Best Value 4Runner Bumper and Winch | C4 Fabrication LoPro Bumper & Badlands Apex 12k Winch Install

Подписаться 29 тыс.

Просмотров 27 тыс.

50% 1

Finding the best bumper and winch combo for your needs is important. I decided I wanted some armor and a place for lights and a winch that would not break the bank. This setup has been amazing. The features for total cost is hard to beat elsewhere. Plus, if you do not like these brands, there may be comparable alternatives by some of the offroad manufactures. As always, if you have any questions feel free to ask them below. Otherwise, enjoy how I installed these on the 4Runner and why I absolutely love this combo.
Oh, also I used this winch to pull a full size truck up a rock face in Colorado...so yeah. It works.
"OVLDENG" for 5% off C4 Fabrication
Rear Bumper: bit.ly/464iyoH
LoPro: bit.ly/3PeFKdY
High Clearance Additions: bit.ly/3LEGDdD
Rock Sliders: bit.ly/48IvXVl
Ladder: bit.ly/46tzgNR
Skids: bit.ly/46of00c
Diff Skid: bit.ly/3t7zV9F
Gas Skid: bit.ly/3PVI6ih
Dual Battery Tray: bit.ly/3RBSsVv
Sherpa Crestone Roof Rack: bit.ly/3ERnfGm
APEX Badlands 12k Winch: www.harborfreight.com/apex-12...
_________________________________________________________________________________________________
Instagram: / overland_engineer
Patreon: / overlandengineer
Website: www.overland-engineer.com
_________________________________________________________________________________________________
Some gear I use:
GSI Non-Stick 12" Pan: amzn.to/32GikFe
Jetboil Flash: amzn.to/3gBDjB8
MSR Backpacking Stove (Closest new thing): amzn.to/3sH4cpS
Yeti 10 Oz Rambler: amzn.to/3sJUH9t
Yeti 35 Oz Rambler: amzn.to/3ayktHv
Smittybuilt 2781: amzn.to/3tK6fdP
Orca 26 Qt Cooler: amzn.to/3tKJira
Camping Water Container: amzn.to/3awr4BW
Midland PPG1000: alnk.to/4Mtwmtb
Midland MXT275: alnk.to/btgG7un
Midland Radios Discount Code: "OVRLNDENG" for 15% off
Midland 6dB gain antenna: alnk.to/aAGTdqH
Midland 6dB gain mount:
Rago Fabrication Dash Mount: www.ragofabrication.com/colle...
Rago Fabrication Driver Side Antenna Mount: www.ragofabrication.com/colle...
Ethernet Passthrough: amzn.to/3sqCVZk
Center Console Tray: amzn.to/3w8xekU
Gloves: amzn.to/3o0sqZW
OEM Light: amzn.to/3sCtciY
Tarp: amzn.to/2KpNmvB
Packing Blanket: amzn.to/3p6Fhe4
Tiny Air Compressor: www.harborfreight.com/12v-100...
Traction Boards: amzn.to/3nY7VN7
Snatch Strap: amzn.to/3o2brGF
Socket Set: amzn.to/3sB30oT
Jumper Cables: amzn.to/39Kqgsb
Tire Pressure Gauge: amzn.to/3szELaL
_________________________________________________________________________________________________
4Runner Build Links:
Grill Lights: cartrimhome.com/Black-Style-L...
LFD Cross Rails: www.lfdoffroad.com/catalog/toy...
LFD Wind Screen: www.lfdoffroad.com/catalog/toy...
Gloss Black Vinyl: amzn.to/3iokqk1
Apache Storage Box: www.harborfreight.com/9800-we...
Traction Boards: amzn.to/3nY7VN7
Mattress (Full Size): amzn.to/35PTdla
APEX Badlands 12k Winch: www.harborfreight.com/apex-12...
C4 Fab Lo Pro Bumper: c4fabrication.com/products/4r...
OME 3" Lift: ok4wd.com/old-man-emu-3-suspe...
---I have 2887 Front Springs, Rear 2898 Springs, 90010 Front Struts, 60080 Rear Struts, Stone Guards, and 5 mm Driver Side Lean Spacer
_________________________________________________________________________________________________
_________________________________________________________________________________________________
The Desk I use:
Standing Desk Discount Code: R-ca5d0e
Autonomous Smart Desk DIY Kit: rb.gy/61ouoy
_________________________________________________________________________________________________
Disclaimers:
-only products specified in this video or a previous video have been supplied though a sponsorship or partnership
-some links may be part of an affiliate program to help support the channel.
-the music I use: www.epidemicsound.com/music/f...

Авто/Мото

Опубликовано:

1 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@twintips420 3 года назад

Nice video. I’m having one built now for my ‘21 TRD Pro. Do you know how much weight you removed (cutting the plastic bumper out / removing the metal bar that’s there) and the approximate net weight gain of the new bumper? I’m curious about the effect on suspension.

@OverlandEngineer 3 года назад

Also remember the extra weight of potential lights and winch, shackles, etc. I would say the bumper is probably like 60-70 lbs. The winch is also probably like 60-70 lbs. The plastic and bar removed are probably like 30ish pounds...Just ball-parking off my memory. If it helps, the springs I bought for the front were to accommodate 230+ pounds of weight and do everything to prevent low front rake. If you never plan to swap the bumper out maybe go one spring rate lower? For OME, thats the 2885 spring which is rated for 70-180 lbs extra. Thats probably more accurate for added weight.

@twintips420 3 года назад

Thanks for the reply, and good points. I’m not adding a winch right away and I’m adding the Baja Designs light bar which remarkably is advertised at just 5lbs. If 30lbs is removed, it’s about 50-60lbs net weight gain I imagine. I actually just had a representative respond from Fox Suspension today on the subject, and their team states that up to 70lbs of added weight should not require suspension retuning, so I suppose it is right on the line without the winch option. At any rate, I’ll look into those springs you suggested. Thanks again and I’ll be sure to subscribe to your channel. -Eric

@OverlandEngineer 3 года назад

@@twintips420 All good! Yeah if you have pre-existing suspension then I totally would understand not going through the hassle of changing the setup. You won’t be able to put those springs on the stock suspension though if I remember. If you add more weight than the 50-70lbs you will probably have to sell the stock fox suspension...also depending on your interest or use for the build you may not like the nose dipping and then the vehicle will not be level on the fox suspension. Many guys want to update their SR5 stock suspension to “Toyota approved fox suspension” so the TRD pro suspension like new sells halfway decent I have heard. Also, maybe you are a big Baja designs fan but for the same price you could buy a diode dynamics light bar and harbor freight badlands apex winch. Obviously its going down an upgrades rabbit hole because then you are getting lights, winch, and then new suspension to accommodate the new weight but dang Baja Designs is expensive for a lot of performance but much more light performance over typical needs. For example, nice low beam aftermarket LED headlights will put out roughly 4000 lumens combined. The diode dynamics bar puts out over 11,000 in white combo and Baja Designs put out 19,000 in white combo. I love Baja but they are expensive. Anyways, sorry for the super long response. Oh...did you already buy it with the bumper?

@twintips420 3 года назад

@@OverlandEngineer I went with Baja Designs only because C4 sells them with the bumper as an option on their website. I suppose other light bars will work fine. A focus of mine is to keep the truck as stock as possible, but the C4 Lo-Pro looks awesome, honestly surpassing the factory look IMO. But again, weight gain is a slight concern still. An interesting solution I am in process of researching now is a lithium ion battery replacement from a company called Antigravity. Believe it or not, the weight savings from their battery would be nearly 50lbs and almost counteract the bumper's added weight entirely. I'm waiting to hear back from their team to determine if their battery would be a good fit for a 4Runner in the climate I live in.

@OverlandEngineer 3 года назад

@@twintips420 Completely understand! That's awesome! Don't get me wrong, Baja Designs lights are really nice.

@Unit13FREMSLT 2 месяца назад

"...that's not good." says every do-it-yourselfer! lol Thanks for sharing!

@LikeOnATree Год назад

Thanks for the overview of the C4 LoPro Bumper and Badlands winch. It’s very helpful to be able to see how much room there is and how the various pieces will fit together. A lot of the videos out there show how to attach, but don’t give as much visuals as to the guts of the inside of the bumper area. Thanks again, great video!

@Tom_Sawyer_ 3 года назад

Great video dude. Very helpful, picking up my first 4runner when she gets off the boat in August.

@OverlandEngineer 3 года назад

Thanks! Glad you liked it!

@lionelandujar7132 3 года назад

Great video! Just got my C4 Lo Pro Bumper today. I also got the high clearance bars. I'm also thinking about getting the Badlands Apex winch since the Warn Zeon 12S Platinum's price is ridiculous. You might want to look into painting the bumper with truck bed liner. It's a lot stronger and durable than rattle can paint and you can still retouch if it gets damaged, contrary to powder coating. I bought some Raptor liner off of ebay for really cheap.

@OverlandEngineer 3 года назад

Yeah, in hindsight it’s what I should have done...I will probably just remove it and send it to powder coating if it ever gets bad at this point. It is really challenging to paint the inside.

@robertwehlau8906 3 года назад

Nice video thank you. I just bought the same winch and have a c4 fab low pro bumper coming with a high bull bar for my 21 trd pro. Where did you relocate the top of the winch to? Thank you

@OXFOOT 3 года назад

Dope! I'm going to have to repaint mine pretty soon. The powder coat chipped off so I'm going to prime and truck bed it.

@OverlandEngineer 3 года назад

I should have bed lined it instead of spray paint...oh well.

@kingbetong8741 Год назад

I did mine on my build althought i went to SSO and it looks good when you put those low front bumper

@OverlandEngineer Год назад

I agree!

@jjcustomcards 2 года назад

Thanks for the vid

@robertwehlau8906 3 года назад

Just saw where you relocated it lol. Nice job

@OverlandEngineer 3 года назад

This may need slight tweaking because I think my horns sound different due to airflow. You may want to put in some spacers so they are a little farther away from that panel.

@dave1096 Год назад

Good shit man... Nice job. Did you consider the cheaper Badlands ZXR 12000 lb winch? Its almost half the price but I think the control box is not removable.

@albertpak314 2 года назад

Did you have to push the ac line out of way at all to fit the badlands winch?

@user-gk3gp3rs3s 10 месяцев назад

Any chance you can share the dimensions of the aluminum plate used to mount the winch control box? I’m gonna take the same approach (and thank you for the idea!)

@rieber219 Год назад

Does your TRD skid plate touch the bumper? I did the same set up and i was curious about yours. It looked like it in the video but i just wanted to confirm with ya. Thanks

@sampathusa 3 года назад

Nice setup man. Just a quick question, would this bumper be too heavy for bilistein 5100 with factory coil over in the front?

@OverlandEngineer 3 года назад

Thanks! That’s tough to say...it depends on how much weight is in the back. I would presume it would not be too heavy but you won’ get the full 3” lift of the 5100s with extra weight in the front. So you will have a front rake. But if you are carrying quite a bit of gear it may level out. I may make the ride a little more comfortable to have the springs more compressed but I presume that is counterproductive since you want 3” of lift.

@sampathusa 3 года назад

Copy that! Thanks for your input

@TNGUYEN415 2 года назад

Where did you get the kill switch?

@K_H-Channel 2 года назад

Os this a trd pro? If yes, any negative impact from the weight of the bumper and the winch?

@OverlandEngineer 2 года назад

Yeah it is a TRD Pro. The only negative impact would probably be MPG. But hardly a hit and mostly due to the lift. It has a 3" Old Man Emu lift in this video. Front springs are the heaviest duty you can put on the front struts so its made to handle the weight.

@Rooster_king 2 года назад

How's the spray paint finish holding up?

@OverlandEngineer 2 года назад

It works but needs touch up

@dave1096 Год назад

all that extra wire and cutoff switch came with it?

@OverlandEngineer Год назад

Yep!

@dave1096 Год назад

@@OverlandEngineer tks! ordered!

@OverlandEngineer Год назад

C4 bumper or winch? I’ve got a 5% off discount for C4 if that helps. “OVLDENG”

@fixittony Год назад

Couple questions: (1) noticed rad fins dented…what do you think caused that? (2) I noticed in your s and all other bumper install videos the removal of the factory aluminum bar. How do aftermarket bumpers change airbag performance? I imagine the aluminum bar allows for some flex and avoid premature airbag deployment. Maybe not an issue…but see direct attachment of a steel bumper that looks like would transfer all energy to the frame. Do the aftermarket bumper makers even have data on their bumper’s performance with airbag systems?