExygP4cH-dKeb4aB Bose speaker)... but all switches and outlets (5), thermostat, tankless water heater. Unfortunately all I can do is turn on/off Bose. It doesn't support volume or changing channels, but I believe that is due to the particular speaker I have.... Worth getting if you already have other devices to use it with... I don't sit around and ask Alexa questions much so that doesn't really matter to me....

@makeitworktech 11 месяцев назад

It was so bad back then hahaha

@Maaniic 2 года назад

The holding of the pairing button on the IKEA remote is the direct bind pairing that you can use to bind the remote directly to an IKEA bulb without any form of controller/hub. Normal pairing/reset for the remote is to rapidly press 4-5 times. The right and left buttons on the IKEA remote normally switches the color of the bulbs.

@makeitworktech 2 года назад

Interesting! I've never used the IKEA hub

@Maaniic 2 года назад

@@makeitworktech the IKEA hub is ok for a beginner that is going to use IKEA products not much else, personally I found it a little unstable.

@ta1k2t0ny Год назад

@@Maaniic i think he meant "thank you for taking the time to explain it to me"

@GerdSeegemann Год назад

Hi Aron. Thank you so much for the video. I am into HA for a long time and with my newest project (WLED) I ended up in your youtube channel. I like your way of presenting and getting to the point quickly. I am sorry to let you know that the affiliate links don‘t work for me in germany (or at least I have no clue how, for the Hank Z-Wave Plus Button), so I ordered a „TechniSat z-Wave Plus“ instead.

@makeitworktech Год назад

Thank you! Sorry about that! I'll try to figure out how to fix the links

@peterpalupski 8 месяцев назад

Great Video, Thanks for your detailed review! It only left one question open for me, but I know that testing this is time consuming and not trivial: Which button has the longest battery life and is there an option, which can be powered by rechargeable batteries?

@thundergod97 Год назад

Just the type of review I needed...."Everything works with Home Assistant" Picking up 4 of the Aqara buttons, nice and cheap, especially with Prime Day. Just switched from the Docker container to the HAOS VM and looking to make a few dumb devices a bit smarter. Two solutions: First is a dumb light I have mounted on my dad and I's headboards. Simple clip on lights that work well, but lose all settings when you disconnect power. Replacing them with Govee LED Strips (M1) and a couple of these Aqara buttons. My dad has dementia, and is sometimes confused even by the relatively simple remote for the light. It has power on/off, light color, and two brightness level buttons. For him, just planning to make it on and off with preset settings. Both of these strips will serve as the most used room light, since, when we moved into this house, the main room light switch got put behind the door when we swapped out sliding doors for hinged doors. Have other plans for smart things involving that lighting, but this is a start. Second is a set of dumb buttons that have a hub that plugs into the wall. The hub is in my office, the two buttons are in the Living Room and my Dad's Bedroom. He currently uses them to get my attention and have been the best and easiest for him. Putting one of the buttons in the same spots, as well as the bathroom. It's a simple "I need assistance in some way". It's not really an emergency button, though it can be used like that, but primarily to get my attention for every day things. I've tried many things for him to use in this way, and these dumb buttons are the only thing he has learned how to use consistently.

@makeitworktech Год назад

Sounds like some great uses for smart buttons! I love that they aren't just for "fun" but can be useful as well!

@Leonvolt28 2 года назад

I'm using a nodemcu with esphome and 3 push buttons attracted to it for my lights and other things. Always works instantly.

@makeitworktech 2 года назад

Sweet! I still have yet to try out ESPHome!

@DroidZombie 2 года назад

This was amazing thanks!

@makeitworktech 2 года назад

Thanks, I'm glad you liked it!

@BeardedTinker 3 года назад

Great video. I would recommend you try aqara round button. Whole upper surface is button so you just smash it. Love those for individual room lights.

@makeitworktech 3 года назад

That means a lot, thanks! I'll have to check that one out 🤓 I already saw another one I want to test too. Maybe a part 2 someday

@oudoulj 2 года назад

@BeardedTinker Do you have a reference for that "aqara round button" ?

@BeardedTinker 2 года назад

@@oudoulj it's this part number Xiaomi WXKG01LM - hope it helps.

@dubyaelle5533 8 месяцев назад

IKEA tip big help!

@makeitworktech 8 месяцев назад

Wow, thanks Will!! Glad it was a help

@CosmicGorilla 2 года назад

What a fantastic video, you are a star!

@makeitworktech 2 года назад

Thank you! 😃

@CosmicGorilla 2 года назад

@@makeitworktech I’m trying to plan a home automation system for my new home this has been very helpful.

@SmartHomeMakers 3 года назад

Great video buddy! I want to buy a bunch of smart buttons too now:)

@makeitworktech 3 года назад

Thanks dude! Lots to choose from! I need to look at sensors next 😎

@alastairgreen232 10 месяцев назад

Great job Erin you rockstar!

@alastairgreen232 10 месяцев назад

Oh you too Aaron!

@makeitworktech 10 месяцев назад

Gee, thanks! :-D

@Tmcmaster 2 года назад

Nice video! I bought the aqara buttons and im glad that i have done that after watching this video. I have another question to you. Do you use zigbee and zwave simultaneously? Where do you use zigbee and what devices and what for zwave? I have many zigbee devices and gonna move in 1 year to my new home. There i will probably implement zwave because its more reliable i think. Can you agree with that? Keep up the good work!

@makeitworktech 2 года назад

I'm glad this video helped, thanks! As far as the difference between the two, I haven't noticed a huge difference. I do have one Zigbee device that drops out, but I don't have any Zigbee repeaters. Because Z-Wave is a lower frequency it should pass through walls more reliably. I also understand that Z-Wave has better security options. Either way, I've had fewer issues with my Z-Wave devices than Zigbee. Sorry I can't be of more help. I'd recommend this video if you are looking at which to choose: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v8-VNIQQiQE.html

@DeclanShanaghy 3 месяца назад

I too love the look and feel and features of the Ikea button and I have many of them. But it always takes at least 3 (sometimes up to 7) clicks to wake them up when it has been idle for a while. Has anyone else experienced this and know a fix?

@PoisonWaffle3 2 года назад

Thanks for the great video! I noticed that you didn't mention many unique mounting options on these. How many of these buttons can attach magnetically? I have a handful of Samsung SmartThings buttons and the strong magnet on the back is one of my favorite features. I've got one stuck to the fridge, and a few even stuck to the wall plate screws on light switches.

@makeitworktech 2 года назад

They were all very standard mounting! I actually didn't test them all for magnetic mount, but none of them were advertised that way

@PoisonWaffle3 2 года назад

@@makeitworktech I wasn't aware of the SmartThings buttons being magnetic until I set one down on top of my washing machine and noticed the resistance when picking it up. Definitely was not an advertised feature, but is one of my favorite features. I'm curious how many of the other buttons have magnets. Would you want to test this quick and leave a note in the video description of which ones are (aside from the ones with magnetic mounts that you mentioned in the video)? Thanks!

@makeitworktech 2 года назад

Tested and none of them have that capability beside the SmartThings sensor

@adiands850 3 месяца назад

Thanks for the great video. I just got the Smartthings Button (now marketed at the Aeotec Samjin Button). I have to say I am disappointed at the build quality / design, because the button rattles at the slightest touch and it feels cheaply made. For almost $30, I expected better build quality. I wonder if other people have the same issue?

@makeitworktech 3 месяца назад

Maybe things changed from Samsung to Aeotec?

@Raymond.Jansen 2 года назад

The 4 button switch works fine with ZigBee2Mqtt, al 12 functions.

@yuvalmadmoni5670 2 года назад

Thanks for the great video!!! Does the Ikea button works directly with amazon echo 4 as a hub?

@makeitworktech 2 года назад

Thanks!! Not sure, sorry about that, I don't have an echo 4 to test.

@naronaroyan323 Месяц назад

Can you see if there is any that has a microphone and speaker on the button that works locally? It would be nice as a emergency button and even like a walky-talky type of thing.

@makeitworktech Месяц назад

None sorry

@kjell-ivarpettersen7805 Год назад

Hi! Loved this 😎 But can you make a "how to" on using aqara mini switch without a hub? I'm new to HA and i would really love to get a tiny button to controll lights.. best regards from the cold north : Norway 😃

@makeitworktech Год назад

Hmmm, what do you mean, without a hub? Without an Aqara hub, or without a Zigbee coordinator? Brrrrrrrrrr, stay warm! :-D

@ChaosNLD Год назад

@@makeitworktech You said it just works in HA. You're not being clear about anything else needed. You just tell us you need HA and the Aqara Switch...

@PatrickBulteel 2 года назад

With the Aqara button you can also "shake it" as an action. Single-click, double-click, long click and shake ...

@makeitworktech 2 года назад

Interesting! That isn't advertised, at least, not on Amazon! I'll have to try listening for zha_event and shake it to see if HA picks it up! Thanks for the tip

@sm24572 2 года назад

Not every Aqara Switch mini can do that. Aqara has two versions of mini switch, one with Gyroscope and one without it. So, if your product is not advertised as "gyro" it will not have the shake feature.

@PersonXes Год назад

This is a very solid review. Thanks a lot. Have you tested (or are you planning to test) some Bluetooth buttons/remotes as well now that home assistant has drastically improved its BLE integration? It is slightly confusing when you say blueprints are needed to use this buttons as everyone can make their own automations if they want (and I guess most do) either using the built in automation feature in home assistant or using e.g. Node Red.

@makeitworktech Год назад

Thanks! I may do a round 2, and I'll include BT buttons if I do! Yeah, when I did this video I was still learning a lot about HA. Thanks for the feedback!

@PersonXes Год назад

@@makeitworktech I've been very deep I to home assistant for a couple of years now and am also still learning a lot :-) Looking forward to that video if you decide to make it 😜

@craigiedema1707 2 года назад

The Ikea Dimmer is a good button also.

@makeitworktech 2 года назад

I'll check it out! Thanks!

@leftblank 2 года назад

Hey, I'm just getting into HA and this video was great, Thank you I have a question, do you know why all buttons can't have actions for double, tripple 4x 5x presses? Surely its just code to read sequential single presses right? Maybe that could be a good video topic? Feels like something the HA devs should make if its not already a thing

@makeitworktech 2 года назад

Thanks! I think it's a little more complicated than sequential presses. The device firmware sends different ZHA events based on the number of presses, button held, etc. I don't think you can change what events are sent unless you can modify the firmware, but I could be wrong.

@leftblank 2 года назад

@@makeitworktech Oh i didn't realse that, I thought it was just sending "button pressed" and the software was doing the counting, If it is sending pressed 1, pressed 2 then what each switch sends when you press it 3 times in a row? maybe back to pressed 1. so HA could in theory do its own event reading and say "button pressed 3 times in x secconds" = tripple press. That however would be something the HA devs would need to implement but if true could really enable lots more options for everyone!

@roblowe2987 2 года назад

I wish I'd seen this before I bought the Tuya switch. I've been fighting it for weeks.

@makeitworktech 2 года назад

Sorry to hear that! Yeah Tuya is a pain because they don't follow Zigbee protocol too closely. Apparently the ZHA devs get annoyed with them

@wartlme 2 месяца назад

I got some Ikea zigbee devices, they do not connect. Must be Zigbee 1.2, not 3.0. wish it would work. I have several items from Ikea and I like how they feel and they use AAA batteries.

@luisinigo5572 2 года назад

Useful ranking! Have you tested Ikea Tradfri Shortcut Button? Is it Home Assistant compatible via ZHA? Saludos!

@makeitworktech 2 года назад

Thanks! I believe it is compatible, but I couldn't get my hands on one so I couldn't test it

@jantoresandvik 2 года назад

13:04 Thank you very much!

@makeitworktech 2 года назад

Got ya

@nataliegrn17 Год назад

Excellent video. Is there a button you can pair directly to Android without an app, hub, etc?

@makeitworktech Год назад

Thanks! Not that I know of, sorry

@tibbified 2 года назад

I really like that big four button. To bad it sounds so difficult to install.

@makeitworktech 2 года назад

Yeah it's too bad! It may work better with Zigbee2MQTT... I'm not sure

@joshnlevinson Год назад

Awesome review, as usual! It seems like the Ikea Tradfri remote is no longer available, at least in Canada. It seems like the Styrbar is its replacement in the Ikea ecosystem. Does anyone know if the Styrbar works with Home Assistant (and how well)?

@makeitworktech Год назад

Thanks! Ah that's a bummer. I'll have to try and get one and see how I like it!

@joshnlevinson Год назад

@@makeitworktech please keep us posted!

@meeDamian 2 года назад

The 2nd button (aqara) also has a shake action. I know, because I have like 5 of them.

@makeitworktech 2 года назад

Hmmm, I'll have to check mine out! Thanks!

@sanderderuiter9240 2 года назад

@makeitworktech 2 года назад

I have not tried them! I couldn't find them on Amazon when making the video. I have seen other people use them, so it should be possible, but maybe not with zigbee2mqtt? I have no experience with any zigbee integration other than ZHA, wish I could help!

@kevinsluder9145 Год назад

So which would you use as an emergency button? The fibaro button looked like one the most but idk if it's the most reliable and I obviously want to make sure before I put an actual emergency button in my house.

@makeitworktech 9 месяцев назад

Fibaro would be easiest to press, but not sure as far as most reliable. The NanoMote Quad is the best to me in terms of reliability, but they don't sell it anymore

@user-mfsc-2024 Год назад

isnt for those use Zigbee comm which required a zigbee hub to communicate with the smart button ?

@makeitworktech Год назад

Yes!

@ModelRailroadTechniques Год назад

I love my Ikea button. It goes through batteries quickly though. Do you find this??

@makeitworktech Год назад

Yeah I notice that too. I may add it to Z2M and see if it's better. It also depends on what brand batteries you get...

@jeffs.2752 2 года назад

hey there I purchased the aqara mini switch and the conbee II. I have the conbee up and running with ZHA but can't seem to pair the switch. I go into ZHA and add device and put the switch in pairing mode (hold little microbutton till rapid flashing) and it never finds it. I suspect I missing a step. Any ideas? Thanks.

@makeitworktech 2 года назад

Make sure you have a USB extender to keep that conbee away from your HA device! If your HA device uses USB 3.0 ports that can interfere with ZigBee comms. With Aqara devices, I find a lot of times you gotta just rapidly press the little button until HA finds it

@samuelgomez974 2 года назад

Un fairly new to smart home and for now I’m just using Alexa, could I use the zigbees switches for anything Alexa related? I’m using an Echo 4 so I guess it could be pires as it is a zigbee hub, am I correct?

@makeitworktech 2 года назад

While the Echo can work as a ZigBee hub, this doesn't guarantee compatibility.with these buttons. You'd need to look into whether or not they work with it..alternatively, you could get the corresponding hub for some devices

@Ronaaronhunt Год назад

Good video. Would be nice to do a part 2 comparing the Flic and similar to these.

@makeitworktech Год назад

Thanks! Yeah, there are enough smart buttons to a do a part 2 for sure!

@Polar19plays 5 месяцев назад

Tuya 4- button zigbee remote

@testi58 4 месяца назад

I have a small cab company and we'd like to know if it's possible to put a smart button at hotel reception so that it can place orders when the receptionist presses it? We're going to have a web booker on our website and we'd like to find a solution to make ordering even simpler (for our big customers). For example, the customer presses once, an order is placed. The customer presses 2 times, the last order is cancelled. The customer presses longtems, the webbooker opens on the PC and the customer is connected to his account. Can you tell us if this is possible (with Make or Zapier)? If so, do you know of a smart button with a USB port ?

@makeitworktech 3 месяца назад

I haven't used Make or Zapier, so I'm not sure, sorry

@canadrian 5 месяцев назад

What about smart buttons that can replace light switches? I used to use the Lutron Zigbee Connected Bulb Remote with my old Wink hub, and they still work with Home Assistant. However I've found they're a little unreliable in that they seem to drop off the zigbee network or stop responding sometimes. I also have one Hue remote that mounts like a light switch, but MAN that thing chews through batteries! I think I change the batteries in that Hue remote four times a year. And frankly it might not be much more reliable than the Lutron Zigbee. Are there any other options?

@makeitworktech 5 месяцев назад

Try the Zooz Z-Wave ZEN34! amzn.to/48jnu9i Z-Wave switches have been extremely reliable for me

@richgordon740 Год назад

I've been trying to find a button/switch to just power on/off some alexa-enabled outlets (in this case used for lamps that have no light switch). Preferably no hub, adhesive mounting, and using wifi. Would any of these work?

@makeitworktech Год назад

No, all of these require a hub of some kind, and most aren't WiFi

@trentellis8334 2 года назад

Don't you need some hardware to communicate to Zigbee from HA? Like a Zigbee hub?

@makeitworktech 2 года назад

Yeah, you just need a ZigBee coordinator which is a USB stick/dongle. You can get them for super cheap, but I got a little more expensive one that works as a Z-Wave and ZigBee coordinator. Home Assistant is in itself a hub I guess

@ArmandinhoLara Год назад

I would like to know if there is any button that I could program a routine so that when I press this button a personalized message is sent to my Echo Show

@makeitworktech Год назад

You probably could do that with the ThirdReality smart button that recently came out. amzn.to/3GY544f

@JoshuaNiland 4 месяца назад

Great content...very helpful. Thank you.

@makeitworktech 4 месяца назад

Glad it was helpful!

@isharp32 2 года назад

Any thoughts on the Philips hue buttons. I just got these and I am having some issues (should have watched this video first like the title says) Maybe a blueprint will save the day for me.

@makeitworktech 2 года назад

I usually shy away from Hue, but if they work without the bridge that would be cool! I just did a quick look, and it seems like there's only a deConz blueprint on the exchange (no ZHA). If you're using deConz then you should be good. If not, and if you know how, you could write one. I don't have one of those or I'd give it a shot.

@isharp32 2 года назад

@@makeitworktech as another idea. I love the Flic buttons. But can’t stand the Hub. Not sure if you know of a good way to integrate natively into Home Assistant (on a Linux VM)

@makeitworktech 2 года назад

@@isharp32 I looked into that but couldn't find anything. Really don't want to waste money on the hub but those buttons are 🔥

@adiands850 6 месяцев назад

@@makeitworktech apparently the Hue button now works directly with ZHA without a bridge. According to the Blakadder site. But I'm new to this and still learning, so apologies if I have misunderstood! It would be good if you could review the Hue button sometime to see how it compares with the ones you already tried.

@lehb6282 Год назад

Moes smart button and smart knob have you used them?

@makeitworktech Год назад

No, but I would love to try them at some point!

@NickSLZT 2 года назад

I love aqara devices but for some reason these buttons only show their battery level for me. I am connecting it to the hub M2 though, so maybe thats my problem. Id just hate to have to get another hub.

@makeitworktech 2 года назад

They won't show any entities other than that. If they don't show any device triggers when you go to create an automation, you need a blueprint

@bugthecat6251 2 года назад

Sorry if you've already said this but which of these are alexa routine compatible

@makeitworktech 2 года назад

Sorry, I'm not sure what Zigbee devices work with Alexa.

@grime-cuts Год назад

Did you find any lag issues due to falling asleep (like the shelly button) with any of the zigbee devices? thanks

@makeitworktech Год назад

Nope, just the Shelly!

@grime-cuts Год назад

@@makeitworktech thank you

@drawzeywazig9096 5 месяцев назад

You have an update for this one? Matter & thread?

@makeitworktech 5 месяцев назад

Sorry, I haven't done any research to see what's out there. I'll have to add that to the list since it's been a while!

@perkleinschmidt6798 2 года назад

I love the IKEA but the 🔋drainage is extreme, longest periode was 8 weeks from 100 to Zero and shotes in 10 days...a no go ... using the sonoff bridge ZigBee with tasmota...

@makeitworktech 2 года назад

I hadn't really noticed the battery life drainage, but just checked mine now and the battery status is unavailable... gotta check to see if it died. Which is your favorite?

@perkleinschmidt6798 2 года назад

@@makeitworktech yes that's the issue...a great think when it's >=1% batt but the drainage is a no go. I have a conbee 2 what I will test and see if it's getting better. The forum I can't get a single answer if it's the zha or the sonoff bridge with Tasmota (using latest stable version ). Are you using the sonoff as hub for ZigBee?

@makeitworktech 2 года назад

@@perkleinschmidt6798 I'm using a Nortek ZigBee/Z-Wave stick for my hub. I'll put a new battery in and see how long it goes. I also have a conbee 2 so I could try that on my test HA setup

@perkleinschmidt6798 2 года назад

@@makeitworktech I think I know the reason, the solution not. On my main server I use the sonoff as the brain of the ZigBee with zha. I did setup a 2nd HA with RasPi 4b, dietpi and used here the conbee 2 also over zha and paired a IKEA remote there. Had 100% over a week and whatever reason my RasPi had a bad moment (ext4_fs error) so I had to fix this error. As everything was up and running, started my HA, my IKEA was then in NaN so I pushed one of the button and it was back in system, but then the battery did drop to 47%. I guess my RasPi had this failure in the night between 2 and 10 am and during this time I guess the IKEA did try to connect. I guess his constant trying to come back into the system drain the battery. I don't know this is the real reason but since I had this error with the RasPi and I can also recall same story with my main HA with the sonoff when something in the net or server was not flawless the IKEA remote did drop extremely in those situations... What can be done I'm not sure.

@makeitworktech 2 года назад

Interesting! I just changed my battery a week ago, and I checked mine now and it was NaN, so I pressed a button and it showed up at 87%. I'm thinking of trying mine with deConz on my test setup. I saw some posts where people said it worked fine for them with deConz

@ryantrainor2 2 года назад

I’m using the smart things button and have it connected via the smart thing integration but the only the that show up for entities is battery percentage and temperature. Any thoughts ?

@makeitworktech 2 года назад

Hmmm, I've never connected it via SmartThings, just directly via ZHA. I think that's all that will show up, and you need a blueprint for it to work.

@ryantrainor2 2 года назад

Thanks for the quick reply I will see if a can find one thank you

@makeitworktech 2 года назад

No problem. If that doesn't work, I'd go directly via ZHA unless you really want to keep it connected with ST hub

@travissmith7195 2 года назад

What is your opinion on the flic 2 button? Many influencers say this button is the best. How would you compare it to the aqara? Thanks

@makeitworktech 2 года назад

I've never used one, but needing a hub makes them a hard sell for me. And $30 for a button is high IMO. They have the same number of actions as the Aqara, 1x, 2x, and hold.

@travissmith7195 2 года назад

@@makeitworktech Yes they are expensive. I have one more question. Does the aqara button have a find my phone feature available too?

@makeitworktech 2 года назад

@Travis Smith no, they don't Edit: of course you could probably do that with Home Assistant!

@music4note Год назад

Is there a button where I can use the LED as a status indicator. If wife pushes Button a inside the office, button 2 outside on the door should turn red(or white on next press) Is there one like this?

@makeitworktech Год назад

Not that I know of. I haven't seen any where the button's LED is exposed to HA as an indicator

@newaira333 8 месяцев назад

Maybe look into something like a combination of a smart button and inovelli switch

@zsqduke Год назад

Nearly all of the issues you mentioned can be solved by switching to zigbee2mqtt and no blueprint needed.

@makeitworktech Год назад

Most of these issues no longer exist with ZHA. Z2M is a bit more complicated l, especially for newer folks. I run both, and only use Z2M if ZHA has issues, which is rare

@bennylloyd-willner9667 2 года назад

I'm fairly new to smart home stuff so I may be way off, but using Zigbee requires something "hublike" doesn't it? If an USB dongle or other box is needed for my home WiFi, isn't that in essence fail the "nohub requirement"?

@bennylloyd-willner9667 2 года назад

What I mean is that it is required to buy another box to get started with a Zigbee button. If it's not called "hub" is something my wallet cares nothing about 😁

@makeitworktech 2 года назад

Haha I see what you're saying, and yes, technically a dongle is a hub, but in my opinion, Home Assistant is the hub, the dongle is really just a radio. The devices in this video don't require any other hub than the obvious, Home Assistant. A basic requirement for HA is the hardware, which includes the computer and any radios (wifi, Z-Wave, ZigBee). My "no-hub" requirement just means you don't need any other hardware than the basics.

@bennylloyd-willner9667 2 года назад

@@makeitworktech thanks for a reply, super quick too 😁 I still think that WiFi can be marked as already in tha house, while Zigbee/Z wave hardware isn't in as many houses as WiFi so it'll create an extra cost initially. I'm a nerd so I'll probably implement some Zxxx devices and maybe some BLE stuff on the farm eventually. One dream is to tag our dogs to keep track of they are in their boxes in the house or outside. I'll subscribe and check more of your videos. 👍

@makeitworktech 2 года назад

@@bennylloyd-willner9667 I agree! Once you get Zxxx you forget it's not as common as WiFi haha Sounds awesome! And thanks!

@bryonhulcher851 Год назад

for the aqara button... I still need a zigbee usb dongle for my pi or no ?

@makeitworktech Год назад

Yeah Aqara devices are ZigBee and require a ZigBee radio

@bryonhulcher851 Год назад

@@makeitworktech thanks.. massive noob here lol

@makeitworktech Год назад

Haha I'm not too far from a massive noob myself 🤣

@isaacm6560 Год назад

How can I get the aqara button to work with smartthings?

@makeitworktech Год назад

Not sure, sorry. I bailed on ST a while ago. I'm sure there's a driver for it

@captshadab Год назад

Which buttons can control Alexa routines directly on press

@makeitworktech Год назад

None of them. I think ThirdReality has one that will

@adambod3846 Год назад

Do you have a video for hubitat?

@makeitworktech Год назад

No sorry, but I do have a Hubitat hub and should probably try these with it in the future

@adambod3846 Год назад

@@makeitworktech thanks a lot, can't wait till I see them! Keep it up 👋 you're doing great 👍👍👍

@jerrychambers9649 3 года назад

Nice guide, but the smartthings button is not available

@makeitworktech 3 года назад

Thanks! Yeah they keep going in and out of stock. Have Amazon alert you when they do and you can order one. The Aeotec SmartThings Multipurpose Sensor just came back in stock

@skynetnetworks 2 года назад

Zigbee and zwave is a hub with usb or stand-alone

@makeitworktech 2 года назад

Zigbee and Z-Wave require some sort of coordinator/hub. But none of these buttons require the manufacturers hub, you can just use Home Assistant.

@bennylloyd-willner9667 2 года назад

@@makeitworktech it still needs some extra box. When you stated your requirements it wasn't clear that you only meant "no specific by manufacturer". For me, as new to this it was a bit confusing. You also didn't mention that Shelly stuff can work locally without cloud for no extra cost/hardware which should satisfy the "locals"? It seems you don't like Shelly and/or WiFi connected devices. If so, why? I mean, a WiFi network is already in your home if you're interested in creating a smart home, right? I don't want to sound to negative, I'm just curious and want to learn.

@makeitworktech 2 года назад

Noted, I'll try to make that more clear in the future! I don't have much experience with Shelly, but my experience has been that it's more difficult to add to HA than many of these other devices. I stay away from wifi because they typically require big batteries to handle the constant connection, and also my network is overloaded. I had 80+ devices at one point and my network could feel it. Z-Wave being on a lower frequency is nice. Also, many wifi devices are Tuya based which I try to avoid if I can.

@Daniel-xl8yp 2 года назад

are these buttons compatible with the google home assistend?

@makeitworktech 2 года назад

No, not Google Home!

@m97120 Год назад

You forgot the Flic buttons. They're awesome and don't require a hub. The hub is optional.

@makeitworktech Год назад

Back when I made this video the hub was required. Not sure if they worked via Bluetooth at that point, but I didn't have it set up. The review was specifically for ZigBee, Z-Wave, or wifi buttons

@danielpmo Год назад

Bro, I've liked and subscribed before 30s. You're doing (talking about) what I was looking for, I can see you can do that well enough out of the bat and you're following a nice standard script (that I can identify over other videos) that you're getting to the point quick enough and yet provide long enough content of you to monetise. HOWEVER. FIX YOU'RE audio. Make it premium sounding. It's as important as anything else. There's something weird with your audio I think. Although I'm almost getting used to it by now as I write it. Still it's worth taking a look at it, I think it has something to do with a little bit of echo.

@makeitworktech Год назад

Hey thanks! You're right about the audio, I just haven't had time to figure it out. I try to remove the echo in post, but then it sounds really weird (maybe weird is better haha). The other obvious option is to add some foam paneling to my walls in my office studio, so maybe I'll give that a shot. I really appreciate the feedback though - it's kind of hard just trying to change things and hoping it sounds better!

@oldsklminitrk 2 года назад

I run that tuya 4 button in smarthings ...I get 12 functions...its got s custom setup on ide

@makeitworktech 2 года назад

Do you know what model number it is? They started selling it with a different firmware that doesn't have the 12 functions. Some people get the old firmware, some the new 🤦

@oldsklminitrk 2 года назад

@@makeitworktech I can look...I also ordered it on aliexpress

@oldsklminitrk 2 года назад

@@makeitworktech ESW-OZAA-EU Below that is wireless scene switch 20/48

@makeitworktech 2 года назад

Hmmm couldn't find that model number on Aliexpress

@oldsklminitrk 2 года назад

@@makeitworktech that's the one I got

@DeclanShanaghy 3 месяца назад

Don't understand why all these manufacturers are switching to rechargeable. It's bad enough to need to change batteries but when you do it's done instantly. Taking the button away from it's "home" to charge it is an unwanted extra burden and makes it unavailable to use when it's charging. So dumb.

@DeclanShanaghy 3 месяца назад

OMG, Watching this spurred me back into action to figure out WTF was going on. For some forgotten reason I had my node red state event setup to ignore successive events within 1 millisecond. Turning that off eliminated the problem. Completely 🤯

@waynenocton 2 года назад

Prices have gone insane. No way I’ll pay $45 for a button. Nothing against your video

@makeitworktech 2 года назад

I hear you. A little competition would bring the prices down

@richard_rouzeau 2 года назад

Hi. It's Aaron, right? I was enjoying the video until it got to this part: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B-AKnFAVzsY.html. I'm completely baffled as to why you would make that sign? What were you trying to communicate?

@makeitworktech 2 года назад

That's the "ok" hand symbol, part of the "circle game". Growing up in the 90s that was something we were always doing - trying to get people to look at the circle. If they did, they'd get a punch on the shoulder 😂. If anyone (I mean anyone) tries to insinuate that I'm using that symbol to communicate a racist message subliminally I will delete the comment in a heartbeat. That kind of discussion in the comments is disgusting and spreads hate and the idea that the use of that hand gesture means more than "ok", which it shouldn't. It's also insulting for someone to say that this video I worked so hard on is just a means of communicating a racist message, which is an absurd idea. Please carry on and enjoy the rest of the video! 😁

@richard_rouzeau 2 года назад

@@makeitworktech Most sings and symbols of hate have been hijacked from completely different meanings, including this one. You might want it to still represent the same thing it did in the 90s but it doesn't. From now on, it will always be a poor choice to use it as an OK sign especially in a production that is meant for everybody.

@makeitworktech 2 года назад

That's extremely callow logic, I'm sorry to say. Each individual has the responsibility to interpret my expressions, and the CONTEXT is extremely important. Someone's lack of contextual awareness may make them take the wrong interpretation, but that is a risk I'm willing to take. I won't entertain this discussion any further, but thanks for watching!

@PuppetMasterDK91 2 года назад

Dont update the Ikea 5 button, you will loose the ability to program it.

@makeitworktech 2 года назад

Yeah I read that on Reddit. Why would anyone update it though?

@PuppetMasterDK91 2 года назад

@@makeitworktech yeah, I just thought since I had the option, then why not. Now they are pretty much useless as I cannot access the __init__ file for zha to make a downgrade

@PuppetMasterDK91 2 года назад

Oh yeah I had I power drain issue where the buttons would use a whole new battery in a couple of days

@makeitworktech 2 года назад

Any way to factory reset?