BEST WAY To CLEAN Under The MOWING DECK on a Riding Lawn Mower

Подписаться 674 тыс.

Просмотров 3,3 млн

0% 0

ESSENTIAL winterizing tip YOU MUST TRY with your riding lawnmower - 5 minute easy solution to help prevent your mower deck from rusting or rotting out during the off season and costing you hundreds of dollars in the future. No need to remove the deck!
Is your mower deck rusting out or packed with grass and debris, why replace your ride on deck when you can prevent rotting by using the wash out port attachment.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a washout port kit ➜ amzn.to/2Sbsbvf
✅Click here to buy a new belt ➜ amzn.to/2JmuKqo
For more videos like this, check out:
👉How To Remove The Mowing Deck ➜ • How To Remove The Mowi...
👉How To Install A Belt On A Riding Lawn Mower ➜ • How To Install A Belt ...
👉How To Fix a Riding LawnMower That Will Not Move or Drive ➜ • How To Fix a Riding La...
👉How To Adjust The Belt Tension On A Riding Lawn Mower ➜ • How To Adjust The Belt...
🔧WELCOME to the Steve’s Small Engine Saloon RU-vid channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepairs #smallengine #repair #troubleshooting #engine #howitworks #doityourself #smallenginemaintenance #lawnandgarden #ridinglawnmowerwontstart #ridinglawnmower #johndeere #honda #craftsman

Хобби

Опубликовано:

23 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 4,7 тыс.

@StevesSmallEngineSaloon 4 года назад

✅Click here for a washout port kit ➜ amzn.to/2Sbsbvf ✅Click here to buy a new belt ➜ amzn.to/2JmuKqo For more videos like this, check out: 👉How To Remove The Mowing Deck ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eQlGRlIDcC0.html 👉How To Install A Belt On A Riding Lawn Mower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UgW4gcPAWIs.html 👉How To Fix a Riding LawnMower That Will Not Move or Drive ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fnhenk37KcI.html 👉How To Adjust The Belt Tension On A Riding Lawn Mower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iXy0nSfg7h4.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

@carmichaelmoritz8662 4 года назад

maybe i'm lucky in a way . i have a private lake on the property i live on and all i do is drive in the shallow a bit just enough so that the water touches the bottom of the deck and wallah the water is sucked up into the blades and cleans it perfectly every time . :))

@jimmysapien9961 4 года назад

Way to go Steve . And I gave $$ to your Website, so you won’t Run out of Beer !!!

@larry3576 4 года назад

I have a John Deere and it doesn’t do a good job at all

@w.petepedersen9888 4 года назад

Larry 357 did u lower the deck to the ground over concrete or asphalt? Just a hint, because I wouldn’t have known that without watching Steve’s video, I did know about keeping the blades turning however. Hope it works for u Larry, God Bless!

@jimmysapien9961 4 года назад

Larry 357 try an Ex Mark 👍🏻👍🏻👍🏻

@dwarden3 4 года назад

After about 10 or 12 beers my mower is usually on it's side "naturally" then I just wash it out after I wake up.

@unrulybot1352 4 года назад

This comment made me chuckle for 5minutes straight

@nonenone8819 4 года назад

Hand down the funniest comment on the internet ever! CONGRATULATIONS YOU ARE A WINNER!

@jimmysapien9961 4 года назад

I won’t tell

@garychandler4296 4 года назад

Must be Irish; clutching the grass to keep from falling off the earth...

@muskeyr2543 4 года назад

Hahaa!!

@conniejon100 2 года назад

Thank you for the information about using the washout port. My husband always took care of the yard and all the equipment, so when he died I didn't even know I was supposed to wash off the lawn mower, much less underneath. I have found your videos very helpful. At 68, I'm learning new tricks and hope to keep my mower in good condition for the rest of my life.

@crawwwfishh3284 2 года назад

Keep the grass washed off it holds moisture and that will cause the deck to rust. Be safe

@Horizon301. 2 года назад

Sorry for your loss.

@davidhighland7080 Год назад

One other suggestion: After you’ve performed the simple steps in this video, disconnect the water, and then run the engine with blades engaged (with you in the driver’s seat, safely out of the way) to dry the undercarriage. A few minutes will do it!

@Jimmythepin 11 месяцев назад

I have a 13-year-old Craftsman 42" lawn tractor. I have used it twice a week, every week since I bought it in 2010. I use the wash-out port almost every time I get done mowing, and the amount of gunk that comes out from under the deck is amazing!! Also, I am in the process, today, of sharpening my blades and scraping down the remaining residue/grass/crud under the deck. (I don't do this part as often as I should.) I am very happy to say that there is ZERO rust under my mower deck, and I swear by using the wash port!

@StevesSmallEngineSaloon 11 месяцев назад

Right on buddy! Thank You...

@rogerthat.9105 8 месяцев назад

Would it be a yt 3000. By any chance…… Because that is about the timeframe that I bought mine from Sears Husqvarna built YT 3000

@TheAgentAssassin 7 месяцев назад

Wish I had done this my 10yr mower deck is a little rusted. Still going strong though. I did put a k66 transmission on my little d130 ,it's been an awesome upgrade.

@johnsomerset1510 4 месяца назад

If you use your mower twice a week, every week since 2010, you must live in a warm area where your grass never stops growing and you probably mow the grass when it's dry. So, you won't be leaving your mower for months on end, clean or dirty. So, it's not flipping surprising it's not rusting.

@jshkrueger 3 месяца назад

@@johnsomerset1510It's actually very surprising to me that people have an issue with their mower decks rusting. Are y'all mowing in the rain, or something? I live in Nebraska. I've had the same John Deere riding mower and deck for over 30 years. Very little rust under the deck, only a surface rust in parts. Certainly no spots where it's rusting through.

@wallyschloeffel1678 2 года назад

I have been told by a professional lawn care business who has quite a few Ride Ons (you call them lawn tractors) that he does wash under his deck regularly but never washes the top of the deck, he has had issues with spindle bearings failing prematurely when water gets into them. He does remove the guards for the spindles and driving belts and cleans out debris that builds up in that area but never washes them anymore from the top. He has found that he rarely has spindle-bearing issues since not washing the top of the deck.

@1Tibs1 18 дней назад

just have to know what needs to be greased or not, waxed, everything we have should come with a basic maintenance manual.

@robertbeacham4314 11 месяцев назад

I’ve never used the wash port. I clean underneath 4-5 times a year using a putty knife. The old girl is 26 years old, and still in use. New pull cord and new wheels with oil changes from time to time has kept her going . Craftsman from 1996

@hollyagnew3257 2 года назад

My husband died recently so I have had to learn allowed thos stuff. I have wash ports on my 54" cub cadet xt2, but not on my John Deeres. After seeing this video, I'm going to have some installed on those, too. I love watching all the gunk fly out.

@hunterjacobs2178 2 года назад

Good luck

@ronvera 3 года назад

I live on the Texas Gulf Coast. Lots of thick fast growing St Augustine grass and very fertile soil and lots of rain. When my deck is getting a thick coating of grass and mud underneath. I just drive it close to our ditch or a puddle in the yard and let the left edge of the deck sit in about 2-3 inches of water and engage the blades at max rpm . It catches the water and spins it violently around the deck and blows it out the discharge as a green malt until it clears up. It normally washes the deck clean.

@hueydevotedUH1 4 года назад

I was ALMOST going to comment half way through about him leaving the mower deck up......then after another minute realized it was very intentional. Shame on me for doubting a man who's mind is sharpened with Old Milwaukee.

@StevesSmallEngineSaloon 4 года назад

LOL! Right on JR....

@bobwayne911 4 года назад

@@StevesSmallEngineSaloon LOL

@sureshots8155 3 года назад

Ten months later. We are still laughing 😆

@1on1c5 3 года назад

I mean the man wears Crocs and drinks Old Milwaukee.....what isn't to trust?

@paint3ball 3 года назад

@@1on1c5 your farts

@sevenmile 3 года назад

Kudos for actually voluntarily taking the deck off TWICE for the sake of this video! Never have been impressed with the washout port, and then tonight watching the video.....oh,wait... lower the deck????

@StevesSmallEngineSaloon 3 года назад

Right on

@lowandslow3939 3 дня назад

I commented earlier about my JD X394. I’d been doing it wrong for the last year. Yesterday, I followed your instructions to lowered the deck as far as it would go. I also removed and cleaned the debris from the spray nozzle. Wow! What a difference! I couldn’t believe how much crud came off. THANK YOU!!!

@StevesSmallEngineSaloon 2 дня назад

You're Welcome...

@rjgoniea 3 года назад

Trying not to mow wet grass also helps a lot. I drop my deck when winter comes so I can install the snowblower attachment. It's never looked as caked as yours did before the cleaning. It may also help that the last few uses in fall are doing leaf cleanups and I try doing them when they are dry as well. If the leaves are dry enough, they pulverize into a fine dust I can just leave on the lawn to return nutrients to the soil.

@qdllc Месяц назад

That’s a big part. Wet grass not only sticks, but it clumps and makes a messy cut.

@TomTom-by5sx 5 лет назад

Steve, I know you did that twice so you could have another beer, nice...

@FernandoRodriguez-ds5ri 5 лет назад

This is great video but let me just add a small tip... after washing out the deck turn off the water supply and then turn on the blades again for at least another minute. This will help air dry the blades and underneath the deck to prevent rust. DallasCityOfChampions

@jamesmoore3346 5 лет назад

While at it, clean the top side also, if clippings build up on the top they hold moisture and doesn't take long for rust to show up.....

@michaelw7540 5 лет назад

Better yet.... Keep the deck sprayed with WD-40 means less cleaning time, less water used, it'll stay cleaner longer, and guaranteed no rust. Plus keeps blades sharper longer. Also, buying WD-40 by 5gallon buckets is by far cheaper and can be added to any spray bottle such as an old Windex or even a febreeze spray bottle. I've been doing this trick long before those crappy plastic hose connections were ever even thought about on a mower. Works wonders on off-road vehicles, too!

@jamesmoore3346 5 лет назад

@@michaelw7540 I rebuilt my first car motor when I was 12 tears old, I'm now 62, kinda in a forced retirement due to lung cancer, I BEAT the cancer but have yet to get past the ill effects of the chemo and radiation. I've been a mechanic of one form or another my entire life. I fully believe in WD-40, just when you think you used it every way there comes yet another thing it's good for. WD-40 got it's origins during the saturan 5 rocket days. Seems they were having issues with rust glaze starting on some expensive rocket parts so they approached a team of engineers to come up with something to control the rust fissue. Long story short the engineers were sucessful, the product is what we know as WD-40, to break it down, WD stands for water dispersant and 40 is the number of formulas they tried before they got it right, hence WD-40.

@rebas04 4 года назад

I do the same and it dries surprisingly fast. A leaf blower works great on the top to dry

@hatch98023 4 года назад

james ,,’,lelellelelelelemoore

@hermanmunster714 Месяц назад

Real good information with a splash of Red Green and twist of Dan Akroyd. Thank you 😆 🤣

@StevesSmallEngineSaloon Месяц назад

Our pleasure!

@poodlesrock2266 21 день назад

End of the season..deck comes off, scraped clean and wire brushed and use a paint brush and brush old motor oil on the deck. My mower is a Deere from 1986. A Kawasaki engine changed oil and filter every season, greased and good to go. I have only changed blades, drive belts and mower spindle bearings. Great channel..great info

@shanenewby8646 4 года назад

I use a pressure washer with a gutter cleaning attachment (U shaped) on the end of the wand with the green tip. If you put the tip facing up you can pivot it on the ground and move it around till the deck is clean.

@w.petepedersen9888 4 года назад

Thanks Steve, this is the first time watching u, “won’t be the last”, on washing the under deck of riding lawnmowers very informative. You took the time to remove your deck several times so we could see the actual results of each process, that is patience, dedicated work, & thoroughness in educating us. And, no I have not used it before but will definitely use them from now on (my walk behinds also have these hose fittings).

@StevesSmallEngineSaloon 4 года назад

Right on

@pleappleappleap 3 дня назад

What I learned from your video is that the wash port is a quick connect. I was unscrewing it every time.

@saw6436 2 года назад

I don't even have a yard and I like these videos. Very informative!

@StevesSmallEngineSaloon 2 года назад

Awesome! Thank You...

@fredkeele6578 4 года назад

"Old Milwaukee is good enough for doing this" You're killing me Smalls 😂😂😂

@ScatPackRob 5 лет назад

Thanks for the tip. I tried it. Drank a six pack of Stone IPA while it was cleaning. When I woke up the deck was cleaner than it was when it was new.

@brussell2932 3 года назад

I have used the wash port(s) successfully on my mowers for years. The key is to use a Teflon based non-stick spray to coat the deck and blades twice per year. Gunk makes an excellent spray that I use on my mowers and my snow blower. Using the wash port every time prevents buildup. Run the mower for as long as it takes for the water to run clear. Then turn the water off and run the blades for several minutes to help to dry the deck. Use a leaf blower to clean off and dry the top of the deck. Store the machine with the deck raised to help with keeping it dry. The underside of the deck will remain clean and it wont stink up your garage with that moldy rotting grass stench. The spray also helps to protect the metal from rusting.

@wade8418 2 года назад

Thank you so much for sharing. Im going to check Amazon for Gunk !

@jasonp.brunke3601 2 года назад

I do the exact same thing as you... a different spray, but does the same thing... I also wax everything 1x a year... no rust after 600 hours... I drive a 2015 craftsman pro 7400 (made by husqvarna) 54" 26hp kohler...

@brussell2932 2 года назад

I will add that GUNK also works great on my snowblower, especially with the heavy wet snow that tends to clog the chute. i am sure that there are other similar products out there that work well too. GUNK Teflon spray is just my favorite.

@Manhandle730 2 года назад

Just throwing in another vote for the Gunk lawnmower deck spray. Really good stuff after washing I’ll spray it down with WD-40 too. This will help with preventing the rust from beginning.

@jakkbatt4711 2 года назад

Great tip, I use crown oil spray, it's environmentally friendly so no harm😉

@thomasmoje5926 Год назад

Three years ago I bought a brand new Husqvarna lawn tractor with a heavy duty fabricated (welded up heavy gauge not pressed steel) deck it has a 'wash port' on it. Came with the adaptor to attach water hose tried it out a few times it did not work all that well still had grass accumulation in parts of the deck. Ended up buying a 'tractor lift' which enables me to raise up the front of the tractor so I can wash out the underside of the deck much more effectively. Good investment in my opinion. I try to wash the underside of the deck after every mowing then clean the deck really well, brush off any residual grass/rust accumulation with a wire brush, degrease it and paint it when done for the mowing season for storage during the winter. Decks are usually the first thing to go on a lawn tractor so some care and maintenance of it pays off in the long run.

@mac11380 4 года назад

I tried this and my mower hopped up and down after that, I guess I shouldn't have used spring water.

@tazwowe 4 года назад

HarHar

@nwhite3562 4 года назад

Lmao

@myrond3588 4 года назад

dad jokes

@ChunkyLover53atAOL-com 3 года назад

Ba Dum Tiss!

@dworkx1 3 года назад

If you find holes in your deck next spring stop using holy water.

@catman1050 3 года назад

Last year I was cleaning up a field with lawn tractor. I really should have had a bushcutter or rough cut machine, but the lawn tractor did a very good job. The blueberry and rose hip bushes did an amazing job of cleaning the deck. It looked like it was sand blasted, lol.

@tadpoleone8341 2 года назад

I jack my mower up and use my pressure washer on it, comes out looking new 100% of the time.

@NordicDan 2 года назад

My 22" Toro Recycler has one that I use every time I mow. I've found that it works really well when being used to maintain a clean deck, rather than to clean a deck that already has a bunch of old hardened buildup on it. When I cleaned the deck completely and then used the was out port after every mow, my deck stays almost completely clean throughout the season. Makes winterizing far quicker.

@Lewis_T 2 года назад

Makes good sense. I use my wash port about once a year, I’ll go ahead and increase that now. 😆 I got tired of second hand riders a couple years ago and bought a new one. I took the deck off and undercoated it real well, I was surprised at the lack of when I got it off. My last rider was a ‘94 model 46” I bought second or third or so hand. I was always working on something to keep it running, but the deck finally rusted a hole through it significantly so I bought my first new one. I’ve used 3 or 4 since the 80’s. It sure is nice to hop on the new one, crank it right up, mow and put it up without turning a wrench. Plus I’m not trailering this one around mowing lots of grass. So I undercoated it real well, and have only used the port a few times. That’s about to change.

@mrscrapper3331 4 года назад

Holy crap! I had no clue what that goofy fitting was even for! Thanks!

@StevesSmallEngineSaloon 4 года назад

No problem!

@michaelr.williams8176 3 года назад

Realey. For real. Come on

@davidhenderson3400 5 лет назад

I work in a mower shop. I have one customer that always has the cleanest deck. I asked how. He tells me there is a small creek in his back yard. He just turns the blades on and drives it into the water.

@StevesSmallEngineSaloon 5 лет назад

Right on....

@TheHamadanners 5 лет назад

Yep

@MultiTurbospeed 5 лет назад

@@TheHamadanners never cut wet grass and you'll never have to worry about the under the deck.

@davidhenderson3400 5 лет назад

@@MultiTurbospeed We have pro cutters that will mow the lawn in the rain They contract for X number of cuts and get paid by the cut so they cut in the pouring rain or even when the grass is dried out and dead they will still cut. Even if they are only cutting dirt.

@How_Lay 5 лет назад

@@davidhenderson3400 sounds like an incredible waste...

@hillbilly3366 Месяц назад

Good information! Steve is why I installed a wash port on my old Cub Cadet a year or two ago. This is worth revisiting. I do it EVERY time I mow. Thanks Steve!

@kortnieb 3 года назад

Please never stop making videos. I love listening to you and I love that you drink while doing it. I'm learning so much about my mower and i can't wait to teach my husband.. It just sound like I know what I am talking about

@StevesSmallEngineSaloon 3 года назад

Thank you! Will do!

@Levy3o8 4 года назад

I love the shot of you riding up by the camera and holding the beer out for a cheers. Total gold.

@StevesSmallEngineSaloon 4 года назад

Right on Buddy...

@jaxxx010 3 года назад

Didn't know lowering the deckmade a diference. Learned so much from Steve! Legend

@StevesSmallEngineSaloon 3 года назад

Right on

@vvegas9221 15 дней назад

I watched one of ur vids a couple yrs ago on the walk behind mower cleaning. I have done it ever since on my toro. dropping the deck is the way to go.

@StevesSmallEngineSaloon 15 дней назад

That's awesome

@richardnaimark8781 2 года назад

You have one of the best “how to…” threads on RU-vid! Clear explanations, good visuals. Every time.

@StevesSmallEngineSaloon 2 года назад

Wow, thank you!

@garrykrause2375 4 года назад

HEY STEVE--JUST CLEANED MY DECK--WHAT A JOB IT WAS-IT HAD MOLDED AND IT WAS SO THICK -I JUST WANTED TO WATCH YOUR VIDEO ON THE MOWER DECK CLEANING..

@sisterinspeed 5 лет назад

My husband just called and asked what I was doing, when I said I was watching a video about cleaning my mower deck he laughed at me lol

@StevesSmallEngineSaloon 5 лет назад

YOU GO GIRL! Right on...

@fredlyons4161 5 лет назад

It sounds like you're a keeper!

@thesoundsofchill5939 2 года назад

Thank you for the instructions on how to do it correctly! I had an idea but I was not right when I first guessed about the deck lowering. Really enjoying this channel I always learn a new something to help in the yard.

@StevesSmallEngineSaloon 2 года назад

You are so welcome!

@xecukc7010 2 года назад

I haven't been using my port, but after all these years, I'm going to. I have been cleaning the deck the hard way! Thanks!

@StevesSmallEngineSaloon 2 года назад

Glad I could help!

@lucyscottwalker2203 5 лет назад

I sent this vid to my husband because he loves his mower and he loves his beer. Great tip!

@StevesSmallEngineSaloon 5 лет назад

Thank You...

@ebla83 5 лет назад

Any man who drinks Old Milwaukee has my vote for confidence.

@carlmiller8900 2 года назад

When I saw you drinking Old Milwaukie I knew you would make a good neighbor. Great video, thank you.

@StevesSmallEngineSaloon 2 года назад

Thank You...and You're Welcome...

@marchearn9058 3 года назад

I wondered why mine never worked and now you've shown me the correct way to do it. THANK YOU!!!

@StevesSmallEngineSaloon 3 года назад

You're Welcome...

@frankway3507 4 года назад

Hey Steve, I love your channel, I am 58 now and work on nothing but my own equipment but used to have a small engine repaired business 30 some years ago, and like you a beer would help. I have learned a few things from you that I didn't know. Keep up the good work. Frank.

@StevesSmallEngineSaloon 4 года назад

Very cool!

@doncrocker916 5 лет назад

I have never used the hose cleanout on my JD. But now I have an excuse to go sit for a wile and have a beer or 3 and can't hear the wife yeling at me!!!!!

@BelleHammer 5 лет назад

LOL!! Yea!! Jack :)

@italianwiseguy4658 4 года назад

LMAO!!!AMEN TO THAT BROTHER!!! CHEERS!!!

@phillipprince65942 4 года назад

Lol

@Freedom-Fighter1 3 года назад

@carbine1776 BOB got rid of the wife last year. No more getting yelled at for anything!, life is good 😁

@Upracefan 2 года назад

Don’t do it, unless you like replacing spindle bearings. Ask me how i know!

@stanbigst Год назад

I spray the underside of my (clean) deck with PAM cooking spray (or similar brand) at the beginning of the mowing season. It works great at keeping the grass from sticking in the first place. I would think if you used that along with the deck washout, the deck would be clean in less than 2 minutes. I'm able to lift the front of my mower up, so I just hit it with a garden hose nozzle. This works great with a walk-behind mower too.

@philliphall5198 9 месяцев назад

I paint mine with used motor oil and brush Works great

@jameslomenzo1139 9 месяцев назад

WD-40 works good to, cheap oil works better.

@bikeny 8 дней назад

So I don't have a riding mower at this time, but I had planned to. It'll happen next year. But now I know what to do after every mowing session. I am now a subscriber.

@StevesSmallEngineSaloon 7 дней назад

Right on

@chestermorningstar1958 5 лет назад

Cold enough to see your breath, but warm enough for Crocs! Good Vid. Need a port for my old Wheel Horse.

@ricktruman1416 4 года назад

When I was 10 or so one of my chores was cleaning the under side of the lawn mower. Boy I think this would of been a life saver.

@majorpayne5289 8 месяцев назад

👍Yes sir, been doing this for years. It’s like a pressure washer in action w/ those blades running. I tell everyone after I service their mowers. Riders or push type. Works great. Lots of folks don’t realize what it’s for & some wonder why it’s not working well when they hook the water hose up. Come to find out, they’re not engaging the blades. Lol! Keep up the good work Sir Steve. I’m going back thru some older videos as business has been down as of late & have some chill time on my hands. Take care. 👍

@kabooomkal 4 дня назад

I’ve only used it on my zero turn. Works good. My mower has one. I just tip it up.

@harrylangley3781 5 лет назад

Glad I stumbled across this video. Just purchased a new mower last month. Will utilize this feature after each time I mow. Thank You Steve.

@StevesSmallEngineSaloon 5 лет назад

You're Welcome...

@xgtmg 5 лет назад

I don't save a lot of money watching your videos since I have to have a beer or 12 after watching.

@troyw1649 4 года назад

I love this guy, great tips and good beer! lol

@troyw1649 4 года назад

your videos are are an inspiring great tips! very helpful,, and love the beer tasting, lol

@willieboy3011 8 дней назад

Steve, that is great to know. I live in Arkansas where the crawdad mounds are everywhere. From March through May, the water table is high from the rains, so I have to put the mower on ramps, crawl under it, and scrape 5 gallons of mud from under the deck--everytime I mow. If I do not do this, the mud will pack and get so hard that the blades will not turn. I will definitely look for a mower with this port next time.

@d3w4yn3 11 месяцев назад

Okay, this answered the question I've been wondering about since I bought my mower. I haven't done this even once, but I'm replacing the blades and the spindles even, so I'm going to clean the deck out really well, then I'm going to do this from now on!!! Thanks for posting!!!

@StevesSmallEngineSaloon 11 месяцев назад

You're Welcome...

@waburden 4 года назад

Hey Thanks Steve! Great tip about lowering the deck all the way! I use the wash port after every cut but I never thought to lower the deck all the way and I usually cut pretty high. I see you do the wash port on the pavement as well and I'll copy that as well!

@anthony9thompson 3 года назад

I love how you do so much work to prepare your props for you videos

@StevesSmallEngineSaloon 3 года назад

I appreciate that!

@oopiestevie4131 Год назад

I spray the underside of my mower deck with fluid film. This helps repel grass clippings, at the same time protecting against rust.

@starpartyguy5605 Год назад

Just got a Deere X350 last September. Used it till November and put it away for the winter. I have the electric mulch kit. The salesman said that the wash port chamber is cut off from the rest of the deck by baffles. I only ran the wash port once, deck down. Didn’t do much. Just pulled the deck off to sharpen the blades and check the underside. Dull blades. Caked on grass. But I got it cleaned. Pressure washing for the deck and a mud and grass shower for me.

@1999Shortstuff 4 года назад

Love your channel. I have two older tractors (Deere L130 - 48" deck & Cub Cadet, Zero Turn - 42" deck). Neither have a wash out port. What I do is drive each tractor up on my car ramps several times a year and power wash the top and bottom of the decks. Works like a charm. Also, to minimize the amount of grass that collects under each deck, I never cut my grass when it is wet.

@cedricerleward Год назад

I love my power washer I use it to clean everything and blow dry with my leaf blower cleans my cars with no water spots or drip marks. Even use it to blow leaves off the lawn and driveway, etc

@Carskinify 5 лет назад

I just have a troy bilt push mower and I just found that if I tilt it up and spray it with the stream setting on my hose nozzle, it cleans it quite well and it also does a neater job on the lawn when it is clean from built up grass.

@eds.877 Год назад

Keep in mind, wash ports can possibly take out your spindle bearings fairly quickly due to water getting into them. Even if the bearings are supposedly sealed. I installed a wash port on my my 42 inch cut Craftsman. Just had to replace both spindles after using the wash port after 4 mowing's. Bearings started making noise. Deck spindles only a year old. I thought I had found a great way to clean my deck after each mowing. Not so much evidently.

@jothain Год назад

Likely your machine had some Chinese cheapos in there already. Just replace them with good quality ones. Costs s-tons less than replacing the frame. Cost difference is literally counted in tenfolds.

@hughhall3210 11 месяцев назад

A lot of guys do this right after cutting, possibly for hours if not the whole day. Introducing cold water on a very hot bearing will create issues. Let the deck cool before performing the wash. I have found that to work well.

@cuivre2004 10 месяцев назад

@@hughhall3210 Great point. I've seen people's neglected boat trailer bearing crumble like glass after a long trip to the lake, followed by launching the boat into cold water.

@MrGeorgeTBone 2 года назад

I just cleaned my mower deck with a hose and a wire brush. I mowed the lawn once (54" deck, about 3/4 acre of grass) and cleaned it my usual way - in the lawn with the deck up off the ground. Then I got curious, did a search and found this video. I pulled the mower back out onto the driveway, and flushed it out again with the deck all the way on the ground. Five minutes later the water finally ran clear. Great tip, you just earned yourself a subscriber

@StevesSmallEngineSaloon 2 года назад

That is awesome!

@willythemailman3911 5 лет назад

I put the hose and a bottle of whiskey between a chair and the mower I keep drinking whiskey until I'm on the ground near the mower I use the hose to keep hydrated while I'm down there Love your videos Steve. Keep up the good work

@hairburger62 5 лет назад

That sounds like quite the good rinse! LOL

@dp5383 4 года назад

When he pulled out the can of Old Mil, I knew I had to subscribe!

@StevesSmallEngineSaloon 4 года назад

Thank You...

@tomsnyder5324 2 года назад

Steve, I bought a Craftsman clean out kit online. Came with two drill bits for the correct size holes to drill, a self tapping machine screw to attach the clean out, the clean out itself and the quick-attaching hose coupling. Complete kit. IT WORKS BEAUTIFULLY. Bought two more for my other riders. Good video. Thank you.

@StevesSmallEngineSaloon 2 года назад

Right on Tommy!

@49Roadmaster 7 дней назад

Thank you for the great tips. I just my JD used and will have to look into this ASAP

@anthonyrettaliata7311 3 года назад

Dang Old Milwaukee!! I haven't had that beer since the early 80's didn't no its still being made.🍺

@boatman222345 3 года назад

On riding mowers decks are very difficult to clean manually so the deck port may make sense. On my Toro walk behind mower I've used the deck wash port and while it does help remove grass buildup it also splatters water all over the place leading to rust formation inside the motor housing. So for me the good ole putty knife scrapper remains the tool of choice because as in the song "Rust Never Sleeps!"

@dalemolden7910 16 дней назад

Great video! Yes, those wash ports work well. Just do it consistently and don't let the grass pile up on the underside of the deck.

@klassicracer 2 года назад

I bought a John Deere X107. Used it for the first time today here in England. Thank you for posting this excellent video. I now know how to wash the deck properly!

@StevesSmallEngineSaloon 2 года назад

You're Welcome...

@SuperToughnut 5 лет назад

Thank you so much for this video! Just bought my first rider. Good to know to lower the deck before washing out.

@StevesSmallEngineSaloon 5 лет назад

You're Welcome...

@johnmaynard4725 5 лет назад

Have you ever met a beer you didn’t like? Keep the videos coming🍻

@philipcham2574 5 лет назад

Yeh,. The alcohol free beers.

@mrbilllollar Год назад

I have the entry-level John Deere Zero Turn (Z235) and I just paid almost $900 for a new 42" deck, simply because I STOPPED using the wash port. When it was brand new, I used it faithfully after every cutting, but I got lazy and it completely rotted my deck within 5 years and only 49 hours on the engine. Great video!

@gregorymauldin5988 4 дня назад

Just came across this video. Looks like it has been here a while. I own a John Deere rider, similar to the one in the video, & I use my wash out port EVERY time I mow. It is approx. 5 years old now & underside of the deck looks great. I don't mow when grass is wet so, that helps a lot. I run the wash out after I mow, clean the rest of the mower after that, then let it dry before storing it. Never had any grass to accumulate under there.

@StevesSmallEngineSaloon 3 дня назад

Very cool!

@pyro323 4 года назад

I didn't expect that wash out port to actually work, but it does.

@edbaivier5660 5 лет назад

After you clean the underside of the deck let it dry and spray with nonstick cooking spray (think Pam) Makes clean up much easier next time....

@TheOzthewiz 5 лет назад

I use PB Blaster at end of season to cote the bottom of the deck after using 140psi air to clean it. NO WATER! My cheap MTD deck is still going strong after 15 years, spindles and all!

@floyd6545 4 месяца назад

Thanks for the info. I never believed that it would actually work. I Always use a plastic scraper.

@joshbeckett 11 месяцев назад

The mower I use and maintain has one of these … I never saw the manual when it was new and always wondered what the mulching cover was hanging on the wall … two lessons in one! Thanking you as always!

@StevesSmallEngineSaloon 11 месяцев назад

You're Welcome...

@nickmetalartworks1289 4 года назад

My first time on this channel. Great content. Strait to the point and no extra garbage. Good work

@StevesSmallEngineSaloon 4 года назад

I appreciate that!

@conorcrowley989 5 лет назад

Sprayed my deck with stonechip coating used to prevent rust on car frames

@rebeccabowers988 3 года назад

Good idea

@shermanjones1417 3 года назад

Learn something every time I watch you Steve. Hope you're still doing well.

@BarrySchnipper 7 дней назад

Nice Job explaining this, I never new how this worked, thank you

@StevesSmallEngineSaloon 7 дней назад

You're Welcome...

@huntershortrepairs 2 года назад

Also, keep in mind that not doing this will of course lead to rust as you mentioned, but more than that. By not cleaning your deck after each mow and letting it build up like that, you are reducing the efficiency of the mower and the quality of the cut. All of that caked on grass reduces the airflow under the deck which many of us know is essential to lifting the blades of grass and giving a clean cut.

@JohnKneece 2 года назад

Also seeds from weeds get added to your lawn

@floydlarken3148 2 года назад

Problem I had with mine was I washed it every time and the supposedly installed sealed bearings in a brand new mower went out within a year. They were completely rusted.

@MrSteelehead Год назад

“You get an A”.

@huntershortrepairs Год назад

@@MrSteelehead fortunately for me, my ryobi electric push mower has a plastic deck, and I don’t really have an issue with grass buildup, plus mine won’t rust, but I do store it upright as well so I always check for clumps. It’s pretty rare though.

@floydlarken3148 Год назад

@@huntershortrepairs I bought a Honda with a plastic deck 15 or 20 years ago and my Son is still using it. I was real leery of the plastic deck and it turned out to be awesome nothing ever stuck to it. The transmission started going and I gave it to my son cause he’s younger and can push a little ha ha. Best mower I ever owned, bought another Honda and it is junk.

@coopdeville377 3 года назад

Love the "Old Milwaukee" beer!

@StevesSmallEngineSaloon 3 года назад

Right on

@pamelalyon1030 Год назад

Yes you saved me time and knowing how to keep it clean👌 not breaking my back!

@matthewbrazil1697 День назад

That looked so easy that I am going to remove the deck on my mower (for the first time) and give it a good clean up and coat it with a film of oil !!

@zabimaru404 5 лет назад

Kale smoothies for everybody. I was wondering if you measured time in minutes or in cans.

@kurtrichter1732 5 лет назад

The kale I like best is spelled with a silent "K"

@tenncutt 5 лет назад

Looking at his shelf I would say he measures in bottles.

@rmhdsn284 2 года назад

After the second can would it even matter any more?

@bucknuts6762 5 лет назад

it convinced me to use the port from now on great info thank you

@StevesSmallEngineSaloon 5 лет назад

You're Welcome...

@johnmccormick175 3 года назад

Thanks Steve and perfect timing..i just bought a new mower with the place for the fitting and was wondering whether to bother..and thanks to you i will be buying one tomorrow..love your site,take care and stay safe.

@StevesSmallEngineSaloon 3 года назад

Glad I could help

@febeleven 3 года назад

Thanks for putting the Amazon links in the descriptions, that a time saver!

@StevesSmallEngineSaloon 3 года назад

You're Welcome...

@stephenfluharty8459 3 года назад

I was so curious bout the Washout port, thanks for doing this!

@StevesSmallEngineSaloon 3 года назад

No problem!

@bobvautour5207 4 года назад

Man glad I found you! You will save me a lot of head ache! Thanks!

@StevesSmallEngineSaloon 4 года назад

Glad to hear it!

@-Cece 2 года назад

Thank you Steve for this video. I saved to my watch later list and finally got around to viewing, too bad I waited so long. Very useful. Your work is appreciated.

@StevesSmallEngineSaloon 2 года назад

Glad you enjoyed it