How To SHARPEN And BALANCE A Lawn Mower Blade (The Correct Way)

Подписаться 675 тыс.

Просмотров 1,5 млн

50% 1

How to sharpen and balance a lawnmower blade the correct way. Easy and thorough DIY steps to sharpen a lawn mower blade and balance it as well to give your grass that nice clean cut.
Buy a proper blade balancer here ➜ amzn.to/2BmvxUO
👍Please click the like button and tell me what you think of this video in the comments section below.
For more videos like this, check out:
How To Install A Lawn Mower Blade Properly ➜ • How To INSTALL A Lawn ...
Proper Way To Tip A Lawn Mower Over ➜ • Proper Way To Tip A La...
How To Adjust the RPM Speed on a Lawn Mower ➜ • How To Adjust the RPM ...
How To Fix A Surging Engine On A Lawn Mower ➜ • How To FIX A SURGING E...
🔧WELCOME to the Steve’s Small Engine Saloon RU-vid channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
You can connect with Steve here too:
Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #diy #fix #troubleshooting #howto #engine #howitworks #doityourself #lawnandgarden #lawnmower #mower #lawnmowerrepair #mowerrepair

Хобби

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,2 тыс.

@StevesSmallEngineSaloon 4 года назад

Buy a proper blade balancer here ➜ amzn.to/2BmvxUO Check out these other informative videos: How To Install A Lawn Mower Blade Properly ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jsbTtEG078k.html Proper Way To Tip A Lawn Mower Over ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eeEVigsVqrE.html How To Adjust the RPM Speed on a Lawn Mower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7YrA3QEIFnE.html How To Fix A Surging Engine On A Lawn Mower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JOI293d8XUg.html Make sure to check out the Saloon here too… Click here for my website ➜ www.stevessmallenginesaloon.com/ Click here for my Parts and Tools Store ➜ www.amazon.com/shop/stevessmallenginesaloon Follow me on Facebook ➜ facebook.com/stevessmallenginesaloon Follow me on Instagram ➜ instagram.com/stevessmallenginesaloon/ Follow me on Twitter ➜ twitter.com/SteveSaloon

@johnmonroney8614 3 года назад

I use vice grips to hold blade on my trailer ramp in the upright position or Up for travel loaded and closed. Blade is torso height. And i use angle grinder. But there also is an optimal angle for the blade is 30°

@terryiommi311 3 года назад

@@johnmonroney8614 aaaaaaaaaaaaaaaaaaaa!

@superbillybunter 3 года назад

like your vid cheers from down under aus.

@richardbartolo2890 2 года назад

Steve: I bought a a used lawn mower it runs good, But it seems to cut the grass much better when the mower is pulled back wards over the lawn. I brought it into a repair shop they did a full maintenance on it, Plus a new blade and set the blade up to cut the lawn pretty low like I asked them. It runs great and cuts a little better, But it still cuts better when its pulled backwards over the lawn. What's up with that ?

@GeorgiaRidgerunner 2 года назад

Did i detect a bit of animosity torwards another Lawnmower youtuber Taryll fixes all possibly ? I dont watch that guy I cant stand the long running joke on his channel You know those rubber bubba teeth he always wears Its an insult to us southerners The stereotype is southerners all have rotten teeth it isnt anywhere near true

@jhirn2957 2 года назад

I’ve been sharpening with the wrong beer all this time.

@jerkyturkey007 Месяц назад

I always thought the proper beer was Molson Canadian, live and learn.

@mattwaters6987 Месяц назад

How dare you! 😂

@chocolate_chip21 17 дней назад

😂😂😂😂

@mikerichard6962 13 дней назад

Use tequila 😎

@adamjohnson7486 10 дней назад

Hahahhaha 😂 me too, idk (other than Steve being awesome) why I watched this. But first thing I learned is Budweiser is the wrong beer . 😂. Great video

@PaulMFDouglas 3 года назад

I always hit something right after sharpening the blade, never fails.

@medicduckster 3 года назад

Never fails 🤣

@dr.detroit1514 3 года назад

Same luck I have with with new tires. Always right after, I get a flat or a tire gets ripped up somehow.

@g.d.7629 3 года назад

Join the crowd!!!!

@damienmikkelsen6056 3 года назад

Spend an hour making it perfect first 5 feet never fails to find a rock

@tjr8063 3 года назад

I feel ya brother

@AlexanderTheGrateful 2 года назад

I got tired of grinding the blades to balance them. now I just drill a small hole on one side, sometimes I don't have to drill all the way through! much easier, I've got it down to an art, been doing it for years and seems to be the best alternative to just grinding off more material

@SB-bs7uv 3 года назад

Well the other day you taught me how to change my engine oil and how to filp my mower properly so it doesnt get water logged. Today its sharpening and balancing my blade. Thanks RU-vid dad

@StevesSmallEngineSaloon 3 года назад

Great to hear!

@DaddyBeanDaddyBean 2 года назад

If there are any nicks and edges curled down, you can grind the bottom side flat. You're not sharpening it yet, just repairing the bottom so you have a flat surface to grind to. Then go at the bevel side until you get a nice sharp edge. You'll get there a lot faster than grinding only from the bevel side.

@kargo27 2 года назад

Good video, Steve. The nail trick actually does work and the reason why that balanced blade wasn't moving wherever you put is because it IS balanced. If you put an unbalanced blade in there the heavier end will most definitely drop down. All that to say, I still use the plastic conical balancer that you use because you get a front to back and side to side view of where to balance it.

@tonyjr6841 2 года назад

Been using the nail for 40 years. Don't fix it if it ain't broke.

@timrobinson6573 16 часов назад

I worked summers for a landscaping company for 3 years and at the end of the day I spent an hour sharpening a stack of blades with a bench grinder for the next day.

@petepeabody8905 Год назад

Thank you. I've been sharpening my mower blades wrong all these years and never knew it. This will now insure that the grass is being cut properly and that my blades are balanced too. Great job

@StevesSmallEngineSaloon Год назад

You're Welcome...and Thank You...

@Wyogoose 4 года назад

If I may, I would suggest a 40 or 60 grit flap wheel rather than the hard abrasive rock wheel. The cut is much smoother and cooler. If the steel turns blue, any temper has been removed. Thank you for sharing all that you do..

@mikekopisz1227 2 года назад

Yup...cooler the blade is kept while sharpening, the longer the edge will last

@theobserver9131 2 года назад

I have not had much luck using flap wheels on steel, they get worn out in one or two minutes. Maybe I need to buy a better brand.

@mikekopisz1227 2 года назад

@@theobserver9131 use 3M flappers...they last forever

@theobserver9131 2 года назад

@@mikekopisz1227 Cool! thanks. 3M used to be in my home town, Northfield MN!

@TheIronDuke9 2 года назад

@@theobserver9131 Also keep in mind flap wheels come in grit sizes like sandpaper, if you're using a fine grit on rough steel it's going to wear super fast compared to a course grit disc

@pamandjohnmc 2 года назад

I've always used a hand file to sharpen my blades. It takes a little longer, but it's easier for me to keep the sharpened edge straight.

@agtjamesb007 Год назад

Same here. No risk of overheating it and making it brittle, and less likely to remove too much material and un balance it. Unless there are deep ruts chips and gouges, I always do it by hand.

@ep7672 3 года назад

I love that you actually produced examples of the wrong way to sharpen a blade. You are a very thoughtful and generous creator. Seriously, thank you!

@StevesSmallEngineSaloon 3 года назад

WOW! You're Welcome...

@insertgoodname4809 2 года назад

The socket extension trick is *absolutely invaluable!* Best video on youtube!!!

@StevesSmallEngineSaloon 2 года назад

Wow, thanks!

@frankromano5445 3 года назад

I have to say, I have watched a lot of videos by guys and none compare to Steve. He has not once sent me down the wrong road, and always gives complete directions. Including what not to do and why you shouldn't do it. Everyone should like and subscribe to his channel. Thanks Steve.

@StevesSmallEngineSaloon 3 года назад

Thank You...and You're Welcome...

@IamUncledeuce 4 года назад

Steve, once again you saved me a whole lot the trouble and expense. Thank you kindly, now I have the sharpest blades in the neighborhood! It's Miller time. I hoist a brew in your honor.

@TaskerStreete 3 года назад

A friend gave me a great Briggs mower about 12 years ago. I have a small yard, and use it only half a dozen times a year. I've neglected it a bit, and the blades are now completely cactus (due to rocks and uneven territory, and yes, I adjust the blade heights but still cop those rocks, stumps and buried concrete at times). It needs new blades, but at least now, I know how to keep the new blades sharpened. I'm in the process of clearing out those rocks etc. The whole balancing thing, was the most valuable thing I got out of this video, thanks!

@andrewchurchley6779 3 года назад

My old balancing method involved scribing a centre line on the blade and placing it on a knife held in the vise jaws. But since I bought a balancer like yours, I've never looked back. So much more convenient. Thanks Steve. You achieve a great atmosphere on your channel.

@davismize Год назад

Nicely done with the extension!!

@norcoca 5 лет назад

Glad to see your channel growing as fast as it has. You’re a great man with great to the point tips and tricks. Love the channel keep up the great work

@StevesSmallEngineSaloon 5 лет назад

Thank You...

@teddd2009 2 года назад

Useful, honest advise with demos are always winnings!

@markantinozzi8657 9 месяцев назад

That's why I sharpen my razors to

@kenharris6316 Год назад

I used a bench grinder this time. I had the disc off my angle grinder for some reason. It was harder to get the angle right. After a couple of tries, I got it close, and sharpened 2 blades on my riding mower and one on my push mower. What a difference! I replaced the blade on my push mower a couple of years ago after I hit a stump or something and had one if those "rotary tiller" blades like you showed on the video. I have had the riding mower for a couple of years and hadn't sharpened it. Now hen I hit thick grass with either one, it slows the engine down very little.

@andreassjoberg3145 Год назад

Thanks for that tip with the extension for checking balance. I used to balance it on my fingertip to get a rough feel, but this is much better, and I'll use this for when I sharpen my lawnmower blade this winter in preparation for spring. If you do not have an angle-grinder or a bench-grinder, another tip is that there are abrasive bits for your electric drill, if your blade is not too badly damaged, you can use that to sharpen it, and you might even be able to sharpen it without removing it depending on your lawnmower-design if your drill is slim enough.

@joevogelberger9922 4 года назад

Thanks, man. I sharpened my Snapper RER's blade once and used the wall nail method and it looked hokey to me, but I installed the blade and it took awhile but it wiped out the bearing in the mower deck. I'll use your balancing method from now on.

@craigerickson1910 2 года назад

Been sharpening my blades for 55 years. Xlnt video, very clear and to the point. Agree with everything you say except I wouldn't recommend holding your blade while you sharpen w/ angle grinder. Spend a few bucks and buy a clamp to hold the blade to your workbench so you can guide the angle grinder more accurately with both hands. i like the angle it's at for easier sharpening than vertically in a bench vise. Safer and easier to control to get correct angle. You don't mention this but most new blades I've checked have a blade angle of about 22º. Stick with that, they know what they're doing at the blade factory. Nice job comparing the sharpened blade underside with the dull unsharpened one. Night and day. Keep up the good work and have another beer.

@royolstad8532 4 года назад

Those of us teetering on the edge of non-mechanical-ness (!?) really appreciate the critical insights you have for us. I would never have know, for example, that you can only sharpen a lawnmower blade if you're drinking Heinekin beer. That's the kind of hard-won knowledge that ONLY comes with years of experience. Again, thanks!

@ralphs007 2 года назад

I'll have to use your makeshift balancer. Every blade balance tool I looked at,there were complaints that it didn't work for a John Deere lawn tractor blade . Excellent video and thanks for making these videos!

@richardball9116 3 года назад

after watching your video and a couple other ones (not as professional as your video) I got myself a Kokanee and took the front wheel off my wife's bike. I filed a 3/8" lock washer to fit in the 5/8 hole in the blade. I then got another Kokanee and put the blade with the spacer in the hole on the bike wheel axle & wala !! It worked . The heavy side went down. I love watching your stuff. I worked in a saw shop in high school and do all my own maintenance.

@rickrobeAK 5 лет назад

You're a great teacher, dude. Love these videos.

@StevesSmallEngineSaloon 5 лет назад

Thank You...

@jmi7562 3 года назад

This is such a great video! I'd sharpened my blades before but never balanced them (I thought I did, but followed a method debunked in the video). I purchased a blade balancer for $11, sharpened the three blades on my mower deck, and afterwards it purred with hardly any vibration at all. Total time required was just over an hour, including wresting the deck on and off the tractor. I had progressively let the blades get out of balance and never picked up on the increased vibration. Tomorrow I'll properly balance my spare set of blades. Thank you, Steve, for another terrific lesson.

@StevesSmallEngineSaloon 3 года назад

Thank You...and You're Welcome...

@natep1661 2 месяца назад

I just bought a blade sharpener made by all american blade and its epic. I also puchased the blade balancer like you have. The jig allows me to get perfect angle with control.

@vvegas9221 2 года назад

bought the balancer. I have 2 toro 22" blades. I couldn't believe how out of balance they were. hooked up my pneumatic angle grinder & got them back into shape. It was a lot better than using a mil file which took forever.

@StevesSmallEngineSaloon 2 года назад

I agree!

@nathanielpeace2343 4 года назад

Hey Steve, I too have been using an angle grinder for years to sharpen my blades. I have had much better luck using a 60 grit flap disc than a traditional abrasive wheel. The flexibility allows you to better conform to the factory angle, and it seems to run cooler. If you give it a try, I think you'll never go back. Also, if someone doesn't have a bench vise, as safer alternative may be to use a large "C" clamp to hold the blade on a secure square post or benchtop, etc. I have used this method several times when no vise was available.

@bmead144 4 года назад

Excellent 👍

@jafinch78 3 года назад

I've been using the 36 grit flap discs. I like the fancy little balancing tool. That looks like a wise investment.

@robertpeterson2825 3 года назад

+1 on using a flap disc. I prefer these for all grinding tasks vs a standard solid abrasive disc. As Peace suggests, once you try a flap disc you will never go back. Available in bulk from ebay sellers.

@alanshaw6161 2 года назад

Steve, You have one of the best and most useful channels on RU-vid. I grew up on a farm and every kind of engine imaginable and I still learn tricks and tip from your videos. Keep up the good work and I will keep watching and liking all your videos. Also, you were correct Heineken was the only extra tool I needed this time.

@StevesSmallEngineSaloon 2 года назад

Wow, thank you!

@mikeymike758 2 года назад

As long as it's real beer, then great. My go to is PBR. 🤣

@masterbondofox8982 2 года назад

Seriously Steve, thanks, I've been needing this information. I'll be sharpening and balancing my blade as soon as I can figure out where the oil on my spark plug is coming from. Mower's only a few years old!

@outdoorfreedom9778 2 года назад

Glad I watched this vid, I learned something. I have no problem with sharpening the blades but having an extension on the bench is a good idea to keep checking the balance. My problem with the blades is the ears that eject the grass, weeds and crap in my case, tend to wear out then break off. If you happen to have a welder handy it's easy enough to hard face this area. After hard facing you also need to balance the blades. If the blades are just a bit off you may not feel it but the BEARINGS know all about it!!

@fassay 5 лет назад

I like your balanced approach Steve. Well done as always.

@StevesSmallEngineSaloon 5 лет назад

Thank You...

@steveolsted6378 2 года назад

I used to use an angle grinder. It has issues, like hot spots, trying to make a flat surface with a curved wheel etc. I since found a much better power tool to do the job. It's faster, Sharpens better and you can still be drinking the beer. Try using a belt sander. Depending on how dull the blade is I use a different grade of sand paper. Works really, really good.

@georgebonney90 2 года назад

I'm fixing up an old riding mower that my uncle gave me and this channel has helped me out tremendously, thank you sir👌

@StevesSmallEngineSaloon 2 года назад

Glad to hear it

@petestrickland2181 4 года назад

That was awesome. I’ve been doing the nail in the wall thing because I didn’t know the balance tool even existed. Great video!!!

@StevesSmallEngineSaloon 4 года назад

Glad it was helpful!

@BlaubartMT 5 лет назад

After watching your video, I realize now what I've been doing wrong when sharpening my blades. My tool of choice has always been hard apple cider. I'll have to try the Heineken to see if that works better.

@StevesSmallEngineSaloon 5 лет назад

Right on Buddy...

@lesaboo4740 5 лет назад

LMAO

@bobbyhempel1513 5 лет назад

Heineken will no longer get any of my money they are anti straight as in they're the sjw types that think that if you're not homosexual or transexual you are a bigot

@MrTheHillfolk 5 лет назад

@therealnightwriter Yea omg all the inported beers here are skunk piss. When i was in germany everything rocked. One guy said try a budwieser and im like i didnt fly 8hrs to have a bud.....it was excellent, not the swill here. All the imported stuff here in the states is trash.

@paulg444 4 года назад

dont feel bad, its a rookie mistake we all have made.

@longlowdog 5 лет назад

Only one little thing you didn't mention. Clean your blade with a wire brush before you start balancing. Your blade will not be in balance if the crusted grass and flaky paint come off when you restart the mower.

@wadsworth120 5 лет назад

Good point

@bigjoe2458 4 года назад

I always do that first before grinding

@artsmart07 4 года назад

wouldn't that be common sense? haha

@artsmart07 4 года назад

@@onekittyhawk63 hahahahahaha..

@bmead144 4 года назад

@@artsmart07 common sense is anything but common!😉

@wildberj Год назад

Hello Steve, thanks for the video. I also use a bench grinder and then put the blade in a vise and run a flat file on cutting edge and then use a sharpening stone about 4 passes each. Then recheck the balance. Have a great day

@naradomadath2926 2 года назад

Steve just wanna say continue the great job you have been doing... God bless... and thank you for the support you provided myself and others over the years.

@StevesSmallEngineSaloon 2 года назад

I appreciate that

@marshallbronne2142 3 года назад

I have a balancer, but I never knew about using an extension. Really cool. You know your stuff for sure. Thanks for all the great vids. I've learned a lot from them.

@StevesSmallEngineSaloon 3 года назад

Happy to help!

@josephogle2015 5 лет назад

never thought about the 6in extention trik. thanks steve makes perfect sence!

@StevesSmallEngineSaloon 5 лет назад

Right on Joe..

@robc.5745 2 года назад

Good video Steve,I like to sharpen mine every season,I use the Oregon Gator blades, They really turn the clipping to good mulch ,And I sharpen them with a flap wheel on my grinder so as not to take too much off the blade and over heat the steel.

@mongolioose 4 года назад

This channel is an absolute JEWEL, Steve. Thank you with gratitude.

@StevesSmallEngineSaloon 4 года назад

Wow, thank you!

@phil1shea 5 лет назад

Clear and complete. Love the driver extension balancing trick!

@StevesSmallEngineSaloon 5 лет назад

Thank You...

@brianjohnson217 2 года назад

Hi Steve after watching your blade balancing method I was impressed with the balancing jig that you used .Being a retired engineer I've made one , works a treat . Took two cans of lager to complete the jig. Love watching your small engine videos, very informative and entertaining

@StevesSmallEngineSaloon 2 года назад

Cool, thanks

@byronjohnson4268 2 года назад

How did you make it Brian

@Joe-hp8kb 2 года назад

After you drink the lager, how do you make the jig?

@mikeymike758 2 года назад

Just make sure your bench or table is level. Your eyes can play tricks on you if the bench or table is not level. Being a retired mechanic/machinist. 😁

@brianjohnson217 2 года назад

@@mikeymike758 I place it on the lathe bed which know is level in both directions

@carlmetzger3971 2 года назад

You have one of the best yard equipment repair and understanding sites ever! I bookmarked many of your other videos and reference them often. Thanks brother! You are the best.

@StevesSmallEngineSaloon 2 года назад

Right on Carl! You're Welcome...

@charlesmckinley29 4 года назад

Thanks for the balancing tip at the end. I will probably order an actual balance this year.

@Raggzzaug11 3 года назад

I use a C-clamp outside on a heavy table and a angle grinder flipping it over for each side and take off rolled metal from the grinder with a file after checking the balance.

@paulworkman5755 3 года назад

Great tip on balancing (using the extension method. But, regardless of how one does it, ya might mention being sure there is no buildup of grass "smear" on the blade. I use a wire brush to quickly knock off any buildup there might be.

@MeltingRubberZ28 Год назад

Good idea. Easily could throw the balance off. Thanks for the tip!

@mackmay5442 Месяц назад

Great video, I learned a lot about sharpening blades that I did not know, including which beer is best for sharpening blades.

@Pharmgdb 2 года назад

Thank you for the advice on balancing.

@StevesSmallEngineSaloon 2 года назад

You're Welcome...

@northidahoguy5549 5 лет назад

That’s some really good stuff!!! Going to sharpen up mine tomorrow. Thanks!

@StevesSmallEngineSaloon 5 лет назад

Thank You...and You're Welcome...

@owa2533 Месяц назад

Very informative, not boring at all. Thank you.

@StevesSmallEngineSaloon Месяц назад

Glad you enjoyed it!

@cmthesame943 3 года назад

Thanks for your videos. As a recent widow, I have found much useful information in them. Your clear {despite the beer- or maybe because of it?!? (smile) } explanations are appreciated. I am not totally ignorant in the use of tools and/or making repairs, but there are just some things that my husband took care of and now I will need to deal with them, so is nice to get some knowledgable advice. It is helpful when you explain "something could be done this way", BUT "here's why you might not want to do it that way" . That information that is very useful and I'm sure keeps a novice or two from making a mistake. Also showing ways to do something if one doesn't have access to exactly a certain tool, how one can substitute with something that may be available. Thanks again & keep putting out those videos!

@StevesSmallEngineSaloon 3 года назад

Thank You...and I am sorry for your loss...

@patrickmertz2426 3 года назад

Not boring at all Steve, just informative, logical and helpful information as usual.

@StevesSmallEngineSaloon 3 года назад

I appreciate that!

@rico1319 5 лет назад

I thought you were going to balance that blade on the Heineken bottle! LOL! Thanks 👍👍👍😎🇨🇱

@StevesSmallEngineSaloon 5 лет назад

lol! Right on...

@vincentrobinette1507 4 года назад

That actually sounds like a good idea!🤣😁😂

@foldingchaise8387 5 лет назад

Thanks Steve Out, I love your videos, I love beer too !!!! Keep them coming !!!!

@StevesSmallEngineSaloon 5 лет назад

You're Welcome...and Thank You...

@sethfoulk6990 2 года назад

I never thought of the whole balancing it on something round,like the example, 6 inch ratchet extention! Good job Steve! Thank you!

@StevesSmallEngineSaloon 2 года назад

Glad to help

@vintagefurness 2 года назад

Thought I knew how to sharpen a blade. Bought a balancing tool, some Heineken NA, and my angle grinder. Awesome info. Worked great. Thank you.👍

@StevesSmallEngineSaloon 2 года назад

You're Welcome...

@nw843x 4 года назад

Good video as always. Try using a roloc disk instead of the angle grinder if you have one. It does not heat up the blade as much as the grinders do.

@Tony_Atk 5 лет назад

Always used the extension trick on all my blades, works perfectly.

@StevesSmallEngineSaloon 5 лет назад

Right on...

@kennymacraild8290 3 года назад

Fab video as ever Steve. Always clear and making it simple for village idiots like me to find my way round servicing my own garden machinery. You’ve become my first port of call when I need to know how to do something, actually second if you count the fridge for a beer first! Keep up the great work

@StevesSmallEngineSaloon 3 года назад

Right on Kenny!

@jeffmays3608 5 лет назад

Just got my garden tilled using the bent mower blade system n saved a lot of money I was going to put towards an actual tiller. Thanks Steve.

@kramnull8962 5 лет назад

You must be like me, I need to make a video of the proper bending procedures... My lawn is unlandscaped, so you remember the old Gillette commercials "Gotcha"... I get surprised every now and again... Or the good ole GROWING STUMP after it rains routine, I hate that one.

@captainthunderturd8442 4 года назад

I just tell the wife I buried her credit cards out back and turn her loose.

@kramnull8962 4 года назад

@@captainthunderturd8442 That's one way to get the garden plowed every spring :)

@akquicksilver 5 лет назад

I use a flapper disc, it works great, moves metal quickly, but is more forgiving than a disc. Great video.

@StevesSmallEngineSaloon 5 лет назад

Right on...

@heavymechanic2 5 лет назад

I started using a #80 flap disc this year and it generates less heat than the fiber and does a great job to dress the edge.

@markbradley6993 3 года назад

Hi Steve Came across you channel about two years ago , it’s brilliant you make the most complicated tasks easy. Well done and keep the faith. 👍

@StevesSmallEngineSaloon 3 года назад

Thanks and welcome

@ghopkins25 2 года назад

Great to have a link for the balancer. Better than any RU-vid commercial. Get the right tool for the job. Thank you.

@StevesSmallEngineSaloon 2 года назад

You're welcome!

@jhooton75 4 года назад

Great tips on balancing the blade. I've always just put a small screwdriver in my vise and put the blade on it (like the nail in the wall trick). I'm going to try the ratchet extension trick next time.

@rayndawg7181 2 года назад

Same here, the screw driver shaft I use is about is an eighth of an inch in diameter- no thicker. Been doing it for 45 years, never a problem. I think the way he suggest, could be problematic. I also sharpen by blades on a bench grinder as I seem to be prone to hitting ever rock that pops up in my lawn, a spill over from the wife working in the garden, and boarders I think. 🤔

@pauljs75 5 лет назад

This can also be done with a straight file, if you've got something to clamp the blade to a table with. It works surprisingly fast, provided the whole cutting edge isn't dinged to the point of having to re-grind the whole angle into it. If that works as well as it does, then power rotary tools may need a light touch in comparison or you're just wasting the metal on the blade.

@PS-rr2jt 2 года назад

I’ve always used a file and try to touch it up every few cuttings. It only takes a few minutes.

@fourcubed47 2 года назад

@@PS-rr2jt Agree, two to three times a year touch it up, takes minutes. I count the same number of strokes on each side and it stays balances.

@gulfstream7235 Год назад

Takes all of 5 minutes to do a blade manually with a hand file, much better results truth be told...

@devinbraun1852 Год назад

I agree. Unless you have a blade that has been neglected or damaged in strikes, you can hand sharpen a mower blade with a file in just a few minutes, often as fast as a grinder, with much better results. . Since you are not hogging of a bunch of material with a grinder, there is rarely the need to balance. I can imagine people who are not experienced hand sharpening maybe being intimidated and thinking it’s easier to just put it to a grinder, but once you are proficient, it’s the best method in my opinion.

@35Geneva 2 года назад

Heineken is the only beer that will work! That was my problem. Switching from Bud to Heineken did the trick. Blade now as sharp as new. Thanks for the great videos Steve.

@StevesSmallEngineSaloon 2 года назад

Good to know!

@leonardrose7866 2 года назад

Thanks for all the help that you & Buckin Billy produce ..really helping out the WV boys 👍

@dukeman7595 4 года назад

I like the ratchet extension for balancing, nice trick.. Thanks for the tip..

@StevesSmallEngineSaloon 4 года назад

No problem 👍

@kimberlymazzitelli8644 3 года назад

Steve is a single g irl s friend! Thanks Steve, dad never showed me how to change blades on my mower or air filters need to be cleaned an don't get me started on spark p lugs an carb's, I knew what they are but I'm supposed to do something with them? Your videos are easy to follow, understand an I can even get behind you on the idea that small engine repair builds a thirst that only a cold brew can quench ;)

@StevesSmallEngineSaloon 3 года назад

Right on Kim! Thank You...

@martinglommen9888 3 года назад

Absolutely good videos! Excellent teaching style and useful content. If you have not already done so, please do a video about refreshing a two cycle or four cycle engine that was improperly stored and then remained unused for many (10) years. Steve, you are a good man and deserve every good thing that comes your way. Keep up the good work!

@StevesSmallEngineSaloon 3 года назад

Great suggestion!

@meangreen7389 Год назад

It could be -10° outside but your delivery manner is very toast-y as evidenced by the lotsa fuel on them ‘der shelves. Great vid as always.

@munched55 5 лет назад

Thanks Steve. Have a fresh looking Toro I got with the house when I bought it. I better have a look at the blade as spring is around the corner.

@StevesSmallEngineSaloon 5 лет назад

You're Welcome...

@raphaelbussy6482 3 года назад

Was doing everything right until I looked at my bench and saw that “it” wasn’t leveled and was grinding both side back and forth… lesson learned. Thanks Steve!

@les13robinson 3 года назад

Brilliant! Great idea for the balancing. Thanks, Steve. Much appreciated! Cheers, Les

@StevesSmallEngineSaloon 3 года назад

My pleasure!

@josephbuzzetta-re7mv Год назад

Outstanding! Steve your tips and instructions are the best on RU-vid!

@StevesSmallEngineSaloon Год назад

Thank You...

@paulwharton1850 6 лет назад

The balancing tip with a 6 inch extension socket and how much off centre the blade is......is pure genius. Many thanks......all the way from London !

@StevesSmallEngineSaloon 6 лет назад

You're Welcome...

@mikeymike758 2 года назад

Great video on sharpening the blade. But one important thing that you forgot/failed to mention when checking the blade balance with a cone balance or socket extension, is to make sure your bench or table is level. The eye will foul you with an out of level bench or table. Cheers,

@canuck.2024 8 месяцев назад

another great video,like the balance trick! i like using a 40 grit sanding pad myself no chance of taking to much off. thanks for the tips!

@andydorman2119 Год назад

Thank you for the balancing lesson. Once I LEARNED about balancing, I tried two other ways. With the nail in the wall approach, the friction (however small) between the nail and the blade will stop the blade from rotating if unbalanced. The bearing/magnet tool is unparalleled accuracy. The key is the patience of the person balancing it. The blade is ONLY balanced when it stops moving LEVEL regarding the bearing way. That's the method I use. Patience. But it makes the difference between a mower that will last 10 or more years vs a mower that will last 5 or less. And: it's easier to start, does not bog down as easy, runs higher RPM, and fuel lasts longer. The only vibration you feel through the handle is the engine popping. Also important to mention that cleaning the understand of the deck is critical for correct air flow to not unnecessarily bog the blade and to mulch correctly.

@isidroizazaga2786 5 лет назад

That video help me a lot because I use my lawnmower everyday and I have to sharpen .

@StevesSmallEngineSaloon 5 лет назад

Thank You...

@bladder1010 4 года назад

I've got a good quality mill file, and that does a good job for me. Less mess, noise, etc.

@michaeltaylors2456 2 года назад

Good ole flat bastard…. file is an unappreciated tool

@raystanczak4277 2 года назад

I always sharpen with files and stones. I’d just remove dirt with a couple of light passes with a grinder so I’m filing clean metal. A grinder works fine, but you have to be careful not to overdo it, and don’t let the blade get hot.

@bladder1010 2 года назад

@@michaeltaylors2456 File is the most satisfying to use. Creates a very spicy edge.

@jesuscat3884 3 года назад

Hi Steve, I've seen a few of your videos so far and it's been really helpful in fixing my 4 cycle lawnmower. Wanted to say thanks!

@StevesSmallEngineSaloon 3 года назад

You're Welcome...

@cliffordbowling8969 4 года назад

Thank you for all your help in your posts , saves us a lot of money and time.

@StevesSmallEngineSaloon 4 года назад

Our pleasure!

@jr4750jr 6 лет назад

I use to use this method for years and it does work very well but recently I started to use my Belt Sander 30 grit and because it's belt is so flat I get a better and smoother result. Placing the blade in a vice and keeping the belt sander flat at the correct angle 30 degrees, I get a very professional result by this procedure.

@lennybella1666 5 лет назад

@chrisferrell6978 5 лет назад

It will do the job just fine

@hondo-pr4tu 4 года назад

You got a lot of knowledge man. Keep um coming. Steve's university of small engine .

@StevesSmallEngineSaloon 4 года назад

Thank You...

@Benmelech 2 года назад

👏👏👏👏👏 absolutely love your no nonsense and extremely thorough instructions👍👍👍

@StevesSmallEngineSaloon 2 года назад

I appreciate that!

@altonrowell613 Год назад

Just got a Hustler Fas trak 54 o turn. Man what a difference.

@lukep6017 5 лет назад

Excellent VIDEO content. Thank you

@StevesSmallEngineSaloon 5 лет назад

Thank You...and You're Welcome...

@RandyWBrown 5 лет назад

I already had this NAILED 😉

@brucehampton1545 2 месяца назад

Nice video on shapeing blades and balancing. Thanks Steve.

@hmroa3056 4 года назад

ALWAYS the best information! Thanks Steve.

@StevesSmallEngineSaloon 4 года назад

Thank You...and You're Welcome...

@raymondrobinson6696 3 года назад

I was thought to use a pocket knife basically just like your socket extension on the cutting edge. Good point on making sure blade is clean form comments.

@jimshorts5970 2 года назад

Huh?

@PJRII 4 года назад

Steve, thanks a million for all the great info. I was able to rebuild the carburetor on my rototiller and I'm no mechanic to say the least. I'm looking to replace a deck belt and maybe blades on my JD x300 mower, just trying to get brave enough. My question is: can I replace the beer with bourbon? Bless you Steve, best regards, Pete in Maine