Best Way to Paint Edges (without tape!)

Подписаться 205

Просмотров 294 тыс.

50% 1

Visit www.annadventure.com for more!
This is the easiest way to paint wall edges without having to tape walls.
Shur Line Edger: www.sears.com/shur-line-edger-... (We got our at our local Ace Hardware store but they don't seem to sell it online).
I spent hours taping my ceilings before this and the paint would still bleed under it because all my walls are textured. Thanks to my father in law, I learned about this edger and it has saved me SO much time.
Make sure you are careful when dipping it in the paint. Try not to saturate it with paint and always make sure you raise the guides so you don't get paint on them. Also make sure the pad hasn't slipped too far forward or it will get paint on the adjacent edge. Happy Painting!
This post is not sponsored.

Опубликовано:

12 сен 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@Diva9000x 8 лет назад

I bought the Shur Line edge painter after watching your video. It worked great! I used another RU-vidr's technique of loading the pad with a brush. You have more control over the amount of paint on the pad. I figured out how to apply the paint to the corners without getting it on the ceiling and the baseboards. You basically roll it to the corner and stay there for a few seconds before you move the pad away. Then you glide down the other wall and rest in that same corner for a few seconds then pull the pad away. I was painting an accent wall. My corners are perfect and I didn't use an inch of tape. Thanks for your video. It helped me a lot.

@Elviretube 3 года назад

Yep, that's what I do, load the pad with a brush, works beyond terrific. Just make sure that you clean it immediately when done, or just drop it in a soapy water bucket, the longer you wait, the harder to clean. I have used the pads over and over and over!

@oithoson 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R1pB56FoSiU.html Chúng tôi đến từ Việt Nam

@ruben85374 6 лет назад

Wish I watched this video before I painted my sons room. Tape takes a long tine to prep and yes paint still bleeds thru. I will most def get me one. Thank you much.

@adriansandry2783 4 года назад

If you know what you're doing paint never bleeds under tape. Just google it. All the best.

@radicalaccounting 7 лет назад

I love, love this tool. Been doing so much painting lately I've wondered why I'm not professional quality yet? It's this thing that changed my life. I painted 3 rooms in under 3 hours with this thing. Not only does it edge perfectly, but for over the doorways and windows in this short room, it's 3 strokes, and done. Only thing. I have a hard time with "gently" while painting, so I have a bucket for the paint, and a tray with just a small amount of paint for this thing only. You do a good job of explaining that you have to protect the edger part from paint.

@tarek3702 7 лет назад

radicalaccounting hey i so this tool really works. so it really helps with edges. because the tape peels off sometimes with paint.

@adriansandry2783 4 года назад

This kind of paint pad is best loaded using a brush so you can keep paint away from the rollers.

@chrissy212e 4 года назад

Gosh I've just googled this great idea for novice D.I.Yers thank you. Just looked on Amazon UK and seen the Pro version which is much more expensive but this is a American brand so the price difference is expected.

@williewilkins7253 7 лет назад

amazing!!! cant wait try this...

@popcorn4465 4 года назад

Very nice demo thank you

@Straightbangin1979 2 года назад

They have these in all different brands. I've been using one since I was a kid my grandfather showed me how cool they are. It's called an edger they've been around since like 1950 LOL

@nonokayakjack 7 лет назад

May be stopping by Home Depot for that soon!!

@rosemary4802 3 года назад

Thank you 😊

@joaosena546 2 года назад

Hedge veio parafasilitar à pintura é uma revolução Pará orecorti que e o acabamentos topi de mais.

@JuanCardenas-kd2fd 6 лет назад

EXITOS GENTE

@keen2b 2 года назад

Try'ed this gadit, If the wall paint is thick it makes a mess!!

@patrycjuszrosengart2845 7 лет назад

where can I get it ?

@renostubbs8504 2 года назад

Did you time yourself?

@sarahpoulin4303 8 лет назад

How do you get it to go in the corner? Specifically when two walls and the ceiling meet? I am having trouble doing it.

@Annadventureblog 8 лет назад

+Sarah Poulin Hey Sarah. Thanks for commenting! When I painted, I carefully went up to the ceiling. Its been a while since I posted this and painted but I recall just using a small paintbrush to touch up that top corner (like the small brushes you'd use in art class to paint a picture). When using the edger, be careful to not over dip it into the paint so the paint doesn't get on your ceiling/other wall. Hope that helps!

@keen2b 2 года назад

Do it properly 1inch brush take your time!! There are no short cuts todo this job right!!

@Thinkableness 7 лет назад

This should make my job much easier.

@witczak 5 лет назад

...until you get paint on the little wheels. And you will. At that point you'll be cursing this gadget because now you have an adjacent wall to touch up, a gadget to clean, and wait to dry. Learn to cut in with a brush instead.

@johnwelk6675 4 года назад

Or, just like when using a brush, you be very careful. If you do this you can avoid getting paint on the wheels.

@lavatube11 4 года назад

I applied a little silicone spray with a tiny brush (spray on brush, apply to wheel), and that seemed to help the paint not stick to the wheel. Or maybe I was just very careful.

@koltred 2 года назад

@@johnwelk6675 if you have to be very careful, then just use a brush. i thought that was the point of this device sir

@jonnybravo2418 8 лет назад

never leave your roller pad dry. keep wet when cutting in

@lavatube11 4 года назад

Jonny Bravo , I always put the rollers or pads in a ziploc plastic bag, and that can keep it from drying out for days, if needed.

@sashashavit8179 8 лет назад

did you cut out a bit from the pad so that it doesn't bleed paint?

@edjucat 8 лет назад

I have used this tool. No, you don't have to cut the pad, it comes that way.

@jakeerlitz8194 6 лет назад

My pad did not come like that and ended up making a mess...I guess back to home depot to find these pads

@HELLISHHANDZ 4 года назад

I think that was custom cut from how it looks im going to cut mine myself

@577buttfan 4 года назад

Na,best way is too just use a quality stiff bristle angle brush and learn the right way.

@johnwelk6675 4 года назад

There's more than 1 right way my friend. As long as you get the results you're looking for, you've done it right.

@koltred 2 года назад

@@johnwelk6675 for productivity and painting as a job this is not a wise option. there is no learning curve to this device meaning you get what you get with it, no improvement. for a homeowner, its perfect because they arent wanting to learn to paint fast. for a person on the job they should never be using this device. they will run into popcorn ceiling where they cannot use this along the top cutins and their job will be significantly longer because they have not been using a brush.

@Crystal-be9ze 5 лет назад

Can I ask why you opted not to use it around the bottom?

@Crystal-be9ze 5 лет назад

Mike Bell ok thank you

@oongi 7 лет назад

The older model of the edger was way better, the new one is not well constructed and leaks on the wall/ceiling to much.

@ansvel 7 лет назад

Why do you use tape at the bottom if you can use this tool?

@Zen999the 7 лет назад

The wheel need something to contact, like ceiling or door frame. The molding is too thin.

@slotguy81randy62 3 года назад

Never dip them. Use brush to add paint. Literally paint the pad and you’ll get great results every time

@runski802 3 года назад

The edge tools suck. They get paint all over the edge you dont want paint on!!

@CatholicBuddha 5 лет назад

Holy fuck the wheels go back thank you so much

@naomicarroll3641 2 года назад

Read the instructions on the package - it’s clearly printed there so you don’t get paint on the wheels

@oithoson 2 года назад

Ở Việt Nam chúng tôi chưa có những thứ nàyru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R1pB56FoSiU.html

@jasonisom442 Год назад

Good luck using this where popcorn ceilings meet the wall. A good brush and a steady hand are the best way to cut edges in.

@SPQR-fn8cp 7 лет назад

using this good but makes you slow painter

@briandavis8939 2 года назад

That’s cheating through it away use a paint brush

@mariaortega990 6 лет назад

Don’t buy this edger it is pure garbage!

@toddjackson9710 6 лет назад

I found it doesn't get right into the corners and you have to be right onto keeping those wheels clean otherwise you get painted line on the wrong wall.