Тёмный

Best Way To Strip Old Jon Boat Paint 

Send It Jon Boats
Подписаться 42 тыс.
Просмотров 65 тыс.
50% 1

Project Bottomland Bateau Episode 9:
In today's video, we are going to show you the best way to strip old jon boat paint. The previous owner of project Bottomland Bateau was nice enough to leave us with about 6 layers of paint to remove dating back from 1979!!! It took some effort but we got it all off eventually. Follow along as we test some different paint strippers and paint stripping methods, and find out which one we liked the best.
Watch the entire Project Bottomland Bateau Series:
• Introducing... Project...
Check out great deals and discounts from our channel sponsors:
10% off promo code for Freedom Lube, The most American oil you can buy!
Visit www.freddomlineproducts.com
Use promo code: ATF10
Link to One Hit Wonder Paint:
www.ohwpaint.com/discount/ATF...
Get 5$ off your OHW order use code: ATFHYDRO
Camera gear we use:
Camera Lenses: amzn.to/36rcdE4
Camera Mount: amzn.to/2GqMroQ
Flex Mount: amzn.to/2tIDLHY
Flex Tripod: amzn.to/2ux7CTB
Tall Tripod: amzn.to/36xUgUF
Lav Mic: amzn.to/2t27awm
Products used in the boat repair video series:
Kreg Rip-Cut saw attachment: amzn.to/35PHhxq
Jigsaw blades: amzn.to/2DCjLb4
Straight cut router bit: amzn.to/2ODUMut
Wood glue: amzn.to/2R7DxTN
Wood clamps: amzn.to/2Y6aW2C
Fiberglass resin: amzn.to/2qbD5Jl
Chip brush: amzn.to/380rbTN
10X20 Canopy Cover: amzn.to/2Gzyqsq
Standard Rivet Gun: amzn.to/32afGFW
Large Rivet Gun: amzn.to/33rFeyj
¼ Inch Sealed Rivets: amzn.to/2MBQTEb
3m 5200 Sealant: amzn.to/2McyOgP
JB Marine Weld: amzn.to/2B91iC0
Brazing rods: amzn.to/2nGoa8A
Brazing Flux: amzn.to/2OGsgZz
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Rivets: amzn.to/2PJwccl
Welder: amzn.to/2C7OLiv
Welding helmet: amzn.to/2WLNY0k
Welding gloves: amzn.to/2PIMRgo
Angle Grinder: amzn.to/2qglTC0
Flap Disc: amzn.to/2qmaMY4
Float Pods: www.explorebeavertail.com/pro...
22 Inch Light Bar: amzn.to/37zNboI
11 Inch Light Bar: amzn.to/2N2wiJS
LED Navigation Lights: amzn.to/30HJv2J
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE

Опубликовано:

 

31 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 95   
@davidhain2996
@davidhain2996 2 года назад
Hi, I am in the process of stripping a 14-36 johnboat - I'm using Citristrip spray then using a shopvac to literally suction the loose paint off - very little scraping needed
@SendItJonBoats
@SendItJonBoats 2 года назад
Thats a cool idea, I will have to try that.
@DJJoeFreitas
@DJJoeFreitas Год назад
Easy Off Oven Cleaner stripped multiple layers off my aluminum boat.
@SendItJonBoats
@SendItJonBoats Год назад
Yeah someone else mentioned easy off after this video. I will try that next time for sure
@MrCableguyken
@MrCableguyken 10 месяцев назад
Airplane stripper in liquid form works great. We use a layer of newspaper or two soaked in it laying on the paint and covered with plastic.
@SendItJonBoats
@SendItJonBoats 9 месяцев назад
I tried the spray and it did not do anything. I might try the liquid next time.
@florida__jack
@florida__jack 3 года назад
Very nice video👍 Stripping paint can be such a headache. After Citristrip failed to remove my boat’s paint, I found a old hack.... Heavy Duty Oven Cleaner! Worked great for me💪
@SendItJonBoats
@SendItJonBoats 3 года назад
Man I wish I would have known about the oven cleaner because I sure would have tried it. That 1970s boat paint was no joke!!! Took forever to get it all off and was even harder to get the 6 layers off the bottom. Got a video coming on that very soon.
@florida__jack
@florida__jack 3 года назад
@@SendItJonBoats If you want to see the oven cleaner in action, I uploaded my restoration video two weeks ago. Glad to have found your channel and I look forward to your upcoming videos👍
@SendItJonBoats
@SendItJonBoats 3 года назад
@@florida__jack I will check that out, thanks for the tip, I will use that one next time. Next time I am in Florida we will have to hang out!
@n2bfw884
@n2bfw884 Год назад
Great video. Thank you!
@SendItJonBoats
@SendItJonBoats Год назад
Glad you enjoyed it. Thanks for watching
@peterkolovos3079
@peterkolovos3079 3 года назад
I wish you were local because I'd love that light bar on my Lowe 16' Big Jon.
@SendItJonBoats
@SendItJonBoats 3 года назад
Thanks peter, I will be hooking that thing up soon and getting it mounted. Can't wait to see how it looks in the dark.
@Murphyslawfarm
@Murphyslawfarm 3 года назад
G'day the best I have found for a lot of old paint is Brake cleaner or Oven cleaner but both will stain aluminium dark grey.
@SendItJonBoats
@SendItJonBoats 3 года назад
I did not know about the oven cleaner until another viewer told me about it. I may have to try that on the next one. Sandblasting worked great it was just expensive and a long process.
@meldeer6253
@meldeer6253 22 дня назад
i dident think the stencel job was all that bad .. what are the aluminum tanks or box's you have on the end of the boat
@craig8212
@craig8212 2 года назад
Great job on boat really like the videos! I’m getting ready to start the exact same project for my duck boat and I need to blast it when using the fine grit coal slag did you have any issues with warp or heat? I also need to weld a couple spots do you think this media will have any negative reaction to the weld process?
@SendItJonBoats
@SendItJonBoats 2 года назад
I would wire wheel the areas you need to weld first, do all your welding, then sandblast afterwards.
@feellnfroggy
@feellnfroggy 3 года назад
Tal-strip from Napa. Looks like your 3rd sample. Old version was hands down best.
@SendItJonBoats
@SendItJonBoats 3 года назад
Yeah the old stuff worked real well, I used to use it but I couldn't find it anywhere. This boat had some serious old paint on it... where it stuck it was stuck on there good, but the rest of it was chipping and flaking so I did not trust it, which is why I wanted it all off.
@centralcoaster33
@centralcoaster33 Год назад
I have the same ringtone as you. I just stopped your video, to check my phone, while yours was ringing, because I am an idiot.
@SendItJonBoats
@SendItJonBoats Год назад
I almost just spit my coffee out thinking about you getting up to check your phone. LMAO that is awesome.
@Ethan-yw8bt
@Ethan-yw8bt 9 месяцев назад
What should the aluminum surface look like after sandblasting it? This will be my first time and want to make sure I don't strip any of the aluminum off but also strip enough. Using the same materials and tools you are.
@SendItJonBoats
@SendItJonBoats 9 месяцев назад
Really rough, almost like sandpaper if you do it right.
@mdpenner
@mdpenner Год назад
what about a wire adapter on angle grinder?
@majorwinters5539
@majorwinters5539 Год назад
How long can you leave the bare aluminum? I painted my boat and totally messed it up and want to strip it but don’t want to repaint until spring.
@josecruz021
@josecruz021 11 месяцев назад
Good question, I'm getting ready to fix up a jon boat i bought and kinda wanna get the Sanding and stripping and all that done before i get around to painting. And idk when I'll get around to paying
@josecruz021
@josecruz021 11 месяцев назад
Painting*
@jaredk777
@jaredk777 3 года назад
I used citristrip and my boat had 4-5 layers of boat paint, latex, and who knows what else. The trick is to flip your boat upside down, and after a thick coating is spread on cover it with tin foil. Let it sit over night and it’ll scrape right down to aluminum
@SendItJonBoats
@SendItJonBoats 3 года назад
Yeah I wish I would have had more time to mess with it, that paint was a paint in the butt.
@Anthony-du3he
@Anthony-du3he 3 года назад
Explain this in more detail please. Flip boat upside down, than Apply stripper and immediately apply tin foil over top the stripper? Let sit than scrape off? Thanks
@jaredk777
@jaredk777 3 года назад
@@Anthony-du3he yeah so I flipped it upside down so the stripper was easier to apply. Then apply a thick coat of it on, and cover it with aluminum foil. If it’s out of the sun you can let it sit for 24 hours, in the sun that’s too long and the stripper will start to dry. I then used metal or plastic scrapers and scraped most of the paint off. I also used acetone to clean it and get some remnants of paint off. Then used a brass wire wheel to get the hard parts. I’m actually still working on it. I’m hoping to start sanding tomorrow.
@SendItJonBoats
@SendItJonBoats 3 года назад
@@Anthony-du3he I used plastic, not tin foil. BUt yes the plastic helps keep the stripper wet so that it does not evaporate too quickly.
@dorantes0106
@dorantes0106 2 года назад
@@SendItJonBoats scrape then pressure wash...
@howingtonfarms6688
@howingtonfarms6688 3 года назад
So what paint stripper did you end up using on the bottom?
@SendItJonBoats
@SendItJonBoats 3 года назад
Kwik Strip regular gel, worked great
@frededwards8386
@frededwards8386 2 года назад
I painted my boat upside down using leaves and wheat stalks. I used Rustoleum Enamel paint. But i sanded the entire boat with a 6"disk sander. Dont know how to attach a pic or i would
@SendItJonBoats
@SendItJonBoats 2 года назад
Cool.
@alabamaoutdoors4468
@alabamaoutdoors4468 2 года назад
Bought KV stripper from lowes works good
@SendItJonBoats
@SendItJonBoats 2 года назад
I will have to try that next time. The stuff I used sucked.
@alabamaoutdoors4468
@alabamaoutdoors4468 2 года назад
@@SendItJonBoats leave it on 30 mins spray off with hose pipe , beats sanding
@kx85isweet
@kx85isweet Год назад
does it weaken the aluminum?
@SendItJonBoats
@SendItJonBoats Год назад
No
@johnhamilton9229
@johnhamilton9229 11 месяцев назад
Citrus trip. That’s the one.
@SendItJonBoats
@SendItJonBoats 9 месяцев назад
Yup thats it!
@markwhittle6175
@markwhittle6175 2 года назад
What size compressor do you need?
@SendItJonBoats
@SendItJonBoats 2 года назад
I run an 80 gallon 7.5 hp and it runs a good bit with that blaster.
@michaelryanarmstrong
@michaelryanarmstrong Год назад
The sound at 2:48 nearly killed me
@SendItJonBoats
@SendItJonBoats Год назад
gotta keep you on your toes while watching videos
@dudeethan2593
@dudeethan2593 2 года назад
What sandpaper did you use
@SendItJonBoats
@SendItJonBoats 2 года назад
I didn't use sand paper. I used a sand blaster. fine grit coal slag.
@greggmeyer5836
@greggmeyer5836 10 месяцев назад
What are those things hanging on your wall behind you?
@SendItJonBoats
@SendItJonBoats 9 месяцев назад
Speed shapes, they are from my old hydro dipping shop.
@sedali5882
@sedali5882 2 года назад
Would you scrape a new boat paint before you paint it?
@SendItJonBoats
@SendItJonBoats 2 года назад
Only if the paint is no good or uts peeling or flaking off.
@sedali5882
@sedali5882 2 года назад
Thanks for responding so I did paint my 2020 boat with rust oleum paint spray but I don’t like the color and I want to pain it darker color. Would you sand it down to the original paint or just smooth it enough with like 220 or 300 sand paper then the new paint?
@thegreatwhitegoat2882
@thegreatwhitegoat2882 2 года назад
Gotta use aircraft paint stripper thats in the can. Apply with brush and watch it melt right off.
@SendItJonBoats
@SendItJonBoats 2 года назад
I will have to try that next time, the spray stuff sucked and was really expensive.
@thegreatwhitegoat2882
@thegreatwhitegoat2882 2 года назад
Jasco's work really well.
@beorbeorian150
@beorbeorian150 2 года назад
Not working very well for me so far / and over $ 50 a can.
@SendItJonBoats
@SendItJonBoats 2 года назад
@@beorbeorian150 Holy crap thats expensive!
@Anthony-du3he
@Anthony-du3he 3 года назад
How do i strip lead paint off an old 70’s 80’s metal boat? Everything i try isnt cutting it. Ill forever stripping the boat.
@SendItJonBoats
@SendItJonBoats 3 года назад
Do like I did and get it sand blasted... will cost a few hundred but well worth it and much easier.
@Anthony-du3he
@Anthony-du3he 3 года назад
@@SendItJonBoats thankyou
@justinmuschaweck7625
@justinmuschaweck7625 3 года назад
Acid tone
@SendItJonBoats
@SendItJonBoats 3 года назад
Yeah I tried that and it didn't do much.
@tedcraig6116
@tedcraig6116 3 года назад
Being from Illinois, you can keep your man card. We just want the taxes you owe us from breathing our air. Send payment to Springfield Illinois. Also note Southern Illinois is basically it’s own state; so don’t confuse “pop” for the real term, used in So I’ll, “soda”.
@SendItJonBoats
@SendItJonBoats 3 года назад
LMAO... aint that the dang truth! Yall got some funky taxes up there from what Nate was telling me. Yall can keep the taxes and all the stupid snow! We would die in the south with that much snow!
@zakaroonetwork777
@zakaroonetwork777 2 года назад
Do people celebrate “Pops Day”? Or do they call it “ Father’s Day”. My Pops would like it if I sprinkle some of his ashes out in Buffalo.
@alexislaisney3749
@alexislaisney3749 Год назад
Seems like Illinois needs to be liberated.
@bogdanb1196
@bogdanb1196 2 года назад
i dont comment freedom of choice. but there is alternative. ask ur GP
@SendItJonBoats
@SendItJonBoats 2 года назад
oh okay, thanks!
@dennislanning8076
@dennislanning8076 2 года назад
Soda blaster ...
@SendItJonBoats
@SendItJonBoats 2 года назад
Yeah that would be nice if I owned one.
@dennislanning8076
@dennislanning8076 2 года назад
@@SendItJonBoats just send it !...lol
@jerrystevens1865
@jerrystevens1865 3 месяца назад
Most everything that you done to your boat, the stripper test, stenciling stuff, etc., all turned out bad. Had you stood the boat up on it's side and performed all test$ and task$ with the work surface on flat horizontal table top attitude, do you think each task would have turned out different? Lite weight boat would have been easy to just slide off the side and lean on trailer and work your artistic magics.
@bogdanb1196
@bogdanb1196 2 года назад
it took 6 min. before u came back to the subject
@SendItJonBoats
@SendItJonBoats 2 года назад
Thank you.
@anthonyortiz4538
@anthonyortiz4538 2 года назад
This is slightly disheartening, I have an intercooler I’m trying the least aggressive way to remove the paint but seems like the strippers aren’t my best bet
@SendItJonBoats
@SendItJonBoats 2 года назад
It's worth a try, Just did not work that great on this boat paint.
@dorantes0106
@dorantes0106 2 года назад
If you do it correctly, they work great. Unfortunately this video didn't do it right.
@SendItJonBoats
@SendItJonBoats 2 года назад
@@dorantes0106 Explain to me how it wasn't done right?
@MrWillumPovy
@MrWillumPovy 3 года назад
Better your stencils didn't work out, they were hideous. Why would you do that to your boat.
@SendItJonBoats
@SendItJonBoats 3 года назад
Yeah Im glad they didn't work out, they looked like crap. I like my way much better it was just very labor intensive.
@Justin-op8gg
@Justin-op8gg Год назад
“Why are all they guys questioning and looking at other guys these days?????” We’ll people- this is why. All those chemicals we don’t care about entering the environment.
@Justin-op8gg
@Justin-op8gg Год назад
The mask is a cute touch...
@Justin-op8gg
@Justin-op8gg Год назад
Hope you enjoy your kids running around in that chemical mess of a yard
@SendItJonBoats
@SendItJonBoats Год назад
LOL
@Justin-op8gg
@Justin-op8gg Год назад
A typical response from a country where being straight is not so typical.
Далее
100❤️
00:20
Просмотров 6 млн
KO’P GAP ESHAKKA YUK!😂
00:57
Просмотров 684 тыс.
Прилетели в Дубай
00:17
Просмотров 74 тыс.
The Easiest Way to Remove Paint to Bare Metal!
22:56
Просмотров 267 тыс.
Fixing the leaky Abandoned Aluminium Boat
15:07
Просмотров 666 тыс.
Camo Paint a Jon Boat LIKE A PRO || Part 1
12:24
Просмотров 69 тыс.
Repairing Damaged/Cracked  Aluminum Jon Boat hulls.
12:32
The BEST Way to REMOVE Old Paint!
12:02
Просмотров 98 тыс.
100❤️
00:20
Просмотров 6 млн