Тёмный

Shur-Line Paint Edger: The Secret to a Perfect Paint Job 

Handiest Pro
Подписаться 336
Просмотров 133 тыс.
50% 1

Shur-Line Paint Edger Amazon Link: amzn.to/3ZWSCsk
This is a video on How to use a paint edger, specifically the shut-line brand. Using a Shur-Line Paint Edger is one of my favorite tricks to get professional-looking results while cutting in with less effort. It's a tool that helps you paint crisp, clean lines without using masking tape or any other materials. It has a small wheel at the edge of the pad which keeps the paint from going outside the line you want to paint. There are some tricks to getting the best results with the tool, but once you get used to it, you can quickly create smooth lines on any wall or surface.
Yes I'm an affiliate and I may or may not receive commissions when you click on my links and make purchases. #DIYPainting #

Хобби

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 62   
@alwaysbelieve45
@alwaysbelieve45 7 лет назад
Thank you for the tips! I made big mistakes last night and your video explained exactly what it was...you saved our room!
@Handiest-pro
@Handiest-pro Год назад
Thanks for watching. Glad it helped so long ago. 😆 I didn’t even think people would really watch this. It’s amazing how many people have over the years.
@doreennewman7182
@doreennewman7182 3 года назад
This video was just what I was looking for ! I have the exact textured walls, thanx soo much !!!!
@Handiest-pro
@Handiest-pro Год назад
You’re welcome. Thanks for watching and the comments.
@jonna-intuitivehealer4938
@jonna-intuitivehealer4938 5 лет назад
thank you! I'm glad I read the comments! I'll look for your next video for the edger you like better - I'll be purchasing later today!
@1hjehje
@1hjehje Год назад
An excellent video. Thank You!
@Handiest-pro
@Handiest-pro Год назад
Thanks for watching. Glad you liked it.
@c-lomx9008
@c-lomx9008 5 лет назад
Why I'm just finding this tool I needed this last week paint two house I hate tapping off it more messy and time consuming than anything. Caulking the tape is good to, but I like this ideal better.
@Handiest-pro
@Handiest-pro Год назад
I haven’t tried caulking the tape.
@c-lomx9008
@c-lomx9008 Год назад
@@Handiest-pro keeps the paint from bleeding over the tape it's too time consuming.
@davidwm
@davidwm 6 лет назад
Thanks for sharing this video with us Andrew, it was very helpful.
@Handiest-pro
@Handiest-pro Год назад
I didn’t realize so many people commented on this video. Glad it helped.
@pichoags7058
@pichoags7058 2 года назад
FUNCIONA MUY BIEN!
@rkivuti
@rkivuti 2 года назад
🙏🏽 thanks. Great explanation.
@stevendimakos9211
@stevendimakos9211 6 лет назад
Good demo 👍
@Handiest-pro
@Handiest-pro Год назад
Thanks. It wasn’t really but I’m glad some people found it useful. 😁
@wayneblalock87
@wayneblalock87 7 лет назад
Excuse the off color reply, enjoy the how to videos, thanks for sharing your experiences.
@peterbarlow8912
@peterbarlow8912 Год назад
Don’t dip the pad. Use your brush (2 1/2 square cut sash) to apply paint to the pad, brushing off the edges not on. Earlier versions of this edger had teeth on the inside of the pad so you could adjust how close it cut. This is particularly useful when cutting to a ceiling where you want to stay short so as not to get into wavy drywall jointing leaving a wavy cut line. Hopefully the ceiling paint done first filled the corner and came down the wall a little. Top down and Far to near are long standing painting rules
@Peter-wc4kr
@Peter-wc4kr Год назад
Dipping in the bucket of paint correctly so not to get any on the wheels could be harder than using an edge trimmer paint brush.
@Handiest-pro
@Handiest-pro Год назад
Sounds like this video might not be for you. RU-vid doesn’t always get the targeting right or maybe I got the title and description wrong. Anyway, thanks for watching.
@doobiedoghousewilson
@doobiedoghousewilson Год назад
Don't load it that way. Get a brush and paint the edger instead of dipping it. Much neater.
@sueu.9674
@sueu.9674 4 года назад
One of the wheels on my edger stopped rolling due to paint drying on it. I am hoping it will work anyway.
@Handiest-pro
@Handiest-pro Год назад
That’s happened to me. On mine the wheels piped out so I could clean it.
@lucky9381
@lucky9381 5 лет назад
This is the most frustrating video ever. Nearly 9 minutes and all of that amounts to about 30 seconds of the tool actually being used.
@jonna-intuitivehealer4938
@jonna-intuitivehealer4938 5 лет назад
I just pushed through the video until I saw some action. lol - now I'm looking for the next video on the tool he likes better.
@yvonnemariane2265
@yvonnemariane2265 Год назад
Hi again! I think you should come to this comment section and "like/love" every praising comment, a) cuz it's nice even years later, b) you may trigger a few to come check out your latest content!
@rickyrick9328
@rickyrick9328 3 года назад
Don't dip it. Load it with a paint brush...
@Handiest-pro
@Handiest-pro Год назад
Haven’t tried that.
@kinggeorgewashington
@kinggeorgewashington 7 лет назад
Thank you Andrew! I just subscribed. I want to to try that. Does it work well where the ceiling and walls are two different colors?
@kinggeorgewashington
@kinggeorgewashington 7 лет назад
Thank you. I just did a DIY paint job. I wish I had seen your information earlier. I'll bet if you focus on certain types of common problems people can overcome with tolls you will be a great success here. Have a great day brother.
@la196
@la196 Год назад
It does work well with 2 different colors. Just let the one wall dry before doing the other wall. Someone suggested applying the paint onto the Shur-pad with a paint brush assuring to not put too little or too much. It worked perfectly for me. Just need to be patient and not in a big rush. It's worth its weight in gold to not have to use tape or the frustration for those that have problems cutting in and not keep a steady straight line. Slow and steady wins the race:)
@deanskidmore4495
@deanskidmore4495 11 месяцев назад
wood chip paper evil! lol
@jonweigand3712
@jonweigand3712 6 лет назад
Have tried these tools in the past, and always run into the same problem, no matter how careful I am, and that is getting paint on the rollers/front edge, that ultimately ends up with paint on the opposite edge.
@Handiest-pro
@Handiest-pro Год назад
Yea, I found that super frustrating.
@wayneblalock87
@wayneblalock87 7 лет назад
would you paint the wall please, to much chatter. thanks for your effort.
@Handiest-pro
@Handiest-pro Год назад
Yea. This was the first time I had ever recorded myself. Super nervous. Thanks for the comments
@chuckbriel5948
@chuckbriel5948 Год назад
Use a cut in brush much easier.
@Handiest-pro
@Handiest-pro Год назад
For some people it sure is, others not so much. That’s why they make these things. Thanks for watching and the comments.
@lennonjames3871
@lennonjames3871 Год назад
35+yrs painting an I think that thing is junk.ill stick to a 3" brush 😂👍
@Handiest-pro
@Handiest-pro Год назад
Yea, with 35 year’s experience I don’t think you’re the target market for this product.
@riknraknanafefifo8295
@riknraknanafefifo8295 6 лет назад
Your paint dryers already
@Handiest-pro
@Handiest-pro Год назад
Ok?
@dave1secondago
@dave1secondago 7 лет назад
the lines seem all wavey , are the wheels bent or somethink. why not just use a brush its junk I think
@Handiest-pro
@Handiest-pro Год назад
Yea. Not for everyone. Thanks for watching and the comments
@dave1secondago
@dave1secondago 4 года назад
quicker too use a brush , just more junk in your box
@Handiest-pro
@Handiest-pro Год назад
For some sure. Others that don’t want to spend the time to learn just for a home project, it’s easier to use one of these.
@Tommaniscalco1976
@Tommaniscalco1976 3 года назад
Learn how to cut with a brush properly . get a laser and practice cutting lines.
@Handiest-pro
@Handiest-pro Год назад
That’s a good idea. Most people don’t want to spend the time learning how to cut in just to tackle a home project though.
@diddebop9890
@diddebop9890 7 лет назад
I'm a painter.. please stop.. that tool is a joke
@mutton_man
@mutton_man 7 лет назад
Looks like it does a really nice straight line to me.
@Joe-tl8cu
@Joe-tl8cu 6 лет назад
Why ....Is it a joke ?
@CGphotoOp
@CGphotoOp 6 лет назад
The results speak for themselves
@Zipfreer
@Zipfreer 5 лет назад
danny boy is just mad because it makes him obsolete you save big money not hiring someone like him!
@kylielewis6021
@kylielewis6021 5 лет назад
danny boy This is a HORRIBLE product! I have tried it previously and the paint seeps in the the edges of the paint sponge gets on the wheels and smears paint on the opposite wall, framing or Ceiling (in my case)😡 I agree with you
@beelzebobtheinnocent1659
@beelzebobtheinnocent1659 7 лет назад
way way wayyyyyy too much paint. Load only the first 1-1 1/2 " from the wheels otherwise you end up with a paint line . NEVER have the whole pad filled with paint
@rodreeves8076
@rodreeves8076 4 года назад
I’m wondering, if the manufacturer (Shur-Line) only wanted you to paint the first 1-1/2”, then why would they make such a wide pad to begin with?
@roberttitus3406
@roberttitus3406 4 года назад
Must be joking! This think is not needed by real painters. Where is the skill? Dipping into bucket
Далее
10 Useful BEGINNER Tips for Using a PAINTBRUSH!!
10:26
МАЛОЙ ГАИШНИК
00:35
Просмотров 508 тыс.
Iran launches wave of missiles at Israel
00:43
Просмотров 1,4 млн
Учёные из Тринидад и Тобаго
00:23
Shur Line Paint Edger Pro Review | Does It Work?
7:30
Просмотров 433 тыс.
How To Paint A Room FAST! | How To Use Paint Edgers
7:13
How To Argue (But Not Fight) With A Narcissist
13:00
Просмотров 1,9 млн
How to Paint a Room In a Weekend
30:38
Просмотров 325 тыс.
How To Paint Trim and Baseboards
11:23
Просмотров 246 тыс.
The Top 3 Ways to Paint a Door
6:57
Просмотров 15 тыс.
kart com  pallet de madeira 👆 #shorts
0:12
Просмотров 6 млн
😧КУПИЛ НИССАН И УДИВИЛСЯ!
0:17