Best Tool Chest Under $1000? Husky 56" 23 Drawer

Подписаться 9 тыс.

Просмотров 64 тыс.

50% 1

I just picked up the Husky 56" 23 drawer heavy duty deep tool chest. Not to be confused with husky's other lines, this chest is their heavier duty line with deeper drawers.
Giveaway Details:
Giveaway has ended. Thank you to all that participated.
Justin Dow US General 56" Review
• US GENERAL 56" SERIES ...
Links:
Husky 56" Chest: www.homedepot....
Kaizen Foam: www.fastcap.co...
Tekton Tools: www.tekton.com
Sunex Impact Set: www.amazon.com...

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 190

@davidgunther1282 2 года назад

This is for anyone looking to purchase this chest…I have the same one and although PK expressed some concern with the center socket drawer perhaps not being strong enough to hold a lot of sockets. Unless you have an insane socket set you’ll probably be fine. I have a 166 piece Craftsman set and it only weighs in at a little over 25lbs. The 308 piece Craftsman set comes in at 44.2 lbs. the sliders are rated at 120lbs and the drawers themselves are made of steel; PK also expressed concerns that there is no center support in the middle of the drawer but honestly the sliders would fail before the drawer itself does. You can almost store 3 of the 308 piece sets in this drawer (if they fit), as you’d only be 12lbs over the limit at that point and that’s a heck of a lot of tools for 1 drawer. Great review, PK and a great tool chest, I just think the concerns about the center socket drawer may be unwarranted. Cheers!

@towboatjeff 3 года назад

I'd love to see a full toolbox tour after you get everything in place.

@ryancarroll8086 3 года назад

Agree with towboatjeff, I have a similar set up and similar tools.

@mrnotnomis 3 года назад

Same - I like the idea of the foam inserts, but I don't think I will have room in mine for that. I have 3 small rollers that I want to condense into a single one.

@RipRoaringGarage 3 года назад

@@mrnotnomis Ive done it with a small Mac Christmas tree setup. Although I upgraded to a big box, so...I get to cut foam for the next month..hurray!

@mobscents4967 2 года назад

Bro I love your videos so much!! You seem like such a humble, chill and down to earth guy and all your videos have been soo informative and helpful. You’ve probably saved me a couple hundred in the your mechanic tool set overview/videos

@jimhein9689 9 месяцев назад

Thanks for your review of your Husky roll away. My wife bought me the 52 inch 15 drawer Husky tool Chest for Christmas. I plan to use a Kaizen Foam Storage and looked at your video about how you accomplished the 1/2 in socket drawer .... very nicely done. Like you indicated, I was kind of taken aback by how shallow the drawers are. I am upgrading from an older Craftsman roll away (30 years old) and of course those drawers are considerably deeper. I am looking forward to seeing how you utilized all of the drawers and perhaps capturing some of your good ideas. Thanks

@charlesfields7908 2 года назад

I have the 52" husky 2016 model its built very similar to yours. I can agree on the big drawer extra slides is needed but i still use mine for all my sockets, extra long extentions and hf 1/2 drive breaker bars (3 total). My sockets is the husky 200 piece set thats usually on the seasonal sale around Christmas time and fathers day sale. The socket drawer handles the weight well and doesnt bow any. Just my exp if you wish to use your socket drawers for heavier items.

@chrisswink636 3 года назад

It's crazy how it's when up $300.00 in 4 months cause I was looking for tool box reviews and you popped up and clicked on your link and seen the price I was like dang it's not under $1000.00 no more lol

@mrnotnomis 3 года назад

I am leaning toward this one also. If I get it, I am going to check to see if a couple of mods might work: First, brace that middle drawer and replace the slides for more capacity. I am thinking some aluminum c-channel across the middle under some foam. I'll also probably replace ALL of the casters with full swivel/lock type, if I can find a matching hole pattern. I am glad to see a video showing this line of Husky. The ones compared in other videos seems to have a lower fit-n-finish than this line, but the prices are about the same. Thanks for the content!

@infusionprosjason 3 года назад

Love the content, keep it coming. Tool reviews, and DIY car mechanic work is always a good choice. Appreciate the time and effort, I know alot more goes into it especially with editing, and everything.

@coreybair9426 3 года назад

I'm not really brand specific either when it comes to tools. As long as it holds up and I feel I get my money worth out of it. I've spent a lot of money on tools over the years and I have to say that Tekton is definitely one brand that I recommend. Keep on doing your thing and make videos on whatever tickles your fancy. Don't be afraid to try something a little outside of your wheelhouse either. You'll never gain wisdom without new experiences.. Good luck👍

@MUCAchik13 3 года назад

Thanks for the extended review and honest thoughts. Subscribed! Can't wait to see your channel grow. Would love to see the tools being put to use on real repairs/builds.

@rossbehr8059 3 года назад

22 year old here with 50% tekton tools, can’t beat em for the price. Love the videos you’re sharing with everyone, a guide on how you cut your Kaizen foam would be awesome! A lot of guides don’t look as clean cut as yours, and I’m hoping to organize with Kaizen foam once I can get my own box.

@projectkarr 3 года назад

Glad you are liking the videos and I’ll get one posted soon on the kaizen foam.

@MadGunner 10 месяцев назад

Audio on this video is lower than normal. Maybe re-post this video with an update for 2023 and remix the audio with more volume? Current price at Big Orange as of November 2023 is ~$1550 for the 23-drawer 56" toolbox, while the 18-drawer 52" runs $800 on sale and $1100 regular price. When on sale, getting two 52" for the price of one 56" is a great deal!

@stgraves260 2 года назад

On your socket draw add a piece of thin plywood. It will distribute the weight to the outside towards the rails. Hope that makes sense.

@mikeobrien2582 3 года назад

Good honest review, liked the good and bad along with compairson with competing box. Let's see it when it's full.

@GeorgeLapachi 3 года назад

Very thorough review! 👍 You are right about the shallow drawers. For the majority of people that will be a deal breaker. The choice of putting the stuff where you want them to be is very limited.

@projectkarr 3 года назад

Totally gonna be a deal breaker for most. If I didn’t have another box for larger things, I would have probably gone a different route.

@theodoremorgan5826 2 года назад

I just bought a Husky 41 inch 15 drawer. Really nice for my space that I have. I too looked at US. General. These are awesome. Thank you for the video. 👍🏼

@kcole2990 3 года назад

Tool boxes are just like the tools you use. You don't need a $7000 tool box. The drawer that is sketchy it just doesn't have the bracing the big brands have. I just got a craftsman 37in chest and top. It does the job and it set me back $560. Its not got the size drawers I would like but it holds everything.

@s0la.scr1ptura 3 года назад

Thanks for showing how you unloaded it because that’ll be my situation soon, and it’s nice to know it’s possible. 👍

@projectkarr 3 года назад

One tip, leave the top box in the bed of the truck and once you assemble the bottom, slide the top box directly out of the truck on to the top of the bottom box. Good luck.

@s0la.scr1ptura 3 года назад

@@projectkarr good to know. Thanks brother!

@RenegadesGarage 2 года назад

Project Karr.. Nice toolbox. My son has one and he loves it.

@brucemillard 3 года назад

Just got this box for a present and love it. Shallow drawers but I'm making it work. I will try and post some pics in the next few weeks

@seandalejackson2525 2 года назад

You nailed it n that center swivel caster. Instantly as maneuverable as the general.

@MHSilion 3 года назад

I have a think for very specific tools, for example, I love my ratcheting screwdriver but it still doesn't fit all I quite want it too and I'm constantly looking for a better one. You could do a video on that or flex head ratchets, or something like that. I appreciate the thought you put behind these and that we can tell you actually use the tools.

@lornecurrie7705 3 года назад

I got lucky with my craftsmen toolbox when I got it. It was “used” so got half off top and bottom right around $850. Would love to see a full tour of your garage set up. Great videos btw.

@victorsalas339 3 года назад

I know justin dow make a review, but it will be amazing to see a long term one on this, like if the slides or the annoyance that the drawers sometime dont open all the way up

@floobertuber 7 месяцев назад

I'm new to your channel and newly subbed. I'm a few years late to this video, but I just picked up a 36"w x 18"d 12-drawer Husky roll cabinet & top hutch combo. It's not a pro box like yours, just the consumer version with 21 gauge steel. But otherwise, it has a lot of design similarities to yours. It was kind of an "unintentional acquisition" that led me to watching lots of videos about Husky boxes. And I've got to say, I enjoyed your insights and heads-up about potential cons. Cheers from Wisconsin, take care.

@Graidian 3 года назад

I'm not sure how I stumbled across your channel, but I really like your style. I went through and completely overhauled my shop a while back, but seeing what you have setup is inspiring me to make so further additions. Great work so far, eager to see what else you have in mind!

@projectkarr 3 года назад

Haha you must have gone through the RU-vid rabbit hole. Glad you enjoyed it.

@STREETFIGHTER50 2 года назад

I’m gonna have to go with the 52”. For me double slides is a must for that wide socket drawer.

@robertortega32 3 года назад

I just ordered my box right now it takes me longer to find my tools than to do a brake job Good review buddy

@shawnsimmons3 2 года назад

Thank you for this video, this is very helpful for me being an automotive tech. I am thinking about getting this box however your comments about the socket drawer and the thin depths of most of the drawers is a large factor for me! I will need to do some thinking and considering

@ufooooooooooooooooo 3 года назад

Really interesting I appreciated the overview on the Tekton sets and just assumed you would have had videos about the Datsun roadster but I’m really surprised the channel is new. The production is great already so seeing the progress would be cool.

@projectkarr 3 года назад

Haha ya I started this channel about a month before having a baby so maybe not the best planning haha. I should have some Datsun content coming in the near future though. Thanks for the comment.

@cjarloz 3 года назад

Id like to see you using your tools on projects. Im getting back into mechanical work after an accident years back. Your reviews are helpful in finding quality tools.

@looseballs1966 2 года назад

I know this is a pretty old video but I have the same Husky boxes and I am a retired auto mechanic and after retiring I got rid of some of my surpluss tools as well as my aging snapon boxes and got yhis husky, that said I use the socket drawer for sockets and have quite a load of them in it because they are all on rails for the most part and range from quarter drive at a mere 3/16ths all the way up to 1-1/2 inch half inch drive (I keep my big 3/4 and 1 inch stuff in the bottom most drawer) and it has no problem and still slides just fine,,,,just don't be leaning on it heavily as your taking tools in and out of it,,,for the price you can't really beat this box.

@yellowmetaldriver1460 Год назад

It turns on a dime if you place the fixed castors in the center and swivels on the 4 outside corners like it was intended. Good vid

@brianrunyon5422 2 года назад

Would like to see how you fill those drawers, in the future I’d like to see your work on that chassis you moved unloading the husky.

@petertwiss356 3 года назад

Good video , thanks for this , I have been debating between this and the US general. I like that you came back and gave more feedback this is a great video finish

@projectkarr 3 года назад

They are both great boxes. I’d say if the hutch is a really big deal then the husky is great but the 52” heavy duty husky might be a little more useful with the drawer sizes. If the hutch isn’t a huge deal then the US General would be awesome and has a nice range of drawer sizes.

@petertwiss356 3 года назад

@@projectkarr thanks!

@boosted2.4_sky 3 года назад

I have the 52" with the magnet back and deeper drawers in the hutch...I paid $698 about 6 years ago...and it is a good looking as the day I bought it...sitting in my garage you don't need more than 18/20 gauge steel....

@projectkarr 3 года назад

Ya the 52” husky is a great box and I really contemplated getting that instead. Glad to know it’s holding up great for you.

@aaronruminski411 3 года назад

I bought a set of tekton sockets after watching your videos. Always love the tool reviews very honest.

@projectkarr 3 года назад

How are you liking the sockets so far? And I appreciate that comment.

@aaronruminski411 3 года назад

I bought the 1/2 inch set and I use it a few times a week. I'm an industrial sheetmetal worker by trade so I am fairly rough on them and I haven't had a problem yet. I recommend them to everyone and you cant beat the price

@aaronruminski411 3 года назад

Also if you need pry bars I recommend any that are made by Wilde tool co. Usa made and a great price and I've never had any break or bend

@projectkarr 3 года назад

That’s awesome to hear and I’m glad you’ve been having great results. I’ll definitely check those out since I’m gonna be needing some pry bars, and sweet that they are made in the USA.

@BBQJOE 3 года назад

I'm waiting for this same tool box to arrive at my store. The shallow drawers will work out fine for me. I would like to see a one year review video when that time comes. Awesome video sir..!

@projectkarr 3 года назад

Congrats on your new box, hope you like it. I’ll definitely do a follow up.

@randyj7665 3 года назад

Great Videos on the toolbox and Tekton tools. I am finally organizing my setup and definitely looking at using the Kaizen Foam. Nice and Clean. I purchased the same box a few months ago and combined 2 small craftsman roll around tool boxes to 1 Husky Box. Couldn't be happier with the price and quality vs other boxes that were close to the same size. Thanks for the videos and for sharing your setup.

@roberte8564 3 года назад

Was considering the US General box, but leaning towards this Husky Chest. Thanks for the review

@michaelpope7642 3 года назад

I bought this tool box last year and love everything about it. Shallow drawers worked well for my storage needs. Odd thing is that my large socket drawer had a centre support slider underneath in the middle... wonder why the difference....

@k81law 3 года назад

I want to hear your thoughts on Gearwrench 84, 90, 120xp ratchets. Keep up the good videos!

@mferrarorace 2 года назад

Thanks for the review. It is disappointing that the drawers are so shallow. That doesn't make sense for most guys working in a home garage.

@tomycodd 2 года назад

I put my sockets on the top shelf and use the socket drawer for my combination wrenches.

@MagicPerformance361 3 года назад

Love tekton stuff have the master chrome in 1/4 drive and 3/8 plan to get the 1/2 master set soon, your content and organization is great keep em coming

@imbrandon16 2 года назад

i have the husky industrial 52 inch and the husky 80 inch with the hutch and side cabinet and a little husky 27 inch tool cabinet, they're all great boxes that i use in an industrial setting.

@gokblok 2 года назад

Really disappointing. I'm very glad to have found this video. I wanted this box for all the same reasons as you, but that full-length drawer is a deal-breaker. Thanks for posting.

@jimc12 3 года назад

Definitely would like to see your compressor build and your blast cabinet. FYI I just watched your Kizan foam install. I have used that stuff before. I have some in my pelican 0450 tool case. It's been in there for 3 years now. The only thing I have noticed is on the heavier items the foam tends to start collapsing after a while. I don't know If some of the South Texas heat has anything to do with it.

@joshuazieran2711 3 года назад

I'd like to see a husky 505-piece mechanic set review. There is not a single one on youtube.

@andy.hanway 3 года назад

I just got the US General 44" top and bottom and side cabinets. I will be filling it up with Tekton tools. It would be cool if you did a review on ratcheting wrenches. I like and appreciate your videos for just keeping it simple.

@ricardosandoval1470 3 года назад

I got the same toolbox back in September 2020. So far it’s worked for me but I would of like deeper drawers.

@coleanderson901 3 года назад

Looks like you got a good start thanks for sharing would like to see the box when you get it completely foamed out

@garysvinyldungeon2764 3 года назад

Love the look of the Husky, but those drawers seam too shallow for my needs. I just purchased a new Craftsman 26 in with the hutch style top. I have 4 now, 3 in my garage and 1 in my basement. Im 68 and have acquired a lot of tools over the years. Some of my craftsman wrenches and sockets are from the 70's.I have got a lot of GEARWRENCH lately, screwdrivers and ratchet wrenches. I would like to see your tool box when you get it all setup.

@projectkarr 3 года назад

Exactly. One point I was trying to make in the video is just because someone likes a certain chest, doesn’t mean it’s the right one for you. Craftsman still makes great chests for home use and the price is great. If I were to pick my favorite tool right now it would have to be my gearwrench flex head ratcheting wrenches. They make great tools and those wrenches are probably used more than anything in my garage.

@samueldouthit8804 3 года назад

Love to see tool reviews, I've decided to commit to American made tools so I'd love to see reviews on any American made stuff

@kcole2990 3 года назад

That power bar and light is sweet

@zacharygay7598 3 года назад

Hey bro I have started watching your channel lately and I love your tool reviews! You’re the reason I’ve started looking into tekton tools! Keep up the good work!

@projectkarr 3 года назад

That’s awesome to hear. Thanks for the feedback.

@ivanushka1646 3 года назад

I just started to get into tekton and I got myself the big 46 peice wrench set you mentioned before. Thanks for the recommendation 😀

@projectkarr 3 года назад

That’s awesome, hope you like them.

@quiksol 3 года назад

love the tekton tool reviews, my wallet doesnt appreciate it, but i do. First day viewing your content, I would like to see some of the car project work.

@freshwaterexperience6058 3 года назад

The foam is so sick! Whenever I get a toolbox I’m gonna have to steal this idea😂

@rogerhassell3212 3 года назад

This is a good video, and I've subscribed. Good content and insights. My main suggestion to improve the technical quality is to get a wireless mic if you haven't already. It will really step up the audio quality and volume. Regardless, I'm looking forward to watching more of your videos!

@RipRoaringGarage 3 года назад

Congrats on your purchase. Its a nice looking box, although I wont lie. Im not a fan of the budget boxes. It seems fairly weak underneat it, but for me, the drawers and the feel just drives me nuts. I worked with Snapon boxes in the military and have had a Mac setup at home, as a handmedown. I just bought a Matco for under 2k. Its a 57 or 59 inch, 2 bay with a hutch and a few other goodies. Did you consider a used box? I know that new is new and I had to powerwash my box, and take it ALL apart, and then regrease it (oh, thats gonna upset people with how I grease the rails LOL, but if its good enough for aviation, its good enough for my cars and buses.)

@wolleysegap9740 2 года назад

Nice box, I like the layout of the draws. I'm a fan of the shallow draws, but I'd have to pass because of the socket draw. There's no way it would hold the weight of all my sockets.

@FinallyMe78 3 года назад

Great review. I agree with your points. The socket drawer is what led me to get the US General.

@cortezaz 3 года назад

I am us general 72” w/o the top chest cause I use it as a huge cart and work station. I like your soft close feature though👍

@gregserna963 3 года назад

1st of all a BIG CONGRATULATIONS on the newborn, that's what life is about, simply Awesome!!! I subbed and enjoy your channel, I look forward to more of your content soon, I'm planning on yet another box 4 my garage?? I have an old Craftsman & a very expensive Snap-on, and Obviously need more room now, not sure on what brand as of yet? Any suggestions on what 52" or 56" 2-purchase, that is my dilemma 🤔

@projectkarr 3 года назад

Thanks a lot. It has definitely been life changing and amazing. It’s a tough decision since there are so many options. For me it comes down to the price range you are looking in. The husky industrial 52” box is great but not as deep as others. The US General 56” is also a very stout box and has great versatility with the drawer sizes. Plus you can add on to the US General over time. If you step up to the next price level then Homak makes some awesome boxes and Tekton’s new line of boxes seem really nice but I don’t have experience with them. Obviously there’s tons of other options, those are just some that I think you get the most bang for you buck.

@marcwerth1857 3 года назад

Love the toolbox. How about a review six months to a year later and how you like or dislike things about the box

@backtoback2215 3 года назад

Great review of the tool chest, thanks for sharing. I'd be interested in hearing your review/take on your Tekton tools, as I'm looking to purchase some to replace my old mish-mash of random ones I've been given over the years.

@cearof 3 года назад

I would like to see more building. Especially DIY on furniture. Thank you

@scottmorris4914 3 года назад

Would like to see a review of their cabinets, in terms of different levels, home, heavy duty, industrial. Am actually looking at cabinets now.

@alexibreau6340 3 года назад

I think it would great to see garage organization tips.

@maggiedonovan 3 года назад

I'd like to see some more comparisons to truck tools

@victorcoss2600 6 месяцев назад

Under $1,000? I wish. It's like $1,600 now from Home Depot. The drawers do look pretty slim. I do IT work so this box might be a good fit for it but I will now measure some of my tools and parts and see if it will work out. The socket drawer I'll probably make my screwdriver and bit set drawer.

@johngibson3594 3 года назад

You should have mounted the casters and then slide top box onto it from truck bed then you wouldn’t have to lift top box much. I liked that box too. I liked the drawer layout

@projectkarr 3 года назад

....well now I just feel dumb. That would have been way easier.

@johngibson3594 3 года назад

Most times the easiest things are sometimes overlooked. Put a couple heavy 🧲 magnets in the glove box when u open them and you don’t need to buy a glove holder. Also u can get magnetic sheets that cover your heat or ac register and put stickers and label tape with what’s in each drawer that way of someone comes to help you and fetch tools they can find them. Some of the stickers are hard to come by and if they are on the magnetic sheet you can move them anywhere and if you replace your tool box down the road you can move them to the new one. I love the look of the foam but if you change the layout it can get expensive or look worse. Most guys at home can get away with the foam. I put all my sockets on the top and on a board at a slight angle. I have the first gen 52 inch husky which has no added features to it. If u like tool box tours I have over 1000 on a playlist on my channel. I see lots of great things on them and yess I have watched all of them. Some are missing if they have been deleted by the owner.

@edwarddavis507 3 года назад

I like how you sorted out the caster arrangement. I will go with your caster arrangement when I upgrade. I like the shallow drawers too. I would give the socket drawer a closer look. Is it heavier gauge steel? Anyway, very nice!

@calebclinton5334 3 года назад

Nice looking setup. I'd like to see a before and after on your blast cabinet

@jtpeel1055 3 года назад

Just bought the 375$ tekton set you reviewed, would like to see some comparison videos with them vs others or some torture testing stuff with them.

@timknevels9650 3 года назад

I'd like to see a review on your husky box after it's full

@eddieabernathy5998 2 года назад

Great review. I really want to get into the tekton tool line. Keep up the good work.🛠

@steveaquires8467 3 года назад

Nice box,I'd reinforce the socket drawer

@gremlin7599 2 года назад

I have a lot of 1/2in impact sockets and a good amount of 3/4 impact too. And i want to get more. I was really close to buying this but i dont know where im gonna keep all my sockets in that. Great video, thanks

@projectkarr 2 года назад

Ya I personally wouldn’t recommend this chest if you have all those impact sockets. I wouldn’t trust the drawer to hold it. The US General 56” chest has double slides on the socket drawer and seems very strong.

@DCecil07 2 года назад

Just wanted to get your 14 month follow up. Are you still liking it, finish still good, etc? I'm waiting for the Matte Blue to become available and with it being $1300 now, wanted to make sure I make a good purchase. Thanks man!

@petereverest2736 3 года назад

I do not see why some people with snap-on boxes look down on others. This looks to be a very good & strong box

@projectkarr 3 года назад

Ya I mean snap-on makes amazing boxes and I would love to have one. But like you said, I don’t understand why there is so much hate towards people not buying what you think they should buy. I’m just glad we have so many quality options to choose from.

@cheezuscrust7730 3 года назад

@@projectkarr no one at my shop cares about what tool box someone has.

@visargent1366 3 года назад

Count me in thanks for ur time great videos. I love every thing about this tool box

@ragincajungarage 3 года назад

I have the husky 46 inch workbench 9 drawer its a great box so far

@SmokinBuddha 2 месяца назад

If this tool chest combo was under $1000 today I would buy one, but the price at Home Depot is $1548 before taxes. I bought the Husky 52" version for $899 before taxes and I should get it on Saturday.

@projectkarr 2 месяца назад

@@SmokinBuddha yes it’s very unfortunate. Honestly if I were to buy a box today it would be that husky 52”. The drawers are a little deeper and give you a lot more versatility. Hope you end up liking it

@davidwerth5508 3 года назад

I'd like to see a comparison between kobalt and Husky tools

@towboatjeff 3 года назад

That's what I dont like about husky toolboxes is that wide top socket drawer not having 2 sets of slides and extra support I have 2 of the 46" husky 9 drawer boxes with the wood workbench tops that I'm planning on selling and upgrading to a us general.

@projectkarr 3 года назад

Ya I just couldn’t believe that they have a 56” chest without at least a center brace in the socket drawer. I mean even the 52” has a center brace. Huge design flaw.

@bryangrim6021 3 года назад

Thanks for showing this. Been looking at this box for a while. I’d like to see the sand blasting setup as it’s something I’ve always wanted to get into but just haven’t had much space yet. Also, and I know this may sound dumb, but I’m not familiar with the foam product for the drawers. If you could elaborate on that it’d be cool. Thanks! 👍

@projectkarr 3 года назад

It’s really a great box, but definitely not for everyone. I’ll see if I can put together something soon on the blasting setup. And not a dumb question at all. It’s kaizen foam which has layers so you can cut through and peel them out. I got it from FastCap.com and I’ll add a link in the description. I’ll also try to put together a video when I cut out the foam for my 1/2” set.

@XanMan1980 3 года назад

I’d like to see future videos on power tool reviews

@larrylewis9132 3 дня назад

How do fit your tools to the foam. That's really cool and looks really nice.

@EvanTurnerMusic 3 года назад

Love the tool reviews. I'd love to see more of them!!

@davidgunther1282 2 года назад

You say (at 4:44) that those shallow drawers have a max height of 1-3/4”, but Husky lists them at 2” on the HD website. I have a Craftsman socket set whose storage drawers are 1-7/8” deep. Wondering if I can fit the drawers in these drawers and close them.

@bobgox 3 года назад

wow, that is one beautiful chest ...congrats (amazing the you did all yourself !) !!

@cavyboy99 4 месяца назад

Only thing i don't like is the shallow middle drawers. How deep are they exactly

@mlacher100 3 года назад

Nice box, really like to see tool reviews!

@lucky13demo 3 года назад

Love to see the compressor

@MarkSigmon Год назад

Good luck getting it....they lost the first one now waiting on the next one...don't order through Lowes the delivery sucks

@MarkSigmon Год назад

Ordered through Lowes and the delivery service has lost 2 of them now...yup Ordered another one, supposed to be here tomorrow..... we'll see

@Canadiancarguy1987 2 года назад

Hey Great channel you got here man I am on Board!!! Good Tool Reviews!! Cheers

@jtraveny 2 месяца назад

how often does this go on sale? its 1548 right now

@kevinfotsch6421 2 года назад

Nice tool chest or what your purposes I have a lot of larger tools I would appreciate any type of suggestion maybe the 52 if you could describe it or something like that from husky or the US generals thank you